Slow iView Creation

When creating a new iView in the Content Administration -> Portal Content tab, going from step1 (source type) to step2 (page creation) is very slow. The time to load the step2 page can easily run 30 minutes or more. Normally this occurs on the first time creating an iView after entering the Portal Content tab.
Any ideas on how to speed this up?

Hello,
did you find any solution to this problem? Since a few days, we experience the same. I think it has something to do with LDAP, since the only change that happened in the last days is that we "portal-enabled" around 2500 users in our active directory.
I would really appreciate any help with this issue... Thanks!
Regards,
Markus

Similar Messages

Portal Installed - Slow iView creation etc

Hi,
We have just completed the installation of the production EP 7 (2004s) on a new blade server.
Config
4 Swap Drives of 5GB each
OS - 2003 Server standard edition SP1 on C Drive (12GB)
EP instance installed on a separate netapps drive (40GB)
*4GB RAM
In creating a simple new iView it takes 3-4 minutes.
What could be the reason? Is there a mechanism to improve performance?
In our previous portal implementation (EP 6) the iView creation etc is very fast. (with a hardware configuration inferior to the one specified above)
Any advice would be highly appreciated,
Thanks and Regards,
Antony.

Hi,
Nope actually, we are still encountering this problem. But there is a workaround. Say you have created an iview, you can copy such iview and change the relevant parameters later including the ID, name and all other particulars in order to create new iviews rather than creating new iviews altogether through the wizard.
The copying activity takes just a couple of seconds.
Hope this helps..
Antony.
P.S. : Reward points would be appreciated.

PAR file missing in PAR selection list during iView creation

Hi Gurus
I created a jsp file and exported it through NWDS export option. But i dont get this par while iView creation. Its present when i searched in the support desk . Can anybody tell me the steps how to create a simple jsp in NWDS and test the same in Potal as iViews.
Thanks in advance

Hi,
Use NWDS wizards:
1) File -> Mew Project -> Portal Application -> Create a Portal Application Project
2) Right click on the project you created -> New -> Other -> Portal Application Project -> Create a new Portal Application Object
3) Select Portal Component -> JSPDynPage
4) Write your code ...
5) Deploy the par file & create iview from it.
Omri

WD Java iView Creation Question/Issue - CE 7.1 EHP 1 Trial

Hi all,
Im posting this question here seeing as that the issue has arrised on an installation of the AS JAVA and EP shipped with CE 7.1 EHP1 Trial.
When attempting to create an iView for a deployed custom WD Java app on the trial Portal I am taken straight to the iView template selection without being given the options for iView creation( ie. create from template, portal component or WD Java app). Is this by design ( WD Java iView creation has changed from previous Portal versions or is limited in Trial installation), is this an issue with the components shipped with the Trial or an issue on my installation only?
Currently my only solution for deploying WD java content is to copy the actual application and paste it as Portal content which then creates a WD Proxy page with a single WD Proxy iView (that of the copy pasted WD app). This is fine for single app scenarios but becomes an issue with multiple apps on one page and drag and relate scenarios.
Kind regards,
Willem.

Hi Williem
Please check the SAP CE 7.1 EHP1 documentation for more information.
[CE 7.1 documentation|http://help.sap.com/saphelp_nwce711/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm]
[CE 7.1 iViews |http://help.sap.com/saphelp_nwce711/helpdata/en/f5/eb51590e6a11d7b84900047582c9f7/frameset.htm]
Hope this will helps you.
Thanks
Arun Jaiswal

How to use Application Integrator for iView Creation

Hi all
any one can help me how to create an iView(webshop b2b iview) by using the Application integrator in portal
Regards
sunil

1) creating URL ivew , for that you can refer this
URL iView Creation
2) You can directly deploy your .net project from the Visual Studio itself(sound's amazing right!!). SAP have provided a add-on to deploy directly from VS 2003/2005.
For that you need
SAP Portal Add-in 2.5 for Visual Studio 2005 - Hotfix 1.exe
SAP Portal Runtime 2.5 for Microsoft .NET - Hotfix 1.exe

