SMA omvormer software.

Ik stuurde SMA benulux het volgende bericht:
Ik ben sinds oktober 2012 de gelukkige eigenaar van 15 zonnepanelen en een Sunny Boy 3600TL-21 van SMA. Een storende kwestie is het totaal niet ondersteunen van Mac OSX door SMA voor het uitlezen van de Sunny Boy gegevens, evenals een eventueel bijwerken van de firmware.
Een gemiste kans voor een bedrijf dat zich profileert als high tech met de blik op de toekomst.
Hoe ingewikkeld kan het zijn om naast een Windhoos programma ook een Mac OSX programma te ontwikkelen. Iemand dwingen een Windhooscomputer te kopen of erger nog de Mac computer te vervuilen met Windhoosprogrammatuur is een regelrechte belediging. Daag uzelf toch eens uit! Als u wacht to de concurrent u uitdaagt is het te laat. Het is ondanks alles een snelle markt: dat moet u toch weten.
Tot mijn verbazing kreeg ik het volgende antwoord retour:
We begrijpen u frustratie hierin. Echter, het ligt toch iets anders dan dat u schetst. Het probleem zit erin dat Apple geld vraagt als er software op hun systeem zal draaien. Dit zijn nogal zeer hoge bedragen. Als we dit zouden doen, zou dit programma niet meer gratis zijn, maar betalend en daar zit u als klant ook niet op te wachten.
Ik weet wel dat ze in Duitsland Apple proberen te overtuigen om dit toch te laten zonder kosten. Tot die tijd dat daar een beslissing in is genomen, zal er dus nog geen versie voor Apple op de markt komen.
Klopt dit? houdt Apple met haar prijsbeleid dit soort ontwikkelingen tegen, en daarmee de gebruikerservaring van hun eigen producten? ik ging ervan uit dat iedereen een App kon ontwikkelen en die zelfs gratis via de store kon aanbieden. Teleurstellend als dit klopt. Overigens ben ik toch niet afhankelijk van SMA? Iedereen zou toch -mits ze voldoende inzage hebben- een programma kunnen ontwikkelen?
Graag jullie visie/ervaringen!

The package formats are not the same between these both release of Solaris. You can still trying to extract the files and then install it in your Solaris 10 machine but this is highly unrecommended and of course unsupported. And I'm not sure that it will work.

Similar Messages

Solaris 10 SMA is dumping core. Have you installed net-snmp?

It's only happening on afew of the many sparc Solaris 10 servers I support. Oracle no longer supports SMA and has suggested downloading and installing "publicly available 'net-snmp' software". I'm reluctant to download and install open source; the review and approval process in my environment is onerous.
Since net-snmp is bundled with Solaris 11, I'm wondering if it is possible to install Solaris 11 packages on a Solaris 10 server (and net-snmp in particular). If so, perhaps someone can provide tips?

The package formats are not the same between these both release of Solaris. You can still trying to extract the files and then install it in your Solaris 10 machine but this is highly unrecommended and of course unsupported. And I'm not sure that it will work.

Can't delete apps after ios 7.0.3 software update

Please help. I cant delete my apps after software update to ios 7.0.3...waited for the new update,but after the ios 7.0.4 update, still the smae.help
Pls

What happens when you attempt to delete an App?
Have you checked Settings - General - Restrictions - Deleting Apps = ???

How to get real time date from Sunny Boy Inverters through SMA Webbox?

Hello,
I was looking on how to communicate with three Sunny Boy Inverters that are linked to a SMA webbox. Currently we get a daily summary of the solar production, but we would like to have real time data uploaded into LabVIEW. The people of SMA said that I needed to use "RS485 protocols" with a software they have called YASDI (http://www.sma.de/en/products/software/yasdi.html); however, I keep finding other information that says that I can communicate with my inverters using the SMA OPC server (http://www.sma-america.com/en_US/products/software/sma-opc-server.html). I also found this forum, http://forums.ni.com/t5/LabVIEW/Sunny-Island/m-p/809129/highlight/true#M368718, where I understood that I don't need to use the OPC server, but instead I can use UDP communication to get the data. I found another forum that talks about using the YASDI :http://forums.ni.com/t5/LabVIEW/help-with-Sunny-Boy-inverter/m-p/293273/highlight/true#M153892.
I've tried to communicate with the people of the forums and I haven't gotten any responses; therefore, I wanted to see if I can get cleared up on this issue. Do I need to use OPC server to communicate with my inverters through the webbox or can I just use UDP in LabVIEW?
Any help would be greatly appreciated,
Thanks
Jose

