Software can't find WVC-54G

I successfully programmed my WVC-54G to operate wirelessly on a WEP encripted Linksys router.  I can get to it wirelessly using Internet Explorer.  But, I cannot get the Linksys Viewer software to "find" it.  I tried downloading the new version of the s/w (slicker looking...) but it has the same problem.  I have tried to find it using the IP address on both tabs (Internet and LAN), but it won't find it.  Perhaps I have the wrong port number (I am using the default 1024).
Since I can see it through IE, but not the s/w, I suspect it is a problem in communications.  I have the Linksys router firewall turned off.  Any suggestions?
Thanks.

HELP! I had the SAME problem! I can see the camera w/IE, but the software doesn't find it.. The other day, it did find it.. then I got it all set up.. unplugged the ethernet - recycled the power, and it was working wirelessly.. but then I went to set up a recording and the utility couldn't see the camera. I uninstalled/ reinstalled the software - nothing.. Then, in reading above, I saw that I also had a dhcp lease for the camera, even though it's set up as status 1.115. So I deleted the lease, but I still can't get the software to find the camera EVEN PLUGGED IN with a network cable.. This is crazy! Please help! The same software on my laptop sees the camera just fine and the recording etc works.. but I don't leave that computer on - I want the desktop to be able to do it.
Thank's in advance for any help you can give me.
- Maggie

Similar Messages

  • Have been using successfully Acrobat 8 Standard, version 8.3.1 for years.  Suddenly can not digitally sign anything because software can not find "existing digital ID file?

    Have been using successfully Acrobat 8 Standard, version 8.3.1 for years.  Suddenly can not digitally sign anything because software can not find "existing digital ID file?

    Are you still using Acrobat 8? If not read further.
    All Acrobat versions prior to 11.0.07 had a security flaw that they allows signing with certificates that had "Extended Key Usage" (EKU) restricted to certain certificate uses and those did not include document signing. Most frequently those were certificates with "Client Auth" or "Server Auth" in EKU. Acrobat/Reader 11.0.07 fixed this problem, which also means that while previous versions accepted such certificates for signing 11.0.07 and later do not.

  • HP Software Can't Find My Photosmart D110a on Network

    I used to be able to use my Photosmart D110a for about a year with no problems.
    One day, all of a sudden, I go to print something, and the printer isn't listed.
    I uninstalled all the software. I verified in the Control Panel and my Programs Folder that all software and drivers were uninstalled.
    Then, I load the CD and the software won't find my printer on the network. On the next page, it had me type in the IP address (192.168.0.10) and still couldn't find it. If I type that IP address on a browser page, it finds it just fine.
    I can also add it manually on my devices and printers, but I really want to be able to use it from the HP Solution Center like I used to because the advanced scanning utilities are great.
    I've tried restarting the computer and my device, along with my router, several times with long pauses while off to make sure connections reset ok.
    I even tried running the standalone driver and all-in-one software from the website, along with the update and every diagnostic tool there was available to download. I have even disabled the firewall and the software still can't find the printer on the network.
    Please help, I keep coming to dead ends with this

    I would uninstall one more time and do an L3 on the computer to remove all HP files that are on the Photosmart D110.  This way when you run the install for the drivers you have gotten from the site, one will know that all the files from the old drivers have been removed. To do an L3:
    Step one: Clear temp directory
    Type %temp% in the run or search for programs and files field
    Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
    Continue with Step 2 below
    Step two: Downloaded and extracted to your system:
    1. Download the full feature software and drivers
    Link the drivers page for the printer in question
    2. Once the download is finished double click on the file to extract the software.
    3. When the installation window opens press the cancel button to stop the installation
    4. Type %temp% in the run or search for programs and files field
    5. Look for, and open the folder starting with 7z (Example: 7zS2356)
    6. Right click on the folder, and select Copy
    7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
    8. Open the 7z folder you just copied to your desktop
    9. Open folder Util
    10. Open folder CCC
    11. Run the uninstall_L3
    12. When the uninstall has completed restart the computer
    13. Run Disk cleanup from Accessories\ System Tools folder under all programs
    14. Download and install the latest version of Adobe flash player
    Update Adobe Flash Player
     15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Setup & Utility Software Can't Find Express