Slow projector creation

I am creating a projector for a large application (85MB). The
creation of the projector is far too slow. This application would
usually take 1hr(max). It is now taking 6-8hrs with my usual
settings and very little changed from the previous version. Any
help?
Kind regards,
Duncan

Xposure Interactive wrote:
> I am creating a projector for a large application
(85MB). The creation of the
> projector is far too slow. This application would
usually take 1hr(max). It is
> now taking 6-8hrs with my usual settings and very little
changed from the
> previous version. Any help?
> Kind regards,
> Duncan
may be too later for this project but, for the next one you
can split it
into several movies. easier to develop/debug/maintain
to solve this one, you can use a stub projector that calls
your big
movie so you'll only need to protect it when finished

IView Creation Based on available par file in Net Weaver

Dear All,
We Have Developed iViews based on par file creation in EP5.
We have used HTMLB tag libariries and used JCO to Call the RFC enabled function modules and BAPIs from ABAP..
but now we want to migrate the all our iviews which are running successfully in EP5 to Netweaver Component of EP6.
we have got netweaver installed but we were not able to find how to upload par file and create iView in Netweaver EP6...
in EP5 we have simple procedure to create iViews .. we will login as a administrator and there is an option for parupload under content administartion ... we will upload par files and create iviews but we are not able to find the same and simple procedure in Netweaver EP6
we have been struggling for several days and exploring netweaver EP6 documentation..
can any one throw some loght on it how to create iviews based on available par files in EP5..
please provide me detailed explanation or steps or any clear cut document to create iViews in EP6 of netweaver component. your help would be appreciated to great extent
Thanks and Regards
Prasad.Yedlapalli

Hi Prasad!
If u want to Create a iview from the par file means Goto Content administration > Portal Content > Right Click Create a floder.After Creation of Folder.
Right Click on Folder > Click on iview then select the following option
>> Portal component - create an iView from a portal component contained in a deployed portal archive (PAR)
then Select the par file , then fill general iview properties and finally click finish.
If you want to upload into portal, then u follow the below Navigation.
After u deployed ur Application par file from NWDS.
Open the Portal Goto System Administartion > Support > Click on Portal Runtime >Administration Console, then Browse the Par file and click on upload.
Next time onwards u can able to see ur par file in the PAR file list , while creating the iview from the PAR file.
Thanks & Regards
Ganesh
(Points are always Welcome)

Slow user creation when an organization has approvers

Hello everybody,
Just before a month ago, I started having performance problems when I had to deal with user creation, edit and delete. Specially the user creation was extremely slow ( 7 minutes !!! ).
This "little" latency occurs only when I create users in organizations that have approvers. if there are no approvers then there's no latency.
By examining the machine perfomance at the O/S level the machine was idle.
I running idm 7.1 installed in solaris 10 with mysql 4 backened.
Any oppinion why this latency occur ?

Login to portal...
Navigate to User Admin -> Identity Management ...
search for your user...and select Account information...
there you will get "Date of Account Creation:"
Alternatively login to :
http://<host>:<port>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
If somebody can let us know...how to find "who created the user"...this will be informative for me as well......

