Smartforms output problem: printer commands are printed on paper

Hi ,
I have created a new page format ( 300 mm * 330 mm ) and i have assigned to a new format in the device type .But what command need to be changed in the printer initialization?
At present when i print my sap script output it prints out the printer commands.
Thanks and Regards,
C.Abhinay

closing

Similar Messages

Output problem: printer commands are printed

Hi ,
I have created a new page format ( 300 mm * 330 mm ) and i have assigned to a new format in the device type .But what command need to be changed in the printer initialization?
At present when i print my sap script output it prints out the printer commands.
Thanks and Regards,
C.Abhinay

closing

Convert the smartform output to PDF when giving print from vf31

Hi Gurus,
I am facing one problem.I developed the program to chnage smartform output to PDF file when giving invoice print from VF02/VF03.
The same functionality i want to appy when i am giving print for the invoice through VF31.
I put the break-point in the driver program.But it is not stopping there when i am giving print from VF31.
How can i do this one..
Please Help Me.
Thanks &Regards,
R.P.Sastry

Which Program you are putting the Breakpoint?

Print commands are disabled in File menu (Multisim 10)

I want to print my circuit, but all Print commands in the File menu are grayed out. I do have a printer installed on my system, which works on other applications. I'm running Multisim 10 (Student Evaluation) on Windows Vista Ultimate 32-bit.
Thanks,
Ricardo Costa

The print option is disable in the evaluation version, it not your printer problem. When you activate this version, the print option will be active.
Tien P.
National Instruments

Print problems only pictures are print not text

Macbook air with caonon mx870.
fonts (text) are not printing anymore only pictures ?

Hello there, marcvdw.
The following Knowledge Base article offers up some great steps for troubleshooting printer issues:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Smartform output problem

Hello all,
     Now I met a problem about smartform output:
     The default printer is LP01. When I execute the program which calls this smartform in background, I change the printer to LP03.
Then I use the t-code:SP02 and find the printer is LP01 not LP03. What can i do change the printer to LP03?
---part of my code:
DATA:
ls_output TYPE ssfcompop.
ls_output-tddest = 'LP03'.
CALL FUNCTION '/1BCDWB/SF00000004'
EXPORTING
   OUTPUT_OPTIONS             = ls_output
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
Thanks in advance!

Hai
try with the following F.M
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING MODE                  = 'BATCH'
              REPORT                = 'MYREPORT'
IMPORTING OUT_PARAMETERS        = PARAMS
              VALID                 = VALID.
look into this link
http://help.sap.com/saphelp_nw04/helpdata/en/d5/6243ea8a4111d4b605006094192fe3/content.htm
You need to set the USER_SETTINGS perameter in your SmartForm to SPACE
Regards
Sreeni

While converting smartform output toPDF: end command // missing in OTF data

Hi,
While Converting smartform output to PDF i am getiing the following error.
end command // missing OTF data . And also in the importing parameter of smartform function module also (job_output_info ) i did not findout the data. Where did i make a mistake. How can i correct this error. Thanks in advance.

Implemented SAP Note 1123505 - OTF-PDF conversion.

Mail quits when APPLE P comand or menu "PRINT" command are given

When I attempt to print from the menu or from keyboard shortcut to print ie an email, Mail quits as if I've done APPLE key "Q". This does not occur in any other application. This happens no matter what user account it is attempted in.

When an application crashes (i.e. quits unexpectedly), the system writes information about the state of the application at the moment of the crash to a log file. That information is called a crash report and makes troubleshooting easier. In order to find and post the relevant part of the crash report here, proceed as follows:
1. Open ~/Library/Logs/CrashReporter/Mail.crash.log. The whole crash log appears in a Console window (you can also open that file with any text editor). It may contain many crash reports. We only want the latest, which is located at the bottom of the file.
2. Look for a line that begins with “Date/Time:” as close to the bottom as possible, and another that says “Thread N Crashed:”, where N is a number. Select everything from the “Date/Time:” line down to (and including) the lines immediately following “Thread N Crashed:”. Copy that text and paste it in your post. Do not post the whole crash log, and do not include anything beyond the lines immediately following “Thread N Crashed:” either, just the relevant part.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

IPhoto freezing on print command before print menu appears

Has anyone encountered iPhoto freezing when selecting "print" from the file menu, before the actual print menu appears? I'm not using huge files here -- 600 KB photo, for example -- but I get the spinning beach ball of death every time I try to print a photo.
I have 3000 photos in my library, use Panther, have a five-year-old ibook with a 10 g hard drive so I house my library on an external hard drive.
Sound like a preferences file problem, for example? Any advice anyone can offer would help immensely.
Thanks!

That's a whole different animal. You didn't move or rename any of the files from the Finder did you?
Do try cleaning out the cache files with OnyX. Also I'd run the 10.3.9 COMBO updater followed by a repair of permissions with Disk Utility. Reinstalling the latest combo updater can clear up a multitude of issues. Finally, is those don't work make a backup copy of your iPhoto Library folder and then launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all of the options except the last one regarding orphans. Do empty your iPhoto library before the rebuild.
If the rebuild doesn't go as intended and is worse than the original library just trash it and go back to the backup copy. Sometimes it's necessary, most times not. Good luck.

