Single Channel Excel Export

I want to write a VBScript that will export only selected channels to an Excel file, similar to what is done manually with the Excel Export Wizard. Is there a function (possibly using the EXCELExpChn variable) that will allow me to do this? I can not use a saved configuration file, because the total number of data channels and the channels to be exported will be variable.

Please have a look at the following forum entry which explains how to select channels to export them :
http://forums.ni.com/ni/board/message?board.id=60&message.id=4997
Please ask if you have further questions.
Andreas

Similar Messages

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

Excel Exports

1) Does anyone have a solution for creating an Excel Export with a chart / graph included?
2) Is there any way to include formatting in an Excel Export? I'd like to be able to include Borders, Font Coloring, Formula's etc.

Vega,
What version of ApEx are you running? I know in 2.x you could not export graphs "directly" into excel. However, although I've never done it, I've read documentation from companies that opted to use ApEx over Java and ASP solutions... One practice was to leverage the use of individuals familiar with VBA to format reports exported from ApEx. Have any of those around? ;)
Dan
Sorry, meant to say VBA (Visual Basic for Applications)
Message was edited by:
dmcghan

Excel export are merging cells for data on multiple lines !

Hello,
I'm using Crystal Report XI R2, when we are doing an export to Excel with have an unexpected formatting.
For example the value of the name is on 2 lines:
=> So, on Excel the result is on 2 lines but merged. We want to have this result only on one cells.
Remark: if we delete the 2nd lines, because cells are merged we obtain the expected result.
Proposal A:
Are they any set-up available concerning the formatting of Excel ?
Proposal B:
Could we run some VBA when we click on Export button to make queries on the Excel ?

When they introduced Unicode support in Crystal 9 (I believe), they had to completely re-write the export routines. At that time, they made a decision to change the functionality of the excel export. Crystal is attempting to remain absolutely faithful to the graphical layout of the report as you see it in the viewer. So it creates merged cell sections, empty columns between columns, and empty rows to give you as close to exactly what you see in the viewer as possible. Unfortunately, the result is typically less than useful. Iu2019ve had several conversations with Business Objects (now SAP) with regards to this when they changed it between versions 8.5 and 10, and they have no intention of changing the functionality as it now exists.
There is a document which is now likely somewhere on the SAP portal that explains what you need to do to obtain the best results when exporting to excel.
The jist of it is this:
Line up all of the columns detail data with thier headers, and make sure that data fields are the same size as thier headers.
Line up all rows (headers and detail rows). (ie: select everything in the row, right click, align tops, and make the same height)
cram everything as close together as possible. zero space in the report translates to zero extra collumns and rows in the export.
the other option is to use the export to data only functionality, but that may not be what you're looking for either.

How to do a single channel DAQ using NI-DAQ driver software with a PCI-MIO-16XE-10 card