Slow table creation after upgrade from 10.2.0.3 to 11.2.0.1 using DBUA

I've recently completed a database upgrade from 10.2.0.3 to 11.2.0.1 using the DBUA.
I've since encountered a slowdown when running a script which drops and recreates a series of ~250 tables. The script normally runs in around 19 seconds. After the upgrade, the script requires ~2 minutes to run.
By chance has anyone encountered something similar?
The problem may be related to the behavior of an "after CREATE on schema" trigger which grants select privileges to a role through the use of a dbms_job call; between 10g and the database that was upgraded from 10G to 11g. Currently researching this angle.
I will be using the following table creation DDL for this abbreviated test case:
create table ALLIANCE (
   ALLIANCEID           NUMBER(10)                      not null,
   NAME                 VARCHAR2(40)                    not null,
   CREATION_DATE        DATE,
   constraint PK_ALLIANCE primary key (ALLIANCEID)
           using index
       tablespace LIVE_INDEX
tablespace LIVE_DATA;When calling the above DDL, an "after CREATE on schema" trigger is fired which schedules a job to immediately run to grant select privilege to a role for the table which was just created:
create or replace
trigger select_grant
after CREATE on schema
declare
    l_str varchar2(255);
    l_job number;
begin
    if ( ora_dict_obj_type = 'TABLE' ) then
        l_str := 'execute immediate "grant select on ' ||
                                     ora_dict_obj_name ||
                                    ' to select_role";';
        dbms_job.submit( l_job, replace(l_str,'"','''') );
    end if;
end;
{code}
Below I've included data on two separate test runs. The first is on the upgraded database and includes optimizer parameters and an abbreviated TKPROF. I've also, included the offending sys generate SQL which is not issued when the same test is run on a 10g environment that has been set up with a similar test case. The 10g test run's TKPROF is also included below.
The version of the database is 11.2.0.1.
These are the parameters relevant to the optimizer for the test run on the upgraded 11g SID:
{code}
SQL> show parameter optimizer
NAME                                 TYPE        VALUE
optimizer_capture_sql_plan_baselines boolean     FALSE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      11.2.0.1
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      ALL_ROWS
optimizer_secure_view_merging        boolean     TRUE
optimizer_use_invisible_indexes      boolean     FALSE
optimizer_use_pending_statistics     boolean     FALSE
optimizer_use_sql_plan_baselines     boolean     TRUE
SQL> show parameter db_file_multi
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     8
SQL> show parameter db_block_size
NAME                                 TYPE        VALUE
db_block_size                        integer     8192
SQL> show parameter cursor_sharing
NAME                                 TYPE        VALUE
cursor_sharing                       string      EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME                PNAME                     PVAL1 PVAL2
SYSSTATS_INFO        STATUS                          COMPLETED
SYSSTATS_INFO        DSTART                          03-11-2010 16:33
SYSSTATS_INFO        DSTOP                           03-11-2010 17:03
SYSSTATS_INFO        FLAGS                         0
SYSSTATS_MAIN        CPUSPEEDNW           713.978495
SYSSTATS_MAIN        IOSEEKTIM                    10
SYSSTATS_MAIN        IOTFRSPEED                 4096
SYSSTATS_MAIN        SREADTIM               1565.746
SYSSTATS_MAIN        MREADTIM
SYSSTATS_MAIN        CPUSPEED                   2310
SYSSTATS_MAIN        MBRC
SYSSTATS_MAIN        MAXTHR
SYSSTATS_MAIN        SLAVETHR
13 rows selected.
{code}
Output from TKPROF on the 11g SID:
{code}
create table ALLIANCE (
   ALLIANCEID           NUMBER(10)                      not null,
   NAME                 VARCHAR2(40)                    not null,
   CREATION_DATE        DATE,
   constraint PK_ALLIANCE primary key (ALLIANCEID)
           using index
       tablespace LIVE_INDEX
tablespace LIVE_DATA
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          4           0
