Sketchbook Pro won't color in scanned images?

Sketchbook Pro won't color in scanned images, even though it said it could. I'm making an animated movie, and this is a huge obstacle. We've tried calling autodesk, but they just won't give us a clear cut answer. If any one knows any info on it, it would help a lot

well, most of my scanned images are imported as JPG's, and exported as .tiffs, and they're put in final cut express. The problem is that when I put it in sketchbook pro, and make a layer beneath to color, it doesn't color it...
Thank you for your help

Similar Messages

G4050 color of scanned images is wrong

Hello,
I am using the Scanjet G4050. The color of the images I scan in are terribly off. I'm not talking about negatives or slides... I haven't begun to tackle those issues yet. The cartoon images I draw and scan in are way wrong. Is there a patch or recalibration? Thank you

This can be caused by a problem with the color profile for your display monitor or color profiles embedded in images.
You can disable color management to test if the problem is the color profile on the computer. 
You can set the pref gfx.color_management.mode to 0 on the about:config page to disable Color Management. 
You need to close and restart Firefox to make the change effective. 
See:
* http://kb.mozillazine.org/gfx.color_management.mode
See:
* https://developer.mozilla.org/En/ICC_color_correction_in_Firefox
Caveats: The new QCMS color management system introduced in Firefox 3.5 currently only supports ICC version 2 color profiles, not version 4.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

HP Color LaserJet Pro MFP M177fw How to Scan

I just bout the HP Color LaserJet Pro MFP M177fw printer today and don't know how to use the scanner. I use Windows 8 operating system. Please advise how to use th scanner function. Thanks.

Hi, From page #38 of the manual: Scan by using the HP Scan software (Windows)
Use the HP Scan software to initiate scanning from software on your computer. You can save the scanned image as a file or send it to another software application.
1. Load the document on the scanner glass according to the indicators on the product.
NOTE: For best results, load small-size paper (Letter, A4, or smaller) with the long edge of the paper along the left side of the scanner glass.
2. Click Start, and then click Programs (or All Programs in Windows XP).
3. Click HP, and then select your product.
4. Click HP Scan, select a scanning shortcut, and then adjust the settings if necessary.
5. Click Scan.
NOTE: Click Advanced Settings to gain access to more options.
Click Create New Shortcut to create a customized set of settings and save it in the list of shortcuts. Regards.

Acrobat X Pro-no scanned images visible

I recently bought Acrobat X Pro and try as hard as I can, I cannot get any scanned images to show up. The pages are gray. A pdf from Word, etc. is all right, but not if it's a scanned image. I went throught a couple of the tutorials on how to scan documents, but so far nothing has worked. Google Books that were downloaded as PDFs earlier are the same way. Only the 1st page with the Google blurb shows up. All other pages are gray. I can open and read them in Reader X.
Janet Tanksley

Working now - followed fix in http://forums.adobe.com/message/4775416

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week, Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.
The file name has no special character in it, just letters and no spaces.
I have done this in the past and it has worked, but now it will not.
I have not upgraded any software, that I am aware of.
After scanning, the Image Capture pops up the Scan Results with the file name in the window, but neither the Scan Results nor the Image Capture window responds to inputs. The Image Capture window is frozen, with only the "Overview" and "Cancel" buttons active (but non-responsive).
Is this a software issue or a scanner hardware issue? I am using a HP Photosmart C6200 series printer/scanner on a network using a Time Capsule airport.
Thanks.