Hi,
I would like to find out how I could do a simple one channel Data Acquisition from a signal generator using the NI-DAQ driver software with a PCI-MIO-16XE-10 card.
I have written some test problem but even when the signal generator is turned on/off I get back some weird values.
Here is my code.
CString sFunctionName("");
double volt[OUTPUT_POINTS*2];
double out[OUTPUT_POINTS*2];
short timebase, ready, code, stopped;
unsigned short sampleInterval;
int i, status, count=0;
unsigned long update, points;
short* ai_buffer;
short output_ch_vector[16];
int local_ITERATIONS = 2;
SAFEARRAYBOUND bound[1];
double dataItem = 9.9;
long j;
long k;
double* pTheValues;
LPTSTR lpsz_ErrMsg;
// Initialise device
status = Init_DA_Brds (deviceNumber, deviceNumberCode)
Initializes the hardware and software states of a National Instruments
DAQ device to its default state and returns a numeric device code that
corresponds to the type of device initialized
Init_DA_Brds(DEVICE, &code);
// Check return code from Init_DA_Brds
Code return should be 204: PCI-MIO-16XE-10.
if (code < 0)
CString sError;
sError.Format("Code error: %d", code);
if (code == -1)
sError = sError + ": No device found";
LPTSTR lpsz = new TCHAR[sError.GetLength()+1];
_tcscpy(lpsz, sError);
AfxMessageBox(lpsz);
delete lpsz;
return S_FALSE;
// Allocate memory for analog output and input arrays
//ao_buffer = new short[OUTPUT_POINTS*2];
ai_buffer = new short[OUTPUT_POINTS];
// Set double-buffering
status = DAQ_DB_Config (deviceNumber, DBmode)
Enables or disables double-buffered DAQ operations.
status = DAQ_DB_Config(DEVICE, 1);
if (status < 0 )
sFunctionName = "DAQ_DB_Config";
goto TidyUp;
// Get the rate parameters
status = DAQ_Rate (rate, units, timebase, sampleInterval)
Converts a DAQ rate into the timebase and sample-interval
values needed to produce the rate you want.
status = DAQ_Rate(RATE, 0, &timebase, &sampleInterval);
if (status < 0 )
sFunctionName = "DAQ_Rate";
goto TidyUp;
// Setup scan
status = SCAN_Setup (deviceNumber, numChans, chanVector, gainVector)
Initializes circuitry for a scanned data acquisition operation.
Initialization includes storing a table of the channel sequence
and gain setting for each channel to be digitized
status = SCAN_Setup(DEVICE, 1, ai_channels, gain);
if (status < 0 )
sFunctionName = "SCAN_Setup";
goto TidyUp;
status = SCAN_Start (deviceNumber, buffer, count, sampTimebase,
sampInterval, scanTimebase, scanInterval)
Initiates a multiple-channel scanned data acquisition operation,
with or without interval scanning, and stores its input in an array
status = SCAN_Start(DEVICE, ai_buffer, OUTPUT_POINTS, timebase, sampleInterval, timebase, 1000);
if (status < 0 )
sFunctionName = "SCAN_Start";
goto TidyUp;
while(count < local_ITERATIONS)
// Check whether we are ready to input another half-buffer
status = DAQ_DB_HalfReady(DEVICE, &ready, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_HalfReady";
goto TidyUp;
if (ready == 1)
status = DAQ_DB_Transfer(DEVICE, ai_buffer, &points, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_Transfer";
goto TidyUp;
count++;
// Clear the analog input
status = DAQ_Clear (deviceNumber)
Cancels the current DAQ operation
(both single-channel and multiple-channel scanned) and reinitializes the DAQ circuitry.
status = DAQ_Clear(DEVICE);
if (status < 0 )
sFunctionName = "DAQ_Clear";
goto TidyUp;
status = SCAN_Demux (buffer, count, numChans, numMuxBrds)
Rearranges, or demultiplexes, data acquired by a SCAN operation
into row-major order, that is, each row of the array holding the
data corresponds to a scanned channel
status = SCAN_Demux(ai_buffer, OUTPUT_POINTS * 2, 2, 0);
if (status < 0 )
sFunctionName = "SCAN_Demux";
goto TidyUp;
//Convert binary values to voltages (Doesn't actually take a reading from board)
status = DAQ_VScale (deviceNumber, chan, gain, gainAdjust, offset, count, binArray, voltArray)
Converts the values of an array of acquired binary data and the gain setting for that data
to actual input voltages measured.
status = DAQ_VScale (1, 0, 1, 1.0, 0.0, OUTPUT_POINTS , ai_buffer, volt);
if (status < 0 )
sFunctionName = "DAQ_VScale";
goto TidyUp;

Hello,
Please take a look at lots of examples available at :
1. www.ni.com >> NI Developer Zone >> Development Library >> Measurement Hardware
2. C:\program files\national instruments\ni-daq\examples\visualc
Sincerely,
Sastry V.
Applications Engineer
National Instruments

Currently Unavailable Message for a Single Channel

Has anyone had this issue with a single channel? The new FSC HD (584) that just came out last week worked for 1/2 a day then it started showing Currently Unavailable. I had a technician out a few days later and he checked signal strength, changed all the connections at the splitter on every line and the channel started to show up again. Two days later it went back to Currently Unavailable.   After 2 hours on the phone, an hour tech visit, an hour on online chat, researching all I could, etc. they have no clue what to do and now I have to wait for a technician to come out again in 7 days!!!!!   Gotta love Verizon!
I can't believe that there is no record of another customer having this issue in their tech support databases and someone can tell me something other than unplug the connection and plug it back in.
Solved!
Go to Solution.

