Small list,big problems

1. Can't use punch on the fly. Too tired of this one to bother recounting the lame, sorry assed tale by now. Solution - I have no option but to use Cubase if I want any kind of reliable overdub.
2. Midi sync - oh, where would that be now that Apple have "upgraded" Logic? All over the place, that's where. Tried sync'ing any external units which require midi clock recently? Logic6 did it flawlessly, as does Cubase. Logic7 loses the groove every time. Solution - don't use external gear.
3. ES2 won't sync when recording another track. Set to play a 16ths LFO the groove more often than not falls over when I record any other track. Solution - never use ES2 again.
4. Pointer in event editor doesn't correspond to the note just played. Solution - consign yet another piece of Logic's arsenal to the bin, never to be opened again.
5. Follow tempo - thanks, if I ever need to sound like Donald Duck being sexually abused I'll know which box to tick.
Great in Logicland these days, innit.

The site generated by Muse is being uploaded to https://www.ltcpcms.com/rxconnex/. It's then being presented at www.rxconnexttoday.com inside a frameset. The frameset will interfere with the ability for the site to correctly detect the size of the device screen. This frameset needs to be removed. If you load https://www.ltcpcms.com/rxconnex/ on your devices the phone site will resize correctly.

Similar Messages

Small list of problems (4.0.2??)

I have an iPhone 4 and I upgraded to 4.0.2 pretty quickly. However, I've noticed a few issues since then:
-- MMS sending is hit or miss, but mostly miss. I've tried to send 3 pictures today. So far, 1 has sent. And sending more than 1 per message ain't happenin (I'm on Edge, so maybe its a resolution thing with the old network?). MMS video is completely out of the questions -- tried to send one last night and it refused to go through.
-- Email notifications: they aint working with Yahoo. I disable my Exchange account on the weekend, which syncs fine. Yahoo hasn't synced at all this weekend. I assume it worked fine during the week because Exchange was active and so the mail client in the phone would also look for my Yahoo mail?
-- I've had a case on my phone since I bought it. If i pick up my phone since the update (again, with the case on) I still drop bars. If it sits stationary, its fine.
Any thoughts? I know that I'm getting a new phone soon (my sim card won't eject), however, I'm waiting on redeeming that until I know for sure I'm keeping it. Last week I had some major service issues with AT&T, and I have to have a phone for work so if I can't keep service the phone is going back and I'm canceling. But once I'm past that point, I'm getting it swapped for a replacement (at least per the Apple rep I talked to last week).

I have an iPhone 4 and I upgraded to 4.0.2 pretty quickly. However, I've noticed a few issues since then:
-- MMS sending is hit or miss, but mostly miss. I've tried to send 3 pictures today. So far, 1 has sent. And sending more than 1 per message ain't happenin (I'm on Edge, so maybe its a resolution thing with the old network?). MMS video is completely out of the questions -- tried to send one last night and it refused to go through.
-- Email notifications: they aint working with Yahoo. I disable my Exchange account on the weekend, which syncs fine. Yahoo hasn't synced at all this weekend. I assume it worked fine during the week because Exchange was active and so the mail client in the phone would also look for my Yahoo mail?
-- I've had a case on my phone since I bought it. If i pick up my phone since the update (again, with the case on) I still drop bars. If it sits stationary, its fine.
Any thoughts? I know that I'm getting a new phone soon (my sim card won't eject), however, I'm waiting on redeeming that until I know for sure I'm keeping it. Last week I had some major service issues with AT&T, and I have to have a phone for work so if I can't keep service the phone is going back and I'm canceling. But once I'm past that point, I'm getting it swapped for a replacement (at least per the Apple rep I talked to last week).

Bug with Lightroom 4? - Big problem in the keyword list!!

