Simple Qustion: No data shown in the retrieval of Sample.Basic database

Hi All,
I'm a very beginner to Essbase, I'm getting started with essbase add-in tutorial, when I retrieve the data from Sample.Basic, it only returned the dimension names, there is no data in the intersections, it show #Missing in the cells, the tutorial shows there are data in the sample.basic database, why am I not able to get it displayed?, thank you so much
the following is how it displayed after I retrieved the sample.basic:
Measures Product Market Scenario
Year #Missing
Maybe I did not configure the option items correctly?
Best Regards.
Edited by: user13125772 on Jun 11, 2010 1:54 PM

Just a comment about my nemesis' note:
You need to load data and potentially calculate it (I know Cameron you don't but it does not hurt).^^^The reason you don't need to calculate the data is because CALCDAT.txt already contains the consolidated results. Glenn is correct in saying that calculation doesn't hurt, but there's really no point.
FWIW, the reason there's no point is because CALCDAT.txt is a full export of Sample.Basic, that is, every valued data point is contained within the data file. Thus, when calculation occurs it just overwrites the data values that were already loaded.
As we are talking about a second or so to do the calculation, this matters not a whit, but I thought it might be instructive when you finally get to a real database. Full exports, when loaded back into an empty Essbase database, do not need to be recalculated.
Regards,
Cameron Lackpour

Similar Messages

How to get ONLY the data shown in the plot area (Chart)

My chart history length are 120000, often I don't need to save the whole
buffer, just the data shown in the plot area?
Richard Pettersen

Hi Richard,
you haven't said which version of LabVIEW you're using, so I've assumed 6.1, although this should be fine for older versions too.
I put down a chart with a scrollbar, so I could go through the old data, and put an indicator attached to the x-scale->Range->minimum and x-scale->Range->maximum. These followed the displayed elements in the chart as I scrolled through the data. You can therefore link in the chart history (history data property of the chart) with a array subset to retrieve the appropriate portion.
Be aware though. The minimum and maximum that the chart is showing on the x-scale may not be a part of the history data. E.g. if I set the history length to 1000 points, and produce on the first run, 1000 points, then my minimum and maximum are a
t say 899 and 999. I then produce a second set of data, 1000 points long, and my min and max move to 1899 and 1999. As my history data is only 1000 long, I can scroll back to 1000 OK, but my min and max used as indexes don't relate anymore. The array of data is from 0 to 999, but my indexes can run from 1000 to 1999. So I have to add in a check that sees how much data is available before attempting to index, and then it's down to the flow of the program to try to work out where the data actually is (I'll leave that one to you - you'll need to keep track of the history data compared to the maximum (shown just after a point is added though this then makes a mess of your data! - possible to keep a track of new minimum when adding new data : the maximum (which will show once new data goes on) minus the history length gives the minimum that can be scrolled to - subtract this from all max's and min's to get real offset into the data - history length can be got from the history data and an a
rray size sub .vi)
Obviously there's no problem if you're clearing the graph everytime you either plot new data, or reach maximum capacity on the history data as the indexes return to zero.
Hope that helps
S.
// it takes almost no time to rate an answer

Is it possible to add the YEAR to the date shown in the Lockscreen?

TIA.

Hi,
We cannot display the year information on Windows 8.1 Lock Screen.
The behavior is by design.
Thanks for your understanding.
Regards,
Kelvin Xu
TechNet Community Support

Last payment date shown in credit master sheet is wrong.

Hi,
The last payment date and amount in the credit master sheet S_ALR_87012218 does not reflect the true last payment info. As per the payment history list, there have been more recent last payments after the last payment date shown on the credit master sheet, however i dont know why the actual last payment info is not being shown on the credit master sheet.
Can someone help?

