SNOTE problem

Hi Friends,
I have implemented a note thru SNOTE. I want to de-implement the same.
Pls suggest, its urgent please.
Arahanth

Hi
In SNOTE you can select the note applied & click on reset SAP note implemntation.(Ctrl+F2).
Thanks & Regards
Kishore

Similar Messages

SNote - Problems to implement SNotes

Hi,
I have heard about an intrastat problem in a system, after it has been transported to another system in a foreign country.
Therefore I got the task to implement the Sap Note 533586, because in there the point 2 exactly describes the problems, we have.
But I only have impemented small sap notes. In this case, there have to be many other sap notes implemented before its possible to implement that note. Because of that I wanted to impement them automatically by using transaction SNOTE.
My questions:
- Where can I see, if the sap note is already implemented by a new support package. I have asked a basis guy and he told me, that the sap note should be implemented in our package level... But the problem still occurs!
- I´m always getting the message: "SAP Note does not contain valid correction instructions", when I´m pressing the implement button in SNOTE
- Should I download the previous Sap Notes in SNote and implement them seperately before?
Here is the patchlevel of the system. Maybe (hopefully) somebody can tell me, if the sap notes are already included, if I have to implement them, or what else I can do...
System: 46C
All patches between SAPKH46C01 and SAPKH46C48 (08.07.2006)
All patches between SAPKA46C01 and SAPKA46C52 (08.07.2006)
All patches between SAPKB46C01 and SAPKB46C52 (08.07.2006)
Thank You!
Message was edited by:
Arne Hein

According to note 533586, it was included in pack SAPKH46C35.
Do System - > Status, and click on the Component Information button (looks like a magnifying glass) and if it really is at SAPKH46C48, you don't need to apply it.
Try looking for another note

Problem in line INDEX control-current_line.

hi ......i have a problem with following lines of my program for pending order status .
this program runs fine on one client gives a dump on other client at following lines .
plz guide me how can i resolve such problem .
whether its a patches or snote problem .
MODULE READ_TABLE OUTPUT.
READ TABLE itab2 INDEX control-current_line .
*MODIFY itab2 INDEX control-current_line.
ENDMODULE. " READ_TABLE OUTPUT
thanks and regards ,

Hi,
Just try this code , if it does not resolve let us know what exactly is the error message you are getting...
MODULE READ_TABLE OUTPUT.
IF itab2[] IS NOT INITIAL.
READ TABLE itab2 INDEX control-current_line .
ENDIF.
*MODIFY itab2 INDEX control-current_line.
ENDMODULE. " READ_TABLE OUTPUT
Regards,
Siddarth

Import note - enhancement-point

hi,
I would like to implement a note ("992605"). In this note there were some correction instruction (e.g. "ES_MRYF_COMMON_ROUTINES_ALV"; Objecttype ENHS). If I open the link to the object (click on objectname), there are no details what to do. Now what should I do?
If I open the object-link to "MRYF_COMMON_ROUTINES_ALV" in the note, I get the information to delete following line:
ENHANCEMENT-POINT MRYF_COMMON_ROUTINES_ALV_01 SPOTS ES_MRYF_COMMON_ROUTINES_ALV INCLUDE BOUND.
It's an enhancement-point which I can't delete, because it's not modifiable. What should I do?
Thanks Michael

Hello Michael,
As this note is quite complex (it modifies ENHO and ENHS objects) why do you want to implement it manually? If you use the transaction SNOTE, it will be done automatically.
Please implement note 875986 first that corrects all the SNOTE problems.
Regards,
Walter

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. help

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. Please I Need Help

See this Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/nano5gen/
Reset
How to reset iPod

BI 7.0 Infoset query open problem: query_tech_name_Fxx is not a valid char.