Hello guys,
I am Rafael Rojas, a nature and landscape photographer. This is my first post, trigered by a quite bothering problem I am having with my LR...So hello everybody!
I upgraded to LR 4 a week ago. Today I realized many of the keywords I have installed in Lightroom do not appear on the keyword list (basically all keywords after the letter S). Moreover, half of the keywords which appear on the list are not editable: that is, I cannot assign them to the selected image (by clicking on the left box), or I cannot double click them or right click them to get the Edit panel. All the rest of keywords (those which appear on the list on top), can be edited and there is no problem.
When I export the keywords as a .txt file (in metadata, export keywords) I can see that all the keywords are there. When I try to write some of them on the box LR recognize them and adds them automatically. However, I just cannot see them on my keyword list or just cannot edit them.
The reason I want to edit the keywords is because many of them got desactivated while upgrading (something more people have reported). Right now, I cannot send my images to my stock galleries, since many of my important keywords are not active, and I just cannot edit them...
Can you help me please?
thanks so much!!
rafael

Well, 64 bits.
And yes, it seems when I erase one keyword, the list "shows" one more below...so it seems the problem is related to a certain limit in number.
That would be still a problem I could live with, the big problem tough is that many of the keywords got "deactivated" alone by Lightroom (see problem here described http://www.backyardsilver.com/2012/02/strange-behavior-with-capitalized-keywords/) and that means I NEED to edit some keywords which are really important and which are not active. Otherwise, when I export the images those keywords are not embedded...
Any thoughts?
Rafa

I have a big problem. Every time i lock on for example Facebook, the picture is big in 2 secundes and the it's gets small. Please help me.

I have a big problem. Every time i lock on for example Facebook, the picture is big in 2 secundes and the it's gets small. Please help me.
<Email Edited by Host>

Hi Frank,
Which Browser, & do you have a screenshot of the problem?

Small problem led to big problem

I had a few contacts that existed on my Centro which did not exist on my desktop. So I contacted the Palm Chat Support. The person who helped me had me perform several things which eventually led to my phone getting stuck in a loop. Things were not getting better so I asked to be transferred to a supervisor. The supervisor told me the only solution was a hard reset. I finally agreed to this. Now when I reinstall any applications (not third-party) such as calendar or address book, my phone won't come on. I can see the calendar or the address book but when I go to turn on the phone, it goes back into the endless loop. A soft reset will not take it out of the loop, only a hard reset. When I do a hard reset, I then have the ability to use the phone again but I have no data in my calendar, address book, etc. So essentially I have either a PDA or a Phone--but I can't have both. This started as a very small problem (a few missing contacts which I could have probably/should have probably just manually entered into the desktop). Now I have a very big problem, simply b/c of what I was directed to do by Support. Is there any hope?
Post relates to: Centro (AT&T)

There could be to issues going on here that you are having this result. One thing could be corrupted data such as your contacts or calendar, the other could be corrupted programs that are coming back from a hotsync.
The first I would like to troubleshoot as it is the easiest. To fix this what we need to do is hard reset your device. The instructions to do that is here http://kb.palm.com/wps/portal/kb/common/article/887_en.html this tells you how to do all types of resets. Also, what we need to do is rename your backup folder. What this folder is, it hold all your programs from the last time you synced your PC. On your computer go here
Palm Desktop 4.2 and below
My Computer--> C drive --> Program files --> Palm/PalmOne--> your hotsync username
Palm Desktop 6.2.2
My Documents/Documents --> Palm OS Desktop --> your hotsync username
Right click on your backup folder and rename it to "backupOld". Resync your device to the same user name and you will get all your contacts, calendar, tasks, and memos.
You can install the programs again but make sure they are compatible with the device. Also try one program again and wait 24 hours to see if the same thing happens again. This way you know what program is causing the issue.
If you have any questions about this or if this does not work please post back.

Is this a big problem or one that will go away? Small lines on screen

I have a row about 2 or so pixils big, halfway across my screen. You can barely notice them on the background, and I dont notice them when I move my safari window over it. But I have changed my desktop background to different things, solid colors, photos, random photos apple had in there, and the lines were still there.
It is about 4 rows, very thin, different lengths, right side, just below the center of the right side of the screen.
Is it the beginning of a big problem? I was thinking of calling up applecare then going to an apple store to have the screen replaced.

Thanks. I will back up my data this wednesday, install snow leopard on friday (i doubt it would do any fixing... want to see it though, cant wait to install it :P). Then on the 8th I will schedule an appointment and go to the apple store. That way I can make 1 trip. I plan on getting my ipod touch replaced, the battery for some reason doesnt hold a charge too well, last night on wifi the youtube app drained 25% in 20 minutes.

