SLD Steps for starting a XI project

1. I want to know, what steps i need to do in SLD to start a XI project.
2. Can i do XI project without SLD?.
3. What is the real use of SLD?. Is it physical location or logical location of components?.
4. SLD is used only by XI?. or any other module of SAP share SLD?.

Hi,
>>>>>1. I want to know, what steps i need to do in SLD to start a XI project.
you need to define technical and business system per every SAP system
and create your own sotware components
>>>>2. Can i do XI project without SLD?.
impossible
>>>>3. What is the real use of SLD?. Is it physical location or logical location of components?.
logical location of all software descriptions
>>>>4. SLD is used only by XI?. or any other module of SAP share SLD?.
SLD is used by many SAP applications not only XI
Regards,
michal

Similar Messages

Suggestions for starting a CMYK project

I keep getting results for converting rgb to cmyk and vice versa but I only need some step-by-step instructions for how to start a new document in CMYK and best 'settings' suggestions.
I am working on a logo for someone that will be using a commercial printing press for their output and this doc will start out at a size of 8.5 x 11 using Photoshop CS2
Any help appreciated.
Thanks
Dave

Also I am looking for info on setting prior to going to print.
Just make sure you pick the right CMYK profile (ask!). Standards vary around the globe, and with different printing conditions.
You also need to watch total ink limit. This is specified in the profile and is typically 300 - 330% (full coverage would be 400%) - but if you make subsequent adjustments it's easy to exceed the limit. Use the info panel (it can be set to read out total ink).
In any case logos are better off as vector files, not raster (for scalability). Illustrator would be a better tool.

PS module ---Functional steps in Investment and Customer Projects in PS

Hi Experts,
I am new in PS module,Pls tell the steps in----->
1>Investment Project---The steps and transactions in PS according to Flow of PS module in Investment project from start till end of PS.
2>Customer Project--The steps and transactions in PS according to Flow of PS module in Customer Project from start till end of PS.
I    want to know functionally how the above Projects operate differently functionally with transactions and Flow.
Regards,
Rahul

Hi Rahul,
In addition to link provided above , please have a look on functional steps for Typical Investment & Customer project scenarios as follows.
Investment Project
1. Create a suitable WBS using Project builder.
2. Plan basic dates manually for WBS elements using Project planning board
3. Plan costs manually for WBs elements using Easy cost planning
4. Budget WBS elements
5. Enter actual dates during the project execution phase.
6. Assign various documents for WBS elements using Execution Services for updating commitment &
   actual costs.
7. Calculate overhead costs & carry out settlement to assets under construction or completed asset in
   Asset accounting.
Customer Project
1. Create a customer inquiry in SD.
2. Create a project (WBS & Network) using standard structures
3. Plan dates using Scheduling
4. Plan Resources
5. Plan materials by transferring Bills of Material
6. Plan costs using Network costing
7. Create sales pricing data ( Create quotation bases on project cost plan,Plan revenues for project)
8. Create a sales order with a bliing plan in SD
9. Create confirmations ( using CATS)
10. Purchase matetrials & services.
11. Document variance usign claims
12. Post Revenues using Milestone billing
13. Calculate overhead costs,carry out a results analysis & settle results analysis values to profitability
      segment.
Regards
Tushar

Start Of Ramp-Up for SAP Portfolio and Project Management 5.0

Start Of Ramp-Up for SAP Portfolio and Project Management 5.0
Starting with this new release, the application SAP Portfolio and Project Management 5.0
replaces both the SAP Resource and Portfolio Management (SAP RPM) application and the
Collaboration Projects (cProjects) application.
Start of ramp-up for SAP Portfolio and Project Management is 19th of April, 2010. The end
of ramp-up is currently scheduled for 19th of October, 2010.
Functional Innovations And New Features
A detailed description of all new and/or enhanced functional innovations and features can
be found in the Release Notes:
[http://service.sap.com/releasenotes |http://service.sap.com/releasenotes]
-> SAP Solutions
    -> Release Notes SAP Portfolio and Project Management
There are some SAP Notes which are in general very important for SAP Portfolio and Project
Management 5.0 and which also serve as central points of entry to find import information:
SAP Note [1377104|https://service.sap.com/sap/support/notes/1377104]      FAQs - SAP Portfolio and Project Management 5.0
SAP Note [1402912|https://service.sap.com/sap/support/notes/1402912]      PPM 5.0: Supported Browsers, Java versions, etc.
SAP Note [1411953|https://service.sap.com/sap/support/notes/1411953]      PPM 5.0: Configuration Content
SAP Note [1436778|https://service.sap.com/sap/support/notes/1436778]      SAP Portfolio and Project Management 5.0: Restrictions
Kind regards,
   Florian