The technician changed out all of the connections into and out of the splitter. We also reconnected everything along with way (at the router, to the TVs and from the wall plates, etc.).   It worked fine for a day or two then went out again on all of the TVs. Then this morning the channel is appearing again (without doing anything), but it's just a matter of time until it goes out again.   My question is I could understand a connection issue if it were all of the HD channels, but why on just this one (the newest one released about a week ago, doesn't happen on the previously released HD channel BET).

Adding a single channel to my service?

I am hoping to get an answer from someone in Verizon. Can I add a single channel to my current lineup. I just switched from Comcast and realize now that I don't get the NHL network. I don't really want the entire sports package for $15. Can you add single channels? Thanks

chrisaster wrote:
I am hoping to get an answer from someone in Verizon. Can I add a single channel to my current lineup. I just switched from Comcast and realize now that I don't get the NHL network. I don't really want the entire sports package for $15. Can you add single channels? Thanks
Answer is no, you have to either upgrade to a higher tier or subscribe to the sports package. You're basically asking for ala carte channels (as walt said), while that is most of us would want, it just is not available.

How to freeze the columns in excel exported from SSRS report??

We have created a report for our client. The client wants the report in excel format. As there are nearly about 30,000 rows in the excel. Client wants us to freeze the column header names in the excel so that even after scrolling down they
will be able to see the column names.
can anybody have idea how to achieve this in SSRS?

Hi Shard,
Thanks for your post, You can achive your requiremets by using the below logic. hope this will help you.
Steps to achieve it
1. Select the tabix and click on Tablix properties.
2. In the General tab under Column Headers section you can see "Keep header visible while scrolling" checkbox, check it.
3. Now the header row will be remain fixed in the report.
OR
1. In the grouping pane, make sure to turn on advanced mode (click on the small black down arrow on the far right of the grouping pane)
2. Select the corresponding (Static) item in the row group hierarchy
3. In the properties grid, set RepeatOnNewPage to true
4. KeepwithGroup to After
OR
1)Freeze the header of all columns[ Freezing table header ] : To do select static member of table header row from row groups [ Advanced Mode ] and set FixedData to true
2) Freeze the initial 2 columns : To do select static member of columns in column group and set fixedData to true .
How do you freeze the tablix header row in an Excel export file in SSRS 2008
Suhas Kudekar
Mark as Answer if this resolves your problem or "Vote as Helpful" if you find it helpful.
My Blog
Follow @SuhasKudekar

Add columns to EXCEL exported from ALV

Hi,
I'm using the function module REUSE_ALV_GRID_DISPLAY, to display an ALV report. This report shows a standard text when users click on one column.
I wanna know if its possible to add the standard text as a column into the EXCEL exported from this ALV? and if so, how can I do it?
Regards.
Gregory.