Hi, I have big problems since 2 weeks with outline, fonts, size in Ai CS6 : Numerical value are so big

Hi, I have big problems since 2 weeks with outline, fonts, size in Ai CS6 : Numerical value are so big and I can't change it with smaller. Apparently Ai said me that comes from AiPrefs... Could you help me please.
I tried to initialize my preferences but nothing change.
PS : Sorry for my English, I'm French
Pierre

Pierre,
You may try the list and see how far down you need to go; you have probably been through 1) and 2), and 4) is both reversible and more thorough than 3); 5) is hardly relevant, so you may end up with 6).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

One Apple ID two phones big problem.

Hi guys,
Before 6 months I bought new Iphone 4s,but it was used one day from person who sell it to me, so it already has Apple id.
I deleted user and created my user which was synced with iCloud and worked without any problem.
Before 10 I bought Iphone 5, also created my Apple ID on it and sync with my PC/ iCloud.
Yesterday I want to sell my first Iphone 4 and I did reset ( Erase all content and setting), but it did not want to wake up, so i started it with DFU mode using I tunes, and I did restore and update.
Now I am facing to bit problem, on the begging steps it says something like "this apple id cannot be used to unlock this iphone".
If I go to iCloud I can see only one device and currently its new iPhone 5, but both devices called with same name, so I am not sure is this problem.
So I have two doubts:
- I am not sure does SIM card can make this problem(on initiation phase you have to put sim in Iphone), because main is much smaller now so I using my wife SIM to finis registration Iphone 4 (iPhone 5 using smaller than iPhone4)?
- another thing It says you have to "use original apple id..", like I sad on the beginning when i bought Iphone4 it already has apple id on it, which I was deleted and configure main (afterwards this device was visible on my iCloud). So do I need to put first creaded apple id, does iPhone remembering first created or last used. If yes I have big problem because I dont have contact of user who sell it to me.
I want to add one thing, Iphone is not stolen I have warranty documentations and all profs that is not stolen.
PLEASE HELP, in my country we have awful support !

Just left the Apple store with an official answer. You can have two phones one Apple ID, turn off auto updates so you don't automatically get apps on both phones. Then you need two different iCloud accounts.

Long List of Problems and no one will help!!!