Hi
When running credit master sheet make sure you are looking into correct credit control area where the payment has been entered. I am sure to update credit master sheet you do not need to run any program, this report updates figure online (at the same time). If you want to make sure its working take any customer having outstanding invoice on account. Make entry using transaction F-28, go back to credit mast sheet correct credti contrl area and you will be able to see updated amount.
I don`t know what t.code you are using to do incoming payment entery? Balance will not be updated properly in the reports if you are using wrong posting keys. Posting Key should be 15 inorder to update correct balance on customer report.
Hope this will help

Can you change format for dates shown in edit bar

Hello,
I am trying Numbers out as a replacement for Excel. But there is one annoyance that I don't like. I have a date column (formatted as a UK date DD/MM/YY).
However when I select the date to edit it the date shown in the formula/edit bar is shown with the month in character form, e.g. 04 Jul 09.
I find this annoying and I want the date shown there as an all digits date like with the value displayed in the cell.
Does anyone know if I can change this? If so how?
Thank you.

OK.
I didn't understood this way.
You are lucky if it's your unique problem.
Look at what I get here:
Yes, it's my exact birthday but it is displayed a silly way. Isn't it ?
It's awful when I must edit a date.
When I reported that, I was responded that it's the normal behavior.
Happily, it doesn't behave this way under 10.6
Yvan KOENIG (VALLAURIS, France) vendredi 25 septembre 2009 18:57:15

How to Find the Data Type of the Field In a Database Table

Hi Experts,
I'm currently working on a program which needs to find out the data type of the given field in a database table. In addition to accessing DD03L directly, is there any other workaround such as function module to help me achieve this? It would be helpful if a demo example could be provided.
Thanks a lot.

Hi,
Use this..
DESCRIBE FIELD dobj TYPE typ.
write typ.
type will contain the data type of the object.
and check this thread also....
Re: How to get datatype of fields in dynamic structures
Cheers,
Simha.
Reward all the helpful answers..

Retrieving sample basic using Excel add in

Hi I am having problems accessing the sample basic database using excel, I see the sample basic in Application/Database and I get an error which states that "Unable to load database[Basic]". I get this error for all the the sample databases. The system administrator said the databases were installed with the essbase, but I still can't retrieve them. Anyone has any suggestions as to why this may be occurring.Thanks,

It's not a problem with the Add-In.The database was not Installed correctly. You need to rebuild the Sample Basic application. Can you check to see if all the DB files were installed.Look in the C:\essbase\app\Sample\Basic directory you should see these files, or atleast the outline.Basic.otlBasic.indBasic.esmBasic.tctEss000001.INDEss000001.PAGDo you know how to do this? If you want e-mail me and I'll walk you through it.Regards,Corey BidmeadClarity [email protected]

HT4623 I have an iPod with iOS 4.2.1 and would like to up date version 5. The pc I normally sync with has XP operating system. So I can't up date to iTunes 10. And my iPod doesn't show the software update button shown in the article. What can I do?

I have an iPod with iOS 4.2.1 and would like to up date to version 5. The pc I normally sync with has XP operating system. So I can't up date to iTunes 10. And my iPod doesn't show the software update button shown in the article. What can I do?

You cannot update it if you can't get the latest version of iTunes. Actually, the latest version of iTunes will run in XP if you have Service Pack 2. Also, you posted in the iPad forum, and your profile shows you have an iPad, but in your post, you say it is an iPod. Is it an iPad or an iPod?

Creating remote objects and passing the retrieved data to modules

I found at this Adobe tutorial a nice "RemoteService" class that creates a RemoteObject and contains the functions for handling the result and fault events. If I wanted to use this approach, how could I pass the data from the result handler to interfaces that modules from the main application could use?
I could put the RemoteService/RemoteObject in the modules, but (in my opinion- and I could be wrong) the best design seems to be using the remote calls in the main app and passing the data along to the modules.
Ultimately, I would like to know what the "best practices" are for creating remote objects and passing the retrieved data to modules
Thanks!

public void mouseClicked(MouseEvent e) {
X x = new X(e.getX(), e.getY());
}I don't see the difficulty.

