Simple SLB with the ACE Module

Hello,
i have some problems with a ACE module i am currently tesing.
I have a simple Serverfarm with two Servers.
But there seems to be some Problems with the Loadbalancing i not understand:
1) I use Round Robin, but the ACE seems to put me serval times to the same server. I notice this, because i have different content on both servers, also different URLs.
2) withz the show serverfarm statement the total connects do not increment.
switch/slb-c1# show serverfarm webfarm
serverfarm : webfarm, type: HOST
total rservers : 2
----------connections-----------
real weight state current total
---+---------------------+------+------------+----------+--------------------
rserver: web1
10.0.33.201:0 8 OPERATIONAL 0 0
rserver: web2
10.0.33.200:0 8 OPERATIONAL 0 0
switch/slb-c1# show service-policy L4_LB_VIP
Status : ACTIVE
Interface: vlan 300
service-policy: L4_LB_VIP
class: L4_VIP_CLASS
loadbalance:
L7 loadbalance policy: L7_SLB_POLICY
VIP Route Metric : 77
VIP Route Advertise : DISABLED
VIP ICMP Reply : ENABLED
VIP State: INSERVICE
curr conns : 0 , hit count : 15
dropped conns : 0
client pkt count : 10198 , client byte count: 420991
server pkt count : 23367 , server byte count: 34915173
I have attatched the Config.
Any Idea what is going on?

what version do you have ?
I would recommend to run the very recent A1.4.
This is something that really should work.
Gilles.

Similar Messages

A problem with ACL in the class-map on the ACE module

Hi all,
I configured the following on the ACE module:
object-group network test
host 192.168.1.21
host 192.168.1.22
host 192.168.1.23
object-group service port
tcp eq www
tcp eq 8080
access-list T line 8 extended permit object-group port object-group test any
I tried to configure a class-map for matching this ACL:
ACE-4710-2/Lab-OPT-11(config)# class-map match-any TEST_C
ACE-4710-2/Lab-OPT-11(config-cmap)# match access-list T
Error: Cannot associate acl having object-group ACEs in class-map.
So couldn't I configure the class-map by using ACL with object-groups involved? Is it the bug or the normal behaviour? Because the customer uses object-groups in ACLs and he has to configure ACL without object-groups for the traffic classification. It is horrible.
Thank you
Roman

Hi Roman,
I'm afraid it's the expected behavior. You cannot use an ACL with object-groups inside a class-map.
Regards
Daniel

Some issue with the Function Module u0093'SKWF_FIND_BY_QUERY' in a BW ECC6.0

Hi All,
Need some urgent help..
Iam facing some issue with the Function Module 'SKWF_FIND_BY_QUERY' in a BW ECC6.0 system.
As shown below, in the function module, the Table IT_PROPERTIES_RESULT gets populated with some values based on inputs like IT_CLASSES, IT_QUERY, and L.
This updation of IT_PROPERTIES_RESULT table is happening for some of the services sent through IT_QUERY and is not getting populated for some.
call function 'SKWF_FIND_BY_QUERY
exporting
CONNECTION_SPACE         =
    OBJ_TYPE                 = 'L'
PTYPE                    =
X_STRICT                 =
IMPORTING
ERROR                    =
     tables
     CLASSES                  = IT_CLASSES
     QUERIES                  = IT_QUERY
     RESULT_OBJECTS           = IT_LOIO
PROPERTIES_REQUEST       = PROPERTIES_RESULT        = IT_PROPERTIES_RESULT.
The values are as follows:-
Values getting populated in IT_CLASSES BW_LO_TRAN               Values getting populated in IT_QUERY 1) BW_QUERY, 2) /BIC/ZSERVICE
I would like to know whether any Standard Customizing BW transaction is present that is maintaining IT_PROPERTIES_RESULT table properties and fetching through this Function Module.
Also, suggest how this issue can be resolved
Thanks & Regards,
Shailesh nagar

Thanks Suhas. That definitely helped.
Also the following links helped.
http://help.sap.com/saphelp_nw70/helpdata/EN/86/1c8c3e94243446e10000000a114084/frameset.htm
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Cheers,
Preethi

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I h

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I have posted several times on the forum with no responses to address this, and have seen others with the same issue. I have even gone as far as to do a complete re-install of LR5, with no success. I'm at a loss, and I depend on it for so much editing. Please help.

Reset your preferences file: Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
Report back if that doesn't work.

RTC-5190: There is no location associated with the current module ...

