Slow running report in 6i

I have a very complex and large report that runs extremely slow. I have always just put the sql in the data model and run it there. Does using a refcursor or some other method run faster as a general rule? It is taking 5+ minutes for a couple of lines of data that equate to about 6 - 10 pages. When I run the same queries from the command line the data is returned in less than 30 seconds.
Thanks
Andy

One thing we found is if you are using bind parameters in the where clause the report often does not use any indexes (but when you convert to sqlplus you don't have bind parameter and hence runs quicker). Try using lexicals instead

Similar Messages

  • Accrual Reconciliation Load Run  report performance issue.

    we have significant performance issues when running accrual reconciliation load run report. we had to cancel after have it run for a day. any idea on how to resolve it?

    We experienced similar issue. As the runtime of this report depends on the input parameters. Remember, your first run of this report going to take significant amount of time and the subsequent runs will be much shorter.
    But w had to apply the patches referred in the MOS article to resolve the performance issue.
    Accrual Reconciliation Load Run Has Slow Performance [ID 1490578.1]
    Thanks,
    Sunthar....

  • Long Running Reports

    I'm now writing some reports that are slow running. I've tuned the sql, however because the volume of data being returned and the complexity of the report queries the reports will likely never run faster then ~30 seconds.
    I'm using the ApEx advanced reporting (BIP) and ApEx version 3.0.1.
    What are some thoughts on how to best implement long running reports?
    Thanks,
    Todd
    Message was edited by:
    tfa

    Hi Dimitri,
    You asked...
    What happens when you run the report directly from BI
    Publisher?There are several reports from one application. I've run the report queries in OEM SQL Tuning Advisor and tuned them.
    I have not seen a noticeable difference in run times between submitting the reports from APEX or running them from BIP. The queries for these reports have the same run time when run through SQL Developer.
    The slow run time of the report queries can be traced to poor table design. The application is a bit of legacy application with the front end now being rewritten using APEX. The poor table design issues are magnified by the volume of data. I have plans to partition one of the transaction tables.
    Prior to rewriting the user interface in APEX the application was written in Oracle Forms. When written in Forms the application was a bolt-on to the Oracle applications. In that environment users could submit reports to the run in the background (via Concurrent Manger) then the report output was viewed later following the completion of the report.
    I'm pursuing a similar solution as the concurrent manager in Oracle applications but available in the APEX, BIP environment. The reports do run between 30 seconds to 1 minute which is to long for the users to wait on the submitting page. Any thoughts on how it is possible to run these long running reports without tying up the user’s page?
    I'll investigate dbms_scheduler and BIP APIs. I know BIP also has a scheduler available but I do not know much about it.
    Thanks,
    Todd

  • Slow running Apple Macbook air under yosemite that ran fine before upgrading

    Problem description:
    Slow running under yosemite
    Everything runs slow right from startup - long pauses before keystrokes appear in programs. Slow execution of searches
    EtreCheck version: 2.0.6 (91)
    Report generated 20 October 2014 10:28:46 am AEST
    Hardware Information: ℹ️
      MacBook Air (Verified)
      MacBook Air - model: MacBookAir6,2
      1 1.7 GHz Intel Core i7 CPU: 2-core
      8 GB RAM Not upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      Intel HD Graphics 5000 -
      Color LCD 1440 x 900
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:20:33
    Disk Information: ℹ️
      APPLE SSD SM0512F disk0 : (500.28 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 499.05 GB (82.06 GB free)
      Core Storage: disk0s2 499.42 GB Online
    USB Information: ℹ️
      Apple Internal Memory Card Reader
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Parallels Access.app
      [loaded] com.parallels.virtualsound (1.0.27 27 - SDK 10.6) Support
      /Applications/Parallels Desktop.app
      [not loaded] com.parallels.kext.hypervisor (10.0.2 27712 - SDK 10.7) Support
      [not loaded] com.parallels.kext.netbridge (10.0.2 27712 - SDK 10.7) Support
      [not loaded] com.parallels.kext.usbconnect (10.0.2 27712 - SDK 10.7) Support
      [not loaded] com.parallels.kext.vnic (10.0.2 27712 - SDK 10.7) Support
      /System/Library/Extensions
      [not loaded] com.wacom.kext.wacomtablet (6.3.3) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.kodak.BonjourAgent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
      [not loaded] com.wacom.wacomtablet.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [not loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
      [loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
      [loaded] com.sharpcast.xfsmond.plist Support
      [loaded] jp.co.canon.MasterInstaller.plist Support
    User Launch Agents: ℹ️
      [not loaded] com.adobe.ARM.[...].plist Support
      [not loaded] com.adobe.ARM.[...].plist Support
      [not loaded] com.akamai.single-user-client.plist Support
      [invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
      [loaded] com.kodak.KODAK AiO Annual Opt.plist Support
      [loaded] com.kodak.KODAK AiO Firmware Updater.plist Support
      [loaded] com.kodak.KODAK AiO Software Updater.plist Support
      [running] com.kodak.StatisticCollection.plist Support
      [not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
      [not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [not loaded] com.parallels.mobile.startgui.launchagent.plist Support
      [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items: ℹ️
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox ApplicationHidden (/Applications/Dropbox.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      SugarSync ApplicationHidden (/Applications/SugarSync.app)
      EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    Internet Plug-ins: ℹ️
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
      WacomNetscape: Version: 1.1.1-1 Support
      Default Browser: Version: 600 - SDK 10.10
      WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
      AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
      EPPEX Plugin: Version: 10.0 Support
      DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 Support
    User Internet Plug-ins: ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
      WebEx64: Version: 1.0 - SDK 10.6 Support
      Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 Support
    Safari Extensions: ℹ️
      Dashlane
      OpenIE
    3rd Party Preference Panes: ℹ️
      Akamai NetSession Preferences  Support
      Flash Player  Support
      FUSE for OS X (OSXFUSE)  Support
      Java  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Destinations:
      Data [Network]
      Total size: 3 TB
      Total number of backups: 49
      Oldest backup: 2014-01-12 04:25:40 +0000
      Last backup: 2014-10-19 21:19:05 +0000
      Size of backup disk: Excellent
      Backup size 3 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          4% WindowServer
          2% Dropbox
          2% bird
          1% Activity Monitor
          1% fontd
    Top Processes by Memory: ℹ️
      421 MB mds_stores
      129 MB Microsoft Office Reminders
      129 MB Safari
      129 MB CalendarAgent
      120 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      2.05 GB Free RAM
      3.83 GB Active RAM
      1.77 GB Inactive RAM
      940 MB Wired RAM
      1.46 GB Page-ins
      0 B Page-outs

    CleanMyMac has probably damaged your OS. You could try uninstalling it but it probably won't help. You will need to erase your HD and start over. "Cleaning" software like this is unnecessary and often harmful on Macs and should not be installed.

  • It takes long time to load the parameter's value when running we run report

    Hi,
    It takes long time to load the parameter's value when running we run report. What could cause this? How to troubleshoot the behavior of the report? Could I use Profile and what events should i select?
    Thanks

    Hi jori5,
    Based on my understanding, after changing the parameter, the report render very slow, right?
    In Reporting Service, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. To analyze which section take much time, we can check the table Executionlog3 in the ReportServer database. For more information, please
    refer to this article:
    More tips to improve performance of SSRS reports.
    In your scenario, since you mention the query spends less time, the delay might happens during report processing and report rendering section. So you should check Executionlog3 to check which section costs most of time, then you can refer to this article
    to optimize your report:
    Troubleshooting Reports: Report Performance.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

  • What is the best UI for running reports?

    Based on my experience,  am I correct in assuming the Silverlight UI is still the only one supported for running reports?
    Running reports in the html5 UI is not a comparable experience at all.... yet .
    Which UI do you use for your implementation?

    I agree 100%... HTML5 UI for Reports is very clunky, slower and not intuitive when Silverlight's is much better.
    We actually use the Excel Add-In a lot now, we just build the report's shell in C4C quickly and then do our View/Selection customization in Excel. We find it quite fast and everyone knows how to play with Excel reports quickly.
    Since 1402 I believe, the user-experience in the iPad app SAP Customer Insight is also much better with the introduction of dashboards in HTML5 though.
    JB.