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.00       0.00          0          0          4           0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 324
{code}
... large section omitted ...
Here is the performance hit portion of the TKPROF on the 11g SID:
{code}
SQL ID: fsbqktj5vw6n9
Plan Hash: 1443566277
select next_run_date, obj#, run_job, sch_job
from
(select decode(bitand(a.flags, 16384), 0, a.next_run_date,
a.last_enabled_time) next_run_date,       a.obj# obj#,
decode(bitand(a.flags, 16384), 0, 0, 1) run_job, a.sch_job sch_job from
(select p.obj# obj#, p.flags flags, p.next_run_date next_run_date,
p.job_status job_status, p.class_oid class_oid,      p.last_enabled_time
last_enabled_time, p.instance_id instance_id,      1 sch_job   from
sys.scheduler$_job p   where bitand(p.job_status, 3) = 1    and
((bitand(p.flags, 134217728 + 268435456) = 0) or
(bitand(p.job_status, 1024) <> 0))    and bitand(p.flags, 4096) = 0    and
p.instance_id is NULL    and (p.class_oid is null      or (p.class_oid is
not null      and p.class_oid in (select b.obj# from sys.scheduler$_class b
                           where b.affinity is null)))   UNION ALL   select
q.obj#, q.flags, q.next_run_date, q.job_status, q.class_oid,
q.last_enabled_time, q.instance_id, 1   from sys.scheduler$_lightweight_job
q   where bitand(q.job_status, 3) = 1    and ((bitand(q.flags, 134217728 +
268435456) = 0) or         (bitand(q.job_status, 1024) <> 0))    and
bitand(q.flags, 4096) = 0    and q.instance_id is NULL    and (q.class_oid
is null      or (q.class_oid is not null      and q.class_oid in (select
c.obj# from sys.scheduler$_class c                          where
c.affinity is null)))   UNION ALL   select j.job, 0,
from_tz(cast(j.next_date as timestamp),      to_char(systimestamp,'TZH:TZM')
), 1, NULL,      from_tz(cast(j.next_date as timestamp),
to_char(systimestamp,'TZH:TZM')),     NULL, 0   from sys.job$ j   where
(j.field1 is null or j.field1 = 0)    and j.this_date is null) a   order by
1)   where rownum = 1
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          0           0
Fetch        1      0.47       0.47          0       9384          0           1
total        3      0.48       0.48          0       9384          0           1
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: SYS   (recursive depth: 1)
Rows     Row Source Operation
      1 COUNT STOPKEY (cr=9384 pr=0 pw=0 time=0 us)
      1   VIEW (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=6615380 card=194570)
      1    SORT ORDER BY STOPKEY (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=11479630 card=194570)
194790     VIEW (cr=9384 pr=0 pw=0 time=537269 us cost=2563 size=11479630 card=194570)
194790      UNION-ALL (cr=9384 pr=0 pw=0 time=439235 us)
    231       FILTER (cr=68 pr=0 pw=0 time=920 us)
    231        TABLE ACCESS FULL SCHEDULER$_JOB (cr=66 pr=0 pw=0 time=690 us cost=19 size=13157 card=223)
      1        TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=2 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
      1         INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
      0       FILTER (cr=3 pr=0 pw=0 time=0 us)
      0        TABLE ACCESS FULL SCHEDULER$_LIGHTWEIGHT_JOB (cr=3 pr=0 pw=0 time=0 us cost=2 size=95 card=1)
      0        TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=0 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
      0         INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=0 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
194559       TABLE ACCESS FULL JOB$ (cr=9313 pr=0 pw=0 time=167294 us cost=2542 size=2529254 card=194558)
{code}
and the totals at the end of the TKPROF on the 11g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      2      0.00       0.00          0          0          4           0
Fetch        0      0.00       0.00          0          0          0           0
total        3      0.00       0.00          0          0          4           0
Misses in library cache during parse: 1
Misses in library cache during execute: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse       70      0.00       0.00          0          0          0           0
Execute     85      0.01       0.01          0         62        208          37