Thanks very much for taking the time to post the info Florian. I will update this thread as well if I run into any new information.
Do we have any idea on SAP's direction for Product Definition? PD is still version 2.0 and I heard that PD functionality will be incorporated into PPM 5.0 which does make a lot of sense. I very briefly went through the notes and config doc in this post and did not get the impression that PPM has any idea and concept management capabilities.

TS3391 iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project.

iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project. I googled the problem and there were discussions about deleting files in various folders and renaming clip extensions. I don't like the solutions I saw there and I am not sure they will work.

Nobody replied so I called Apple. They seemed to think they could fix the problem but I had to agree to pay about $20 first. I told them to put it down as a complaint. I only want to use the software I bought. I can't see that it is my fault it is malfunctioning. I guess I will have to pay. It doesn't seem right.

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
 <property file="./Properties/fuego_deploy.properties"/>
 <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
 properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
 importdata = "${fuego.importdata}"
 automaproles="${fuego.automaproles}"
 automapbuspars = "${fuego.automapbuspars}"
 automapvars="${fuego.automapvars}"
 automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
# •Holiday and Calendar rules
# •Organizational Units
# •Roles
# •Resource configurations
# •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

No Project IMG has been defined for Starting Reference IMG SOLMAN ERROR

Hi All,
I created a off release project in prodcution and assigned logical compenents. When I am trying to create a IMG object for SPRO it is showing an error stating that "No Project IMG has been defined for Starting Reference IMG ". when I click Ok button it is showing another message ""Screen output without connection to user.". I Verified in project administration(solar_project_admin)> System Landscape>IMG projects, status for distributing IMG projects to component systems is showing in Red color. No IMG projects have been distributed into the system.
RFC connections are showing are correctly. I am not able to find the problem and solution. Could any one help me to figureout the problem and what needs to be done
Thanks in advance,
Sreekala Rapuru.

Is it mandatory that i need to create a project view?
I have created a view "activity necessity", but not have selected any of the check boxes in "mandatory/optional/nonrequired". As well i havent generated it. I can do the "configure" now without errors
my question is - is there anything critical which is related to this views? I went through the help page you sent me.. Is this for creating the implementation guide? any guidelines you can send me about this is highly appreciated.
thanks!

My PC crashed by starting CANcard selftest in the last step for installation?

Hi,
I have tried to reinstall the CANcard and LabVIEW but my PC crashed by starting CANcard selftest which is actually the last step for installation?! Previously this CANcard worked on this PC but becuase by mistake two different LabVIEW versions have been installed, I reinstalled Win XP and now ...
I have already tried with LabVIEW7 and 6 plus CANcard driver 2.1 and 2.2 but that did not help.
Thanks for any hint.

what means crashed your PC? A blue screen came up or the MAX rashed?
The problem could be caused by 6.0, because the driver was installed by the LabVIEW Installer of this version.
This can cause problems with newer drivers, like CAN 2.x.
try to uninstall all LV versions and all NI drivers.
Then check with attached programm for NI components and uninstall the rest. Then remove the CAN board from your computer and start again.
Now install LV 7 and then the driver 2.2.
Then plug in the board and now it should work, if not contact the NI Support.
Attachments:
msiBlast.exe ‏232 KB

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the automatically uploading of old material?
Thanks

You have 2 unreachable statements in this method.
public static int eval(String s2, String op, String s3) {
return lookup(s2);
return lookup(op);
return lookup(s3);
} You're missing a } at the end of this method:
public static int lookup(String s) {
 for(int k = 0; k < symbols.length; k++){
 String symbol = symbols[k];
 if(s.equals(symbol))
 return k;
 }You have some loose } and ; at the end of the file:
public static void main(String args[])
commandline();
}

I just downloaded after effects and opened it for the first time and i can't start a new project

everytime i click on the bar above the program to start a new project it crashes

Sorry to hear that. Perhaps you ought to provide some information for diagnostic purposes:
FAQ: What information should I provide when asking a question on this forum?