  • Slow running MacBook Pro Early 2011

    Am I right in thinking the only way to sort this out from the report below is to get a new hard disk? How do I go about getting Yosemite copied over onto a new drive? Does anyone have any recommendations for reasonably priced SSD's that would work in my machine? Or would it not be worth getting an SSD? Thanks in advance for any help/answers!
    Problem description:
    Slow running mac
    EtreCheck version: 2.1.8 (121)
    Report generated 9 April 2015 20:45:18 BST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,2
        1 2 GHz Intel Core i7 CPU: 4-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 536
    Video Information: ℹ️
        Intel HD Graphics 3000
            Color LCD 1440 x 900
        AMD Radeon HD 6490M - VRAM: 256 MB
    System Software: ℹ️
        OS X 10.10.3 (14D131) - Time since boot: 0:6:5
    Disk Information: ℹ️
        TOSHIBA MK5065GSXF disk0 : (500.11 GB)
        S.M.A.R.T. Status: Failing
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (434.46 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
    User Launch Agents: ℹ️
        [failed]    com.akamai.single-user-client.plist [Click for support] [Click for details]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
        [loaded]    com.valvesoftware.steamclean.plist [Click for support]
        [running]    homebrew.mxcl.mysql.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
    Safari Extensions: ℹ️
        Open in Internet Explorer
    3rd Party Preference Panes: ℹ️
        Akamai NetSession Preferences  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             6%    WindowServer
             1%    launchd
             0%    fontd
             0%    AppleSpell
             0%    2BUA8C4S2C.com.agilebits.onepassword4-helper
    Top Processes by Memory: ℹ️
        464 MB    mysqld
        77 MB    ocspd
        73 MB    Dropbox
        60 MB    WindowServer
        43 MB    softwareupdated
    Virtual Memory Information: ℹ️
        1.11 GB    Free RAM
        1.62 GB    Active RAM
        537 MB    Inactive RAM
        1.02 GB    Wired RAM
        963 MB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Apr 9, 2015, 08:38:11 PM    Self test - passed

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Slow running power book

    hi,
    my power book has started to run really slow.Opening or downloading aything seems to take  forever.
    My Details...
    Any Ideas please?
    Tony