Hello,
I got a response from Vincezo: http://forums.ni.com/t5/LabVIEW/Sunny-Island/m-p/1794786. I'm currently working with the VI to communicate with the webbox through UDP. Since the PRC protocols to communicate with the webbox are in JavaScript Object Notation (JSON), I'm not sure if the data-in string has to be in JSON format. However, the only error I'm getting is 56 in the UDP read function. I've tried increasing the size of the bytes and timeout, but I keep getting this error. If anyone can help me with this part I would very grateful.
Thanks,
Jose

Solaris 10: SMA + mdmonitor

Hello all!
I have a Solaris 10 system with software raid and SMA conifigured to send traps to a snmp manager.
I want to monitor for any errors, change of state of the raid elements. As far as i have read at the LVM manual only snmpdx can be supported through the mdmonitor. I wonder if there is a way to make it work with SMA(net-snmp). I have looked everywhere but i cant find anything related.
Please help!
Regards

The package formats are not the same between these both release of Solaris. You can still trying to extract the files and then install it in your Solaris 10 machine but this is highly unrecommended and of course unsupported. And I'm not sure that it will work.

My mac's software is only available under my profile on MacBook pro. How can other family members get to the optional SW logged in under their own profile

Is there a way to share purchased SW under mote than one profile on the MacBook pro?
Thanks

If the software is in the HD>Applications folder it's available to everyone. If for some reason you put software into User>Applications folder it will be available only to that user.

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera R

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!

Did you fix your issue? I am having the same one

Adobe Cloud Which Software does it come with

With Adobe Cloud Which Software or apps does it come with?

All Cloud Applications: http://www.adobe.com/creativecloud/catalog/desktop.html

Step-by-Step Help Needed for Deploying Some Adobe Software

We are a K-12 educational institution. I am currently working at setting up a computer lab with about 16 MacMini computers.
I'm VERY new to the realm of servers, deployment, using terminal, etc.
I've done lots of research to make it to where I am, but just can't wrap my head around what needs done next with the Adobe products.
I am using Server OSX (v3) and DeployStudio (v 1.6.3) to try and manage the computers.
Both my server and clients are running Mavericks 10.9.
I deployed my core images successfully and would like to now send Adobe products only the computers I choose since I have limited licenses.
We have volume licenses of Adobe InDesign CS6 and Photoshop Elements 12 that we would like to deploy.
I have been referencing the following sites, but just can't seem to wrap my head around the EXACT steps that need to be taken.
http://blogs.adobe.com/oobe/2010/10/adobe-provisioning-toolkit-enterprise-edition.html
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s2.html
http://forums.adobe.com/message/5781663
For Adobe InDesign CS6 - I've done the following:
Created an "Installation Package" using Adobe Application Manager Enterprise Edition (AAMEE v6.2.112.0) using the following instructions.
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
If I log into the client computer, put the package ON the client computer, and run it...it takes me through the install and works wonderfully.It's not automated like I wanted/thought I set it up to do. I have to click through the steps of the installer.
If I try to deploy it using the "Package install" Workflow in DeployStudio...it loads it during the workflow, then skips through it, acts like it installed it, but it isn't actually installed.Is there a setting that I need to possibly change somewhere?
For Adobe Photoshop Elements 12 - I'm a bit lost and mostly just have questions:
I know that I can't use AAMEE and need to use APTEE (Adobe Provisioning Toolkit Enterprise Edition).
How do I deploy the software? Create my own Package using PackageMaker?
Which computer do I run APTEE on? All the instructions I can find just say, "do this" - but don't specify where.
Do I have to open terminal and run the commands on each client computer AFTER installing PE12?
OR
Do I run the commands BEFORE deployment on my package stored on my server that is ready for deployment?
It really comes down to me just not 100% understanding how APTEE works.
I hope that pertrays my dilemma. I've tried to explain best I can. If you have any questions - let me know!
Thanks in advance for any insight you can give!