    A year ago, I set up an Airport Express using a PowerBook G4 with Tiger and a Linksys router. Now I have a MacBook with Leopard and the same Linksys router. After it was initially setup, the green light (on the Express) has been on.
    So yesterday, I went to reconfigure the Express using both AirPort Setup Assistant and AirPort Utility. My problem is that neither piece of software can find the Express. They say that nothing is there but I can see the green light on the Express lit.
    The only other change I made between the initial setup and now is I added WPA2 security to the router.
    Why can't the setup software see the Airport Express?
    Thanks,
    LeonD

    Hi Leon,
    I think I can help you because I just had to reset my Express so it would work with my new wireless router. The process to do this is pretty easy and painless. I think you'll need to do this since you changed your network settings.
    First, you need to reset your Express. The reset button is on the outboard side of the jack where you plug in the cable going to your stereo/external speakers. You'll need a straightened out paper clip to press the reset button, but the real trick is that you'll need to press the button while the Express is plugged in. I suggest that if you want an easy time of things, you take the Express and plug it into an extension chord that can give you some flexibility so you can at least see what you are doing. I have a three pronged adaptor/extension chord for Apple power supplies, and so I used that.
    Once you can press the reset button with the straightened out paper clip, you need to hold button in for about five seconds. At that point, the amber light on the Express should flash rapidly. You can now release the reset button and the Express can be accessed and set up using these instructions.
    Turn on your computer’s Airport card.
    Switch the Airport card’s network to Airport Extreme (The network will be named "Apple xxxxxxxxx")
    Run Airport Admin Utility.
    Make sure Airport Express is chosen.
    Click on Configure.
    Airport tab should open by default, if not, click on Airport tab.
    Under Airport Network, click Wireless Mode scroll box and choose “Join Existing Wireless Network (Wireless Client).”
    Click Wireless work Scroll box and choose your Network.
    Fill in security and password options as they apply.
    Click on Music tab.
    Make sure Enable Airtunes On This Base Station is checked
    Fill in iTunes Speaker Name.
    Set iTunes Speaker Password (if desired).
    Click on Update.
    Wait for Airport Express to restart, click OK
    Airport Express status light should be a solid green.
    Hope this gets you going. Out of curiosity, have you tried shutting off the WPA2 security on your router and tried to access the Express then? If this works, try turning on the WPA2 security in the Express before turning it back on in the router.
    Cheers,
    Malcolm

  • Can connect to internet, but software can't find base station

    I bought the Airport express a few months ago to use with my stereo and IBM laptop. It took me a few tries to get it initially installed properly, but eventually did and everything worked great. A month or so ago I noticed that the tab to select "remote speakers" was not on my iTunes as it had been before. All of the settings were correct on my iTunes however so then I went to the AirPort Utility to check out the settings and the program said it could not find the base station. I tried to find the station on AirPort Set-up assistant. This program can find it but not connect to it (on the first page after the menu it shows the base station and when I hit "next" it can't connect to the station). All of this is really odd as I have internet access through this base throughout these problems. Any ideas what might be happening and how to fix it? I have reset the base station to factory settings numerous times, I have unplugged everything and restarted the whole process numerous times, I even left the base station unplugged for a week to let it relax. Still nothing works. I can connect to the internet through the station but can not find the station.
    IBM T40 Windows XP Pro

    Thanks for your help. I can manually connect to the internet but I can't figure out how to get iTunes to recognize that there are remote speakers as my computer can't recognize my base station. Is there a manual way to do this?
    IBM T40 Windows XP Pro

  • Desktop Software can't find 9790

    Hi, i've been trying for a month now to get my 9790 to work on Blackberry Desktop software so i've actually got it backed up to the PC etc. But when ever i conect via USB it says "please conect device" i've gone through all the trouble shooting options & none seam to work/apply. Getting really angry. I hope someone can help, thanks in advance.