Fetch       49      0.48       0.49          0       9490          0          35
total      204      0.51       0.51          0       9552        208          72
Misses in library cache during parse: 5
Misses in library cache during execute: 3
   35 user SQL statements in session.
   53 internal SQL statements in session.
   88 SQL statements in session.
Trace file: 11gSID_ora_17721.trc
Trace file compatibility: 11.1.0.7
Sort options: default
       1 session in tracefile.
      35 user SQL statements in trace file.
      53 internal SQL statements in trace file.
      88 SQL statements in trace file.
      51 unique SQL statements in trace file.
    1590 lines in trace file.
      18 elapsed seconds in trace file.
{code}
The version of the database is 10.2.0.3.0.
These are the parameters relevant to the optimizer for the test run on the 10g SID:
{code}
SQL> show parameter optimizer
NAME                                 TYPE        VALUE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      10.2.0.3
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      ALL_ROWS
optimizer_secure_view_merging        boolean     TRUE
SQL> show parameter db_file_multi
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     8
SQL> show parameter db_block_size
NAME                                 TYPE        VALUE
db_block_size                        integer     8192
SQL> show parameter cursor_sharing
NAME                                 TYPE        VALUE
cursor_sharing                       string      EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME                PNAME                     PVAL1 PVAL2
SYSSTATS_INFO        STATUS                          COMPLETED
SYSSTATS_INFO        DSTART                          09-24-2007 11:09
SYSSTATS_INFO        DSTOP                           09-24-2007 11:09
SYSSTATS_INFO        FLAGS                         1
SYSSTATS_MAIN        CPUSPEEDNW           2110.16949
SYSSTATS_MAIN        IOSEEKTIM                    10
SYSSTATS_MAIN        IOTFRSPEED                 4096
SYSSTATS_MAIN        SREADTIM
SYSSTATS_MAIN        MREADTIM
SYSSTATS_MAIN        CPUSPEED
SYSSTATS_MAIN        MBRC
SYSSTATS_MAIN        MAXTHR
SYSSTATS_MAIN        SLAVETHR
13 rows selected.
{code}
Now for the TKPROF of a mirrored test environment running on a 10G SID:
{code}
create table ALLIANCE (
   ALLIANCEID           NUMBER(10)                      not null,
   NAME                 VARCHAR2(40)                    not null,
   CREATION_DATE        DATE,
   constraint PK_ALLIANCE primary key (ALLIANCEID)
           using index
       tablespace LIVE_INDEX
tablespace LIVE_DATA
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.01          0          2         16           0
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.01       0.01          0          2         16           0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 113
{code}
... large section omitted ...
Totals for the TKPROF on the 10g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.02          0          0          0           0
Execute      1      0.00       0.00          0          2         16           0
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.00       0.02          0          2         16           0
Misses in library cache during parse: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse       65      0.01       0.01          0          1         32           0
Execute     84      0.04       0.09         20         90        272          35
Fetch       88      0.00       0.10         30        281          0          64
total      237      0.07       0.21         50        372        304          99
Misses in library cache during parse: 38
Misses in library cache during execute: 32
   10 user SQL statements in session.
   76 internal SQL statements in session.
   86 SQL statements in session.
Trace file: 10gSID_ora_32003.trc
Trace file compatibility: 10.01.00
Sort options: default
       1 session in tracefile.
      10 user SQL statements in trace file.
      76 internal SQL statements in trace file.
      86 SQL statements in trace file.
      43 unique SQL statements in trace file.
     949 lines in trace file.
       0 elapsed seconds in trace file.
{code}
Edited by: user8598842 on Mar 11, 2010 5:08 PM