SLD registration for TREX not working...

SDN Members,
I am unable to register TREX in SLD. I have put in an OSS message; however, I have yet to receive a response back from SAP... So any help would be much appreciated.
Thanks,
-Patrick
Steps for the Reconstruction
1. Generate SLD Configuration file:
sldreg -configure /usr/sap/TXD/TRX85/slddest.cfg
2. Copy the SLD Config. File to the Global SLD Directory and run
command (to transfer data to SLD):
saposcol -b | sldreg -connectfile slddest.cfg -stdin -oldtransferdtd
Receive the following:
(hostnames, ip's, and ports altered to protect the innocent)
prtdiag can only be run in the global zone
Thu Dec 27 10:33:04 2007 SLD Registration Program [2.0] (May 8 2006) [None Unicode]
Thu Dec 27 10:33:04 2007 No XML data input file set. Will read input data from standard input.
Thu Dec 27 10:33:04 2007 Supplier Name: ComputerSystem / Supplier Version: 1.0 / Supplier Vendor: / CIM Model Version: 1.3.21
Thu Dec 27 10:33:04 2007 Group:
Thu Dec 27 10:33:04 2007 Group name system1
Thu Dec 27 10:33:04 2007 validateAttributes OK
Thu Dec 27 10:33:04 2007 Property Status
Thu Dec 27 10:33:04 2007 Value OK
Thu Dec 27 10:33:04 2007 Property NameFormat
Thu Dec 27 10:33:04 2007 Value IP
Thu Dec 27 10:33:04 2007 Property Caption
Thu Dec 27 10:33:04 2007 Value hostname01
Thu Dec 27 10:33:04 2007 Property Name
Thu Dec 27 10:33:04 2007 Value usahstxutxd01
Thu Dec 27 10:33:04 2007 Property IPAddress
Thu Dec 27 10:33:04 2007 Value X.X.X.X
Thu Dec 27 10:33:04 2007 Property OpSysReleaseName
Thu Dec 27 10:33:04 2007 Value SunOS
Thu Dec 27 10:33:04 2007 Property OpSysCategory
Thu Dec 27 10:33:04 2007 Value Solaris
Thu Dec 27 10:33:04 2007 Property VendorRelease
Thu Dec 27 10:33:04 2007 Value SunOS 5.10
Thu Dec 27 10:33:04 2007 Property CPUType
Thu Dec 27 10:33:04 2007 Value sun4v
Thu Dec 27 10:33:04 2007 Property MachineCategory
Thu Dec 27 10:33:04 2007 Value SPARC
Thu Dec 27 10:33:04 2007 Property OpSysBits
Thu Dec 27 10:33:04 2007 Value 64
Thu Dec 27 10:33:04 2007 Property NumberOfCPUs
Thu Dec 27 10:33:04 2007 Value 32
Thu Dec 27 10:33:04 2007 Property CPURate
Thu Dec 27 10:33:04 2007 Value 1200
Thu Dec 27 10:33:04 2007 Property PhysicalRAMInMB
Thu Dec 27 10:33:04 2007 Value 65528
Thu Dec 27 10:33:04 2007 Property VirtualRAMInMB
Thu Dec 27 10:33:04 2007 Value 87224
Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
Thu Dec 27 10:33:04 2007 HTTP trace: false
Thu Dec 27 10:33:04 2007 Data trace: false
Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
Thu Dec 27 10:33:04 2007 *** Start SLD Registration ***
Thu Dec 27 10:33:04 2007 Used URL: http://hostname01:50000/sld/ds
Thu Dec 27 10:33:04 2007 HTTP open status: true - NI RC=1
Thu Dec 27 10:33:04 2007 HTTP send successful.
Thu Dec 27 10:33:04 2007 Return code: 401 --- Return message: (Unauthorized)
Thu Dec 27 10:33:04 2007 HTTP response: Failure. HTTP status code: 401
Thu Dec 27 10:33:04 2007 *** End SLD Registration ***
Thu Dec 27 10:33:04 2007 Data send status: false
Consequently SLD is not updated with TREX information. Using IE I can go to
the url http://hostname01:50000/sld/ds , get popup asking for
credentials (we log in using SLDDSUSER account - w/ Basis Admin level
auth.), and we receive: Page Cannot be displayed (HTTP 400 - Bad Request
Internet Explorer ).
If we go to http://hostname01:50000/sld and login with the same
account (SLDDSUSER) we see the full SLD Toolset.
Edited by: Patrick Riggins on Dec 27, 2007 6:06 PM