    Hi and Welcome to the Community!
    I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
    Further, it has also been reported that when your user profile on windows (type 'echo %userprofile%' in the command prompt) contains spaces, then the installer will not work. In order to solve this issue, log out of your Windows account and log back in using the local Administrator account (or any other account name without spaces) and install the desktop (for all users).
    1) Remove any/all BB device OS update package(s) from your PC (add/remove programs)
    2) Cleanly uninstall the RIM Desktop Software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    Some have reported the manual search and removal of RIM, BB, and Puma registry keys to be helpful...do not attempt this if you are at all unsure as editing your registry wrongly can render your entire PC useless.
    Others have reported the use of a registry cleansing tool to also be helpful
    Still others have reported the use of your original PIM (e.g., Outlook, NOTES, etc.) installation CD, running the "repair" process, to be helpful in some situations
    3) Get a fresh download of the RIM Desktop Software:
    http://us.blackberry.com/apps-software/desktop/
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    5) Install the Desktop Software to your PC
    6) Install (also to your PC), the device OS package
    7) Start the organizer configuration over:
    KB03315 How to synchronize organizer data (calendar, task list, memo list, and contact list) using the BlackBerry Desktop Software
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Mac Proxy Server Software - can not find any app to run a Mac proxy server

    Hi! Looking for an application that will run and manage a proxy server on my Mac. I am after something that does not involve programming, editing and using the console, something that is done through a simple, user friendly interface. I would need to run a proxy server for web access so that the client using the proxy could be seen as using the authenticated IP of the server machine. (To put it simple, I need to be able to log on to a site where authentication is done via IP as well as login / pass. My home machine is set up for access but I would like to be able to log in on the move with my laptop or from other machines. Unfortunately I can not get a static IP for my laptop and would like to run a proxy server on my home machine so I can log in remotely via the proxy server) I am after a software solution that will install and manage the proxy and gives me full control over setting access limitaions etc (i.e something safe, easy and reliable). I have ben searching for days but have not found anything for the Mac although there appears to be an abundance of such software for Windows . . . Any help would be immensly appreciated! I have a spare older Mac I could set up for this purpose and keep online all the time . . .

    Would this do what you need?
    http://www.apple.com/downloads/macosx/networking_security/macproxy.html
    (I'm not that knowledgeable about servers, so this is a shot in the dark)

  • Desktop Software can't find my old BlackBerry Curve 8330

    I've never synced my 8330 with desktop software.  I just bought a new 9330 and want to sync my calendar, notes, etc. onto it.  I've loaded the desktop software, but it cannot detect my 8330 to sync.  HELP!

    I've never synced my 8330 with desktop software.  I just bought a new 9330 and want to sync my calendar, notes, etc. onto it.  I've loaded the desktop software, but it cannot detect my 8330 to sync.  HELP!

  • HP 6310 All-in-one - Apple find it but HP Software can't

    I moved my HP 6310xi to an Airport Extreme. Everything set up very smoothly (which I was pleasantly surprised by). I can print to it from any application -- in other words, my Mac found it with no problem and used the Driver that was already installed on my machine.
    However, it's an all-in-one, so it needs to find my mac (for scanning, and memory card). I re-installed the latest HP software for this printer, and the HP software can't find the printer. So I am kind of stuck.
    Any ideas? I don't know if it matters, but my Mac says I am connected through Bonjour.
    Jon

    Most HP software uses the USB port to discover printer. Unless it say's it's network ready, it will then have a network config utility.
    Anyway, moving AIO printer onto AEBS, you will loss the scanning and fax features, since AEBS does not support it. Some AIO's support webscan, if your does, you can open the browser and type in the address of your AIO printer into the URL and you will see your printer there.

  • HP Officejet 150 mobile, HP scan does not work (Can not find scanner)

    Hi,
    I just bought a HP Officejet 150 Mobile All-in-One. I installed the complete software package (downloaded from HP Site) with bluetooth on a windows 7 Acer Aspire S5 laptop. Printing seems to work fine, but when starting HP Scan, i get the following error message:
    Saing that the software can not find the scanner with suggestions to solve it.
    Is it possible to scan with a buetooth connection? Any other suggestions what is going wrong?
    Best regards,
    Roelof Crevecoeur
    This question was solved.
    View Solution.