Our BASIS transport our BW 3.5 queries to BI 7.0 system. We can open all queries on the BI 7.0 box without problem except Infoset queries. The Infoset is composed of two ODSs and when openning it BI 7.0 query designer, can not see any design element in the panes of Rows, Columns, Free Char. and etc., instead the error msg shows (in between two dashed lines below):
Terminate: query_technical_name_Fxx is not a valid characteristic for InfoProvider [A122(BRAIN)]
Diagnosis
Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers query_technical_name_Fxx as the characteristic to be calculated. 1. is, however, not a valid key figure for InfoProvider .
System Response
The information from query_technical_name_Fxx is ignored.
Procedure
Check the exit.
Procedure for System Administration
We've checked the enhancement RSR00002 and it's components and find they are all the same as our BW 3.5 system. query_technical_name_Fxx is Company Code InfoObj. in one ODS and it's one of the key to join these two InfoSets.
Any idea?
Thanks

hi Kevin,
check if helps following oss note
Note 983449 - Termin A122 1COLUMN no valid characteristic of infoprovider
Symptom
Termination A 122 Brain occurs when you test and generate a query. The system does not recognise the characteristic 1COLUMN.
Other terms
Query, condition, COB_PRO
Reason and Prerequisites
This problem is caused by a program error.
Solution
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.

Why in the world is the most current version of firefox AND flash having TONS of problems playing hulu videos? either chewing the crap out of my processor but playing ok, or chewing the crap out of my processor and not even playing video at all?

used to be firefox and hulu got along just fine, never had my computer get retarded slow or any of the other things its currently doing while there's a tab open with hulu... but here lately its been eating the snot outta my processor (between firefox.exe and plugin container the two are consistently using 100% of my processor... most of it being firefox.exe itself)
and tonight i cant watch hulu at all. the video shows a frame then its another 10-15 seconds before another single frame is showed.
my firefox is the most current version.
my adobe flash player plugin is the most current version.
there's no reason this should be happening but it is happening and its friggin annoying
============================
this happens anytime i'm in the part of hulu that has the player for showing whatever episode i'm attempting to watch. when i attempt to watch hulu i have no other tabs open and no other excess programs running on my computer, and firefox+plugincontainer run my CPU to 100% just between those two processes. i can browse around the internet just fine (like checking my email, or even getting to my queue list on hulu, which i have my homepage set as.. the queue list loads fine but the player part of hulu is when things go to crap)
and i just tried the exact same episode of lie to me that i couldnt watch on firefox.... tried watching it on internet explorer and its playing perfextly fine EVEN WHILE FIREFOX IS OPEN.
firefox is my preferred browser and i hope this junk can be fixed somehow.

Hi John, Sorry you have such problems, but you are in the wrong place for such a discussion.
General Discussions 
If you wish to leave a short comment on Firefox please use
* https://input.mozilla.org/en-US/feedback
If you need more help from Adobe or wish to comment on Flash please consider using their site
* http://forums.adobe.com/community/flashplayer
* http://www.adobe.com/uk/company/contact.html
This forum is not the place for discussing other software or the internet in general. Note even Firefox development and enhancements is considered off topic on this forum. All we do is try to help fellow users with specific Firefox problems.
Your own Firefox Flash Problem ? 
You need to remember that AdobeFlash is proprietary software licensed by a commercial Company. Some of that software may be free to use.
Flash should work well with Google Chrome as it is tightly integrated with that browser.
This forum may be able to help you with Flash Player problems when using Firefox, but any solution will require your assistance and help also.
If you have a problem with Flash Player use on Firefox start by looking at these articles
*[[Flash Plugin - Keep it up to date and troubleshoot problems]]
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you are looking for help with Flash use on Firefox from this forum please say so and I will leave this question thread open, otherwise I will lock the thread as off topic for this forum.

Officejet 8600 Wireless problems

I purchased an Officejet Pro 8600. Had some problems setting up the wireless connection but got it to work after almost one day. it worked for a week and then has topped working. I am using an ipad and a macbook air on the network. It doesnt print or scan wirelessly anymore. Have wasted days trying to fix it together with HP support on the phone. Reinstalled everything and rest everything but to no avail. I took it to HP service center and it worked on their router. I tried to use it with my time capsule and my airport express but it did not work on either of them. Tried a fixe IP as well but didn't work. Tried t print using wireless direct from my Macbook Air but my computer doe snot connect to the wireless direct. I am fed up. Wasted a lot of money on something I hoped would work. Tired of calling HP support and taking the printer to the service center. What should I do? Why won't it work anymore? Why did it work at HP's service center? Please help!