UPDATE:
We were able to work through and
resolve the error we initially posted in this Thread. Now we run sldreg
and all looks good; however, we are seeing nothing in SLD (on our XI
System) even after stop/restart of SLD Server:
Steps for the Reconstruction
1. Generate SLD Configuration Files:
sldreg -usekeyfile -configure /usr/sap/TXD/TRX00/slddest.cfg
2. Copied files to Global SLD
/sapmnt/TXD/global
3. Run command to transfer data to SLD:
saposcol -b | sldreg -user <user acct> -pass <password> -host
<hostname> -port <port #> -datatrace -httptrace -
logfile /usr/sap/TXD/TRX00/sld_reg.log -stdin
Looks successful:
Thu Dec 27 20:31:06 2007 HTTP body length: 0 --- HTTP body: empty
Thu Dec 27 20:31:06 2007 Return code: 200 --- Return message: (OK)
Thu Dec 27 20:31:06 2007 HTTP response: Success. HTTP status code: 200
Thu Dec 27 20:31:06 2007 *** End SLD Registration ***
Thu Dec 27 20:31:06 2007 Data send status: true
However in SLD , under content maintenance selecting "All With
Instances" in the dropdown list and "Class" , no TREX Services showing.
And no technical system showing for TXD (TREX System)

Post installation steps for PI 7.0

Hi,
Can anybody send me the Post installation steps for PI 7.0?
Thanks in advance..
~Kumar

Hello,
 
We did PI Installation recently and version is 7.1
 
Steps are as under...
 