I have had NOTHING but problems with this phone since the sales clerk talked me into buying it. I've had it for a little over a year and a half. It's had "Software" issues out the rear and it's been replaced and still has the very same issues. YET I can't swap it out with another phone without paying through the nose for a new one. Verizon sold me a phone that does not work completely. Verizon keeps replacing it with the same phone and numerous Verizon employees keep telling me that this phone has MANY known issues, LOTS of complaints. Yet I am still stuck with a phone that is barely useable. I am so disgusted right now.
Here is just a SMALL sampling of issues with my phone and I am still being denied a new phone unless I want to pay $600. I have 4 weeks until I can "Upgrade" and I still can't even get an early upgrade. I have been VERY patient waiting for my "TWO YEARS" to be "UP" so I can upgrade without being robbed. This in addition to suffering through the Black Berry Storm that SUCKED and was replaced 7 times in a year and a half period due to "Software issues" I will admit, two of those replacements were my fault - one got wet and the other was stolen, but still, 5 replacements is not acceptable. Then I went to buy my new phone (Glory day for me) then I get talked into this Fascinate and it's just as bad as the Storm was, if not worse. I can't seem to win. I have decided to go for an iPhone.
Here is my list of problems and NO one can fix them, no one can help, I get told that this is a known problem yet Verizon won't take care of their customers that got screwed by this phone. I've been a loyal customer for 7 years. I love the actual cellular service, I rarely get dropped calls, which is why I stick with verizon, but I am seriously considering jumping ship, because even though I'm loyal, I buy my phones through them, I can't get support.
The SHORT LIST of problems that makes this phone 100% unacceptable:
1) Can't text 3/4 of the time because a little grey box pops up in the text box and it won't accept anything I type into it.
2) Have not been able to send picture emails for several months now - Verizon can't figure out why. My husband misses out on a lot of pics of our kids, I like to text him fun pics of them doing things or when we are on vacation without him.
3) phone freezes up on a regular basis. Several times a day. I have to pull the battery out and reboot.
4) Sometimes I can't answer the phone when it rings - the phone rings and when I slide the puzzle piece to answer the phone, it freezes and continues to ring long after the person has hung up and the only way to get it to stop ringing is to pull the battery out and reboot the whole thing.
5) a LOT of times, people will call my phone and it won't ring - it goes straight to voicemail. I have had people call me when they are sitting right next to me and it doesn't ring (and yes, I've checked the volume, it's on, the phone is on) sometimes though, it rings and I actually can answer it, but lately, it's becoming more and more of a problem being able to receive and actually be able to answer them
6) I can't use Facebook. It takes forever to actually get into FB and when I do, it only shows about 5 posts before it freezes. A few weeks ago, I could post to FB but only here and there, now I can't post from FB from my phone at all. I know that's likely due to the APP - but FB on this phone has always sucked.
7) At home, even when I standing next to my wireless router, it says I have "Lost Signal", yet all of my other wireless devices work from 5400 square feet away, on the other side of the house, upstairs. Even when I'm standing in the Verizon store, it says "Internet Connection Lost" It is so frustrating. I am a busy mom and I have 5 minuts to myself and I can't even check FB or browse on the internet and yes, I have checked, all of my connections are set up correctly. My wireless is enabled on my phone. But it still doesn't work.
8) Email - it's constantly refreshing, even though I have it set to only refresh once and hour. I think I even changed it to once a day. Instead, that little "refresh wheel" spins constantly on my phone and while this little refresh wheel spins, I can't read email, I can't write email and I can't send email. When it finally stops and I open an email and the try to respond and write back, that little refresh wheel starts spinning again and then I have to wait until i can get home to a real computer to actually read & Respond to email.
9) Calendar inputs the wrong time. I had a dentist appt at 9:30am. I set it as 9:30am. When I saved it, it changed it to 10:40am. I went back into the calendar function to change it thinking I had input the wrong time, but no, when I went to edit it, my 9:30 time was set, I hit save again and saving it changed it to 10:40. WTH? I can't even rely on the calendar function.
10) Two weeks ago, I woke up, looked at my clock, which I also rely on as an alarm clock. The room was dark. The clock said 5:30am. But for some reason, it felt later. Sure enough, I get up, check my husbands alarm clock, it's 7:30am. I am so thankful I had a gut feeling and looked at another clock. I did not change my time zone on my phone (in fact, I went looking for Time change stuff and I couldn't even find it. Then two hours later, the phone went back to normal time all on it's own.
11) Text messages occasionally pop up and it tells me it's from Jay Smith (Not real name) and when I open the actual text, it's from Sarah Jenkins (not real name) WTH? How am I supposed to rely on text if its confused itself?
12) Phone shuts itself off all the time, several times a day. All of a sudden I will hear the musical tone of my phone shutting down and then at some point, it will turn itself back on. When I turn it back on, it resends out old text messages (See below)
13) Text message randomly sends out old text messages to people that I sent text messages out to months ago. So the people will text me back saying "WTHeck is this about?" and I look and it's an old text message I sent them a month or two ago. It usually does this when the phone freezes, shuts itself down and restarts. I have found out that IF I delete my text messages timely, then it won't resend out any old text messages, but I am not very good about deleting stuff and often times, text message contains some important information that I haven't yet had the time to copy down and save. I shouldn't HAVE to delete my text messages so it doesn't randomly send out text messages to people.
14) Often times, I will send out a text message and it will fail to send the message and I get a text message saying my text message has failed.
I could go on, but I think that will give sufficient evidence that this phone stinks and that Verizon should give people owning this phone a chance to get a new phone without raping their wallets.
Maybe someone here will listen? Because no one at the store does... I pay for Verizon service that I barely even get to use because my phone doesn't perform like the guy who sold it to me told me it would.
CAN YOU HEAR ME NOW????

About the only thing I can say is to keep going to Verizon, or calling customer service to get them to look at the issues. I talked to 1 rep that told me to dial either 4# symbols, or 4* symbols (Can't remember which it was) after I got the VM message but did not have the phone ring, so it would mark my account record and they could search and troubleshoot the issue.
As far as your upgrade, I think you have done the right thing so far, and that is signing up on this forum, that way you can look at the different phone forums and see what issues that people are having. Talking to people that have the phone is a great way to find out what the issues are. Verizon Sales reps will only sell you the latest and greatest, or if there is something that they are being told to push to get out of stock.
Going with an iPhone is ok, just make sure it is correct for you, because like you said earlier, once it is done, it is done and you are stuck with it for 2 years. I had a friend who made a knee-jerk reaction to a bad phone, and did the same thing. They regretted it after 6 months. I am not saying the iPhone will be bad for you, just make sure you do your homework.