    Hi Allan,
    Thanks for replying.
    I have checked and can say that my hard drive is fine. It is a new laptop.
    My specs are as follows,
    OSX 10.6.8
    2.66 GHz processor -Partioned, 50/50. The MAC 1/2 has 183.5 GB free
    4 GB memory - 1.4GB Free.
    I have recently installed some anti-virus software, could this be an issue.  It is "KERPERSKY Anti Virus"
    By the way My Safari also crashes. and I get this error report.
    Could also be an issue or even the cause?
    Process:         Safari [452]
    Path:            /Applications/Safari.app/Contents/MacOS/Safari
    Identifier:      com.apple.Safari
    Version:         5.1.7 (6534.57.2)
    Build Info:      WebBrowser-75345702~2
    Code Type:       X86 (Native)
    Parent Process:  launchd [218]
    Date/Time:       2012-06-11 12:25:37.715 +0200
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          -3536333 sec
    Crashes Since Last Report:           -2
    Per-App Crashes Since Last Report:   10
    Anonymous UUID:                      A4C41B39-DEE3-45CC-838A-33D5977086F1
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
    Symbol not found: __ZN3JSC6JSCell11getCallDataERNS_8CallDataE
    Referenced from: /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/WebKit2
    Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
    in /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/WebKit2
    Binary Images:
    0x1000 -     0x1ff7  com.apple.Safari 5.1.7 (6534.57.2) <D2D33A8B-C908-5E66-B4C0-1F5E7DAB102A> /Applications/Safari.app/Contents/MacOS/Safari
    0x5000 -   0x664fe7  com.apple.Safari.framework 6534 (6534.57.2) <D43F9630-981A-AB0D-71DD-67A484BB2A84> /System/Library/PrivateFrameworks/Safari.framework/Versions/A/Safari
    0x911000 -   0xab8ff7  libSystem.B.dylib 125.2.11 (compatibility 1.0.0) <2DCD13E3-1BD1-6F25-119A-3863A3848B90> /usr/lib/libSystem.B.dylib
    0xb3a000 -   0xb6ffe7  com.apple.framework.Apple80211 6.2.5 (625.6) <9F56E0EC-EB90-52F6-0ECF-C2E5DE85652E> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
    0xb80000 -   0xb80ff7  com.apple.Carbon 150 (152) <8F767518-AD3C-5CA0-7613-674CD2B509C4> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0xb83000 -   0xb83ff7  com.apple.Cocoa 6.6 (???) <EA27B428-5904-B00B-397A-185588698BCC> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0xb86000 -   0xb8fff7  com.apple.corelocation 12.3 (12.3) <11640844-4B96-4B4D-0419-B7845C4A40FF> /System/Library/Frameworks/CoreLocation.framework/Versions/A/CoreLocation
    0xb9a000 -   0xba5ff7  com.apple.CrashReporterSupport 10.6.7 (258) <8F3E7415-1FFF-0C20-2EAB-6A23B9728728> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
    0xbb1000 -   0xc0eff7  com.apple.framework.IOKit 2.0 (???) <3DABAB9C-4949-F441-B077-0498F8E47A35> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0xc2e000 -   0xedcfe7  com.apple.JavaScriptCore 6534.57 (6534.57.3) <5B18B308-DBB2-7133-DE56-494C2FA1848B> /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
    0xf48000 -  0x10cafe7  libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <D5980817-6D19-9636-51C3-E82BAE26776B> /usr/lib/libicucore.A.dylib
    0x112c000 -  0x11e5fe7  libsqlite3.dylib 9.6.0 (compatibility 9.0.0) <52438E77-55D1-C231-1936-76F1369518E4> /usr/lib/libsqlite3.dylib
    0x11f3000 -  0x1229fff  libtidy.A.dylib ??? (???) <0FD72C68-4803-4C5B-3A63-05D7394BFD71> /usr/lib/libtidy.A.dylib
    0x1236000 -  0x1245fe7  libxar.1.dylib ??? (???) <2FC317EB-7AC2-CD6C-8C09-E06B2DF02929> /usr/lib/libxar.1.dylib
    0x124d000 -  0x125bff7  com.apple.opengl 1.6.14 (1.6.14) <82622F67-E032-0BF6-A78D-50B346E8D0FD> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    0x1263000 -  0x135efff  com.apple.PubSub 1.0.5 (65.28) <6F9B8187-DA37-878F-1760-89116A2B2BE0> /System/Library/Frameworks/PubSub.framework/Versions/A/PubSub
    0x13bc000 -  0x1727ff7  com.apple.QuartzCore 1.6.3 (227.37) <E323A5CC-499E-CA9E-9BC3-537231449CAA> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
    0x17f7000 -  0x1a5dff7  com.apple.security 6.1.2 (55002) <E999CCEF-B769-4355-3E68-6003FCF6FE2B> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x1b3a000 -  0x1bbcffb  SecurityFoundation ??? (???) <C4506287-1AE2-5380-675D-95B0291AA425> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
    0x1bf3000 -  0x1c33ff3  com.apple.securityinterface 4.0.1 (40418.0.1) <2141A924-748E-CE6F-2D75-D82BC265BD30> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
    0x1c54000 -  0x1c64ffb  SyndicationUI ??? (???) <83669983-61AE-3150-C8A2-EABF25FA2331> /System/Library/PrivateFrameworks/SyndicationUI.framework/Versions/A/Syndicatio nUI
    0x1c70000 -  0x1cadff7  com.apple.SystemConfiguration 1.10.8 (1.10.2) <50E4D49B-4F61-446F-1C21-1B2BA814713D> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x1cca000 -  0x1df2fe7  com.apple.WebKit 6534.57 (6534.57.2) <4CB86278-4657-3503-8042-074628222DF3> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
    0x1e9f000 -  0x1fcbff0  com.apple.WebKit2 7534.51 (7534.51.22) <80010229-F68C-3E8F-8BF5-37A8485F6770> /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/WebKit2
    0x20da000 -  0x2144fe7  libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
    0x219f000 -  0x224cfe7  libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <9F8413A6-736D-37D9-8EB3-7986D4699957> /usr/lib/libobjc.A.dylib
    0x2260000 -  0x2260ff7  com.apple.CoreServices 44 (44) <51CFA89A-33DB-90ED-26A8-67D461718A4A> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x2268000 -  0x23e3fe7  com.apple.CoreFoundation 6.6.6 (550.44) <F88C95CD-1264-782D-A1F5-204739847E93> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x24db000 -  0x24dbff7  com.apple.ApplicationServices 38 (38) <8012B504-3D83-BFBB-DA65-065E061CFE03> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x24e3000 -  0x2754fef  com.apple.Foundation 6.6.8 (751.63) <69B3441C-B196-F2AD-07F8-D8DD24E4CD8C> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x2862000 -  0x3145ff7  com.apple.AppKit 6.6.8 (1038.36) <A353465E-CFC9-CB75-949D-786F6F7732F6> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x35e1000 -  0x35effe7  libz.1.dylib 1.2.3 (compatibility 1.0.0) <33C1B260-ED05-945D-FC33-EF56EC791E2E> /usr/lib/libz.1.dylib
    0x35f4000 -  0x3600ff7  libkxld.dylib ??? (???) <9A441C48-2D18-E716-5F38-CBEAE6A0BB3E> /usr/lib/system/libkxld.dylib
    0x3604000 -  0x364aff7  libauto.dylib ??? (???) <29422A70-87CF-10E2-CE59-FEE1234CFAAE> /usr/lib/libauto.dylib
    0x3657000 -  0x365afe7  libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
    0x365d000 -  0x3667fe7  com.apple.audio.SoundManager 3.9.3 (3.9.3) <5F494955-7290-2D91-DA94-44B590191771> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
    0x366f000 -  0x3675fff  com.apple.CommonPanels 1.2.4 (91) <2438AF5D-067B-B9FD-1248-2C9987F360BA> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
    0x367d000 -  0x3680ffb  com.apple.help 1.3.2 (41.1) <8AC20B01-4A3B-94BA-D8AF-E39034B97D8C> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
    0x3685000 -  0x39a9fef  com.apple.HIToolbox 1.6.5 (???) <21164164-41CE-61DE-C567-32E89755CB34> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
    0x3ae9000 -  0x3b4dffb  com.apple.htmlrendering 72 (1.1.4) <4D451A35-FAB6-1288-71F6-F24A4B6E2371> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
    0x3b6f000 -  0x3b84fff  com.apple.ImageCapture 6.1 (6.1) <B909459A-EAC9-A7C8-F2A9-CD757CDB59E8> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
    0x3b9a000 -  0x3c48ff3  com.apple.ink.framework 1.3.3 (107) <233A981E-A2F9-56FB-8BDE-C2DEC3F20784> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
    0x3c72000 -  0x3cb5ff7  com.apple.NavigationServices 3.5.4 (182) <8DC6FD4A-6C74-9C23-A4C3-715B44A8D28C> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
    0x3cde000 -  0x3cfafe3  com.apple.openscripting 1.3.1 (???) <2A748037-D1C0-6D47-2C4A-0562AF799AC9> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
    0x3d0a000 -  0x3d0cff7  com.apple.securityhi 4.0 (36638) <6118C361-61E7-B34E-93DB-1B88108F8F18> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
    0x3d11000 -  0x3d1bffb  com.apple.speech.recognition.framework 3.11.1 (3.11.1) <7486003F-8FDB-BD6C-CB34-DE45315BD82C> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
    0x3d24000 -  0x3d9efff  com.apple.audio.CoreAudio 3.2.6 (3.2.6) <156A532C-0B60-55B0-EE27-D02B82AA6217> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x3dd0000 -  0x40f0ff3  com.apple.CoreServices.CarbonCore 861.39 (861.39) <5C59805C-AF39-9010-B8B5-D673C9C38538> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
    0x4166000 -  0x4212fe7  com.apple.CFNetwork 454.12.4 (454.12.4) <DEDCD006-389F-967F-3405-EDF541F406D7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
    0x4277000 -  0x42bbfe7  com.apple.Metadata 10.6.3 (507.15) <74F05E64-2A68-BA10-CCD4-128D164E5A0F> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
    0x42e2000 -  0x43adfef  com.apple.CoreServices.OSServices 359.2 (359.2) <7C16D9C8-6F41-5754-17F7-2659D9DD9579> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
    0x440c000 -  0x448cfeb  com.apple.SearchKit 1.3.0 (1.3.0) <2F5DE102-A203-7905-7D12-FCBCF17BAEF8> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    0x44c0000 -  0x44f3ff7  com.apple.AE 496.5 (496.5) <BF9673D5-2419-7120-26A3-83D264C75222> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
    0x450b000 -  0x45a8fe3  com.apple.LaunchServices 362.3 (362.3) <15B47388-16C8-97DA-EEBB-1709E136169E> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
    0x45e7000 -  0x460dffb  com.apple.DictionaryServices 1.1.2 (1.1.2) <43E1D565-6E01-3681-F2E5-72AE4C3A097A> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
    0x4623000 -  0x462cff7  com.apple.DiskArbitration 2.3 (2.3) <E9C40767-DA6A-6CCB-8B00-2D5706753000> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
    0x4636000 -  0x464afe7  libbsm.0.dylib ??? (???) <821E415B-6C42-D359-78FF-E892792F8C52> /usr/lib/libbsm.0.dylib
    0x4653000 -  0x4660ff7  com.apple.NetFS 3.2.2 (3.2.2) <DDC9C397-C35F-8D7A-BB24-3D1B42FA5FAB> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
    0x4669000 -  0x4691ff7  libxslt.1.dylib 3.24.0 (compatibility 3.0.0) <E761F29A-328B-29D9-3DF0-023F2C21E500> /usr/lib/libxslt.1.dylib
    0x469c000 -  0x479cfe7  libxml2.2.dylib 10.3.0 (compatibility 10.0.0) <BE7FCD73-03B5-25A4-FCA4-D4980F1488D6> /usr/lib/libxml2.2.dylib
    0x47c0000 -  0x4faf557  com.apple.CoreGraphics 1.545.0 (???) <1D9DC7A5-228B-42CB-7018-66F42C3A9BB3> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
    0x5077000 -  0x523afeb  com.apple.ImageIO.framework 3.0.5 (3.0.5) <87750C2B-193F-56A6-AB97-0842A2D02092> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