Thanks again Raymond,
With internal tables that have a type from ABAP dictionary works fine. My problem is that my internal table is declared into my program's global variables. My code bellow:
DATA: BEGIN OF it_excel OCCURS 0,
         department TYPE adcp-department,
         bname       TYPE usr02-bname,
         name_text   TYPE adrp-name_text,
         agr_name    TYPE agr_users-agr_name,
         text        TYPE agr_texts-text,
         from_dat    TYPE agr_users-from_dat,
         to_dat      TYPE agr_users-to_dat,
         tcode       TYPE agr_tcodes-tcode,
         ttext       TYPE tstct-ttext,
         tdesc       TYPE string,
      END OF it_excel.
* fills the it_excel table
perform fill_excel_data.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
      window_title         = 'File location'
      file_filter          = cl_gui_frontend_services=>filetype_excel
      prompt_on_overwrite = 'X'
    CHANGING
      filename             = v_file
      path                 = v_path
      fullpath             = v_fpath
      user_action          = v_useraction
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
CHECK sy-subrc EQ 0 AND v_useraction EQ 0.
CREATE OBJECT v_excel 'EXCEL.APPLICATION'.
SET PROPERTY OF v_excel 'VISIBLE' = 0.
CALL METHOD OF v_excel 'WORKBOOKS' = v_workbooks.
CALL METHOD OF v_workbooks 'ADD'.
SET PROPERTY OF v_excel 'SHEETSINNEWWORKBOOK' = 1.
CALL METHOD OF v_excel 'Worksheets' = v_sheet
    EXPORTING #1 = 1.
CALL METHOD OF v_sheet 'Activate'.
CLEAR v_subrc.
CALL METHOD cl_gui_frontend_services=>clipboard_export
    IMPORTING
      data                 = it_excel[]
    CHANGING
      rc                   = v_subrc
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
CHECK v_subrc EQ 0.
GET PROPERTY OF v_excel 'ACTIVESHEET' = v_sheet.
CALL METHOD OF v_sheet 'PASTE' NO FLUSH.
CALL METHOD OF v_sheet 'SAVEAS'
    EXPORTING #1 = v_fpath #2 = 1.
When calling cl_gui_frontend_services=>clipboard_export method the variable v_subrc is equal to 0 and sy-subrc is equal to 1 and the EXCEL file is not saved.
Can you please tell me, what am I doing wrong?
Regards,
Gregory
Edited by: Gregory Mayorga on Sep 7, 2010 10:56 AM

Excel export defaults to ".txt"

Hi Forum,
I have a question regarding the "Excel" export button on SAP B1.
Whrn i try to export data clicking the excel button, the window "Save As" defaults to ".txt" extension.... is there a place to change the default to make it ".xls" instead???
Regards,
Manuel Roman

Hi Gordon,
I had B1 on a pc that anytime that i clicked on the excel button and save it, the document would open in excel right away.
Now i have a laptop with XP Pro (same configuration as the pc) and everytime i click on save, saves the document and it doesn't open right away.... i have to basically import the txt file into excel....
The funny thing is that it was opening the file in excel and it was formatted correctly.
Any Ideas?
Regards,
Manuel Roman

Excel export (webui crm -- excel) wrong format of house number

Hi,
in an excel export (webui crm ---> Excel) is displaying the wrong format.
If the house number contains a special character such as "/" then the house number displayed in the date format in Excel.
And if in the field house number is a number and a letter such as "9 a", then the house number is displayed in time format (9:00 am) instead the house number.
Does anybody know, how can I solve this problem?
Thank you in adance.
Best regards, Jasmin

Hi,
There is no error from the CRM functionality. If you SAVE the excel,instead of opening it directly and then " open with "
word pad or notepad, you can see the phone no.s and fax no.s are properly transported to excel.There is a default format setting of
excel from the Microsoft, so you are getting the default format after opening the excel.
Steps:
1.Export to excel.
2.Choose the BP,PHONE and FAX columns holding the 'CTRL'key.
3.Right click on the chosen columns and choose "format cells".
4.Under the tab "number" choose 'number' and and reduce the decimal
place to '0' and click "OK".
5.Now you will be able to see the expected format.
If you are using IE then the excel file that is being generated should be an XML file which would help with the formating issue. But when there is a problem in the generation of the XML file a CSV file is created instead.
The kind of problems that can cause this could be :
- Wrong version of Excel (professional needed)
- Error in encoding (note 1560243 corrects this)
- Active X Settings on browser are not properly setup or disabled
- Other problems (some fixed in note 1457261)
I hope this helps.
Br,
Lloyd