We are a K-12 educational institution. I am currently working at setting up a computer lab with about 16 MacMini computers.
I'm VERY new to the realm of servers, deployment, using terminal, etc.
I've done lots of research to make it to where I am, but just can't wrap my head around what needs done next with the Adobe products.
I am using Server OSX (v3) and DeployStudio (v 1.6.3) to try and manage the computers.
Both my server and clients are running Mavericks 10.9.
I deployed my core images successfully and would like to now send Adobe products only the computers I choose since I have limited licenses.
We have volume licenses of Adobe InDesign CS6 and Photoshop Elements 12 that we would like to deploy.
I have been referencing the following sites, but just can't seem to wrap my head around the EXACT steps that need to be taken.
http://blogs.adobe.com/oobe/2010/10/adobe-provisioning-toolkit-enterprise-edition.html
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s2.html
http://forums.adobe.com/message/5781663
For Adobe InDesign CS6 - I've done the following:
Created an "Installation Package" using Adobe Application Manager Enterprise Edition (AAMEE v6.2.112.0) using the following instructions.
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
If I log into the client computer, put the package ON the client computer, and run it...it takes me through the install and works wonderfully.It's not automated like I wanted/thought I set it up to do. I have to click through the steps of the installer.
If I try to deploy it using the "Package install" Workflow in DeployStudio...it loads it during the workflow, then skips through it, acts like it installed it, but it isn't actually installed.Is there a setting that I need to possibly change somewhere?
For Adobe Photoshop Elements 12 - I'm a bit lost and mostly just have questions:
I know that I can't use AAMEE and need to use APTEE (Adobe Provisioning Toolkit Enterprise Edition).
How do I deploy the software? Create my own Package using PackageMaker?
Which computer do I run APTEE on? All the instructions I can find just say, "do this" - but don't specify where.
Do I have to open terminal and run the commands on each client computer AFTER installing PE12?
OR
Do I run the commands BEFORE deployment on my package stored on my server that is ready for deployment?
It really comes down to me just not 100% understanding how APTEE works.
I hope that pertrays my dilemma. I've tried to explain best I can. If you have any questions - let me know!
Thanks in advance for any insight you can give!

How to find licence number to activate software ?

I have just bought the Adobe creative Cloud for enterprise.
I had download the creative cloud and now each software is asking for a licence number but I can't find it.
And I have no acces to Adobe Licensing website to get one.
Can you help me?
Thanks.

Hi Berengere,
Welcome on the Adobe Forums!
There is no serial number needed to activate the Creative Cloud, the Adobe ID will be used to activate the product.
As the product mentioned is Cloud for Enterprise, you have to verify first if your Adobe ID (email address) has been assigned to the user rights.
You will find more information in the following link: http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html
If you have already proceeded the the previous steps, please try the steps below then:
1. Clean Up cached user login information
Close the Creative Cloud application.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE
Delete the opm.db file.
Launch Creative Cloud.
2. Reset the Hosts file
Windows
Choose Start > Run, type %systemroot% \system32\drivers\etc, and then press Enter.
Right-click the hosts file and select Open. Select Notepad for the application to open the hosts file.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference Adobe (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Mac OS
Log in as an administrator to edit the hosts file in Mac OS.
In a Finder window, choose Go > Go To Folder.Type /etc.
Select the hosts file and open it.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference Adobe (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Please, let us know how it goes.
Thank you.
Arnaud.

Text delete options since software update

I've recently updated the software to 10.3.1.1565 and a new option appeared for text messaging. when i closed a message and went back to the list of text messages the delete symbol appeared next to the text for a few seconds. This was useful. Now, I have somehow (without knowing i've done it) changed the settings and instead of the delete symbol i'm getting the Reply symbol. How do i change it back to the delete symbol?
Thanks.

After upgrading your stock ROM you always need to do a factory data reset, if your phone doesn't do it for you. Then you can simply choose which sounds you want for the notification in the settings. You can download the Swype keyboard, or several various similar to Swype, from the Play Store. I liked Kii and used it for a long time.

Mid-2009 MBP Has Been Hard Freezing, I think it may be the SSD or software?