Honestly, it sounds like you may need to get a new router. It sounds like your router is causing all of your issues.
However, if you would like me to try and troubleshoot the issue for you, I can. What version of OS X are you using?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Adobe Document Services logon in transaction snote

I have a NW2004s system with an integrated J2EE stack. I applied SP6 to the Java Engine (w/ Adobe Doc. Services of course) and now my users are presented with a logon/password window for "AdobeDocumentServices/Config" when trying to look at a document in snote. Any ideas of where to look for configuration notes or what this is looking for?
For now I have them hitting F6 to open them in SapScript. Is there a config I can change to set it back so SapScript is the default? A quick check of OSS was not successful.
Message was edited by: Donald Voorhees

Hi Donald,
Did you get any response on this issue. We are having the same problem.
Thanks.

Problem with Table display in Adobe Form of Web Dynpro ABAP

Hi Team,
I'm trying to display a table in Adobe Print Form (not interactive). The table is bound to the context node in the Web Dynpro ABAP where the cardinality is 0:N. I get a short dump. Don't know what to do here. I'm able to display individual fields from my context successfully. Looks like something is missing when I try to display a table. Any pointers to display a data table in Adobe? Any step by step example you know of where I can find out what I did wrong? Many thanks for your time
We are on support pack SP06 on 2004S release.
DUMP INFORMATION:
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program The current ABAP program "CL_WD_ADOBE_SERVICES==========CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "CREATE_PDF" "(METHOD)", nor was it propagated by a RAISING clause.

Hi Thomas,
We upgraded our system(2004S) to SP10 so that we can use the ADOBE form printing in Web Dynpro ABAP but could not apply note 1034425 because of the validity constraints in SNOTE. All the pre-requisite notes are already in the system apart from one note 1029721 which talks about supporting input helps. We don't want to use input helps in our system and cannot upgrade to SP11 because of problems with Business functionality.
Questions:
1) Is note 1034425 absolutely dependent on 1029721?
2) If NOT, can someone please correct the validity so that we can implement using SNOTE.
3) Would it be OK if we manually apply the changes specified in 1034425 without implementing 1029721?
4) If all of the above is not applicable, is there any other note which fixes the above mentioned short dump.
Your help in this matter will greatly help us in using the ADOBE services provided by SAP WDA.
Thanks much

Database termination Problem

Hi every body ..plz help me on this..
We are facing database termination problem in ECC6 production syste.
Database: Oracle 10.2, O/S: Windows 2003. Spam :27, SP level 13.
Error is:
Errors in file f:\oracle\p02\saptrace\background\p02_ckpt_6520.trc:
ORA-00206: error in writing (block 3, # blocks 1) of control file
ORA-00202: control file: 'D:\ORACLE\P02\ORIGLOGB\CNTRL\CNTRLP02.DBF'
ORA-27072: File I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
When we are performing backup then data base termination occuring freequently.
Give right solution as early as possible.
Thanks,
Nani.

Hi,
Have a look at below snote which actually speaks about the oracle error codes
Snote : 546006
within the Snote it says :-
" If you cannot access a database file (for instance a data file, control file or RedoLog) for whatever reason, an ORA-270xx appears. The actual cause comes from additional error messages (usually in the operating system) that occur on ORA-270xx. "
And as per your last update
" ORA-00206: error in writing (block 3, # blocks 1) of control file
ORA-00202: control file: 'D:\ORACLE\P02\ORIGLOGB\CNTRL\CNTRLP02.DBF' "
i think there is problem accessing the database control file. Hence you are facing the above problem.
I think if you recreate your control file i think, it should resolve the problem.
Hope it will be helpful to resolve your problem.
Rgds
Radhakrishna D S

Implementing snote # 746701 for Installing JMS drivers in PI 7.1

Hi all,
We have an issue with JMS adapter and we found an snote # 747601 which is close to our problem.
The snotes have below information.
" You must install the JMS libraries of MQSeries on the SAP J2EE server so that the XI JMS adapter can address MQSeries. For this purpose, Support Package 0 for XI 3.0 contains the aii_af_jmsproviderlib.sda (releases 3.0/7.0) or com.sap.aii.adapter.lib.sda (releases 7.1) SDA file to which you have to add the MQSeries-specific files. In addition, you must extend the server/provider.xml deployment descriptor in the relevant way. Refer to Chapter 9.1 of the XI 3.0 Configuration Guide for more information.
My question is how we will get the .sda file which was given in SAP notes, is it from the suport package download ? i tried from that and i did n't found any thing with this .SDA.
I raised the message with SAP, waiting for there response.
We are on PI 7.1 with windows 2005 server and Sqlserver 2008.
Thanks,
Subhash.G