Big Problems with Vista and Audigy

Hello.
My name is Jana and I'm from Germany. This board is my last hope now.
I have big problems to use my audigy 2zs in Vista Business (32 bit).
I use the latest driver from 9.3.07.
The installation process works fine and I get no errors. But I can't start the AudioConSole . I always get an error, that no audio device was found (error message is german)?!? The device manager shows no problems and the audigy 2zs is correctly listed.
I need this AudioConSole to activate the 5. speaker settings. In the sound preferences in Vista is that not possible.
My speakers also need the creative software from cd to activate the bass, but I when I install this software and then restart, only a few programs are installed (but they don't work). I need especially the speaker settings but there is unfortunately no way to install this software.
I did this procedure at least 5, 6 or 7 times, but it always don't works.
So please can you help me?
Sry for my bad english.

Hmm... Try to redownload the drivers from the website, because Creative has updated them to include a proper signature. It is possible that the drivers do not load if they are not signed, which would explain why the AudioConsole does not launch. Also, Windows Vista does the Bass redirection by itself:? If you select 5. speakers from the standard Control Panel, you will be asked whether you have satellites or full-range speakers. Selecting satellites means that the lower frequencies need to be played by the Subwoofer instead. If that still doesn't work, you can do the following:? Extract the downloaded drivers using WinRAR (or similar) (right-click and then extract). Then go to the Subfolder "Drivers\wdm\common\i386"? and run "CtPanel.exe". From there going to the speakers tab there is a "BASS-M" option...

TCS2/RH 8 HTML PDF List Indent Problems

Hi,
We are in the process of converting a; number of projects from RH X5 HTML to RH 8 HTML (installed as p/o TCS2). We use Windows XP and Word 2002. Things have gone 'reasonably' well, but we are having problems getting to the desired point with PDFs.
With RHX5, we use custom CSSs and a custom *.dot file. It works exactly as expected, controlling indents, bullets, and numbers properly.
For theRH8 conversion, we modified the CSSs, using 4 RH 8 multilevel lists to define a number list and 3 levels of bullet lists. The CSS styles are mapped to the equivalent styles in the original *.dot file, which we did not modify at all. The CSSs and *.dot are stored at the root level of the project directory.
When we generate PDFs:
We receive a number of error messages saying that Word cannot save normal.dot b/c it is open somewhere else.
Bullet lists are not indented, all levels of bullet lists are aligned to the left margin.
In the generated Word document, the bulleted list items are in the Normal paragraph style, but bullets are included. They should be in ListBullet1, etc. It appears they were changed to Normal and inline formatting was applied.
In the Word file, under Tools -> Templates and Add-ins, under Document template, our *.dot, with the expected path, is listed as the template. Under Global templates and add-ins, PDFMCustom.dot is listed. We don't know where that came from, and if we delete it it comes right back when we generate.
Do you have any ideas about why the CSS + *.dot method is not working as expected?
We have the same problem using other configurations for PDF outputs, such as using project styles, and using the RH style mapping dot file.
Thanks,
Mike

Peter,
Thanks for your response. I did some additional research and testing, and I don't see an answer to the issue that doesn't involve inline formatting. I didn't test that, because inline formatting is not acceptable to our team - we need the consistency of defined styles.
There is a terminology error in my original post:
"For theRH8 conversion, we modified the CSSs, using 4 RH 8 multilevel lists to define a number list and 3 levels of bullet lists. "
We are not using multilevel lists, we are using paragraph styles with bullet or number formatting included.
The print wizard seems to allow mapping the paragraph-based list styles:
However, in the Word doc that is generated as part of the PDF process, the associated paragraphs are styled 'Normal" instead of the the selected list styles.
Below is a CSS snippet of two list styles and their associated rh-list statements.
Thanks for any suggestions.
Mike
p.ListBullet {
font-size: small;
list-style: rh-list;
x-list-class: rl-P-ListBullet;
/* x-list-level: 1; */
font-family: Arial;
text-indent: -25pt;
margin-left: 30pt;
background-color: Transparent;
P.ListBullet2 {
font-size: small;
text-indent: -12pt;
margin-left: 48pt;
font-family: Arial;
list-style: rh-list;
x-list-class: rl-P-ListBullet2;
x-list-level: 1;
rh-list.rl-P-ListBullet {
x-level-count: 1;
x-lvl-1-format: "<x>";
x-lvl-1-type: disc;
rh-list.rl-P-ListBullet2 {
x-level-count: 1;
x-lvl-1-format: "<x>.";
x-lvl-1-type: square;

Helloo! I have super big problem with my Air.