Please read this fully so you don't end up suggesting something I've already tried.
I have the Mid-2009 version of the 13" MBP that I received in December 2009. Almost two years ago, I upgraded it to8 GB of RAM and a 256 GB SSD. Everything has been running smoothly until about 2 or so weeks ago. My computer has been having hard freezes, meaning, it's not simply an application freezing up; force quit doesn't work, the clock stops ticking, the whole system freezes. It was very predictable too. Whether i was watching youtube videos with flash, reading online articles without it (I have ad block) or doing something completely non-flash or web related, my computer would hard freeze after about an hour or two or so of use, requiring a hard reset (holding the power button until it turned off and then restarting).
I did some research on this and from what I initially found I thought it was problems with the motherboard. However, I found that to be odd because my motherboard was replaced by Apple in September 2012. I read somewhere to try a system hardware diagnostic test (press D upon start up). On the short hardware test, the one that only takes a few minutes, it passed without any problems. Then I tried the longer hardware test, the one that says takes more than an hour. I put that one on and left it alone. I came back every so often and checked on it and it was fine at first. The mouse responded and the test was showing some measurable progress. However I came back, and at 2 hours 11 minutes and 59 seconds into the hardware test, it froze without completing it.
Then I tried doing something everyone says to do when anything happens: I repaired disk permissions. I did that, and according to Disk utility everything went rather swimmingly. However, that didn't fix anything,in fact, it made things slightly worse. Ever since I reset disk permissions, everytime I open Safari, it freezes immediately, and that has only happened since I repaired disk permissions. My home page is about:blank, if anyone was wondering. I've only discovered this happening with Safari as of now. I switched Chrome as my primary web browser for now.
Being the resourceful person I am, I tried to isolate the problem. My sister, luckily, has an identical MBP. First, using target disk on my computer, I booted my SSD onto her computer - this is to see if the problem was HDD/SSD related or motherboard related. When I booted my SSD onto her computer the same problems occurred: Safari froze upon start up, and then computer would hard freeze after about two hours. However, when I booted her HDD onto my computer via target disk, there were no problems. Safari opened just fine and I used her computer for several hours without issue.
At this point, I was pretty sure it was the SSD, but I thought it was possibly a bad Sata cable or something. But nope. Last night, I switched harddrives completely. No target Disk. I put my SSD in her computer and put her HDD in my computer. I got the same results as target disk. It can't be the motherboard or memory, because both computers worked fine with my sisters harddrive. Only the computer booted off of the SSD would have these problems.
At this point I think it could be two possibilities
A) Either the SSD itself is starting to become defective
B) Some software component of my SSD is buggy
I think it could be something software related because why would Safari and safari only freeze after launch, but no other apps? Also something of note, these problems were happening, I tried to see if doing anything with software update would help, updated everything that needed to be updated, and these problems still occurred.
What do you guys think? anyone have an idea of what it could be? Any suggestions of how I handle this? Applecare is expired. I'm considering doing a clean install but I'm not fully backed up yet and I don't want to waste my time and have it not work. But I also don't want to buy a new hard drive or SSD and have it do the same things. And I'm not getting a new computer if the only problem with it is contained within the storage unit, whether that problem is within the software or hardware related.
Responses and suggestions would be highly appreciated, thanks.
EDIT: this information may be of interest: currently have 19.51 GB of available space (out of 256 GB). At one point, about a month and a half or so ago, my storage was as low as 9 or so GB free.
I am running OSX 10.6.8

I have tried making a new user account like you suggested. It fixed the Safari problem; Safari opened and played video just fine. However, the computer still hard freezed after about 2 hours. I am about to back up my computer via time machine after this (hopefully it'll finish before it hard freezes again, I haven't backd up in more than a year). If that doesn't work, I guess I'll have to move folders individually onto an external. I will proceed after backup with a clean install as that is my only other option for now.
However, after a clean install, should I restore directly from time machine? I would think wiping the hard drive and replacing it with what's on time machine wouldn't solve the problem because the inherent corruption is being restored. However, what about just restoring my User folder? What would the process be for getting everything back to normal as quickly as possible? Do you know of any good ways to get my apps and other preferences back to normal ASAP without corrupting anything? Will I have to re-register anything? For example, I have Adobe CS4 that I received from my highschool IT department. I have since graduated, so I don't have the disc or any of the password codes. Would it be risky to restore the application support folder (because that's where the bug may lie)? Or if I just drag just drag apps, would that still work or is the application support necessary too?

Phone not working after the software upgrade

I performed the software upgrade as indicated by the phone in the notifications.
One the phone rebooted, I proceeded to enter my email accounts and it froze on a white screen with a spinning wheel.
I rebooted and it continued to freeze.
I took the battery out, rebooted, still can't add email accounts. It freezes in the setting section. I actually can't change any settings.
If I reply to a text, the screen freezes black.
If I try to reply to an email, the screen says, "Could not display this message"
I have wiped it three times, powered off a billion times and still keeps freezing. The update has been nothing but grief.
Any advice??

Hello 2canoes and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're experiencing issues with your device after updating your software.
It's recommended you contact your mobile service provider for investigation on this matter and to open a support ticket with BlackBerry technical support.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How do i update my software on itunes for an iphone 4

i was told that i could update my ios 7.1 software via itunes...im new to it so idont have a clue of where to start...my phone wont let me download apps until get the update...any suggestions...

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 7.1.x
iPhone 4S                                    iOS 7.1.x
iPhone 5                                      iOS 7.1.x
iPhone 5c                                     iOS 7.1.x
iPhone 5s                                     iOS 7.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 7.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 7.1.x
iPad 3                                          iOS 7.1.x
iPad 4                                          iOS 7.1.x
iPad Mini                                      iOS 7.1.x
iPad Air                                        iOS 7.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

SMA omvormer software.

Similar Messages

Maybe you are looking for