Single contract details report in Reporting services taking approx 40 secon

Component name: Single contract details report
Application: online application
Problem: Single contract details report in  Reporting services taking approx.40 seconds to show the report
Report is look like below screen shot :
The report is designed in order to show as much information as possible for an agreement. In order to present the information in a clearly arranged manner the data is clustered and displayed on separate report tabs. The data clustering is as follows:
u2022     Header Information
u2022     Overall Contract Details
u2022     Vehicle Details
u2022     Driver Details
u2022     Mileage Details
u2022     Maintenance/Services Details
u2022     Tyres Details
u2022     Fuel/Oil Details
u2022     Invoices Details
u2022     Contract History
Single Contract Details report is a very huge report it is split into tabs. Navigation between these tabs is possible with a menu bar at the top of the report. Each tab has its own name and located there as a link. By clicking on it the tab is shown.
This report is a special type of report name as drill down report. Due to the Crystal limitation that a report can only contain one sub report, AOL used java component to call single contract report
Figure: Drill down Report
This is the only report of this type in AOL which is using the drill down functionality in crystal and now we are investigating the performance issue for this report, we have checked all possible area (java, crystal report) where we can improve the performance for this report.
We thought if we can replace the java component with crystal and directly crystal report will connect to single contract report using hyperlink, it may increase the performance but due to the Crystal limitation that a report can only contain one sub report we are not able to do this approach.

HI Piroz,
Im actually looking for the same thing...
How can I create a report were I can see if a contract has been changed or cancelled? I use VA45 to see contracts, I would like to run a report to see if there has been any changes on the contracts of if they have been cancelled, thank you soooooo much if you can help me

Similar Messages

  • Report Multiple Unique Services in a single report

    Report Multiple Unique Services in a single report
    Using Advanced reporting is there a way to report on 3 unique service requests into one report by using a common field, in our case it is an application identifier that is common in all the request types? 

    Peter,
    Thank you for your answer, but I'm not sure I understand or I may not have made my issue clear.    The dictionary with the fields is reportable and the services are reportable as well in Service Designer.   I go into Ad-Hoc reporting and access the dictionary and insert the field to my report, I then pull the first service in - everything looks good, I go to my next service (both services use the dictionary with the application identifier) and try to pull in the data from there and the repor

  • SQL 2012 R2 - SSRS with the Report Server Web Service URL, can't access

    Hello:
    I am installing Dynamics CRM 2013.  When I am on RS Configuration manager; I am running into the SSRS (SQL 2012 on Server 2012)SQL issue, can't access the
    http://servername/:80/ReportsServer or
    http://servername/:Reports web pages
    The database server has SSRS native mode installed, it is using a domain account for the service credentials.  This account also has permission to log on a service in the GPO
    Account is a domain admin and is a local administrator
    SQL server is 2012 R2 on Windows Server 2012.  User base is less than 60 people and they have SharePoint 13 on the same SQL server.  Server more than enough resources.
    Any assistance would be appreciated.
    Thanks..Dan

    Hi DCas1,
    According to your description, you could not access
    http://servername/:80/ReportsServer or http://servername/:Reports web pages from Reporting Services configuration manager, SSRS in configured in native mode and the account you used is a local administrator.
    In Reporting Services, URLs are used to access the Report Server Web service and Report Manager. Before we can use either application, we need to configure at least one URL each for the Web service and Report Manager. If we are using the Reporting Services
    Configuration tool to create or modify the URLs, we can accept the default values for a URL or specify custom values. When we create a report server URL, we must specify the following parts: Host name, port and Virtual directory. In order to improve the efficiency
    of troubleshooting, I need to ask several questions:
    Since the default URL is http://<computername>/reportserver, did you type the URLs manually? or the URLs configured in Reporting Services configuration manager are
    http://servername/:80/ReportServer and
    http://servername/:Reports?
    Could you provide detailed information of error log(default location: %programfiles%\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles)?
    For more information about Configuring a URL, please refer to the following documents:
    http://msdn.microsoft.com/en-us/library/ms159261(v=sql.110).aspx
    http://msdn.microsoft.com/en-us/library/bb630447(v=sql.110).aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu

  • Report name for services where used in task lists

    plz let me know report name for services  where used in task lists.

    Hello Sairam,
    I am abit confused. Are you looking for report to find where the task list is used ? You can find all the available reports in The menu path Logistics -> Production -> Master Data -> Routings -> Reporting.
    If you want a specific one then please provide more details
    Thanks
    Amber

  • Service contract details

    Hi Guys
    We have a requirement
    We need to develop a report and its output will be  Service contract number and its short text ,vendor and OA vendor and address of both VN and OA
    Input fields are service master or service master short description
    Service contracts are already created with service masters in the system
    Please help with tables with which we need to deal ,where we can find service contract and service number link in which table
    Please help
    SAP MM

    thank you for your answer
    I need table relation between service contracts and service master number
    Thanks in advance

  • Can we create a report painter report which shows the details of CC/CE/IO?

