Skype on Panasonic P50VT20B no longer able to log ...
I've had skype working fine on my TV since I first got it over 3 years ago with the official Panasonic camera, then the other day I checked and it wasn't logged in so re-enetered my account details and then it came up with the "Cannot sync contact list" error message.
I've tried adding my birthday to my profile (along with the other crap it demands you fill in to save it) and it's made no difference at all. I can log in everywhere else (windows phone, ipad, surface, PC etc...) but the TV is having none of it.
Is there any solution to this, because having forked out over £100 on the camera this is just not acceptable to suddenly have it be a useless pile of junk?
First, I would try to remove any login startup items under System Preferences -> Accounts -> ACCOUNTNAME -> Login / Startup Items under that account.
I've had varying problems with blue screens on OS X.4 and with one machine I was unable to solve the problem, even after deleting the user account and moving all the files to different location, and recreating the account. As a last resort, you can try to move the user's home folder to someplace else on the HD, then login with the account and have OS X recreate all the files associated with the account. If that works, you can move back the files that the user needs. You might want to see what others suggest before trying that.
Similar Messages
-
Skype 7.10 application no longer able to log in any user, check for updates, or change online status
Hello Community,
Thanks in advance for looking into my problem report.
First off, I'm running Skype version 7.10 (777) for Mac, on my MacBook Pro Retina running Yosemite 10.10.4. I've been using Skype on this setup flawlessly for months. Recently, after adding some more credit in advance of making an international call (which worked fine), I ran into a weird problem. I can't be more specific about the initial problem, as I kind of dismissed it at the time, but it was some kind of error window from Skype regarding my attempt to add credit (which did work, btw - I see the updated balance and my bank account was debited as intended).
Now however, I cannot use the Skype application in any way. When I attempt to sign in - whether on my account (with the right password or a bogus password), or on another valid account, the application just displays the spinning balls graphic for several minutes and then reverts to the sign in screen. After rebooting my Mac, I was able to use Skype again, but now it's back to this behavior after I quit Skype. I've got a lot of work-in-progress right now and don't want to keep rebooting to try to get past this.
Note that my account/credentials is clearly not the issue; I can use Skype from my iPhone 5S no problem, and from Skype web on the same Mac. But the application itself on my Mac is DOA, whether using my account or another person's. Even the Check for Updates just stalls forever.
I have already downloaded the Skype app again and paved over the old one, and that makes no difference.
I also trashed my Library/Application Support/Skype, and restored a copy from backup prior to this problem, but it made no difference.
I've verified that my Mac firewall is not the issue - I've tried it with the firewall on and off without affect.
If anyone has a clever idea - or knows how I can get some kind of diagnostic log about what the app is doing when it's trying to contact the mother ship - please let me know!
Thanks again
[Topic title updated by moderator to include version number.]I'll add that when I run devenv.exe with the flag /TFSLink, VS opens a Team Explorer window that contains the following text:
An exception was encountered while constructing the content of this frame. This information is also logged in "C:\Users\<username>\AppData\Roaming\Microsoft\VisualStudio\11.0\ActivityLog.xml".Exception details:System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.VisualStudio.Shell.Interop.IVsShell5.LoadPackageWithContext(Guid& packageGuid, Int32 reason, Guid& context) at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.GetPackage() at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConstructContent() -
LDAP user no longer able to log in
We have CQ 5.3 set up using LDAP authentication. We have one user who has been using CQ with her AD Userid/password for over a year with no issues, but she came in one day and now it's saying her user id and password don't match.
We've tried on multiple different instances of CQ and she gets the same message every time. She is able to log into other applicaitons that use LDAP for authentication just fine. We have tried resting CQ to see if that resolves the issue and it hasn't. I originally thought it was some sort of issue with her LDAP account, but because she can log into other apps, I'm wondering if not? Or maybe there WAS an issue with her account, but it was resolved (she thought maybe her account was locked, so she ran an unlock procedure), but CQ just hasn't caught up to that fact? This started happening a week ago.Hi Jennifer,
Have you tried running a manual LDAP User sync for the single user (http://localhost:4502/crx/config/ldap.jsp)? Since the user can login to other systems via LDAP, the problem is most likely with their account in CQ. Maybe try deleting their account in CQ and re-creating/re-sync via LDAP User sync.
Hope this helps.
Ron -
All of a sudden I'm having having problems logging into my bank account, work email, and my credit card webpages. I'm able to log into these websites on other computers. Im not sure what to do.
If you are using Safari ...
From the Safari menu bar click Safari > Reset Safari
Select the top six boxes then click Reset.
Quit and relaunch Safari to test.
If that didn't help, open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari.