    0x5299000 -  0x52fafe7  com.apple.CoreText 151.12 (???) <98F53C15-1D29-A2B3-0717-5A26A2699163> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
    0x5332000 -  0x53cdfe7  com.apple.ApplicationServices.ATS 275.19 (???) <2E83B3E9-AF39-36FC-5D05-CC1E952098AB> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
    0x53f4000 -  0x54b0fff  com.apple.ColorSync 4.6.8 (4.6.8) <920DD017-8B41-7334-E554-A85DB99EBD5A> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
    0x54e7000 -  0x553aff7  com.apple.HIServices 1.8.3 (???) <1D3C4587-6318-C339-BD0F-1988F246BE2E> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
    0x5565000 -  0x5576ff7  com.apple.LangAnalysis 1.6.6 (1.6.6) <3036AD83-4F1D-1028-54EE-54165E562650> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
    0x5583000 -  0x562bffb  com.apple.QD 3.36 (???) <FA2785A4-BB69-DCB4-3BA3-7C89A82CAB41> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
    0x5658000 -  0x566cffb  com.apple.speech.synthesis.framework 3.10.35 (3.10.35) <0DBE17D5-17A2-8A0E-8572-5A78408B41C9> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
    0x567a000 -  0x567aff7  com.apple.Accelerate 1.6 (Accelerate 1.6) <3891A689-4F38-FACD-38B2-4BF937DE30CF> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
    0x567d000 -  0x56ccfe7  libTIFF.dylib ??? (???) <D0EB31DC-40E6-9A97-64D3-9867605DC3DD> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
    0x56d8000 -  0x56dcff7  libGIF.dylib ??? (???) <5D29E5F4-30B9-5A24-55E7-BCBA30499093> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
    0x56e1000 -  0x56fffe7  libPng.dylib ??? (???) <45185287-25AD-C239-AA58-8FA53DF55B79> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
    0x5708000 -  0x570aff7  libRadiance.dylib ??? (???) <98EC06D5-1A02-EDEF-BF9D-2C986761AD54> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
    0x570e000 -  0x5732ff7  libJPEG.dylib ??? (???) <5F2343E4-C268-B9AE-1BC3-466F5A614648> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
    0x5739000 -  0x5819fe7  com.apple.vImage 4.1 (4.1) <D029C515-08E1-93A6-3705-DD062A3A672C> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
    0x5827000 -  0x5827ff7  com.apple.Accelerate.vecLib 3.6 (vecLib 3.6) <ABF97DA4-3BDF-6FFD-6239-B023CA1F7974> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
    0x582a000 -  0x586cff7  libvDSP.dylib 268.0.1 (compatibility 1.0.0) <8A4721DE-25C4-C8AA-EA90-9DA7812E3EBA> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
    0x5875000 -  0x58e4ff7  libvMisc.dylib 268.0.1 (compatibility 1.0.0) <595A5539-9F54-63E6-7AAC-C04E1574B050> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
    0x58ed000 -  0x5d03ff7  libBLAS.dylib 219.0.0 (compatibility 1.0.0) <C4FB303A-DB4D-F9E8-181C-129585E59603> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
    0x5d45000 -  0x617aff7  libLAPACK.dylib 219.0.0 (compatibility 1.0.0) <5E2D2283-57DE-9A49-1DB0-CD027FEFA6C2> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
    0x6300000 -  0x6402fe7  libcrypto.0.9.8.dylib 0.9.8 (compatibility 0.9.8) <015563C4-81E2-8C8A-82AC-31B38D904A42> /usr/lib/libcrypto.0.9.8.dylib
    0x6456000 -  0x6457ff7  com.apple.TrustEvaluationAgent 1.1 (1) <2D970A9B-77E8-EDC0-BEC6-7580D78B2843> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
    0x645b000 -  0x6513feb  libFontParser.dylib ??? (???) <D2D0C922-5ED1-3AE9-6F99-707C74DF3E62> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
    0x65a3000 -  0x65ddff7  libcups.2.dylib 2.8.0 (compatibility 2.0.0) <6875335E-0993-0D77-4E80-41763A8477CF> /usr/lib/libcups.2.dylib
    0x65ea000 -  0x660afe7  libresolv.9.dylib 41.1.0 (compatibility 1.0.0) <8C2B5FA8-2469-21C7-D297-F95A0FFE5F19> /usr/lib/libresolv.9.dylib
    0x6614000 -  0x6658ff3  com.apple.coreui 2 (114) <2234855E-3BED-717F-0BFA-D1A289ECDBDA> /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
    0x6677000 -  0x6751fff  com.apple.DesktopServices 1.5.11 (1.5.11) <800F2040-9211-81A7-B438-7712BF51DEE3> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
    0x679c000 -  0x68d9fe7  com.apple.audio.toolbox.AudioToolbox 1.6.7 (1.6.7) <423BDE4D-5082-B6CA-BB2C-E22A037235A4> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x6949000 -  0x6999ff7  com.apple.framework.familycontrols 2.0.2 (2020) <596ADD85-79F5-A613-537B-F83B6E19013C> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
    0x69b1000 -  0x69c3ff7  com.apple.MultitouchSupport.framework 207.11 (207.11) <6FF4F2D6-B8CD-AE13-56CB-17437EE5B741> /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/Multit ouchSupport
    0x69d0000 -  0x69efff7  com.apple.CoreVideo 1.6.2 (45.6) <EB53CAA4-5EE2-C356-A954-5775F7DDD493> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
    0x6a06000 -  0x6a37ff7  libGLImage.dylib ??? (???) <D18E2E76-DBF4-6930-039A-F66CA0D120B3> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
    0x6a3f000 -  0x6a60fe7  com.apple.opencl 12.3.6 (12.3.6) <B4104B80-1CB3-191C-AFD3-697843C6BCFF> /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL
    0x6a69000 -  0x6a6dff7  IOSurface ??? (???) <89D859B7-A26A-A5AB-8401-FC1E01AC7A60> /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface
    0x6a75000 -  0x6ab8ff7  libGLU.dylib ??? (???) <6CC3CE6A-7024-C685-EADA-7F9DC27128E2> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
    0x6ac6000 -  0x6ad1ff7  libGL.dylib ??? (???) <3E34468F-E9A7-8EFB-FF66-5204BD5B4E21> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
    0x6ae0000 -  0x6becfe7  libGLProgrammability.dylib ??? (???) <6167CEB0-D8D6-C4D9-DD74-49755ADB540F> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
    0x6c0b000 -  0x6c0eff7  libCoreVMClient.dylib ??? (???) <37F56237-4ABA-E5B5-968D-70FFE357E8E0> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
    0x6c13000 -  0x6c17ff7  libGFXShared.dylib ??? (???) <09540618-2ED1-72C4-61CB-938B35927568> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
    0x6c1c000 -  0x6c1dff7  com.apple.audio.units.AudioUnit 1.6.7 (1.6.7) <93EC71F1-4D4E-F456-8EFE-32E7EFD7A064> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x6c22000 -  0x6c22ff7  com.apple.vecLib 3.6 (vecLib 3.6) <FF4DC8B6-0AB0-DEE8-ADA8-7B57645A1F36> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
    0x6c25000 -  0x6c2aff7  com.apple.OpenDirectory 10.6 (10.6) <0603680A-A002-D294-DE83-0D028C6BE884> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
    0x6c32000 -  0x6c38fe7  com.apple.CommerceCore 1.0 (9.1) <521D067B-3BDA-D04E-E1FA-CFA526C87EB5> /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/Frameworks/C ommerceCore.framework/Versions/A/CommerceCore
    0x6c3f000 -  0x6c57ff7  com.apple.CFOpenDirectory 10.6 (10.6) <D1CF5881-0AF7-D164-4156-9E9067B7FA37> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
    0x6c68000 -  0x6cb5feb com.apple.DirectoryService.PasswordServerFramework 6.1 (6.1) <00A1A83B-0E7D-D0F4-A643-8C5675C2BB21> /System/Library/PrivateFrameworks/PasswordServer.framework/Versions/A/PasswordS erver
    0x6cd1000 -  0x6cf3fef  com.apple.DirectoryService.Framework 3.6 (621.14) <A24C9308-4EB3-456D-1691-43DDB6F9A79F> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
    0x6cfd000 -  0x6d0dff7  libsasl2.2.dylib 3.15.0 (compatibility 3.0.0) <C8744EA3-0AB7-CD03-E639-C4F2B910BE5D> /usr/lib/libsasl2.2.dylib
    0x6d14000 -  0x6e42fe7  com.apple.CoreData 102.1 (251) <87FE6861-F2D6-773D-ED45-345272E56463> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
    0x6ea6000 -  0x6ea6ff7  liblangid.dylib ??? (???) <B99607FC-5646-32C8-2C16-AFB5EA9097C2> /usr/lib/liblangid.dylib
    0x6eaa000 -  0x6ee4fe7  libssl.0.9.8.dylib 0.9.8 (compatibility 0.9.8) <C62A7753-99A2-6782-92E7-6628A6190A90> /usr/lib/libssl.0.9.8.dylib
    0x6ef6000 -  0x6f03fe7  libbz2.1.0.dylib 1.0.5 (compatibility 1.0.0) <828CCEAB-F193-90F1-F48C-54E3C88B29BC> /usr/lib/libbz2.1.0.dylib
    0x6f08000 -  0x6f77ff7  com.apple.ISSupport 1.9.7 (55) <77905553-740D-90E8-6B2E-ABF5B3D40CBF> /System/Library/PrivateFrameworks/ISSupport.framework/Versions/A/ISSupport
    0x6fae000 -  0x7d26fe7  com.apple.WebCore 6534.57 (6534.57.2) <6AF29D9A-F549-5BE7-3842-CFF75FC46360> /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
    0x20000000 - 0x20098fe7  edu.mit.Kerberos 6.5.11 (6.5.11) <F36DB665-A88B-7F5B-6244-6A2E7FFFF668> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
    0x64b00000 - 0x64b07ff3  com.apple.print.framework.Print 6.1 (237.1) <F5AAE53D-5530-9004-A9E3-2C1690C5328E> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
    0x8fe00000 - 0x8fe4163b  dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
    0xfa100000 - 0xfa192fe7  com.apple.print.framework.PrintCore 6.3 (312.7) <7410D1B2-655D-68DA-D4B9-2C65747B6817> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
    0xffff0000 - 0xffff1fff  libSystem.B.dylib ??? (???) <2DCD13E3-1BD1-6F25-119A-3863A3848B90> /usr/lib/libSystem.B.dylib
    Model: MacBookPro6,1, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.57f17
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS725050A9A362, 465.76 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB Storage, 0x05e3  (Genesys Logic, Inc.), 0x0715, 0xfa130000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8218, 0xfa113000 / 8
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0237, 0xfa120000 / 3
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0xfd110000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd120000 / 3
    On 10 Jun 2012, at 18:18, Apple Support Communities Updates wrote:
    > Apple Support Communities
    > Re: slow running power book
    > created by Allan Jones in PowerBook - View the full discussion
    >  This solved my question  This helped me
    > I maintain some older PowerBooks for a friend and one of his started doing everything slowly that it used to do well, like starting up, saving files, switching application, etc, and his problem turned out to be a dying hard drive. We were able to get all the info off his old drive before it totally died and install and larger, faster drive in its place and the previous slowdowns went away.
    >
    > 
    > However, a hard drive that is simply too full can slow things badly. So can anti-virus/internet security packages or a minimum amount of RAM.
    >
    > 
    > If you will redo your specs that failed to make the first trip, we can offer more targeted suggestions. Be sure to include the Mac OS version you have.
    >
    >  This solved my question  This helped me
    > Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
    > Start a new discussion in the same community
    > You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    >      • © 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
    >      • All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
    Tony Van Dort
    [email protected]