Hello,
First to know, my experience with OWB is very limited.
I have a OWB version 10 repository and I have to import a *.mdl file (using ./owbclient.sh). The import went fine and it consists in a Databases->Oracle module with some mappings, tables sequences etc.
Now I want to Deploy some objects but I receive a error:
"RTC-5190: There is no location associated with the current module, operation abandoned."
I've created a location and I've edited the imported module to associate it with the location (right click on the module->Open Editor) in Metadata Location and Data Location tabs, but it still throws the error when I try to deploy. Do you have any idea what can I do more?
Thank you,
Adrian

Hello,
The .mdl file was generated by somebody else and I can't request another export. And also I didn't found any "import locations" check.
Anyway, at import I've seen a warning message about a location that it can't find. So I've renamed the location to be the same with the one that can't be found. This way the initial error is not thrown. But in Control Center Manager in Job Summary there is a java error about the results being exhausted. God for me that I had the idea to restart the OWB client and now it works fine.
OWB is such a bad product!
Thanks guys.

Problem with the function module SO_DOCUMENT_SEND_API1

Hi Friends,
I am facing the problem wiht the function module SO_DOCUMENT_SEND_API1,
My actull requirement is : - i need to send the sap data to my externa mail id (Like as XYZ@) with out the any attachment , So i have implemented the code with the function module SO_DOCUMENT_SEND_API1.
The mail has successfully sent the sap inbox (SOST) but the mail are not reached to the external mail ID'S( XYZ@GMAIL)
i Have maintained my code lines same as below.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data = wa_doc_data
      put_in_outbox = ca_x
      commit_work   = ca_x
    TABLES
      packing_list = tb_packing_list
      contents_txt = tb_mailbody
      receivers     = tb_receiver.
Can you please tell me soultion ,
Thanks
charan.

Hi charan,
                  If u r able to see the mail in sost, then i think ur code has worked fine. if the mail is not going to outside domains from sost u need to do some configurations for that, u can find lots of configuration docs regarding mail setup in sap.
once try to pass below parameter also.
t_receivers1-rec_type = 'U'.
For configuring mail setup u need to sit with ur basis guy.
Moderator message: please do not use SMS speak.
Edited by: Thomas Zloch on Nov 23, 2010 5:51 PM

Could not complete the ... command because of a problem with the filter module interface

I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
Stu

Not sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu

Can't use certain filters- "problem with the filter module interface"

Hello,
I frequently use the BPelt Flatten and Multifill plugins and they have always worked perfectly until today. Now I get the following error: "Could not complete the [Multifill/Flatten] command because of a problem with the filter module interface."
I use Photoshop CS6 Extended with the Creative Cloud membership, and just recently updated to version 13.1.1 x64. I believe this may be related, as the plugins worked before the update and nothing else has changed. Any recommendations on how to fix this? Is it possible to undo the update?

Usually this means a bug in the third party plugin that you are using.

Ssh access into virtual context on the ACE module A(2.2)

Hello,
I tried to configure:
Admin(conf)#context test
Admin(conf-context)#ssh key rsa1 1024
but this command ssh is not supported int this newest version. How can I configure the ssh access directly into virtual context on the ACE module??
Thank you

Here's a link on how to configure it.
https://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/admin/guide/access.html#wp1049450
Hope that helps.

Is the ACE Module support IPV6?

dear all
is the ACE module support IPV6?
best regards

The ACE does not currently support IPv6 but it is being looked at to be added to the feature set.

Error with the function module REUSE_ALV_GRID_DISPLAY

Hi,
While using the fucntion module REUSE_ALV_GRID_DISPLAY
I am getting the below error.
Message i407(0k) with l_template_om.
message says 'Contact your system administrator. The following template is missing: sap_mm.123
Kindly provide me the reason why this success message is displayed for this function module.
Vijay

at first its an information message sind its of type I and not of type S which would be success.
this message is beeing displayed because that template is really missing, believe it when SAP talks to you.
So talk to your basis guys.
to come around this problem without talking to your basis guys, i´d propose to use CL_SALV_TABLE or CL_GUI_ALV_GRID to display an ALV.