 1. Basic PI installation
 2. System checks after basic installation
 a. SM50
 b. SM21
 c. ST22
 d. SM12
 e. SM13
 f. SM37
 3. Unlock the 001 client for cross-client changes temporarily and set system timezone (STZAC)
 4. Change 001 client settings back to no changes allowed.
 5. Create BASIS team member accounts in ABAP Stack and assign SAP_ALL.
 6. Set directory permission for \usr\sap\trans directory on Transport Domain Controller system.
 7. Import profiles (RZ10)
 8. Add the 4 following entries in to the instance profile and restart instance(RZ10)
 a. DIR_TRANS =
hostname.domain.ext\sapmnt\trans
 b. icm/host_name_full = hostname.domain.ext
 c. login/system_client = 100
 d. icm/server_port_0 = PROT=HTTP,PORT=5<sysno>00,TIMEOUT=1800,PROCTTIMEOUT=1800 {SAP Note 1107808}
 9. Configure TMS in transport domain controller{PI DEV} (STMS)
 a. Add virtual system
 b. STMS in newly installed system and configure proper transport domain
 c. In domain controller approve the new system (STMS -> SAP system -> Approve)
 10. Get maintenance certificate and SAP license from service marketplace and apply in to the new system {ABAP and JAVA} (slicense and NWA)
 11. Kernel Update JSPM
 a. JSPM update
 b. Kernel update
 c. BC-FES-IGS update
 12. Support pack installation ABAP
 a. SPAM update
 b. Support packs update
 13. Support pack installation JAVA
 a. Apply support pack stack
 b. Apply support pack patches
 i. After JVM installation Error occurs apply MS windows KB973544 {SAP Note 1367498}
 c. Restart JSPM and continue patch installation
 14. Client copy from client 001 to X00 using profile SAP_ALL
 15. Create logical system and assign it to new client (SALE)
 16. Change UME target in JAVA to client X00.
 a. Enter URL as http://hostname.domain.ext:port/nwa
 b. Management -> Infrastructure -> Destination
 c. Logon data TAB change client to X00
 d. Restart JAVA Instance
 17. Create following users
 a. PIAFUSER, PIRWBUSER, PIISUSER, PIDIRUSER, PIREPUSER and PIAPPLUSER on the target SLD and new system manually and assign role/group SAP_SLD_CONFIGURATOR to them. {SAP Note 1309239}
 b. PISUPER in new system and assign appropriate roles in ABAP and JAVA
 c. SLD_DS_<SID> and SLD_CL_<SID> on target SLD {Use source system master password}
 d. JCoRFC_<SID> in new system
 e. Sapadm user in new system
 18. Assign roles and groups to BASIS team on JAVA Stack
 19. Create PUBLIC logon group (SMLG)
 20. Configure SLD collector job as sapadm (RZ70)
 21. Run Configuration Wizard
 a. Enter URL as http://hostname.domain.ext:port/nwa
 b. Configuration management -> Scenarios -> Configuration Wizard
 c. Select Initial Configuration and click Start.
 22. Create the JCoRFC connection.
 a. Enter URL as http://hostname.domain.ext:port
 b. Web Dynpro -> Content administrator -> Maintain JCo destination
 c. Fill in information for the following 4 entries using client X00 and JCoRFC_<SID> as the user {Make sure you note the distinction between Metadata and Model destinations when you are creating the destination}
 i. WD_ALV_METADATA_DEST
 ii. WD_ALV_MODELDATA_DEST
 iii. WD_MODELDATA_DEST
 iv. WD_RFC_METADATA_DEST
(Use dictionary Meta Data for the Metadata connections, use Application Data for the Model Data connections.)
(Use the master password for EXQ)
 23. Repeat for the remaining 3 JCo RFC destinations.
 24. Run PI Full Qualified Host Name Wizard {SAP Note: 1320707}{Make sure you check the host names for integration server and SLD}
 25. Create RFC destination in to ERP target system (SM59)
 a. Give Name PI_INTEGRATIONSERVER
 b. Connection type H
 c. In Technical settings TAB provide
 i. Target host = hostname.domain.ext
 ii. Path Prefix = /sap/xi/engine/?type=entry
 iii. User information is blank
 26. Setting SXMB_ADM ERP target system
 a. Open Integration engine configuration
 b. Goto -> Change Global Configuration Data
 c. Role of Business system = Application System {This is optional}
 d. Provide RFC destination name in Corresponding Integ. Server = dest://PI_INTEGRATIONSERVER
 27. Schedule Standard Jobs as SAPADM in client X00.
 28. SICF service to activate
 a. /default_host/sap/public/bc/pictograms
 b. /default_host/sap/public/bc/webicons
 c. /default_host/sap/public/bc/its/designs
 d. /default_host/sap/public/bc/workflow
 e. /default_host/sap/bc/ccms
 f. /default_host/sap/bc/webdynpro/sap/CTS_BROWSER
 g. /default_host/sap/bc/webflow
 h. /default_host/sap/bc/workflow
 i. /default_host/sap/bc/workflow_xml
 j. /default_host/sap/bc/xmb
 k. /default_host/sap/bc/ping
 l. /default_host/sap/xi/wsdl_sr
 m. /default_host/sap/xi/wsdl_url
 n. /sap/bc/webdynpro/sap/appl_soap_management
 29. Adjusting JNLP Heap size
 a. Open the Exchange profile through the link u201Cadministrationu201D from the web page of the Process Integration tools.
 b. Under the folder u201CIntegration Builderu201D click on the variable u201Ccom.sap.aii.ib.clientjnlp.j2se.maxheapsizeu201D
 c. Value = 1024
 d. Save the change and restart the J2EE instance of PI so that the new value can take effect.
 30. Create RFC destination for Advanced Adaptor Engine in sender ERP system(SM59)
 a. RFC Destination = AAE_<SID>
 b. Connection type = G
 c. Target Host = Host Name of AAE Server {PI Server}
 d. Service No. u2013 HTTP port number of AAE Server
 e. Path Prefix = /XISOAPAdepter/MessageServlet?ximessage=true
 f. Under Logon & Security use PIAPPLUSER with PI target systemsu2019 master password.
 31. Create RFC destination <SID>_ALE in ERP Source system with user ERQALEUSER {Make sure you have this user created in new installed system}
 32. Install External Driver Configuration in Process Integration 7.1 Using JSPM {SAP NOTE: 1138877}
 
Please let me know if I am missing anything there...
 
Cheers,
 
Yogesh

Please send detail steps for uploading legacy data

Hi friends,
please send detail steps for uploading legacy data
Thanking u in advance,
Diwa.

