Slider Not Working

Hi All,
I decided to move the new BC AGency template from BC Gurus over to our website, there are some features which we will utilise and it will be customised.
I carefully moved everything over, replaced the webapp ids, menu ids etc etc.
I have two issues, the slider does not seem to be working at all, all the images appear on the page.
The form in the footer is appearing underneath my blog, i copied and pasted the form and then changed the IDs for the form.
Here is the link: http://www.6sm.co.uk/1-template-test
If somebody could shed some light i would be very greatful.
Many Thanks
Asad

Hi All
Apologies for the late reply. I managed to fix it after going through some of the code. I have noticed that BC changes the code for the orbit slider when copying trmplates across so you have to make shanges in dreamweaver and then upload the template.
All good and working now
Thanks for your replies though.

Similar Messages

Slider not working around 50% of the time.

Hello,
Slider not working around 50% of the time when I get a call. I hit the sleep button and home button several times and then it works.
I've done the soft reset several times. I've restored settings completely 2 times.
the screen is clean, my hands are clean, the wifi is off, the phone has not been dropped, it only happens when receiving a call and never happens when I'm just turing it on to access the menu. Bluetooth is off as well.
Any ideas?

this happened to me a week or so after buying my iPhone. Fixed it with a reboot... Simul holding home and on/off until apple appears on the screen . Been working for axweek ok now.

New ipod touch slider not working

I just got a new ipod touch 5 hours ago and the slid to un lock is not working. I have tried restoring it and it does nothing to help. Do i need to take it to the store or is there something i cad do to fix this problem?

Are you swiping your finger all the way from left to right? If you don't swipe all the way, it won't work.

Zoom image slider not working correctly

I am using the {tag_largeimage,zoom,600,360} on http://meluka.worldsecuresystems.com/bedroom/bedside-cabinets/low-storage-on-castors. I want to either 1. make the slider work for the full width (600px) as at the moment the slider effect works for what looks like the deafault 150px width & then has no effect, or 2. Customize the slider width to 150px width (keeping the image at 600px wide). Does anyone know if this is possible with css/javascript & if so, can you please point me in the right direction?

I just upgraded from the original iPhone 8Gb model to the iPhone 4 32Gb model. One of the first few days after I got the phone I had this problem and couldn't accept a call from my mother. A few days ago my wife tried to call me and the same thing happened. On the same day my wife tried to call, the unlock screen was black and the slider would not unlock the phone. I could pull the slider all the way to the right side of the screen, but it would just stay there and not wake the phone. Unfortunately, my wife's uncle was standing right next to me when this happened, and he just got the Droid X, and promptly took it out and unlocked it easily while mocking me. I never had this issue on my original iPhone, and it's kind of annoying, even though it doesn't happen very often, I hate having the question of "will I be able to answer my phone this time?" in the back of my mind. Reception is great, and I can hear people soooo much better than on my original iPhone, but this unlocking issue is the thing making me irritated. Especially when I'm right next to someone holding a brand new Droid X and showing me how easy it is to answer a call.

Conditional Branching with quiz slides not working

Attempting to use conditional branches with quiz slidescauses
the other quiz slides in my presentation to not work correctly. I
am attempting to create a 'test-out' pre-quiz for a segment of
slides in the presentation. I followed the instructions to add
conditional branching per page 46 of the Breeze Presenter User
Guide to obviously no avail. Is there a simple straightfoward
manner in which someone has successfully used conditional branches
with their quiz slides in their presentation?

Hi,
I had the same issue.Apparently as of now PDF templates do not support conditional formatting for XML Publisher.
See Tim Dexter's response to my query at the bottom of this thread...
Re: Using the '%' operator in microsoft word template builder for XMLP
I could get some conditional formatting to work on the pdf template but only for the form field font,size and styles using Javascript, but I don't think there is a way to display values for the form field based on an if condition...
Lavina

Enhance Timing/Align to Slider not working

I can't get my "Enhance Timing/Align to" slider to work. It is white - not blue. Even after I perform a quantization in a MIDI track and the notes snap to grid, it won't work. From what I understand, I should be able to move the slider at this point so that I can adjust how much quantization actually happens.

Probably not many DIYers here. Check this site http://www.ifixit.com/Device/iPad
 Cheers, Tom

Continue Button on Quiz Results Slide NOT Working Properly

I'm experiencing a functionality issue with the "Continue"
button on the Quiz Results slide:
Situation 1: After initially completing the quiz, I need to
click the "Continue" button on the Quiz Results slide only once to
advance to the next (and last) slide in the quiz movie. This is
fine & works as I would expect.
Situation 2: After initially completing the quiz, if instead
I choose to review the quiz, later when I get to the Quiz Results
slide, I need to click the "Continue" button TWICE to advance to
the next (and last) slide in the quiz movie. This does NOT work as
I would expect.
Any idea why only 1 click is needed in the Situation 1 while
2 clicks are needed in Situation 2? Any way to fix Situation 2 so
that only 1 click is needed?
Thanks much!