Problems with the Application Module Pool

Hello,
We have an Oracle ADF Application working in a production enviroment. The application module pool seems to work properly during the first days, but after a few days, the application module pool seems not to work properly. We start to get some errors like JBO-30003: the application pool failed to checkout an application module.
We have included in the application a DumpPoolStatistics servlet, and what we have observed is:
1. When the application is restarted in the server, the "total number of application modules in the pool" is equal to "maximum number of application modules in the pool".
2. Several days after, the "total number of application modules in the pool" starts to decrease.
We don't know why the "total number of application modules in the pool" starts to decrease, but we think this is the reason of the errors. In fact, "total number of application modules in the pool" is lower than the "jbo.ampool.minavailablesize" parameter value.
The management of the application module pool is not a task of the developer, so we don't undestand where is the problem.
We have configured the application module with the next parameters:
<jbo.ampool.initpoolsize>10</jbo.ampool.initpoolsize>
<jbo.ampool.maxpoolsize>100</jbo.ampool.maxpoolsize>
<jbo.ampool.minavailablesize>10</jbo.ampool.minavailablesize>
<jbo.recyclethreshold>15</jbo.recyclethreshold>
<jbo.ampool.maxinactiveage>600000</jbo.ampool.minavailablesize>
<jbo.ampool.monitorsleepinterval>600000</jbo.ampool.monitorsleepinterval>
<jbo.initpoolsize>15</jbo.initpoolsize>
<jbo.maxpoolsize>30</jbo.maxpoolsize>
<jbo.poolminavailablesize>15</jbo.poolminavailablesize>
<jbo.poolmaxavailablesize>25</jbo.poolmaxavailablesize>
<jbo.poolmonitorsleepinterval>30000</jbo.poolmonitorsleepinterval>
<jbo.poolmaxinactiveage>30000</jbo.poolmaxinactiveage>
<jbo.dofailover>true</jbo.dofailover>
<jbo.ampool.resetnontransactionalstate>true</jbo.ampool.resetnontransactionalstate>
<jbo.ampool.doampooling>true</jbo.ampool.doampooling>
We are working with JDeveloper 10.1.3.4.
Thanks in advance!

Sorry, you are right, the number of application modules created whe the application starts is given by the jbo.ampool.initpoolsize. But what it is sure is that the "total number of application modules in the pool" starts to decrease. The number of days is not always the same. But we have to restart the application occasionally.
I think the time parameters are ok, I would like for example 10 minutes for pool resoruce cleanup, and 10 minutes for considering an inactive AM instance in the pool as a candidate for removal during the next resource cleanup.
<jbo.ampool.monitorsleepinterval>600000</jbo.ampool.monitorsleepinterval> --> 10 minutes
<jbo.ampool.maxinactiveage>600000</jbo.ampool.minavailablesize> --> 10 minutes
Is this right?

Is the ACE module is hot swapable?

can anybody confirm the ACE service module is hot swapable and either it can be placed in slot 5 in 6509 switch.

Hi,
The 6500 series supports hot-swappable modules and you can hot-swap the ACE blade in theory but you should shut it down prior to removal to avoid loss of data.
Slot 5 in a 6509 is reserved for the Sup720.
See http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/installation/note/aceinote.html
for more information.
HTH Cathy

Is the Nexys2 board (with spartan 3e FPGA) compatible with the FPGA module

Hi my name is DIego and I was wondering if anybody here knows if the NEXYS 2 board (with spartan 3e FPGA) from DIGILENT is compatible
with the LABVIEW FPGA module.
Thanks
Digilent is also the Manufacturer of the SPARTAN 3e STARTER BOARD

Diego:
The NEXYS 2 is not officially supported, but if you'd like to try it, you can attempt to follow the guide for the Spartan 3E here (substituting your NEXYS 2 for the Spartan 3E).
Again, the NEXYS 2 isn't officially supported, so if it doesn't work like the Spartan 3E starter kit board, then you won't be able to use LabVIEW FPGA with it.
Good luck!
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

Errors in the "Getting Started with the FPGA Module" examples

We have LabView 8.0, the NI-5640R, and the LabView FPGA module installed on a computer with the IF-RIO board, and we are trying to compile the provided NI examples (NI-5640R documentation), but we receive errors that say "sub VI is not executable" and "you have connected terminals of two different types" Why are the existing NI VI's not compiling properly? We are guessing that we have some configuration error, though we aren't sure.

The run error is broken and gives the option to list and locate errors, though these errors are found everywhere in the files that are provided in the NI-5640R. Several wires have red x's that say that different types are attempting to be wired, and multiple blocks are highlighted that list errors that say that the blocks cannot be activated. It seems like there is a problem with how the software and board has been installed. The group that used the board before us had a functioning project, although they but the IF-RIO in their own computers, so they might not have put everything back together properly. Their old VI's produce the same errors on our computer. Do you have any suggestions on what to do?

Simple SLB with the ACE Module

Similar Messages

Maybe you are looking for