See if that worked ... -
Skype application no longer able to log in any user, check for updates, or change online status
Hello Community, Thanks in advance for looking into my problem report. First off, I'm running Skype version 7.10 (777) for Mac, on my MacBook Pro Retina running Yosemite 10.10.4. I've been using Skype on this setup flawlessly for months. Recently, after adding some more credit in advance of making an international call (which worked fine), I ran into a weird problem. I can't be more specific about the initial problem, as I kind of dismissed it at the time, but it was some kind of error window from Skype regarding my attempt to add credit (which did work, btw - I see the updated balance and my bank account was debited as intended). Now however, I cannot use the Skype application in any way. When I attempt to sign in - whether on my account (with the right password or a bogus password), or on another valid account, the application just displays the spinning balls graphic for several minutes and then reverts to the sign in screen. After rebooting my Mac, I was able to use Skype again, but now it's back to this behavior after I quit Skype. I've got a lot of work-in-progress right now and don't want to keep rebooting to try to get past this. Note that my account/credentials is clearly not the issue; I can use Skype from my iPhone 5S no problem, and from Skype web on the same Mac. But the application itself on my Mac is DOA, whether using my account or another person's. Even the Check for Updates just stalls forever. I have already downloaded the Skype app again and paved over the old one, and that makes no difference. I also trashed my Library/Application Support/Skype, and restored a copy from backup prior to this problem, but it made no difference. I've verified that my Mac firewall is not the issue - I've tried it with the firewall on and off without affect. If anyone has a clever idea - or knows how I can get some kind of diagnostic log about what the app is doing when it's trying to contact the mother ship - please let me know! Thanks again
I'll add that when I run devenv.exe with the flag /TFSLink, VS opens a Team Explorer window that contains the following text:
An exception was encountered while constructing the content of this frame. This information is also logged in "C:\Users\<username>\AppData\Roaming\Microsoft\VisualStudio\11.0\ActivityLog.xml".Exception details:System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.VisualStudio.Shell.Interop.IVsShell5.LoadPackageWithContext(Guid& packageGuid, Int32 reason, Guid& context) at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.GetPackage() at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConstructContent() -
MBP no longer able to log in on WIN2003 FILE server
New MBP in Aug,08. Able to access WIN2003 file server with typical clicks in Finder. Then comes October upgrade to Leopard, and this results in only being able to access file server by Finder>apple+k>connect to server by smb://##.##.##.##
Finally in December after an "upgrade" on the file server done by our IT person, I can no longer access the file server. I perform either of the above approaches to logging in and it just "hangs"...no error message, it just keeps trying, but never says that it can't find the server.
So, the IT person has done changes like taking down firewall and changing some of the enable/disable settings recommended on other chat sites for similar issues, but to no avail. HELP!Never mind...my password to access file server contained a character that was not acceptable. Once changed, access restored.
-
No longer able to log into websites with Safari 3.1
Ever since updating to Safari 3.1, I can no longer log into websites (such as my company's Campfire account). It looks like I'm having a problem similar to those described by people who were using Cosmopod 2.2, however...
I don't have (nor have I ever had) Cosmopod installed.
I also don't have an Input Managers directory in /Library or ~/Library.
I've removed all my internet plugins in /Library/Internet Plug-ins
I've reinstalled Safari using the 3.1 standalone installer.
I've tried to downgrade back to 3.0.4 using the Leopard 10.5.2 combo installer (but I can't seem to actually get the combo installer to run).
Any thoughts as to other programs which might be causing Keychain hijacking?
- Jaredtried it and spent the last 30 min. trying to log in
as adminstrator..
still no luck with getting through on secured sites..
any other thoughts? did the disk utility,etc..
He is something to try:
Go into the Control Panel open Accounts, create a new
user. Log into the new user account, open Safari and
try connecting to a well know site that uses SSL...
If it works, it means something is wrong with your
Safari settings in your account, bad preferences,
etc...
If it doesn't work, you have to delete system-wide
Safari preferences, and perhaps start with Disk
Utilities, Verify Permissions, etc...
Hagrid... -
Safari no longer able to log into secured sites??
" because it couldn’t establish a secure connection to
the server".
This is the error message I've been getting when either logging in
or visiting secured sites.
I recently defragmented my powerbook, and don't know if this
would have caused a security issue or not.
I'm able to view other sites with no problem. just the secured sites
I'm blocked from visiting.
Checked my preferences..cleared cache.. don't know what happened.
I was able to visit secured sites beforehand.
any thoughts?? ~A~tried it and spent the last 30 min. trying to log in
as adminstrator..
still no luck with getting through on secured sites..
any other thoughts? did the disk utility,etc..
He is something to try:
Go into the Control Panel open Accounts, create a new
user. Log into the new user account, open Safari and
try connecting to a well know site that uses SSL...
If it works, it means something is wrong with your
Safari settings in your account, bad preferences,
etc...
If it doesn't work, you have to delete system-wide
Safari preferences, and perhaps start with Disk
Utilities, Verify Permissions, etc...
Hagrid... -
No longer able to log in except for manually.