    Hi,
    I am trying to create a report painter report which shows the details of cost elements,cost centers and internal orders in a single section.I am able to create reports with 2 characteristics (like CC/CE or IO/CE etc.) but not with 3 characteristics (CE/CC/IO)  which is my case.I am trying to get data something like below.Is this even possible using report painter?I will appreciate if any one could suggest how to do this.
    CE          CC                        IO                        Amt
    600000  8190001100           1100001                $1000
                                              1100002                $2000
                                              1100003                $3000
                                                                          $4000
    620001  8190001101           1100004                $6000
                                              1200001                $2500
    . . . . . . . .and so on
    Thanks,
    Saurabh.

    >
    But when i am using the same synonym in crystal report design, my report is working fine.. but the same synonym is available as invalid in database..
    >
    What does 'my report is working fine' mean? Are you saying that if you rerun the query it retrieves fresh data from the database?
    What does 'same synonym is available as invalide in database' mean? How are you determining this.
    Synonyms can be created for objects that do not yet exist.
    create synonym q for table_does_not_exist
    select * from user_objects where object_name = 'Q'
    SYNONYM_NAME,TABLE_OWNER,TABLE_NAME,DB_LINK
    Q,SCOTT,TABLE_DOES_NOT_EXIST,

  • You are running a report. It is taking long time for

    You are running a report. It is taking long time for
    execution. What steps will you do to reduce the
    execution time.
        plx explain clearly

    Avoid loops inside loops.
    Avoid select inside loops.
    Select only the data that is required instead of using select *
    Select the field in the sequence as they are present in the database, and also specify the fields in the where clause in the same sequence.
    When ur using for all entries in the select statement, check whether the internal table to which ur refering is not initial.
    Remove select... endselect instead use into table
    Avoid Select Single inside the loop, instead select all the data before the loop and read that internal table inside the loop using binary search.
    Sort the Internal tables where ever necessary.

  • With reference to contract Purchase Order Analysis report.

    Hi,
    I need SAP Standard " With reference to contract Purchase Order Analysis report"
    Regards,
    Priya.

    Hi,
    there is no standard report to get the PO list wrf to contracts,
    but you can get through SE16 from the table EKPO, where you have to pass the contract numbers ( get through ME3L,ME3M or ME3C ) in the field KONNR,
    lakshmi reddy

  • Issue in displaying header details in ALV report

    Hi,
    I have used slis_t_listheader and REUSE_ALV_COMMENTARY_WRITE to display the header details in ALV report.I want the details to be displayed as below.
    Requester : ----------------------                                                                               Page: 1
    Program: -----------------------                                                                                Date:---------
                                                                     Title of Report
    But when I use the structure slis_t_listheader to display the header details,all the fields are coming one below the other.
    How can I get the fields as shown in the above format
    Edited by: Abaper12345 on Jun 25, 2009 7:54 AM