HI U CAN USE LSMW TO UPLOAD LEGACY DATA
LSMW is used for migrating data from a legacy system to SAP system, or from one SAP system to another.
Apart from standard batch/direct input and recordings, BAPI and IDocs are available as additional import methods for processing the legacy data.
The LSMW comprises the following main steps:
Read data (legacy data in spreadsheet tables and/or sequential files).
Convert data (from the source into the target format).
Import data (to the database used by the R/3 application.
But, before these steps, you need to perform following steps :
Define source structure : structure of data in the source file.
Define target structure : structure of SAP that receives data.
Field mapping: Mapping between the source and target structure with conversions, if any.
Specify file: location of the source file
Of all the methods used for data migration like BDC, LSMW , Call Transaction which one is used most of the time?
How is the decision made which method should be followed? What is the procedure followed for this analysis?
All the 3 methods are used to migrate data. Selection of these methods depends on the scenario, amount of data need to transfer. LSMW is a ready tool provided by SAP and you have to follow some 17 steps to migrate master data. While in BDCs Session method is the better choice because of some advantages over call transaction. But call transaction is also very useful to do immediate updation of small amout of data. (In call transaction developer has to handle errors).
SO Bottom line is make choice of these methods based of real time requirements.
These methods are chosen completely based on situation you are in. Direct input method is not available for all scenario, else, they are the simplest ones. In batch input method ,you need to do recording for the transaction concerned. Similarly, IDoc, and BAPI are there, and use of these need to be decided based on the requirement.
Try to go through the some material on these four methods, and implement them. You will then have a fair idea about when to use which.
LSMW Steps For Data Migration
How to develop a lsmw for data migration for va01 or xk01 transaction?
You can create lsmw for data migration as follows (using session method):
Example for xk01 (create vendor)
Initially there will be 20 steps but after processing 1 step it will reduced to 14 for session method.
1. TCode : LSMW.
2. Enter Project name, sub project name and object name.
    Execute.
3. Maintain object attributes.
    Execute
    select Batch Input recording
    goto->Recording overview
    create
    recording name.
    enter transaction code.
    start recording
    do recording as per ur choice.
    save + back.
    enter recording name in lsmw screen.
    save + back
Now there will be 14 steps.
2. MAINTAIN SOURCE STRUCTURES.
    Here you have to enter the name of internal table.
    display change
    create
    save + back
3. MAINTAIN SOURCE FIELDS.
    display change
    select structure
    source_fields->copy fields.
    a dialogue window will come .
    select -> from data file
    apply source fields
    enter No. of fields
    length of fields
    attach file
    save + back
4. MAINTAIN STRUCTURE RELATIONS
    display change
    save + back
5. MAINTAN FIELD MAPPING & CONVERSION RULE
    display change
    click on source field, select exact field from structue and enter
    repeat these steps for all fields.
    save+back
6. MAINTAIN FIXED VALUES, TRANSACTION, USER DEFINED
    execute
    save + back
7. SPECIFY FILES.
    display change
    click on legacy data
    attah flat file
    give description
    select tabulatore
    enter
    save + back
8. ASSIGN FILE
    execute
    display change
    save + back
9. IMPORT DATA.
    execute
    display change
    save + back
10. DISPLAY IMPORTED DATA
      enter ok, it willl show records only.
      back
11. CONVERT DATA
      execute
      display change
      save + back
12. DISPLAY CONVERTED DATA
      execute
      display change
      save + back
13. CREATE BATCH INPUT SESSION
      tick keep batch input folder
      F8
      back
14. RUN BATCH INPUT SESSION.
      sm35 will come
      Object name will be shown here
      select object & process

Adobe Premiere Elements Won't Start A New Project?