I had the same problem.
Got a 90% fix. Apparently the Mavericks preferences won't work with Yosemite, so I just deleted the Image Capture preferences.
Unfortunately, the "Scan to" folder seems to be permanently set to the Pictures folder.
1. Quit Image Capture
2. Go to Finder > Go > Home, which opens up your home folder (named after your user name)
3. Open Library > Preferences > com.apple.ImageCapture.plist - Drag this file to the Trash
4. Start "Image Capture", click "Details" and change all your settings as you prefer
5. Quit and restart "Image Capture". Notice it remembers all your settings except "Scan to" folder. It insists on saving to "Pictures".
That's as far as I was successful. I tried changing the "Scan to" folder to "Desktop", but on launch, Image Capture always sets it back to "Pictures".
This is what I tried:
6. Download and install "Pref Setter" from http://www.nightproductions.net/prefsetter.html
7. Quit "Image Capture". Right-click on "com.apple.ImageCapture.plist" and open with Pref Setter.
8. Search for "Pictures", which finds "~/Pictures" (the tilde character at the start means your home directory).
9. Double-click on "~/Pictures" and change it to the folder you prefer. I like "~/Desktop"
10. Choose File > Save then Quit from Pref Setter. Note that re-opening the plist file still shows "~/Desktop"
11. Start up "Image Capture" -- on startup, "Image Capture" sets "Scan to" folder to "Pictures"
I consider this a bug.

How To Fix Color Registration in Scanned Images

Hi --
I have been struggling with a problem, one that may have a relatively simple answer, but I'm just not enough of a PS wizard to come up with it.
Here's the problem. A lot of my PS work is on scanned images from newspapers. These 4-color images often have out of register colors. Here's an example:
This example is particularly bad, with all the registers out of whack (not the colors intruding in the word balloon, the skin tones not staying within the lines of the heads, etc.). I assumed I could fix problems like this pretty easily by switching the image to CMYK, and then nudging the C, M and/or Y channel contents around a little so that they'd line up properly. But I found that this seemingly obvious and simple solution didn't work at all, because as you can see in the Y channel:
it not only contains yellows, but also the yellow component of black. So if I select everything non-white in the Y channel and nudge it into place, this is what I get:
Now I have created a yellow 'shadow' of all the black portions of the drawing (especially obvious in the word balloon in this example). So I'm obviously going about this the wrong way. Can anyone help?
Thanks!

Hassy wrote:
This is a fantastic website and information is also outstanding like ccnp magnificent in study affairs. I am very mindful about ccsp. results. I want help or good resources that prepare me and give best guidance for cisco certification. Have you any awareness about it?
crm certification ll db2 certification dumps ll ence ll itil braindump
Huh????

My macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

my macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

Might be a problem with the adapter.
Help here > Apple Portables: Troubleshooting MagSafe adapters

Scanned images won't fit photo boxes in book

Hi.
Well, I am working on a book filled with letters from my grandparents (Old Toad, thanks for your earlier help). I've tried scanning them in and then placing in the boxes, but they are being cut off. When I try cropping at the 4x3 image, I still loose the images. Is there anyway to prevent this from happening?
Thanks in advance!

If you don't see any cutting off of the scanned images in a frame you shouldn't have to crop them. There's an option when you Control-click on the photo in the frame to "Fit to frame". If the photo is 4:3 I think it will be scaled up to fit the window exactly. If it's not then the larger size is scaled up to fit, leaving more white space on the shorter side. It's a minor thing, mostly aesthetic in nature.
Before completing the ordering process I suggest to find and copy the pdf file that is produced by iPhoto for uploading and printing to review carefully. Just to be on the safe side. Here's how:
How to Find the iPhoto Generated PDF File:
1 - Start the ordering process and stop after the book has been assembled and you get to the Order pane where you select the cover color, copies, etc.
2 - Go to the Finder and select the Go->Go to Folder menu item (CommandShiftG).
3 - copy the following, “/private/var/tmp/folders.501/TemporaryItems/iPhoto” (for Panther the path is "/private/tmp/501/TemporaryItems/iPhoto“), and paste into the Go to Folder search box.
4 - the iPhoto folder will be brought up. In it will be the PDF file that was generated by iPhoto. You can copy it (Option-drag) to the Desktop to review and/or save.
Note: the iPhoto folder will not exist before you start the ordering process and is deleted after the order is completed or after you cancel the order and quit iPhoto.

8600 scanner won't produce scan image after overview performed

Using 8600 All-inOne with Mac OS 10.9.4: Problem with scanner-- After scanning overview performed; when I try to scan, I get the message "Done scanning selected areas" and no scanned image has been saved to Documents. Thanks for help!