  • WIJ 20002 error on long running reports

    When trying to run a long running report, an error message is received .
    Quote:
    *"The Web Intelligence Java Report Panel cannot connect to the server. Close
    the report panel and try to connect again or see your BusinessObjects
    administrator. (Error: WIJ 20002)"*
    What happens next is you are advised to "close" (twice) and are then advised to close this window.
    If you select Details on the first error message:
    Server: https://test.i3access.iowa.gov:443/desktoplaunch/InfoView/CrystalEnterprise_Webi/cdzServlet?
    java.lang.RuntimeException: java.io.IOException: Server returned HTTP response code: 502 for URL: https://test.i3access.iowa.gov:443/desktoplaunch/InfoView/CrystalEnterprise_Webi/cdzServlet
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
         at com.businessobjects.wp.cpi.CPIConnection.postRequest(CPIConnection.java:437)
         at com.businessobjects.wp.xml.XMLViaHttp.loadScript(XMLViaHttp.java:144)
         at com.businessobjects.wp.xml.XMLViaHttp.getPromptList(XMLViaHttp.java:1284)
         at com.businessobjects.wp.xml.XMLLoader.getPromptList(XMLLoader.java:279)
         at com.businessobjects.wp.om.OMQuery.loadPromptsAndContexts(OMQuery.java:359)
         at com.businessobjects.wp.om.OMQuery.getActiveContextCount(OMQuery.java:384)
         at com.businessobjects.wp.tc.query.TCQueryPropertie.buildQueryContextFromUI(TCQueryPropertie.java:496)
         at com.businessobjects.wp.tc.query.TCQueryTab.buildQueryContextFromUI(TCQueryTab.java:846)
         at com.businessobjects.wp.tc.query.TCQueryTab.modifyQueryProperties(TCQueryTab.java:638)
         at com.businessobjects.wp.tc.query.TCQueryTabManager.modifyQueryTabs(TCQueryTabManager.java:306)
         at com.businessobjects.wp.tc.query.TCQueryPanel.modifyQueryTabs(TCQueryPanel.java:310)
         at com.businessobjects.wp.tc.query.TCQueryPanel.load(TCQueryPanel.java:383)
         at com.businessobjects.wp.tc.TCMainPanel.switchToQueryPanel(TCMainPanel.java:563)
         at com.businessobjects.wp.tc.TCMainPanel.actionPerformed(TCMainPanel.java:506)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at com.jidesoft.plaf.basic.BasicJideButtonListener.mouseReleased(Unknown Source)
         at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at javax.swing.JComponent.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
         at com.businessobjects.wp.cpi.CPIConnection.postRequest(CPIConnection.java:441)
         at com.businessobjects.wp.xml.XMLViaHttp.loadScript(XMLViaHttp.java:144)
         at com.businessobjects.wp.xml.XMLViaHttp.getPromptList(XMLViaHttp.java:1284)
         at com.businessobjects.wp.xml.XMLLoader.getPromptList(XMLLoader.java:279)
         at com.businessobjects.wp.om.OMQuery.loadPromptsAndContexts(OMQuery.java:359)
         at com.businessobjects.wp.om.OMQuery.getActiveContextCount(OMQuery.java:384)
         at com.businessobjects.wp.tc.query.TCQueryPropertie.buildQueryContextFromUI(TCQueryPropertie.java:496)
         at com.businessobjects.wp.tc.query.TCQueryTab.buildQueryContextFromUI(TCQueryTab.java:846)
         at com.businessobjects.wp.tc.query.TCQueryTab.modifyQueryProperties(TCQueryTab.java:638)
         at com.businessobjects.wp.tc.query.TCQueryTabManager.modifyQueryTabs(TCQueryTabManager.java:306)
         at com.businessobjects.wp.tc.query.TCQueryPanel.modifyQueryTabs(TCQueryPanel.java:310)
         at com.businessobjects.wp.tc.query.TCQueryPanel.load(TCQueryPanel.java:383)
         at com.businessobjects.wp.tc.TCMainPanel.switchToQueryPanel(TCMainPanel.java:563)
         at com.businessobjects.wp.tc.TCMainPanel.actionPerformed(TCMainPanel.java:506)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at com.jidesoft.plaf.basic.BasicJideButtonListener.mouseReleased(Unknown Source)
         at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at javax.swing.JComponent.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    Please let me know what the solution is.

    Matt,
    A namesake of yours is my client for this issue.
    Coming to the problem, the customer says there is proxy configured between HTTP server and WebSphere. This proxy server times out for long running reports. If the HTTPServer is bypassed, things work fine.
    A colleague of mine opened a case with BOBJ. I can get you the case# if you need it. We got this reply:
    From: Takano, Hitomi
    Sent: Tuesday, November 04, 2008 10:26 AM
    Hi Matt,
    I was away for the last two days, so I couldn't reply to you sooner.
    Extending the timeout setting from Webi and Infoview in BOXI R2 will not
    make the long running reports work as your proxy setting at the lower
    layer than BOXI just allows 5 minutes and after that the connection will
    be cancelled by the proxy. I'm not sure why this setting was effective
    for https only or timeout out after 2 min. This is out of scope of BOXI
    R2 and your network admin would be the best person to handle. You were
    getting 502 error in Java Report Panel. I googled with "502 error and
    ProxyTimeout", and I got the some articles returned which say  when
    backend doesn't answer on requests(because it timed out), it returns to
    a client an error 502.
    I'll close this thread as the n/w admin at the client are working things out.
    Thanks for your support.

  • Get a Report crashed error while running report using the mode character

    Hello,
    I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
    I'm using report 6i and Oracle 8i.
    Thanks in advance for your help.
    Regards,
    Laurent.

    Hi Thanks for the response,
    In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
    Regards,
    Laurent.