When I open up Premiere Elements and try to start a new project, all it shows is a black and purple line, then it just stops. I have already tried updating QuickTime, Windows 7, Nvidia Drivers, and Uninstalling and then Reinstalling Premiere elements. I am running it on a PC that has an AMD FX(tm)-6300 Six Core Proccessor, 8 GB of RAM, a Nvidia G-Force GTX 650, and i installed the program on a secondary hard drive with 761 GB of free space.

xXFIRE
What is this "secondary hard drive" on which you originally installed Premiere Elements 12? Internal or external and how formatted NTSC or FAT32?
I do not see where anyone has asked about "Scratch Disks" as they relate to your issues?
Please refer to Edit Menu/Preferences/Scratch Disks...
a. Where are the scratch disks directed and how much free hard drive space is at that location?
b. Do you have all the scratch disks categories directed to the same place? If not, do so and make sure there is lots of free hard drive space where you are pointing them to.
Please look for pile ups of preview files in the Adobe Premiere Elements Preview Files Folder and pile ups of conformed audio in the Media Cache Folder. Both these folders by default are in Documents/Adobe/Premiere Elements/12.0.
Please go to Edit Menu/Preferences/Media and hit the Clean button in the Media Cache Database in that area.
As for the matter of where Premiere Elements program should be installed. Interesting question and some interesting answers. Back in a 2010 thread here on this type of subject, Akshat B (Adobe Staff) wrote
Yes you can install Premiere Elements on any other drive. For that you need to follow these steps:
1. Uninstall current copy of Premiere Elements.
2. Start the installer of Premiere ELements.
3. Choose a location on d:\ drive after choosing the default TV format.
Please keep in mind, even if you select d: drive as the install location some amount of data will get copied to C: drive.
-Akshat
http://forums.adobe.com/message/3284673
Is your Local Disc C, a SSD drive? Why is there so little free space on your Local Disc C?
More later.
Looking forward to your follow up?
ATR

Steps for Enhancing Profit center in FI AP-AR

Dear All,
Kindly provide me the steps for enhancing Profit Center in FI AP-AR
Regards,
Sahil

hi sahil,
Stesp to append the filed
-- go to-> RSA6 selece ur datasource & click on the push button enhance extract structure
-- By default the system will propose a extract structure name which starts with ZA accept it.
-- In the next screen enter the field name & componant type, make sure that the field name will start with ZZ.
-- Save it and activate the extract structure
Next goto RSA6 --select the data source that you want to enhance . in order to populate the data to the filed that we had appended to the structure we need to write ABAP code
to write the ABAP code to populate the data to the filed that are appended follow the below steps
1) GOTO Tcode: CMOD
2) Select your project you are working
3) sap enhancement RSAP0001.its provided by SAP
4) Choose the exit which is called when the data is extracted.
EXIT_SAPLRSAP_001 - Transaction data
EXIT_SAPLRSAP_002 - Attribute
EXIT_SAPLRSAP_003 - Texts
EXIT_SAPLRSAP_001 - hierarchies
5) it will take you to ABAP editor screen where you will find the option include ZXRSAU01--double click on it it will take you to ABAP editor screen.
6) below is sample code
data : l_s_ds like your data source extract structure,
l_vbkum like mbew-vbkum,
l_meins like mara-meins,
l_tabix like sy-tabix.
case i_datasource.
WHEN '0FI_AP_3'. "Vendors: Line Items
    LOOP AT C_T_DATA INTO L_0FI_AP_3.
      L_TABIX = SY-TABIX .
      IF NOT L_0FI_AP_3-BSCHL = '25'.
        SELECT SINGLE CHECT FROM PAYR INTO L_CHECT
                WHERE VBLNR = L_0FI_AP_3-AUGBL
                AND   ZALDT = L_0FI_AP_3-AUGDT.
        IF SY-SUBRC = 0.
          L_0FI_AP_3-ZZCHECT = L_CHECT.
        ENDIF.
      ENDIF.
      SELECT SEGMENT FROM FAGLFLEXA INTO L_SEGMENT WHERE BELNR = L_0FI_AP_3-BELNR
                                                   AND SEGMENT NE ' '.
      ENDSELECT.
      L_0FI_AP_3-ZZSEGMENT = L_SEGMENT.
      MODIFY C_T_DATA FROM L_0FI_AP_3 INDEX L_TABIX.
      CLEAR : L_CHECT, L_SEGMENT.
    ENDLOOP.
endcase.
When ever the data source is used to extract the data the when statement will be executed. so that the appended filed will be populated with data.
Check the below links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c035c402-3d1a-2d10-4380-af8f26b5026f?quicklink=index&overridelayout=true
Hope this helps
Regards
KP

SLD Steps for starting a XI project

Similar Messages

Maybe you are looking for