    Hi,
    Go through following code... its showing the data exactly the way you want....
    REPORT  TEST3.
    TYPE-POOLS:slis.
    TABLES:MARA.
    *Type Declaration
    TYPES:BEGIN OF t_mara,
          matnr TYPE mara-matnr,
          ersda TYPE mara-ersda,
          ernam TYPE mara-ernam,
          END OF t_mara.
    *Internal Table
    data:it_mara type standard table of t_mara.
    *Work Area
    data:wa_mara type t_mara.
    DATA:i_repid TYPE sy-repid .
    i_repid = sy-repid.
    *Declaration for field catalog
    DATA : fcat TYPE slis_t_fieldcat_alv,
           wa_fcat TYPE slis_fieldcat_alv.
    *Declaration for Layout
    data : WA_LAYOUT type SLIS_LAYOUT_ALV.
    *Initializing ColumnWidth_Optimize For Layout
      WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
    START-OF-SELECTION
    START-OF-SELECTION.
    *Fetching data into internal tables
      PERFORM get_data.
    *Buil Fieldcatalog
      PERFORM build_fcat.
    *Display ALV Report
      PERFORM alv_display.
    *Build Fieldcat
    FORM build_fcat .
      wa_fcat-tabname = 'IT_MARA'.
      wa_fcat-fieldname = 'MATNR'.
      wa_fcat-inttype = 'C'.
      wa_fcat-seltext_m = 'Material Number'.
      wa_fcat-outputlen = 25.
      wa_fcat-col_pos = 1.
      APPEND wa_fcat TO fcat.
      CLEAR wa_fcat.
      wa_fcat-tabname = 'IT_MARA'.
      wa_fcat-fieldname = 'ERSDA'.
      wa_fcat-inttype = 'C'.
      wa_fcat-seltext_m = 'Date'.
      wa_fcat-outputlen = 25.
      wa_fcat-col_pos = 1.
      APPEND wa_fcat TO fcat.
      CLEAR wa_fcat.
      wa_fcat-tabname = 'IT_MARA'.
      wa_fcat-fieldname = 'ERNAM'.
      wa_fcat-inttype = 'C'.
      wa_fcat-seltext_m = 'User'.
      wa_fcat-outputlen = 25.
      wa_fcat-col_pos = 1.
      APPEND wa_fcat TO fcat.
      CLEAR wa_fcat.
      endform.
    *&      Form  GET_DATA
          text
    -->  p1        text
    <--  p2        text
    form GET_DATA .
    select matnr ersda ernam from mara into table it_mara.
    endform.                    " GET_DATA
    *&      Form  ALV_DISPLAY
          text
    -->  p1        text
    <--  p2        text
    form ALV_DISPLAY .
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
       I_CALLBACK_PROGRAM                = i_repid
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            = ' '
       I_CALLBACK_HTML_TOP_OF_PAGE       = 'HTML_TOP_OF_PAGE'
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         =
       IT_FIELDCAT                       = fcat
      TABLES
        t_outtab                          = it_mara
    EXCEPTIONS
       PROGRAM_ERROR                     = 1
       OTHERS                            = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endform.                    " ALV_DISPLAY
    *&      Form  html_top_of_page " I_CALLBACK_HTML_TOP_OF_PAGE  "
    FORM html_top_of_page USING document TYPE REF TO cl_dd_document.
    CALL METHOD document->add_text
      EXPORTING
        text          = 'Program'
        sap_color     = document->list_group
        sap_fontstyle = document->standard
       sap_emphasis  = document->strong.
    CALL METHOD document->new_line
      EXPORTING
        repeat = 1
    CALL METHOD document->add_text
      EXPORTING
        text          = 'Requester'
        sap_color     = document->list_group
        sap_fontstyle = document->standard
       sap_emphasis  = document->strong.
    CALL METHOD document->new_line
      EXPORTING
        repeat = 1
    CALL METHOD document->add_gap
      EXPORTING
         width      = 125
    CALL METHOD document->add_text
      EXPORTING
        text          = 'This Is Test Data'
        sap_color     = document->list_group
       sap_fontsize  = document->LARGE
       sap_fontstyle = document->standard
       sap_emphasis  = document->strong.
    ENDFORM.                    "HTML_TOP_OF_PAGE
    Thanks & Regards
    Ashu SIngh

  • 4 PDF reports from Single report in reports 10G

    Hi All,
    i want to generate 4 PDF report from one oracle report in reports 10G.
    from the same query i want to generate 4 PDF with different order and result set based upon the query parameter at a single time.
    exp: query fetch Some eng/spanish provider and client data. requirement is i want to spilt into 4 PDF:
    Provider wise Eng.
    Provider wise spanish.
    Client wise english.
    Client wise spanish.
    Can anybody please help on this?
    Regards
    Abhishek

    Hi All,
    i am generating 4 PDF reports from one Oracle reports in 10 G.
    i used RUN_REPORT_OBJECT built in 4 times with some different parameter list at a single time.
    some time it generates but some time it generate 2 or 3 out of 4.
    Can you anyone help me on this issue.
    Regards,
    Abhishek
    Edited by: user651239 on Sep 22, 2008 10:16 PM

  • Can we insert new Detail Section After Report Footer in Crystal Report

    Hi All,
                Is it possible to  insert new  'detail' section  after  ' Report Footer' in the Crystal Report, i know this  is possible in 'detail' section where you can insert new detail one after another, but i want to  insert another  ' detail' section after Report Footer according  my required  result.
    Regards
    Rahul

    Hi Rahul...........
    Open Crystal Report and go to Insert option and select SubReport. From here you can create Subreport........
    Check below links....
    http://msdn.microsoft.com/en-us/library/ms227520%28v=vs.80%29.aspx
    http://www.youtube.com/watch?v=JVNkhj_rnMY
    Regards,
    Rahul

  • Report on running services/processes?

    is it possible to create a report on running services, we are just starting to look at the reporting possiblities but we have a need to target and remove a certain service. The novell ZAM7 did not uninstall itself on a bunch of our windows 2000 machines when ZCM was deployed and now that the old ZEn server is gone we suspect slowness on booting those pc's due to the ZAM. So if we could report on the cclient.exe service running on certain machines that would help us track them down and remove the ZAM.