Smartform output problem in dunning

Hi
I've done a search for this problem in the forums and found what I thought was the answer but it still doesn't work...
My dunning FM passes paramter IS_SFPARAM to the smartform (which is a copy of the standard SAP form F150_DUNN_SF). the initialisation in the form then calls FM GET_SF_DUNN_DATA in order to populate all the data from the IS_SFPARAM parameter.
However, as far as I can see, inside FM GET_SF_DUNN_DATA, a method is called to populate h_mhnk and use that to check that the parameters like gs_sf_mhnk are populated. If they are not, it raises exception no_parameters_found. I thought the FM set those parameters in the first place! How can I set parameters gs_sf_mhnk, gs_sf_fsabe and all the others in there? i am always getting the no_parameters_found exception at the moment!
Any help appreciated.
Jon

use smartform_trace transaction to trace ur smartform for errors.
also open ur smartform goto environment and get fm name now in the end some number wud be thr like this \...\SF000091 modify it and use it in se38 like this \...\LSF000091F01
it will open the code insert session break points and now check by running the smartform
кu03B1ятu03B9к

Problem sending output directly to a shared printer

Hi.
I am having problems in generating character reports output directly to my printers, my situation is as follows:
We have a Windows 2003 server running an application server 10g and a forms and reports application, if I connect a printer directly to the server my report output is printed perfectly, the problem starts when I try to print from any client machine, since windows does not let you rename a shared printer (it lets you rename the printer in the machine to witch it is connected but in any other machine sharing this printer Windows appends a "on machineX" to the printer name so this poses a problem when trying to pass a desname parameter to reports since it contains spaces.
I solved this issue by adding a local printer to the server machine pointing to a local port that connects this printer to the physical printer in the client machine, this works all right to print from windows (notepad, DOS print command everything prints perfectly). But my reports won’t print. Whenever I send a report to this printer the job gets into the spool but in the status says "error-printing", this only happens when the jobs are sent directly to the printer. If I lookup the job in the reports server queue it appears as correctly finished.
I can even lookup the .txt file from the reports cache and issuing a DOS print command prints the job without issues in my shared printer.
Hope someone can help me out in this one since I am running out of ideas as to how to solve this issue.
Thanks

I forgot one important piece which is why I am asking the question. I am running the report within an Oracle 10g form. I pass all the parameters across to the Reports Server, as seen above. When I run via the PDF option, I just change the DesType to Cache and DesFormat =PDF. When I run with this, it works and displays the report in a new browser window.
I just want to run the report with the exact same parameters but instead of generating a PDF, I want to run the report and send it directly to the printer without previewing it.
Chris

Problem with printer HPLJ 2430N (Printing only one copy)

Hi Gurus,
Here is my problem,
When we are printing to a printer (AAAA) from SAP it is printing out only one copy, even after mentioning to print N number of copies. It is happening only with this printer (AAAA) with all the users.
It is working fine with word & other excel documents
OS :UNIX (AIX)
SAP: 4.6c
Printer model: HPLJ 2430N
I am using access method: U
Devuce type: ZHP2200: HP LajestJet2200 R.4x+
Please help me out to resolve this issue,

Hi Manu,
Goto SPAD. Select the concerned printer in change mode. Goto its Output Attributes. Under Output request processing you will find several options. There will be a dropdown allowing you to pass number of copies to host spool system. Select that and save. After this check again.
Regards.
Ruchit.

Orientation is wrong when delivery note, pick ticket are printed together!

Hi All,
I am facing this peculiar problem.
When delivery notes and pick ticket both are printed at the same time from VL02N, then the pick ticket is being printed in portrait instead of landscape.
The delivery note should print as portrait and pick ticket should print as landscape.But these when printed together from VL02N transaction, the second one pick list is printed as Portrait rather than Landscape.
The spool is generating correctly (DELIVERY NOTE as PORTRAIT and PICK LIST as LANDSCAPE) but when passed to printer both are printing in PORTRAIT format.
The printer settings are same in PRODUCTION as well as QA.In Production system it is working fine but the same settings are there in QA behaving differently.
The printer model we are using is HP Laserjet 4350.
Please advice.
Regards,
Pratyusha
Edited by: pratyushasdn on Jul 12, 2010 4:59 PM
Edited by: pratyushasdn on Jul 13, 2010 7:26 AM

Dear Pratyusha,
Kindly chck on the production and quality system version of the form. The landscape/ potrait option is passed on to the smartform and should be independent of the driver program / Tcode. Kindly chck on it again and revert

What about a print command?

it´s just a small request: a print command.
file > print > go to printer
what do you think?
thanks a lot
kind regards
ps - by the away, edge code is not listed on adobe wish form, sorry if i´m not on the right path.

Hi Ana,
Edge Code is based on the open-source Brackets project, so most future feature ideas are tracked on its public backlog here. You can upvote the print feature here: https://trello.com/c/6mJSwhYU/934-print-source-code. If you don't see a feature listed on the Brackets backlog, feel free to post a request here.
Printing source code is a relatively uncommon use case these days, so we're unlikely to add this feature in the near future. However, as a workaround you can use the Copy as HTML extension to copy the fully color-coded HTML source code of a file (or part of a file), and then paste it into an app like Word to print it from there. To install this extension, go to File > Extension Manager, click "Install From URL," and then enter the URL I linked to above.
Hope that helps!
- Peter

Colors are printing incorrectly when exported to PDF but print fine from InDeisgn and Photoshop

Documents I create in Photoshop and InDesign and export to PDF print in different/wrong colors. The colors are fine when printed directly from Photoshop or InDesign, they look correct when viewing the PDF, but change when printed from the PDF (specifically blues print as purple). How do I fix this?

This really sounds like a color management issue.
How are you creating the PDF files from InDesign or Photoshop? We recommend using the PDF/X-4 settings for proper printing from Acrobat or any direct PDF RIP/printer.
Also would like to know what type of printer you are printing to.
- Dov

Smartforms output problem: printer commands are printed on paper

Similar Messages

Maybe you are looking for