  • FRM-92101 error while running report from a button or menu

    Hi All,
    I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
    Arif

    Hello Sir,
    Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
    SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
    FROM branch br,
    (SELECT gladbrid branchid,
    SUM
    (CASE
    WHEN ga.gl_acc_categry IN ('L', 'I')
    THEN gd.gladbalance
    ELSE -1 * gd.gladbalance
    END
    ) AS difference
    FROM glaccount ga, glaccountdetail gd
    WHERE ga.glid = gd.gladglid
    GROUP BY gladbrid) dif
    WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
    and dif.difference!=0
    ORDER BY br.bid;
    and the code against the button or menu item is---
    DECLARE
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    rep_status VARCHAR2(20);
    BEGIN
    repid := FIND_REPORT_OBJECT('ASSET');
    v_rep := RUN_REPORT_OBJECT(repid);
    rep_status := REPORT_OBJECT_STATUS(v_rep);
    WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
    LOOP
    rep_status := report_object_status(v_rep);
    END LOOP;
    IF rep_status = 'FINISHED' THEN
    /*Display report in the browser*/
    WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
    substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
    ELSE
    message('Error when running report');
    END IF;
    Clear_message;
    END;
    Clear_message;
    which has shown the error FRM-92101 and didn't run the report.
    In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
    It is mentioned that there had no error on my codes.
    Arif

  • Can't run report in ASYNCHRONOUS mode

    Hi All,
    I'm trying to make a report run in ASYNCHRONOUS mode. I want to press a button on a form, submit the report to the reports server and be able to navigate within the form while the report is being executed on the reports server.
    My problem is, no matter what mode I choose (ASYNCHRONOUS or SYNCHRONOUS), the mode ALWAYS ends up being SYNCHRONOUS. After I press the button (code below), I get the hourglass and I can't navigate within the form until the report is finished. Then I can view it.
    The reports server I'm using is installed locally on the same PC I'm testing the form.
    Can someone help me please? I'm using using Forms Builder 9.0.2.9.0.
    Thank you,
    Artur
    declare
         v_repid REPORT_OBJECT;
    v_rep in varchar2(100);
    begin
    v_repid := find_report_object('TEST');
    SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_EXECUTION_MODE, BATCH);
    SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_COMM_MODE, ASYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESTYPE, 'CACHE');
    SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESFORMAT, 'PDF'); -- OR HTMLCSS
    SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_SERVER, :TI_REPORTS_SERVER); -- local pc reports server
    v_rep := RUN_REPORT_OBJECT(v_repid, v_param_list);
    end;

    Arthur,
    Communication mode is soemthing forms handles when calling the run report object. Your code looks fine. You might get a quikc answer if you can post this in Forms mailing list
    Thanks
    The Oracle Reports Team

  • Not Able to run Report 10g through Web Layout Option

    I have installed Oracle Developer 10g on my Laptop, I am able to run form, Report(In paper layout) successfully but when I try to run Report in Web Layout Mode, I am getting following error, Is there any setting is missing, could you provide some hint that would help me in resolving my issue.
    Thanks
    Kamlesh
    500 Internal Server Error
    OracleJSP: oracle.jsp.provider.JspCompileException:
    Errors compiling:C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\3000\default\defaultWebApp\persistence\_pages\\_MODULE1001201432.java
    javac: invalid flag: Files\Java\j2re1.4.2_01\lib\ext\QTJava.zip;;C:\Dev10g\j2ee\home\lib/ejb.jar;C:\Dev10g\j2ee\home\lib/servlet.jar;C:\Dev10g\j2ee\home\lib/ojsp.jar;C:\Dev10g\j2ee\home\lib/jndi.jar;C:\Dev10g\j2ee\home\lib/jdbc.jar;C:\Dev10g\j2ee\home\iiop.jar;C:\Dev10g\j2ee\home\iiop_gen_bin.jar;C:\Dev10g\j2ee\home\lib/jms.jar;C:\Dev10g\j2ee\home\lib/jta.jar;C:\Dev10g\j2ee\home\lib/jmxri.jar;C:\Dev10g\j2ee\home\lib/javax77.jar;C:\Dev10g\j2ee\home\lib/javax88.jar;C:\Dev10g\j2ee\home\../../opmn/lib/ons.jar;C:\Dev10g\j2ee\home\../../opmn/lib/optic.jar;C:\Dev10g\j2ee\home\../../lib/dms.jar;C:\Dev10g\j2ee\home\../../dms/lib/dms.jar;C:\Dev10g\j2ee\home\../../diagnostics/lib/ojdl.jar;C:\Dev10g\j2ee\home\../../dms/diagnostics/lib/ojdl.jar;C:\Dev10g\j2ee\home\lib/connector.jar;C:\Dev10g\j2ee\home\lib/bcel.jar;C:\Dev10g\j2ee\home\lib/cos.jar;C:\Dev10g\j2ee\home\lib/jsse.jar;C:\Dev10g\j2ee\home\../../oracle/lib/jsse.jar;C:\Dev10g\j2ee\home\lib/jnet.jar;C:\Dev10g\j2ee\home\lib/jcert.jar;C:\Dev10g\j2ee\home\lib/activation.jar;C:\Dev10g\j2ee\home\lib/mail.jar;C:\Dev10g\j2ee\home\../../javavm/lib/jasper.zip;C:\Dev10g\j2ee\home\../../lib/xmlparserv2.jar;C:\Dev10g\j2ee\home\../../oracle/lib/xmlparserv2.jar;C:\Dev10g\j2ee\home\../../jlib/orai18n.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/orai18n.jar;C:\Dev10g\j2ee\home\lib/jaxp.jar;C:\Dev10g\j2ee\home\lib/jaas.jar;C:\Dev10g\j2ee\home\jazn.jar;C:\Dev10g\j2ee\home\../../jdbc/lib/classes12dms.jar;C:\Dev10g\j2ee\home\../../oracle/jdbc/lib/classes12dms.jar;C:\Dev10g\j2ee\home\../../jdbc/lib/nls_charset12.jar;C:\Dev10g\j2ee\home\../../oracle/jdbc/lib/nls_charset12.jar;C:\Dev10g\j2ee\home\jaxb-rt-1.0-ea.jar;C:\Dev10g\j2ee\home\../../soap/lib/soap.jar;C:\Dev10g\j2ee\home\../../webservices/lib/wsserver.jar;C:\Dev10g\j2ee\home\../../webservices/lib/wsdl.jar;C:\Dev10g\j2ee\home\../../rdbms/jlib/aqapi.jar;C:\Dev10g\j2ee\home\lib/jem.jar;C:\Dev10g\j2ee\home\../../javacache/lib/cache.jar;C:\Dev10g\j2ee\home\lib/http_client.jar;C:\Dev10g\j2ee\home\../../jlib/jssl-1_1.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/jssl-1_1.jar;C:\Dev10g\j2ee\home\../../jlib/repository.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/repository.jar;C:\Dev10g\j2ee\home\lib/jaasmodules.jar;C:\Dev10g\j2ee\home\../../sqlj/lib/runtime12ee.jar;C:\Dev10g\j2ee\home\../../sqlj/lib/translator.jar;C:\Dev10g\j2ee\home\lib/crimson.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcs.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcs.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcp.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcp.jar;C:\Dev10g\j2ee\home\../../jlib/ojpse.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpse.jar;C:\Dev10g\j2ee\home\../../jlib/ojpsmime.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpsmime.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcms.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcms.jar;;;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\lib\reports_tld.jar;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\classes;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\lib\reports_tld.jar;.
    Usage: javac
    where possible options include:
    -g Generate all debugging info
    -g:none Generate no debugging info
    -g:{lines,vars,source} Generate only some debugging info
    -nowarn Generate no warnings
    -verbose Output messages about what the compiler is doing
    -deprecation Output source locations where deprecated APIs are used
    -classpath Specify where to find user class files
    -sourcepath Specify where to find input source files
    -bootclasspath Override location of bootstrap class files
    -extdirs Override location of installed extensions
    -d Specify where to place generated class files
    -encoding Specify character encoding used by source files
    -source Provide source compatibility with specified release
    -target Generate class files for specific VM version
    -help Print a synopsis of standard options

    Hello,
    The problem seems to be a space in the Classpath :
    javac: invalid flag: Files\Java\j2re1.4.2_01
    Files\Java\j2re1.4.2_01 seems to be the end of c:\Program Files\Java\j2re1.4.2_01 ..
    Check REPORTS_CLASSPATH
    regards

  • CRM ONLINE 2013: On Approval Of Quotation, Run Report, Generate PDF and Send an Email With PDF as attachment

    Hi,
    I am using CRM ONLINE 2013.
    How to automate below process?
    1. On Approval Of Quotation, Run Report.
    2. Generate PDF.
    3. Send an Email With PDF as attachment.
    As i have gone through many forums for this topic, but creating a plugin code for generating Report PDF is not possible in CRM ONLINE.
    So, What is the alternate way to do this..?
    Thanks.