No Data Shown because an error occurred while running the query

Discoverer 10gR2 using Plus on Firefox:
I have one workbook. The first sheet summarizes by Vendor. Parameters are Type, Category, Vendor (all optional) and mandatory date range.
The second sheet summarized by Vendor and Model. Parameters are Type, Category, Vendor, Model (all optional) and mandatory date range.
All parameters except the extra "Model" are shared between the sheets.
When I run the Vendor sheet, parameters pop up, I put in dates and leave the rest blank. Results display. Yeah!
When I then run the Model sheet, parameters pop up again (because it has one more parameter). Dates carry forward, leave the rest blank. I get the error No Data Shown because an error occurred while running the query. Refreshing does not help.
If I click back to the Vendor sheet, then come back to the Model sheet, no parameter screen and the query runs.
Booooo.
Have tried multiple DBs, multiple EULs, multiple underlying data sources, replacing the offending parameter with a whole new one, no difference.
Has any body run into this behavior? Is there an answer?
-- Ron Olcott, Business Intelligence Product Manager

What about trying this. On the parameter definition, you have a section on the bottom left of the Parameters window, called "Do you want to allow different parameter values for each worksheet?". When you say in your posting that all but the Model parameter is shared, I assume you mean that you have set this section value to "Allow only one set of paratmeter values for all worksheets". Try setting this to "Allow different parameter values for each worksheet". See if that might make a difference for you. If that works, you may have to leave the option at this, as the lesser of your evils. From my limited experience, the "Allow only one set of parameter mvalues for all worksheets" is a bit flaky in how it works. So I pretty much have gone to always saying to allow different parameter values for each worksheet. Hope this helps a bit. If worse comes to worse, if you have not done so already, log a service request with support and see what they say. Good luck.
John DIckey

No data Exists error while retrieving the data from a table

Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

RSA1 Error during the retrieval of the logon data stored in secure storage

Hi Gurus,
when i go and check Source system the connection is OK, and RFC's from BI to R/3 and R/3 to BI is OK (including Authentication).
but when i go and check Info provider there one customized object ZDTSYS01 is there when i check and and activate it it is giving error as below.
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataStore Object ZDTSYS01
Creating Export DataSource and dependent Objects
The creation of the export DataSource failed
Reading the Metadata of ZDTSYS01 ...
Creating DataSource 8ZDTSYS01 ...
Error during the retrieval of the logon data stored in secure storage
Error during the retrieval of the logon data stored in secure storage
Error when creating the export DataSource and dependent Objects
Program ID DC4B105KR4QT1KDW9HD7AXYEO retrieved for DataStore object ZDTSYS01
Error when activating DataStore Object ZDTSYS01
Deletion of Unused Dictionary Objects ( 3)
please help me solve this issue
Thanks in advance
venkat

Hi,
1). Looks like SM59 Remote user has some issues. Can you check whether the user's are locked ?
2). You can also correct this is TA STMS. Here you navigate to "System Overview (Shift+F6)".
On the following screen, you select "Generate RFC DESTINATIONS" which can be found under "Extras".
3). Please click on source system and restore the BW source system
Please check the below 2 SAP Notes.
538052 and 644015.This might solve your problem.
Thanks,
Arjun

Allow a simple form with "data" to be saved by the user.