So while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table."

Error in Transaction iView creation.

Hi All,
I have requirement wherein i need to create a transaction iView for a particular infotype of a Transaction Code. i had entered the Tcode and system name. But the portal is showing the folowing error when i press the preview for that screen.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/ABC_Folder/education
Component Name : com.sap.portal.appintegrator.sap.Transaction
Exception in SAP Application Integrator occured: Missing Property 'ClassName' in property file for layer'Transaction/WinguiSSOLayer'..
Exception id: 09:56_14/10/08_0012_101711350
See the details for the exception ID in the log file
Can any one tell me as where could be the problem
regards,
Sai Sharan kalla

Hi,
Please check the thread
Transactions give an error message
Regards
Santosh

Issue in Iviews creation in portal

Hi,
I am working on Portal 7.01 SP3.I am facing problem in creating iviews.
When I want to create new iviews I go to "Content Administration" > Select appropriate folder under PCD > Right-click, select "New" > "iView" >
Here I get the option to select the radio button from Iview template,Portal Component and Webdynpro Java application.
But when I select the Iview template I do not get the option to select the type of iview and proceed.
After a long time I get the message "No templates to display. You are not assigned to any existing templates."
Please suggest.
Thanks,
Rajani
Edited by: Rajani Nandagiri on Sep 15, 2009 11:00 AM

Hi,
Thanks for the reply.
I have checked the permissions told by you to the templates folder.But still the problem exists.
Also when I checked the for Permissions for Appl folder from System Admin -> Permissions,there are no folders displayed.
Please suggest.
Thanks,
Rajani

Problem in Url iView creation

Hi,
Does anyone know how to resolve this problem.
We have EP. 7.0 and SRM BP 5.0 installed.
When i try to create an URLiView i got this error msg:
<b>Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application com.sap.portal.httpconnectivity.urliviews.
Exception id: 03:26_02/11/06_0044_8457250
See the details for the exception ID in the log file</b>
I can not see the log file so hope to have a hand from you!
Thank you,
Points will be rewarded for any help.....

Hi,
I have few drop down list boxes, which are displaying when I execute an url.
ex: url like http://countrystates.com and drop down list country displays 10 countries and states will be displayed base on selection of country
When I execute this with URL iView I am getting same content what I expected but after assigning this iView to page I am getting wrong content mean country dropdown size is 10 but with wrong data (same some text is displaying 10 times in dropdown)
I hope u understood the problem
Thanks

Issue in simple Iview creation

Hi Friends,
I am going to develop IView, Page, workset, Role, and assigning the Role to the user.
I created all these four and User, just I added one by one like Iview to page, page to workset, workset to Role and assigned Role to User.
Now If I open the portal with user, It is showing page not found.
Could you please help me in this.
Regards,
Lakshmi Prasad.

I have enable all Entry point for iview, workset, roles, etc. However still nothings works.
The tab of the respective role did not display at all. Standard SAP role is working. Only custom ones are not.
I have no much idea after trying to fine what's the issue.
Hoping someone could help me out.
Thanks.

Webdynpro abap iview creation error

Hi All,
I created a wdbdynpro abap application using transaction SE80, and test that application successfully.
I want to display that application in portal, for that I created a SAP webdynpro iview succesfully. but when i was preview the created iview I am getting the message like: ' Page canot be displayed'.
Could anybody help me How to resolve this?.
Regatds,
Suresh

Hi,
have a look and try options
Troubleshooting the Page cannot be displayed error in Portal.
Anybody know about 'page cannot be displayed' error?
Koti Reddy

Iview creation and images in the EP

Hi
Iam able to upload image in the Enterprise portal.I created an application in the webdynpro,in that i created pages and inserted iviews to one of the particular page which i created in web dynpro.But its coming in the same page.I want to see each and every iview in different page.
means
WTimesheet (Role)
Timesheet (page)
<<<< EntryView(Iview)
<<<Entry Listing (Iview)
<<>Timesheet Entry (Iview)
By clicking timesheet (page)..It has to show all the iviews under left side of Timesheet Page .
I want image to be uploaded in EP, each and every iview on top of right hand side.
Please help me to do that.
Thanks in advance
Regards
Sushma

Hi Sushma,
What you can do is create a workset with name Timesheet and then create three pages and assign the iview to diffrent pages.
Now on click of TimeSheet workset you can see three pages and on click of that you can see the required iviews.
Regards
Narendra

Slow iView Creation

Similar Messages

Maybe you are looking for