    This is my entire code mentioned below:-
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
        <title></title>
        <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
        <script type="text/javascript">
            if (typeof (SDK) == "undefined")
            { SDK = { __namespace: true }; }
            SDK.JScriptRESTDataOperations = {
                _context: function () {
                    if (typeof GetGlobalContext != "undefined")
                    { return GetGlobalContext(); }
                    else {
                        if (typeof Xrm != "undefined") {
                            return Xrm.Page.context;
                        else { return new Error("Context is not available."); }
                _getServerUrl: function () {
                    var serverUrl = this._context().getServerUrl()
                    if (serverUrl.match(/\/$/)) {
                        serverUrl = serverUrl.substring(0, serverUrl.length - 1);
                    return serverUrl;
                _ODataPath: function () {
                    return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
                _errorHandler: function (req) {
                    return new Error("Error : " +
      req.status + ": " +
      req.statusText + ": " +
      JSON.parse(req.responseText).error.message.value);
                _dateReviver: function (key, value) {
                    var a;
                    if (typeof value === 'string') {
                        a = /Date\(([-+]?\d+)\)/.exec(value);
                        if (a) {
                            return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
                    return value;
                Create: function (object, type, successCallback, errorCallback) {
                    var req = new XMLHttpRequest();
                    req.open("POST", this._ODataPath() + type + "Set", true);
                    req.setRequestHeader("Accept", "application/json");
                    req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                    req.onreadystatechange = function () {
                        if (this.readyState == 4 /* complete */) {
                            if (this.status == 201) {
                                successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
                            else {
                                errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                    req.send(JSON.stringify(object));
                Retrieve: function (id, type, successCallback, errorCallback) {
                    var req = new XMLHttpRequest();
                    req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
                    req.setRequestHeader("Accept", "application/json");
                    req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                    req.onreadystatechange = function () {
                        if (this.readyState == 4 /* complete */) {
                            if (this.status == 200) {
                                successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
                            else {
                                errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                    req.send();
                Update: function (id, object, type, successCallback, errorCallback) {
                    var req = new XMLHttpRequest();
                    req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
                    req.setRequestHeader("Accept", "application/json");
                    req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                    req.setRequestHeader("X-HTTP-Method", "MERGE");
                    req.onreadystatechange = function () {
                        if (this.readyState == 4 /* complete */) {
                            if (this.status == 204 || this.status == 1223) {
                                successCallback();
                            else {
                                errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                    req.send(JSON.stringify(object));
                Delete: function (id, type, successCallback, errorCallback) {
                    var req = new XMLHttpRequest();
                    req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
                    req.setRequestHeader("Accept", "application/json");
                    req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                    req.setRequestHeader("X-HTTP-Method", "DELETE");
                    req.onreadystatechange = function () {
                        if (this.readyState == 4 /* complete */) {
                            if (this.status == 204 || this.status == 1223) {
                                successCallback();
                            else {
                                errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                    req.send();
                RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
                    if (filter != null) {
                        filter = "?" + filter;
                    else { filter = ""; }
                    var req = new XMLHttpRequest();
                    req.open("GET", this._ODataPath() + type + "Set" + filter, true);
                    req.setRequestHeader("Accept", "application/json");
                    req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                    req.onreadystatechange = function () {
                        if (this.readyState == 4 /* complete */) {
                            if (this.status == 200) {
                                successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
                            else {
                                errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                    req.send();
                __namespace: true
        </script>
        <script type="text/javascript">
            //Create Email and link it with Order as Regarding field
            var Xrm;
            var email = new Object();
            var ownerID = "";
            var CustomerId = "";
            if (window.opener) { Xrm = window.opener.Xrm; }
            else if (window.parent) { Xrm = window.parent.Xrm; }
            //Get ownerid who send email of quotation to customer
            function GetOwnerID() {
                var owner = Xrm.Page.getAttribute("ownerid").getValue();
                ownerID = owner[0].id;
                var ownerName = owner[0].name;
                var entityType = owner[0].entityType;
                GetToEmailGUID();
            //Get customerid who receive email of quotation from owner
            function GetToEmailGUID() {
                var Customer = Xrm.Page.getAttribute('customerid').getValue();
                CustomerId = Customer[0].id;
                var CustomerName = Customer[0].name;
                var entityType = Customer[0].entityType;
                //if CustomerId is type of "Account" then get Primary Contact id of that account
                if (entityType == "account") {
                    var contact = Xrm.Page.getAttribute("customerid").getValue();
                    if (contact === null) return;
                    var serverUrl = Xrm.Page.context.getClientUrl();
                    var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
                    var req = new XMLHttpRequest();
                    req.open("GET", oDataSelect, false);
                    req.setRequestHeader("Accept", "application/json");
                    req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
                    req.onreadystatechange = function () {
                        if (req.readyState === 4) {
                            if (req.status === 200) {
                                var retrieved = JSON.parse(req.responseText).d;
                                CustomerId = retrieved.PrimaryContactId.Id;
                            else {
                                alert(this.statusText);
                    req.send();
            function CreateEmail() {
                GetOwnerID();
                email.Subject = "Email with Report Attachment";
                //Set The current order as the Regarding object
                email.RegardingObjectId = {
                    Id: Xrm.Page.data.entity.getId(),    //Get the current entity Id , here OrderId
                    LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
                //Create Email Activity
                SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
            // Email Call Back function
            function EmailCallBack(result) {
                email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
                var activityPartyFrom = new Object();
                // Set the From party of the ActivityParty to relate an entity with Email From field
                activityPartyFrom.PartyId = {
                    Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238",  // id of entity you want to associate this activity with.        
                    LogicalName: "contact"
                // Set the "activity" of the ActivityParty
                activityPartyFrom.ActivityId = {
                    Id: result.ActivityId,
                    LogicalName: "email"
                // Now set the participation type that describes the role of the party on the activity).
                activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
                // Create the from ActivityParty for the email
                SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
                var activityPartyTo = new Object();
                // Set the From party of the ActivityParty to relate an entity with Email From field
                activityPartyTo.PartyId = {
                    Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238",  // id of entity you want to associate this activity with.        
                    LogicalName: "systemuser"
                // Set the "activity" of the ActivityParty  
                activityPartyTo.ActivityId = {
                    Id: result.ActivityId,
                    LogicalName: "email"
                // Now set the participation type that describes the role of the party on the activity).    
                activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
                // Create the from ActivityParty
                SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
            //ActivityParty From Callback
            function ActivityPartyFromCallBack(result) {
            //ActivityParty To Callback
            function ActivityPartyToCallBack(result) {
                GetReportId('ABM_Infotech_SalesQuote');
            //Create attachment for the created email
            function CreateEmailAttachment() {
                //get reporting session and use the params to convert a report in PDF
                var params = getReportingSession();
                //Email attachment parameters
                var activitymimeattachment = Object();
                activitymimeattachment.ObjectId = Object();
                activitymimeattachment.ObjectId.LogicalName = "email";
                activitymimeattachment.ObjectId.Id = email.ActivityId;
                activitymimeattachment.ObjectTypeCode = "email",
                    activitymimeattachment.Subject = "File Attachment";
                activitymimeattachment.Body = encodePdf(params);
                activitymimeattachment.FileName = "Report1.pdf";
                activitymimeattachment.MimeType = "application/pdf";
                //Attachment call
                SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
            //ActivityMimeAttachment CallBack function
            function ActivityMimeAttachmentCallBack(result) {
                var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
                var width = "800px";
                var height = "600px";
                window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
                // To open window which works in outlook and IE both
                //openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width,
    height, features);
            //This method will get the reportId based on a report name that will be used in            getReportingSession() function
            function GetReportId(reportName) {
                var oDataSetName = "ReportSet";
                var columns = "ReportId";
                var filter = "Name eq '" + reportName + "'";
                retrieveMultiple(oDataSetName, columns, filter, onSuccess);
            function retrieveMultiple(odataSetName, select, filter, successCallback) {
                var serverUrl = Xrm.Page.context.getServerUrl();
                var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
                var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
                if (select) {
                    odataUri += "$select=" + select + "&";
                if (filter) {
                    odataUri += "$filter=" + filter;
                $.ajax({
                    type: "GET",
                    contentType: "application/json; charset=utf-8",
                    datatype: "json",
                    url: odataUri,
                    beforeSend: function (XMLHttpRequest) {
                        XMLHttpRequest.setRequestHeader("Accept", "application/json");
                    success: function (data) {
                        if (successCallback) {
                            if (data && data.d && data.d.results) {
                                successCallback(data.d.results);
                            else if (data && data.d) {
                                successCallback(data.d);
                            else {
                                successCallback(data);
                    error: function (XmlHttpRequest, errorThrown) {
                        if (XmlHttpRequest && XmlHttpRequest.responseText) {
                            alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
            function onSuccess(data) {
                reportId = data[0].ReportId.replace('{', ").replace('}', ");
                CreateEmailAttachment(); // Create Email Attachment
            //Gets the report contents
            function getReportingSession() {
                var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
                var retrieveEntityReq = new XMLHttpRequest();
                var Id = Xrm.Page.data.entity.getId();
                var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
                quotationGUID = quotationGUID.replace('}', "");
                var reportName = "ABM_Infotech_SalesQuote"; //set this to the report you are trying to download
                var reportID = "751089AA-74B8-E211-B52F-D8D3855B253B"; //set this to the guid of the report you are trying to download
                var rptPathString = ""; //set this to the CRMF_Filtered parameter
                var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition
    attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
                retrieveEntityReq.open("POST", pth, false);
                retrieveEntityReq.setRequestHeader("Accept", "*/*");
                retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
                rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName="
    +
                                reportName + "&isScheduledReport=false&p:ABMFilteredQuote=" + strParameterXML;
                //remove the part starting from &p:salesorderid if your report has no parameters
                retrieveEntityReq.send(rptPathString);
                var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
                var ret = new Array();
                ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
                x = retrieveEntityReq.responseText.indexOf("ControlID=");
                ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
                return ret;
            var bdy = new Array();
            var bdyLen = 0;
            function concat2Bdy(x) {
                bdy[bdyLen] = x;
                bdyLen++;
            function encodePdf(params) {
                bdy = new Array();
                bdyLen = 0;
                var retrieveEntityReq = new XMLHttpRequest();
                var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
                "&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
                "&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
                retrieveEntityReq.open("GET", pth, false);
                retrieveEntityReq.setRequestHeader("Accept", "*/*");
                retrieveEntityReq.send();
                BinaryToArray(retrieveEntityReq.responseBody);
                return encode64(bdy);
            var StringMaker = function () {
                this.parts = [];
                this.length = 0;
                this.append = function (s) {
                    this.parts.push(s);
                    this.length += s.length;
                this.prepend = function (s) {
                    this.parts.unshift(s);
                    this.length += s.length;
                this.toString = function () {
                    return this.parts.join('');
            var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
            function encode64(input) {
                var output = new StringMaker();
                var chr1, chr2, chr3;
                var enc1, enc2, enc3, enc4;
                var i = 0;
                while (i < input.length) {
                    chr1 = input[i++];
                    chr2 = input[i++];
                    chr3 = input[i++];
                    enc1 = chr1 >> 2;
                    enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
                    enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
                    enc4 = chr3 & 63;
                    if (isNaN(chr2)) {
                        enc3 = enc4 = 64;
                    } else if (isNaN(chr3)) {
                        enc4 = 64;
                    output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
                return output.toString();
        </script>
        <script type="text/vbscript">
        Function BinaryToArray(Binary)
               Dim i
               ReDim byteArray(LenB(Binary))
               For i = 1 To LenB(Binary)
                     byteArray(i-1) = AscB(MidB(Binary, i, 1))
                     concat2Bdy(AscB(MidB(Binary, i, 1)))
             Next
              BinaryToArray = byteArray
       End Function     
        </script>
    </head>
    <body>
        <input type="button" onclick="CreateEmail();" value="Attach Report" />
    </body>
    </html>