Hi @KateSR , and welcome to the HP Forums!
I see you are experiencing scan issues. I would like to help!
Do these issues occur when making a copy from the scanner glass or feeder, or just when scanning?
I would recommend performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My old Mac book pro won't startup. When tried I get an argyle colored apple and the clock spins until it stops, then nothing. Tried the cmd, alt, p,r but that gets a different designed apple?

My old MacBook Pro won't start up. When tried I get an argyle apple and the clock spins, then nothing. I tried cmd,alt,p,r 3 x before gong and now I get a striped apple but still not startup.

Whcih model MacBook Pro do you have (e.g., "15-inch Late 2011")?
Which version of OS X are you running?
Clinton

My labeled files on my macbook pro won't stay colored

my labeled files on my macbook pro won't stay colored

Ok, in theory you cannot lock the hard drive, so, run Disk Utlities, First Aid, Repair Hard Drive again. It should come back with a message that all is OK. Then run Repair Permissions. That often returns a lot of messages that are not actually problems, just grumbling by the system.
Then try a normal restart by clicking the apple left side of the menu bar, Restart. If you restart normally all is fine.
If not, then restart on the recovery HD again and try an Install Mac OS X and see if that succeeds this time.

Print the scanned image LaserJet Pro M1536dnf

After firmware upgrade fo version 20111215 to 20140123
Having problems with print scanned image.
The scanned image is printed blurry and small pixels.
How to bring back the old version of the firmware?

Hi Senja,
Welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing an issue with scanned images printing blurry and small pixels since updating the printer's firmware. I will be happy to help you.
Unfortunately you can't roll back the firmware on the printer.
I would do a power reset to see if that will resolve the issue.
With the printer still turned on, disconnect the power cable from the back of the printer.
Then disconnect the power cable from the wall outlet.
Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
I have provided a document for Troubleshooting Scan Quality Problems.
Try making a copy to see if you have the same results.
If you would like further assistance from me, please let me know the following results.
What application are you scanning from?
Does the scan look alright on the computer?
Are you just having this issue printing the scanned image?
What is the DPI of the scanned image set to?
Thank you for posting on the HP Forums.
Have a nice day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro M1536 just copy and scan lines

HP LaserJet Pro M1536 just copy and scan lines
Hi, I have a problem with the multifunction suddenly.
When I make a photocopy or when I scan to PC, both the ADF glass, leaving only the lines without any image of the sheet that I'm scanning. If mold from windows instead working normally.
What might be?
Greetings.
Raffaele
HP LaserJet Pro M1536 copia e scansiona solo righe
Salve, ho un problema all'improvviso con la multifunzione.
Quando faccio una fotocopia oppure quando scansiono verso il pc, sia dal vetro che dall'adf, escono solo delle righe senza alcuna immagine del foglio che sto scansionando. Se stampo da windows invece funziona normalmente.
Da cosa può dipendere ?
Saluti.
Raffaele

Hi Opp1,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to reinstall the printer software.
I will be happy to help you.
The print spooler is part of the Windows operating system and if it doesn't stay running the printer software won't install or print.
You could try the following steps to see if this will resolve the issue.
Normally with spooler problems the first thing to do is to clear the print queue.
Open a Run window (Windows Logo key+R), type cmd and press Enter.
Now type these commands, which are in capitals for clarity:
NET STOP SPOOLER and press Enter
DEL %SYSTEMROOT%\SYSTEM32\SPOOL\PRINTERS\*.* and press Enter
NET START SPOOLER and press Enter
EXIT and press Enter
If you are still having issues with the print spooler stopped then right click on the start button, left click on explore, open the windows folder, open system32 folder, open the spool folder, open the printer's folder, then delete everything on the right window.
Then go back and try and start the print spooler again.
Run a full uninstall of the printer software. Disconnect the USB cable.
To uninstall from CD:
Go start and select computer.
Right click on the CD for the printer and left click open in a new window.
Double click on uninstall.
Uninstall printer from the C Drive.
Go to start, computer, c:, windows, program files or program files x86, HP, printer name. Double click uninstall. Restart the computer.
Check to make sure the print spooler is running.
Ran the installation again. Don't connect the USB cable until prompted.
If the print spooler stops again you will need to contact the computer manufacturer to resolve this issue.
Hope this helps.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to highlight / draw onto a pdf document that is a scanned image, then save the added elements