I've been switching between gnome-shell, openbox (stand alone) and XFCE trying to figure out which I want to use (deleting the settings after each switch) and now it won't let me login using openbox at all anymore; XFCE works if I do it manually. If I add GDM to the daemons list, it ignores it completely; If I add slim to the daemons list it gives me the error:
Failed to execute login command
Trying to start Openbox manually gives me an error something along the lines of:
Openbox-message: Failed to open the display from the DISPLAY environment variable
I'm tried removing the entire Openbox folder and the .xinitrc file and copying them back to my home folder and ~/.config, rebooting but still getting the same sort of errors.kgas wrote:The error message for the openbox is clear. what your $DISPLAY variable says?. GDM does not use .xinitrc.
Well, the .xinitrc comment was for telling xfce and openbox to start, not GDM; I had that set in the daemons list.
But for my display variable, I'm assuming you mean the openbox environment file. It appears to be default without any really "changes" or whatever.
# Set system-wide environment variables here for Openbox
# User-specific variables should be placed in $HOME/.config/openbox/environment
# To set your language for displaying messages and time/date formats, use the following:
#LANG=en_CA.UTF8
# To set your keyboard layout, you need to modify your X config:
# http://www.google.com/search?q=how+to+set+keyboard+layout+xorg -
In IPhoto '08, in Library/Photos, I'm no longer able to view a screen of thumbnails. I'm only able to view a single photo at one time. This was not true in the past.
Note the slider lower right of the iPhoto Window. Drag it left.
Regards
TD -
Imac is no longer able to open the Configuration file
Hi ,
I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
I tried using the Airport Setup assistant (imac), I received this message:
"Appropriate Airport hardware was bot found on this computer,if you recently
Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
The imac does not have a card, nor do i think it needs one.
I would like to be able to at least open the configuration file.
Thank you for reading my post.
Eme
Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.4)Hi Kes, a star for the company !
I made an error on my first post I have a Netopia modem, Airport router.
And so it remains, i guess that there must be an easy answer somewhere
that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
Good luck,w/ this Q.
regards Eme
Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.5) -
My computer has been infected by a Trojan Horse. It has taken over my Mac email account and began sending out malicious emails to everyone in my address book. I cleared out my MAC address book and began using my AOL email account. It took a few days and then my AOL email account was infected and has now been send out malicious email to all my contacts for over a month. It has also infected my iPhone--I am no longer able to send or receive emails on my iPhone. Also, once the Trojan Horse began using my AOL email it completely blocked me from using my MAC account by sending never ending popups asking for my email password to access my MAC email account, but it never accepts my pass word. The TH has also slowed down everything on my computer. It's like I am working on an old PC with dial up connection instead of the high speed digital connection that I have. The little color wheel spins constantly as I wait for sometimes over a minute for a page to pull up. If it pulls up at all. I have tried to use the 2 disks that came with my computer to completely remove everything on my computer and then reinstall all the programs, but I am not allowed to sweep my computer clean. I thought maybe my disks that came with my computer were defective so I called Apple and they sent me 2 new disks. I am not able able to clear my computer with the 2 new disks either. I have done this before successfully so it's not something new to me. I do remember when I believe my computer became infected: I had googled an unusual sewing term, and I was opening what appeared to be legitimate sites, when all of a sudden a pop up appeared that said that my computer had been infected. I immediately shut my computer off, but it was too late. I downloaded a virus program for Mac, and it has never found a virus or problem at all. I think it is part of this Trojan Horse, but I am unable to delete it from my computer. It refuses to uninstall. The Mac Trojan Horse is real and it is terrible. If anyone has any suggestions for me I would be very appreciative,
Beth
vuInstall ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I have snow leopard. Using iCloud, I can receive email on my mac, but, suddenly, I am no longer able to send email from the mac. I can send it from iCloud online. Any thoughts on how to regain the abilty to send email from my mac? Thanks.
Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?
It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0 -
I am running Mac OSx Lion 10.7.2.
My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html
Maybe you are looking for
-
Hi, I have some problem with the authorization. Here is the scenario, I need to make one user in to access BI report, but only from one cube(let say cube A). The user cannot access, display or execute any others report except the reports generate fro
-
Web Services Test ORA-28150: proxy not authorized to connect as client
Oracle 11g R2 APEX 4.2 with the latest listener. Trying to click on the test button on the Oracle.example.hr sample under the SQL WORKSHOP Restful Services and receive the following error: Internal Service Error 500 Error during evaluation of resourc
-
Why doesn't my mail send. My outbox is full of unsent mail.
My outbox is full of unsent mail. How do I send it?
-
Exchange 2007 Block incoming meeting requests?
Hello, Is there any way to block incoming meeting requests on an Exchange 2007 server and have it send a message back saying the server doesn't accept said requests? I know it can be done in Outlook with a rule but we would like to block them at
-
My mouse fell now the scroll/zoom option doesn't work. Any tips?
My mouse fell from the couch to a carpeted floor. Now the scroll/zoom option doesn't work. Any tips? It landed and rolled a bit.