Hello Subhash
See point 4 of the help.sap.com link [Providing External Drivers for the JDBC and JMS Adapters|http://help.sap.com/saphelp_nwpi71/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/frameset.htm]. Below is the extract:
4. Add all JARs (without path information) that you have defined in provider.xml to com.sap.aii.adapter.lib.sda.
You find com.sap.aii.adapter.lib.sda in directory DATA_UNITS\JAVA_J2EE_OSINDEP_J2EE_INST on your SAP NetWeaver 7.10 PI Java installation DVD.
Re: Path to com.sap.aii.adapter.lib.sda: PI 7.1 - same question asked previously in this thread
Regards
Mark

Problem with V.25 transaction

Hi All
I have problem with V.25 transaction. This transaction contains some variants, and currently my variant dispalying 10 feilds. Now i want to add 2 more feilds to the report. So i went to transaction VOKF and added the two feilds to my variant. But while saving it throwing an error "Total output length (142) is larger than 132 characters". So how we can rectify this error. OR how can we increase report width from 132 char to 150..?
And can u please tell me the way like how we will search for SAP notes or OSS notes for a particular transaction in SNOTE..??
Thanks In Advance
Raghu

hi jayan,
Just read the error in dump what is the problem and where it has been terminated. IF the problem in print progrm check the print program is active or not. If it is active the dump will give the line no where the termincation occurs check the line no in print programme what is the error occured. Once go through the dump analyis and and revert back with acutal problem may then u ll get the required ans.
reward for useful answers
Regards,
sunil kairam.

BASH completion problem

i have "bash-completion" package installed but when i do this:
$ xine
and press TAB, it does not show me list of files. sometimes it shows the files but most of the times it does not. same with all others commands:
$ rm -v
here too it does not show any files, as i said sometimes it does but most of the times it does not. if i do
$ cd
and press TAB then it always shows the directories,. never fails with directories but not the same with files.
what could be the problem ? i have no problems like this with ZSH.

prim wrote:You have to run bash as a login shell.
See http://bbs.archlinux.org/viewtopic.php?id=30205
well i used "chsh" to change my login shell to BASH and when i tried to this script:
if [[ -o login ]]; then
echo "Welcomoe to BASH as login shell"
else
echo "NOPE..... NOPE.... NOPE..NOPE"
fi
i always get "NOPE...NOPE...."
i use "rxvt-unicode" and my "~/.Xdefaults" file says this:
! rxvt-unicode settings
urxvt*loginShell: true
urxvt*saveLines: 10000
i still do not undertsand my the tab-completion system doe snot work and why BASH is still not the login shell

Snote Help

Hi guys ...we are getting following error , Formula is not available in the table RSAFORMMAP when we are tying to open the transformation or Transfer Rules.
When I check the SNOTE Tcode its saying that Note 1061119 inconsistent and when I check it its saying that 1061119 Obselete Version is implemented,
Our BASIS guy saying that , it may effect other programms. So what should I do, Snote clearly mentioned in the service market place that Obselete Version means we have re implement this note...
Can anybody tell me what is obsolete version of Note implementation and how can I fix it ? Iam sure that If we implement this note again we can get rid of the RSAFORMMAP problem, But I am unable to force our BASIS guy ,bcas am not 100% sure that it wont affect other programms
Thanks

Hi
Thanks for the reply...Here the problem is with the sandbox...Dev and Prod has in good shape...Sandbox is giving us errors...So when I go to Snote in Dev and Prod its not showing any inconsistent or obsolete versions....but when I go to the Snote in Sandbox its showing Inconsistent...0001061119
So when I browse in each environment and check the status of this note , Its showing InProcess and Obsolete version implemented in Sandbox, Where as its showing Finished and Completely implemented in Dev and Prod...
Do you think there will be any other problems we wll get after if we implement completely in Sandbox as well...
Help appreciated...
Regards

SNOTE problem

Similar Messages

Maybe you are looking for