Back in version -x, it used to be so simple. You created a form that could be read in a web browser. Users could could fill out the form and save the form to their computers with their data. Since that first version that allowed that, Acrobat has not progressed in logical fashion. In a later version, you couldn't save the data. Then in another version, you could again save the data. Now you have some nice interactive features. I appreciate the new developments and see where they could be a godsend. However, the simple thing that I used to be able to do in version -x, and the thing I most want to do, I can no longer do and it is frustrating.
Here's the situation: we have an announcement on the web for Vacation Bible School. We want to have a pdf with a form that people can fill out online and save to their disk (as their copy of the registration form) and then print out one copy of the form so that they can send it along with their check for the registration fee. Why should that be so difficult?
If it weren't for the fact that people have to send in checks, one of the fancy new options would work. But it is not applicable in this situation.
Here are my current options:
I can "distribute" an emailable form (which I don't want to do) and then explain to the user that they should not hit the "submit" button but save the file to their disk. (First rule of public relations - Don't confuse the public!) It works in the last version of REader 8+ and in Reader 9.
I can save the form without distributing it. But the user can't save it with the data!
Please, PLEASE, PLEASE. Allow a simple form with "data" to be saved by the user.
Peace and blessings
Barbara

Thanks for a quick response.
In Acrobat *8 or 9 Professional you can enable a form to be activated with the save feature.
How do you do this. When I saved the form without distributing it, and opened the form up in Acrobat Reader, the header said specifically that the data could not be saved in the form. And when I went to save it, I got the message in a popup that said "Data in this form will not be saved. Reader can only save a blank copy of this form." Then a second message (with a light bulb) said: "Please print your completed form if you would like a copy for your records."
So, if in fact I can have the form (without "distributing" it) so that the user can save the form with the data, how do I do that? Are there commands I use, options? Please let me know. I will be eternally grateful.
Also, if you edit form fields, you may remove the submit button.
The edit form fields does not offer any access to the submit button.
Best,
Barbara

I recently purchased an Iphone 6plus and I am receiving pdf attachments that are shown as winmail.dat attachments on the phone. When I check e-mail via my macbook pro the attachment is a pdf and I can open it. Why is this happening?

I recently purchased an Iphone 6plus and I am receiving pdf attachments that are shown as winmail.dat attachments on the iphone. When I check the same e-mail on my macbook pro the attachment is a pdf and I can open it. Why is this happening?

I had this problem too after i upgdatd to OS X Mavericks... only the songs on my iphone 5s that i purchased from itunes would play.
i read something about it being a syncing issue. when you plug your phone into your computer with the usb cable, the person said to switch from automatic syncing of itunes to the "manual" option. mine was already set to manual so i wasn't sure anything would work. BUT, when i plugged my phone into my computer, it started to sync all of my music on my phone again (top of itunes bar where song playing/time is listed said "now syncing 123/534 songs to x's iphone"). once that was completed, i checked the music app on my iphone and everything was back to normal!
so, i would suggest setting your music syncing settings to manual if you haven't tried that yet!
hope this helps!

How to save the retrieved data in a subscreen...

Hi,
I understand that the subscreen has to be created in transaction se51. However, i dont have any idea how to use it and incorporate it in my main program.
Im trying to figure out how to place all the data retrieved in a subscreen where the user has an option to remove files that are not necessary.
For example:
The user enters a single transfer order, multiple transfer order, or a range of transfer orders. Retrieve transfer order number (TANUM), transfer order item (TAPOS), TO quantity (VSOLM), and Material Number (MATNR) from table LTAP where field tanum = transfer order. If no data is retrieved, an error message will prompt the user to enter a valid transfer order.(<-- I already coded this part)
***The data retrieved will be placed in a sub-screen where the user has an option to remove files not needed to be printed. (<--i havent started this one)
Kindly provide me a sample code or a step by step process. I would really appreacite your help.
Thank you very much.
Regards,
Tim
Message was edited by: Maan

Hi Tim,
first a warm welcome and congratulation for your first post.
Because this is the forum for Samples and Downloads it is not really clear what you are doing. Do you develop an ABAP Dynpro, a BSP or a Web Dynpro?
I think the chance of an answer is much bigger if you post your question in the ABAP/BSP or Web Dynpro Forum.
Hope that helps
Best regards
Renald

Simple Qustion: No data shown in the retrieval of Sample.Basic database

Similar Messages

Maybe you are looking for