  • Run Report from PL/SQL with branch to different page

    I have an application in which, at various points, I run a PL/SQL procedure to perform an action, and then need to run a report while also navigating away from the current page. The actions are executed on a button click.
    I have tried various method, but for the life of me cannot get the system to do both things (ie. run the report and branch to another page). I have tried putting in a branch to page 0 (to execute after processing on the button click), with a request line to print the report, followed by a branch to the other page (also to execute after processing on the button click) - and only the branch to page 0 actually executes. Also tried putting a branch to the other page only, with the print request in the Request parameter - but only runs the report, does not branch to the other page.
    I have also tried to put the call to run the report into the PL/SQL code, using utl_http.start_request(url), but that came up with a "Bad Request" error. Also tried using the owa_util.redirect_url call, but also no luck.
    I am pulling my hair out at the moment, mainly because I am under pressure to deliver the system in very short time.
    Any suggestions would be appreciated.

    You can run Report queries from their URL ( f?p=&APP_ID.:0:&SESSION.:PRINT_REPORT=<REPORT NAME>)
    So an approach would be to
    On Button click, call a JS function that
    <li>1. uses Ondemand/Callback process to do the workflow processing(check box selection records)
    <li>2. opens the Report as a popup window(from your IR page)
    <li>3. Redirect away from the IR page to another page?
    Another approach:
    <li>1. IR report submits the page
    <li>2. In the PLSQL block you do the processing
    <li>3. The branch redirects to a URL which would point to the Report URL.
    OR
    <li>3. Have an onload JS which runs only when the request was the BUTTON request and that opens up a page which points to the report.
    Yet another way would be to use htp.p within the PLSQL block that does the workflow processing
    So your PLSQL code would be
    BEGIN
      --Do the workflow processing here
      --End workflow processing
      htp.p('<script>');
      htp.p(' window.open("f?p=&APP_ID.:0:&SESSION.:PRINT_REPORT=<REPORT NAME>"'); --opens up the PDF report
      htp.p(' window.location.href= "f?p=&APP_ID.:<page number>:&SESSION."');  --to redirect to new page
      htp.p('</script>');
    END;

Maybe you are looking for

  • Video Setting greyed out

    Hi, I'm trying to find a way to control my blacks while digitizing footage in via a component cable and a aja Kona LHE card. I noticed that in the clip settings on the digitize window there are slioders for hue,sat, bright, Contras, black and white b

  • Only half the page is showing unless i go into fullscreen mode

    when i open the firfox page the left side of the screen is blank and the page seems to be too far over to the right the only way i seem to be able to view the whole screen is to go into full screen mode

  • Sync with Outlook contacts.

    Hi everybody. I have trouble whith syncchronizing my iPhone (3GS, 3.1.3) with my contact list on my computer (W7 Integral/Outlook 2007). When a contact is modified on my iPhone (added number for a contact for instance), it is not updated on my comput

  • Assigning the output  type to the shipment number

    hello, can any one tell me how to assign the output type to the shipment number. Ex: ALTR to all my shipment numbers. By default, its taking other output types. Thanks in advance.

  • ActiveX error - treeview control

    Has anyone solved the problem with WIN XP SP2? The error ("Server exception") happens in the second line    AcXTree.ClassID = "MScomctllib.TreeCtrl.2"    oTreeView = AcXTree.Object It works well with any other WIN OS Thanks in advance, Dario