Helloo! I have super big problem with my Air,10.8.5 ,it asks every 10 sec to make some changes and asks me for password all the time!! I cant acces my documesnt,pics,music,NOTHING at all! Finder is not working,i cant open any folder,icons are missing also,i cant open any of them,mozzila,chrome..im really going crazy.. i updated tonight my phone on new IOS 7 through my comp,cant be that i messed up everything because of that..this comp.is like 10 days old.
btw. i created new user,and everything is working ok.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Big problems with slideshows

Hi, I've a big problem with iPhoto (and Aperture too, but I'll say later).
Two days ago I was creating a small slideshow (18 pictures) and everything was fine. Suddenly, while I was looking for a theme, switching between 3 of them, iPhoto stopped to work. No ESC, no key, I had to restart my iMac, turning it off.
From this moment every slideshow I select, iPhoto stop to work and need a force quit. So I restored a library, from Time machine, but nothing changed.
So I bought Aperture, but nothing changed, using iPhoto Library.
Now I've created an Aperture Library, importing in it my old iPhoto Library. Is there any way to "clean" iPhoto, reinstalling it from new? Do I need such a action?
Thank you and best regards.

That means that there is something in your account that's the culprit. First try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that fails it might be another preference file that's causing the problem. Here's how to test for that:
Trouble Shooting Preferences
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
1 - close all applications.
2 - open your Home/Library folder and Option-drag (copy) the Preferences folder to the Desktop.
3 - select the contents of your Home/Library/Preferences folder and drag them into the Trash bin in the Dock. You will be asked to provide your Admin password.
4 - reboot.
5 - run the application again and determine if the problems is fixed
6 - If the problem is fixed:
A - open the working Home/Library/Preferences folder.
B - Open the Preferences folder on the Desktop, select all of the contents and drag them into the working Home/Library/Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace or Skip button.
D - reboot.
7 - If the problem is NOT fixed, drag the contents of the Preference folder on the Desktop into the Home/Library/Preference folder and replace the entire contents that were created by clicking on Replace.
8 - reboot.
OT

Blank File Icons in Small List View

Hi,
I got an annoying problem with my Mac.
In Finder, it's not going to show the right icons while I'm in the small list view.
If I switch to the bigger list view or the symbol view, everything appears correct.
I just reinstalled Yosemite but it's still be there.
I attached some screenshots.
I hope you can help me.

Here the Screenshots:

Initial Load Setup...Potential Big Problem

Hi All,
I think we have a big problem. I have posted a similiar question before, but answers are confusing to me. Let me explain our current situation and please comment.
1. We are loading billing documents, thus using VDITM.
2. We have 2 number ranges for billing documents.
3. On R3 we filled the setup tables with the smaller number of billing documents. Then in BW ran a full load.
4. The second billing document number range was kicked off in R3 and setup tables filled.
5. Now, here is where I think there is a problem. This second and final load from the setup table was setup and ran as a full load on BW. Shouldn't this have been the Delta Init?
Please comment on this:
I believe this second load should be the delta init. Then after this was done schedule the RMBWV313 job in R3 to run, for us, hourly. In BW schedule the daily delta to run at night (for us). Everything is in sync this way.
My concern is the second setup table load from BW was setup as a Full Load. After this load is done can we just schedule RMBWV313 in R/3 to run hourly and then schedule the Daily Delta in BW to run later that night.
Please comment asap...please.
Appreciate it,
Mike

Hi Mike,
You may be okay! You can run the Init Delta InfoPackage in BW without transferring data, and your delta process would then be set up. If you have the means, check your data in R/3 and verify in BW after a couple of days (couple of delta extracts) to make sure your billing totals match.
The setup tables are only good for doing your initial load (or full load).
Your other solution would be to delete the second full load in BW, fill your setup table with the second range again (to get the new billing data), and then run the Init Delta InfoPackage in BW with data transfer, and you should be set to go.
Let us know if you succeed!

Small list,big problems

Similar Messages

Maybe you are looking for