Hello
I'd like to add markings / little annotations or highlight as if with a color marker various sections of a scanned image that has been sent to me in pdf format, which I visualize with Adobe Reader 9 on my PC (Windows). I need to save the changes and then send it back by e-mail to the original sender.
So far I've been awkwardlky making copies of my screen (PrintScreen function) of each individual page of the pdf document, then pasting them into PowerPoint slides, then using various PPT drawing and textbox functions to add my stuff to the, now, PPT file, which then I sent back as such. This is very time-consuming and ridiculous and there's got to be another way of adding these changes within Adobe Reader or another similar software, doesn't it?
Again, the pdf docs that I need to work on are scanned images (medical charts), not actual copiable text (pardon my ignorance of the correct terminology to explain this).
Thank you for your help,
Falingo

So the solutions are:
1. "Buy Acrobat"....which Adobe Acrobat ?....Stanard, Pro, etc (...obviously I'd like the most basic and cheapest...which one is that?)
or
2. "Enable doing that in the Reader"....how exactly am I supposed to do that?
F

Need help editing scanned images of old photo album pages PSE 9

Before I begin this project, I thought I'd get some advice from someone who has undertaken a similar project. I have three photo albums from the 50's and 60's. The albums were made by my mother who mounted the photos (mostly black and white but some color photos) on construction paper (of various colors) using the corner holders or glue. She hand cut the construction paper so each page is not a perfect rectangle ( about 11" tall, 8.5" wide). The pages were punched and put into a three-ring binder.
She added text to the edge of the photo and/or to the construction paper. Each page contains one to 6 photos and text. Each album has about 120 pages. I want to keep the notes on the construction paper so I scanned each page into a TIF files, 400 dpi and stored the images in a separate folder for each volume.
I use (poorly) PSE 9. I see it has a auto straighten/crop feature that can be used one photo at a time. I tried the divide scanned images function and that did not fully separate all images on the page and also created an image for stray objects on the page such as an unused corner holder. (I know those things have a better name but it escapes me now.)
I plan to create photo books for my siblings. I am now thinking of cropping the image of each page (rather than each photo on the page) into a uniform size, adjusting levels, contrast and sharpness, saving this image to a JPEG file, and using these edited JPEG images to create the photo book. Since each page was hand-cut, there will areas of white where one page was torn or cut smaller than another page. Some pages will have blanks where old photos have been lost leaving behind only the corner things. It won't be perfect but it will be an image of the album as it exists today.
My questions are:
The pages are about 11 by 8.5. Does anyone know a photo service that prints photo albums in a portrait layout in this size? I have been unable to find one; it looks like most online photo books are wider rather than taller.
Let's assume I use a company such as Shutterfly that offers a 12x12 format. I assume it would be better to edit the images in PSE9 rather than any online software. What should I do to keep the proportions in the current images true but make the image fit a 12x12 page, for example?
IS there any other editing software anyone can recommend that will speed this up, hopefully a software that would take multiple photos at one time, auto-straighten and auto crop to a set size? And also auto contrast/level/sharp. If I could use such auto features on these images and then go back and adjust the photos that did not play well with the auto features, that would save me time.
I appreciate anyone's input. I dread doing this but we have one set of photos and 5 siblings so it has to be done. Thanks!

Hi,
Mentioning your issues one by one:
1) PSE does not have any portrait Photobook available, so your thought was the best way to get the work done is by choosing the 12x12 - shutterfly one.
2) PSe does a good job of editing the images. You can set your images of approx. 11x8 size to fit to the 12x12 page. Just choose a one photo page Layout for the page and then right click on the image to " Fit photo in the frame".
3) If more edits are required for the image, you can easily go to Advanced mode and edit your photos, layouts, move the frames, images or add effects to the images.
4) Photo book creation sure takes time. because, you want it to be the best. I am sure PSE would help you best here.
Go ahead and create you photobook. Inc ase you get stuck somewhere, you can always post here to get help!
Cheers,
Swarnima

Sketchbook Pro won't color in scanned images?

Similar Messages

Maybe you are looking for