CapManZ,
Whether the Continue button on the Quiz Results slide
requires one or two clicks is mysterious indeed. See
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1302278
for another discussion about its misbehavor.
Actually, the number of clicks required depends on how long
you wait after the Quiz Results slide appears, prior to clicking
the Continue button. In your situation 1 you probably answered
questions rather than using the skip button, so you viewed the
question slides for a while prior to arriving at results. In your
situation 2 you probably used the Skip button to zip through the
slides to return to the results screen. Try this. In situation 2,
when you get to the Quiz Results slide, instead of clicking the
Continue button, go get a cuppa joe and then see if a single click
will work. If so please let me know.
I've experimented with a Captivate 2 multiple choice quiz in
a slide show that contained only 10 questions and the Results
slide. I added a text caption with fade in and fade out enabled
(the default) to the Results slide. I found that after the caption
fades in, one click on the continue button advances the slide. So I
used the caption's appearance to help measure the timing.
In the tests below I skipped as rapidly as possible, pausing
at various slides to see how it affected the single click
threshold.
Skip all slides: 28 sec
View slide 1 for 60 sec and then skip: 28 sec
Skip to slide 5, pause 30 sec, and then skip: 13 sec
Skip to slide 10, pause 30 sec, and then skip: 2-3 sec
Answer each slide (took more than 30 sec): 2-3 sec
Skip all slides, click Continue as fast as possible: 2-3 sec
I also reduced the number of question slides in the quiz and
skipped all slides.
7 questions: 18 sec
3 questions: 7 sec
I believe the threshold value (the duration required before
clicking the Continue button advances to the next slide) is
composed of two durations which add together to determine the
threshold. The Result's slide's timeline probably sets the
threshold's lower limit. Clicks prior to 3 seconds are ignored.
Time per slide and number of slides left to go sets the upper limit
for the threshold. The slower the movement, the lower the
threshold.
Several conclusions:
This probably isn't a situation in which the first click is
ignored. Instead the first click reduces the threshold's value to
the lower limit. The second click would then typically occur after
3 additional seconds, particularly if the user is surprised that
the first click didn't work and pauses slightly. A very fast
additional click on the Continue button is ignored as well.
Long quizzes will cause more complaints about the issue
because of what you experienced. It typically takes longer to
answer the quiz than review it.
Perhaps there's a workaround that would alert the user that
the Continue button is ready for clicking. I'm thinking that since
the text caption fade-in coincides with being ready to continue, an
image or the like might do the trick. Any suggestions out there?
Humm, a better alternative might be to show some images of
snacks on the results slide background. Through suggestive selling,
the user realizes it's time for a break and clicks Continue after
returning with that cuppa joe. And the sound you hear? It's the
Captivate developers giggling if they read my conclusions. Too bad
they're mum, since some real info might make it easier to make
Captivate behave. Ah well.
Phil

Youtube channel slider not working in Win or MAC

Seen here on our client site http://www.hutchbiz.com/
It is the third set in the page slider. When viewed in Safari on either a windows based computer or a MAC the youtube breaks out of the slider and all 7 video's span across the web page broken.
It only happens in Safari. It works perfectly fine in Chrome, Firefox and IE.
I'm out of ideas here. Any help is greatly appreciated. Thank you to all in advance.
Ross

Hello Nitin and Sreekanth, Thanks for your suggestions and sorry for my delayed response. (I'm working on this project part-time.)
I have tried embedding the YouTube clip on a new slide (not one with the link on it). Actually, I was going to remove that link on the original slide once the embedded clip was up & running. (We had to check our copyright policy first, which is why we started off with the link.) Adding the interaction on a new slide made no difference; it didn't work.
I have also tried changing the timing. Actually, it was originally set to 'rest of slide' but I changed it to 'duration of animation' when the clip didn't work. Either way, it doesn't work. I have also tried checking 'synchronize with project'. I don't really know what that entails but it was worth a go. Again, no luck.
I'm adding some more screenshots FYI. The first is the dialogue box that appears when you first open the YouTube interaction widget. I clicked the 'Test' button on the right and the clip launched in the browser so at least that works! But there's something incompatible with my slides. I wonder if I am the only one to have had this problem.
Cheers, J.
Image 3:
Image 4:

Captivate 5.5 Buttons and Jump To Slide Not Working

I have a home slide where users can choose from 10 state-specific training options. There are 178 slides in the total presentation. When I open the presentation fresh a couple of the buttons work and jump to the correct state. One button jumps to a different slide than what is defined and the rest of the buttons do not work at all. If I select one of the buttons that works then return to the beginning of the presentation all the buttons work fine. The problem occurs when I open a fresh copy of the published presentation from my hard drive. The buttons are all active and there is no click box on the slide - you need to click on one of the state buttons to continue past the initial slide. I cannot understand why this is not working or why everything works fine when I return to the home slide from somewhere else in the presentation. Any help would be appreciated. Thank you.

Hi there
Buttons may seem a bit hit and miss and may be daunting with all the Active VS Inactive timeline bits and all. But I've really never known them to totally fail or be all that random.
Things to consider with Buttons.
What does the button do?
As I explained in my earlier reply, if a button is programmed to jump to a slide a lot farther down the track, and that portion of the track hasn't yet arrived from the server, this could well be an issue.
Another thing that can affect whether a button operates as you wish is if you are trying to jump to a slide that is beyond a Question slide (or a slide being treated as a Quiz slide) and your Quiz settings are configured so that each question must be answered before you may proceed. Captivate will disallow visiting a slide beyond the first unanswered question.
Sometimes a Button is configured to open a URL or a file. And it works fine during preview within Captivate, but fails after you publish. This is most often an issue with Flash Security Settings blocking the action and is described at the link below:
Click here to view
Hopefully this sheds some light on the situation.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Jump to slide not working

Hi. I'm using Captivate 3. My module is set up like this:
Slide 1: Title
Slide 2: Task Selection with buttons where users can choose which section to complete (Demo, Interactive Activity #1, 2, 3, 4, Quiz).
Slides 3-10: Demonstration
Slides 11-20: Interactive Activity #1
Slides 21-30: Interactive Activity #2
Slides 21-40: Interactive Activity #3
Slides 41-50: Interactive Activity #4
Slides 51-55: Quiz
These buttons on Slide 2 work fine:
Demo
Interactive Activity #1
These buttons on Slide 2 do not work - nothing happens when I click:
Interactive Activity #2
Interactive Activity #3
Interactive Activity #4
Quiz
I have another module set up similarly but without any user interactivity. So I think the problem is with the interactivity, but I can't figure it out.
Help please!

Hi there
Likely it's in your quiz settings. You most likely have something configured in a way that the interactive bits actually require the user to complete them before moving forward. And when that's the case, Captivate will disallow jumping to a slide beyond the bits that haven't yet been completed.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

"Jump to Slide" not working at all

Version: Captivate 4
LMS: No
Method of testing: Preview in browser
Issue:
I am creating a quiz that uses images and click boxes to assess the user's knowledge of MS Word. Some of the questions involve 2 steps, so that the user has to click one spot on the image and then another on the next image. However, if the user misses the first step, they should see the next question instead of the second step.
I've set the click-box to "jump to slide ___" but it doesn't It simply continues on to the next slide. I thought maybe the slide navigation was overruling the click box navigation, so I set it to "no action", but still no luck. I also tried setting the click box to "continue" and the slide to do the jump.
It comes down to this: I cannot get "jump to slide" to work no matter where I set it. This should be easy - using a built-in function to jump to another slide. I've been doing this since the days of Hypercard in the early 90's. Why can't this program do this simple function? My colleague and I are very confused.
Enola

Hi there
A Click Box will only jump to a slide if the user clicks the clickable area. From what you have described, you want the jump to occur if they click outside the area, no?
Note that you may assign a number of attempts. So I'm thinking you want to assign a single attempt to the Click Box. If the user clicks the clickable area, you jump to the next slide. But if they click outside the clickable area, you then want to jump to the other slide.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Jump to Slide not working correctly

I created quiz questions in Captivate (5.5) that are interspersed throughout the content and I want to to jump back to the beginning of the section that contains the relevant content for review if the user gets the question incorrect. I created custom question slides using variables and advanced actions and it seemed to work great. Now all of a sudden, the [Review] button, which appears if the user gets the question incorrect, does not work. I'm not sure what I'm doing wrong.