Excel Export warning:verify file is not corrupted or is from a trusted sour

Hi, everyone,
I'm using Apex 3.1 under CentOS 5 with 11G and Oracle HTTP server, also with Oracle BI publisher 10.1.3.3.2 under Windows server 2003.
The Oracle BI installation got all the default settings. Print under Apex is working, with PDF, EXCEL, RTF except Excel export with a minor but annoying warning
message like: "
The file you are trying to Open, 'Top100-customer.xls' is in a different format than specified by the file extension, Verify the file is not corrupted or is from a trusted source before opening this file. Do you want to open this file now? "
then if I choose YES(default is NO), everything OKs. I get the same message even I save the file locally then open it. This is annoying to our users because they get such warning everytime they try export Apex to Excel file. Did I miss something in Oracle BIP setting Or did I miss something in Apex setting? the data and export are working, just with this extra unwanted warning.
Any suggestions are greatly appreciated.
sean

Thanks, John,
Your answer is exactly right, it's EXCEL 2007 thing, not Apex or BIP thing.
We have no control on user's registry settings, so from today on I just tell our customers "it's MS's fault" :)
Thanks.
sean
Hello,
This MS KB seems to fit your situation -
http://support.microsoft.com/kb/948615
John.
http://jes.blogs.shellprompt.net
http://apex-evangelists.com

Excel-Export WAD 7.0 - Header/Footer/Margins

Dear all,
I used the Header/Footer and Margin options in the export wizard (export to excel) but it doesn't work. When I print the excel file no header/footer information are shown. as well as the margin settings of the printed page are not as I entered.
I know that I should use the pdf-export (it works fine), nevertheless the customer wants to have a "formatted printing" even out of a generated excel-file.
Any ideas?
Or do the input options regarding header/footer and so on only refer to the pdf-export?
Thanks in advance.
Mark

Dear Mark,
Unfortunately Excel exporting is not designed for such purposes. The only option you have is to specify which web items are to be exported (using the Export to Excel button with the standard command). In case you want to export from the context menu, it will send to Excel everything which is on the screen, so, no way to control.
You could consider a workbook for a better formatted Excel, if really needed.
Kind Regards,
Marcio

How to improve the efficiency of EXCEL export?

I've found a not too small issue of the built-in EXCEL export function. We have a page which let the users query a huge table and return a report page. The query takes long time, however the users are tolerable enough to stand that since they know the size of the table. Nonetheless, the process to export to EXCEL would take almost the same time (maybe a little bit shorter) as the query, which is in-tolerable. It seems that the built-in function just Re-run the query against the table and sends the file to the excel file. Is there any way to solve this issue?
Thanks in advance.
Have a nice weekend!

That is a good idea.
You can dump your query output into the collection and base the report region off of that collection. The Excel output just re-runs the region query so if you base the report region on the collection, you are done (you don't need to manually do just the export)

How do you freeze the tablix header row in an Excel export file in SSRS 2008?

So this is totally killing me.
I've found out how to make a tablix header row repeat on each page of a PDF export file in SSRS 2008 (which I won't even get started on because all I can say is that 2005 is way better), but I cannot figure out how to make a simple header row of a tablix
freeze in an Excel export file. The tablix is right at the top of the body and spans the entire width of the design area. How in the world do you get it to freeze in the Excel export file?

Rashiki777,
From your information, I get that you want to freeze the tablix header when view the report in Excel. Please follows
these steps:
Click
the header row
Click
View menu on top of the toolbar, then you will Freeze Panes
Select one kind of Freeze based on your requirement.
This link supplies the detailed steps
http://inpics.net/tutorials/excel2007/vis5.html If you have any concern, please feel free to ask.
Of course,
you could utilize the list control to display a certain rows on one sheet, then every sheet in Excel will have one header, the steps are following:
Drag a list into report body, right-click
Details in Row Groups panel to select Group Properties….
Click
Add button, then type in expression =ceiling(RowNumber(nothing)/25)
in the textbox Note: 25 is just 25 rows per page, you could reset this value based on your requirement.
Drag the table control into this list control.
If you want to display every page in every sheet, you could add a page break to the table control in the list.
Best regards,
Challen Fu

Single Channel Excel Export

Similar Messages

Maybe you are looking for