    Originally Posted by rvhskent
    is it possible to create a report on running services, we are just starting to look at the reporting possiblities but we have a need to target and remove a certain service. The novell ZAM7 did not uninstall itself on a bunch of our windows 2000 machines when ZCM was deployed and now that the old ZEn server is gone we suspect slowness on booting those pc's due to the ZAM. So if we could report on the cclient.exe service running on certain machines that would help us track them down and remove the ZAM.
    I foudn a round about way to get the information i wanted via a canned report, Zen hasa canned report that ideintifies asset inventory software and because i was looking for zam 7 it reported all instances of it, so now i can go ahead and clean off the machines that for whatever reason still have it.

  • Prompting for UserName and Password when I click Report Server Web Service URLs in ssrs 2008 R2

    Hi All,
                 I am using SQL Server Reporting services 2008 R2 . When I tried to open report server webservice URL in SSRS 2008 R2 It is prompting username and password. I tried to resolve the issue by deleting the <!--
    <RSWindowsNegotiate/> --> line in rsreportserver.config but still I am getting the same prompt
    and i tried by putting the server URL in trusted sites in IE also still no luck. I referred the below link 'http://blogs.msdn.com/b/lukaszp/archive/2008/03/26/solving-the-reporting-services-login-issue-in-the-february-ctp-of-sql-server-2008.aspx'
    I am getting the same error.
    Can anyone help me out to resolve this issue easily.
    Thanks
    Dathy

    Hi Dathy,
    Generally, this is a very common issue in Reporting Services 2008 R2, the blog you post is a good blog that summary the common solutions. If it doesn’t help, could you please try the following:
    Open Internet Explorer, go to Tools and click on Internet Options.
    Under the Security tab, click on Trusted sites and click the Sites button and Add Report Manager/Report Server URL to the trusted sites.
    Then click Custom Level, and check the option Automatic logon with current user name and password.
    Repeat step 3 and step 4 for Local Intranet.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Transport Webi Reports and Web services as the backend of dashboards from BO Production to BO Development system

    Hello Experts,
    I am working on SAP BO 4.1. I have made several dashboards on top of web services ie;Web Service Method. I have 2 systems in BO ie; Development and Production Systems.The BW production system is connected to BO Development and Production both.
    The Webi reports are made on top of BI BEx Query. From the webi reports, BI Web Services are made on top of which the dashboards are made further.
    The Webi Reports, Web Services and the Dashboards everything is made directly in BO Production.
    My question is, Can I transport the Webi Reports and the Web Services from BO Production to BO Development?
    And If yes, will it have any other impact on webi reports, web services or dashboards?
    Thanks & Regards,
    Alfred Thomas

    Hi Gill,
    As per your reply,with the promotion managament i have make the web services again manually in Dev system...Right?
    Is there any way possible that i can transport the webservices and the webi reports usind Query AS A Web Service Designer. And if yes, through this QAAWS will the WSDL or the URL required for the web services in the connection button in dashboards will automatically updated or changed as per the Development System?
    But i am not able to enable the "Deploy to Other servers Option" in QAAWS.
    Can you please help?
    Regards,
    Alfred thomas

  • Adding the Document Total to Detailed Liabilities Aging Report

    Hi,
    On the Detailed Liabilities Aging Report(Vendor Aging), I would like to add the Document Total from AP Invoice. How can I link to the AP invoice table(OPCH).
    Thanks
    Krishnan

    Hi Krishnan,
    This PLD is hard coded report.  You don't have any options to link to other fields in the report.  If you need that info on the report, you need to create your own.
    Thanks,
    Gordon

Maybe you are looking for

  • How can I fix my iPod if it won't load any app?

    My iPod won't load any apps and if it does I will get kicked out of the app within 20 seconds. I've read that I should just try restarting it by holding the home and power button until it shuts off, but my power button is stuck. The other thing I've

  • Wifi login via browser

    Hi, I'm using a wifi where I have to login with my personal account. So I always have to wait for the login screen to come up. If I accidentally click away the login screen or for whatever else reason (which happens often), I have to want until the s

  • Problem starting a workflow with a timed event.

    Hi all, I am trying to start a workflow with a timed event this way, Start Date Expression: StringToDate("20:09", "HH:mm") Reschedule: 1 day I save the workflow at 20:07, but nothing happens at 20:09. Any hints? Thanks in advance.

  • Need help on -- Pre printed stationary. oracle report

    Hi , We have developed new oracle report which prints AR invoices... This is displaying properly from apps.. but when sent to printer .. the first page is printing properly .. from second page onwards .. it is leaving one blank line... 1 page -- ok..

  • Audigy 2 zs keeps removing audio driver leaving me with no so

    I have had Audigy 2zs for 4 months trouble free then one day I had no sound. I found it had removed my original audio driver.After several destructi've recoveries it removes the driver within or 2 restarts leaving me with no sound and no audio driver