Thanks Lilybiri, I know this was posted a while back, but you saved me today!
My quiz scope was preventing my jump to slide from working. Essentially the quiz scope ends in your deck on the last slide that has a scorable field. Captivate 5 wasnt allowing me to jump beyond that point from eariler in the deck. Ex: My menu was on slide 4. I had a single scorable click box (for LMS SCORM reasons) on slide 75. And my last menu item was trying to jump to slide 76. I found I could not jump to anything beyond 75. I Simply moved the scorable object to slide 76 (or could have been even further out as needed), and its working again.
If you have nothing scorable, quiz scope shouldn't affect jump to, at least that's been my experience in the past. You can check using the F9 (advanced interactions) and look in the "Include in quiz" column for the YESs.

Audio Mixer. Soundtrack Volume slider not working.

I am using Premiere Elements 11 running under Windows 7, 64 bit. I was in the middle of editing the soundtrack of a slideshow (video clips combined with .jpg photos). In Audio Mixer the Soundtrack volume slider stopped working. It would not move up or down. What have I done to cause this?

John,
Sounds like Track Keyframes have already been added with Audio Mixer.
Now, you can easily overwrite those, but only with automation in Audio Mixer. With Audio Mixer open, just hit the Spacebar, and immediately adjust the Volume to what you want. If you do not need active Volume control, i.e. it changes over time, just hold the Volume slider in the position that you want, until playback has finished. Done, and the old Track Keyframes will have been overwritten.
If your Audio comes too close to the beginning of the Timeline, for you to comfortably begin to adjust it, after hitting playback, just create about a 02 sec. Clip of Black Video (New Icon), and place that at the very beginning of the Timeline. That will also create 02 sec. of silence (often termed Black Audio, by some), and give you plenty of time to get up to the Volume slider. Personally, I start every Timeline with 02 sec. of Black Video, then do a Dip-to-Black Transition to "fade in" my Video. [There is another reason, but it does not apply in PrE. As I create most Projects with DD 5.1 SS Audio, some DVD players take a moment to lock onto the Audio Stream, and that gives them time to do so, without affecting the Audio that the viewer hears.]
One other method, to change things fairly easily, would be to Select ALL Audio Clips on that Track, then just drag them to another, free Audio Track, without Track Keyframes.
This method brings back the ability to use the other control in Audio Mixe - a static adjustment, where one just sets the Volume slider to the desired level, and it stays there.
A tip, that might be useful, is to go to Edit>Preferences>Audio, and set Minimal Time Interval Thinning up to about 100ms. This creates fewer Track Keyframes, and I find it still more than adequate for smooth adjustments in Volume and Balance. If there is any interval, that is too abrupt, I just manually change the Interpolation of the Keyframe from Linear (the default) to say Bezier.
Good luck, and hope that this helps,
Hunt

Aperture 2.1.4 with Snow Leopard Filmstrip Slider Not Working

Hi all,
Not sure which one caused the problem the upgrade to Snow Leopard or Aperture 2.1.4 but here is my issue.
In Browser and Viewer mode with the browser set to Filmstrip I am not able to use either the arrows or the slider to scroll through the images in my projects. Sliding the bar over to the left or right just resets back to where it was. Click on the arrows to scroll left or right does nothing. If I switch to Grid orList view they work as expected. Anyone else seeing this issue ?? Thanks

Updated to snow leopard and had the same problem that when the thumbnails where placed on the bottom I could only scroll left or right when no picture was marked... so I placed the thumbnails to the left side and scrolling worked normally even with a a marked picture...I also had bad color sync problems and switching screens would cause my windows to become almost black and unreadable..... I reinstalled my Leopard clone drive shortly there after... oh well... it took a while before leopard was ready for professional use.... I didn't really expect Snow leopard to be different... I will check back in at 10.6.4 or so LOL

Volume slider not working in ipod app

Here's an odd one - since the last update, occassionally with headphones plugged in the slider in the ipod app won't work. I can slide it, but then it goes back to max. The physical vol buttons still work, but the change isn't reflected in the slider. Anybody else see this?

Yes, I have seen this quite a bit. There are times when I am listening to music on the iPod app, when I try to move the volume slider one way, it doesn't want to move. It will move a little but not freely as to where I want it to go. To correct this, I just do a reset with both buttons. Not sure on the cause of the problem, but the reset makes the problem go away.

Volume Slider not working in DV6-2150US

I have HP Pavilion Notebook DV6-2150US, Win 7. Just discovered a few days ago that the volume slider and quick launch mute button stopped working. I searched the old posts but don't know if this relates to other issues mentioned.

Hi,
Perform a Hard Reset:
1. Disconnect all peripheral devices and remove all USB devices and media cards.
2. Disconnect the AC power adapter, remove the battery, and then press and hold the power button for at least 1 minute.
3. Reconnect the AC power adapter (do not connect the battery), press the Power button.
Check is this issue solved or not.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Slider Not Working

Similar Messages

Maybe you are looking for