    Hello Roelof Crevecoeur,
    Scanning is not supported through a Bluetooth connection, only printing is available for such connectivity, You will need a USB in order to scan:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03137985&tmp_task=setupCategory&cc=us&dlc=en&lc...
    NOTEcan functions are not available through a Bluetooth connection. Scan functions are supported only through a USB connection.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • My iWeb can't find directory/path at GoDaddy

    I can't make a test connection via the FTP on iWeb's publish page. Keeps saying "the directory/path couldn't be found. Verify your settings and try again."
    I've searched the forum here and called GoDaddy for help. The tech there told me that I'm making a connection but my software can't find the "root folder" at my domain.
    Help?????

    I'm gonna answer my own question/problem in case anyone else encounters the same.
    Instead of publishing to FTP service, I published to a folder on my computer. Then I was able to manually upload the files, like I'd been doing in the past, using the GoDaddy FTP service. Mission accomplished.

  • Network magic can't find my router

    I'm using WAG320N  with network pro 5.5 was working alright
    yesterday it asked me to upgrade / buy new version  or install old version 5.5 again.
    I followed step to install again , then software can't find my router even internet / network worked alright but only Network Magic doesn't work since re-install
    what's wrong with it?
    do I have to re-install everytime NM has upgrade? it's annoying

    I'm using WAG320N  with network pro 5.5 was working alright
    yesterday it asked me to upgrade / buy new version  or install old version 5.5 again.
    I followed step to install again , then software can't find my router even internet / network worked alright but only Network Magic doesn't work since re-install
    what's wrong with it?
    do I have to re-install everytime NM has upgrade? it's annoying

  • Microsoft Office can't find your license for this application - multiple copies of Office 2013 x32 failing to start, Software Protection Service timing out

    We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues.  We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
    throw the following error:
    'Microsoft Office can't find your license for this application.  Microsoft Office will now exit.'
    We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
    It appears to be an issue with the Software Protection service not starting properly.  In Event Viewer, we see the following:
    'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
    Event 7000'
    This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates.  It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
    different workstations.  Office repairs have also been unsuccessful.  
    Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing?  Maybe an Office update in the last 2-3 months?
    Thanks for any info.

    We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues.  We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
    throw the following error:
    'Microsoft Office can't find your license for this application.  Microsoft Office will now exit.'
    We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
    It appears to be an issue with the Software Protection service not starting properly.  In Event Viewer, we see the following:
    'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
    Event 7000'
    This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates.  It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
    different workstations.  Office repairs have also been unsuccessful.  
    Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing?  Maybe an Office update in the last 2-3 months?
    Thanks for any info.

  • Re-install software for the C6280 all in one printer... get an error message "can't find file"

    need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find  user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
    the folder 7z256315 does not exist on the HD.
    I also get a message that it can't find PS_A10_02_software.msi.
    Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
    hope you can help
    thanks
    charlie
    This question was solved.
    View Solution.

    Hi cberistain, 
    Follow the steps below, and let me know what happens?
    Step one: Clear temp directory
    Type %temp% in the run or search for programs and files field
    Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
    Continue with Step 2 below
    Step two: Downloaded and extracted to your system:
    1. Download the full feature software and drivers
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
    2. Once the download is finished double click on the file to extract the software.
    3. When the installation window opens press the cancel button to stop the installation
    4. Type %temp% in the run or search for programs and files field
    5. Look for, and open the folder starting with 7z (Example: 7zS2356)
    6. Right click on the folder, and select Copy
    7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
    8. Open the 7z folder you just copied to your desktop
    9. Open folder Util
    10. Open folder CCC
    11. Run the uninstall_L4
    12. When the uninstall has completed restart the computer
    13. Run Disk cleanup from Accessories\ System Tools folder under all programs
    14. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
     15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
    Let me know if you are able to successfully install the software and driver, and are able to print & scan?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Can't find my data file to back up, so I can uninstall and reinstall the software. (Windows, Vista & Palm version 6.0.1)

    I can't find my data file, in order to back it up.  After going to Documents - Palm One, the only thing that looks like a user name is a file with no data.  Somewhere there has to be another file with all my data, since data is available when I open the Palm One software on my computer.  After backing it up, I want to uninstall and reinstall the Palm One software.  I'm hoping this resolves my inabilty hot sync.  Thanks!  Lauraflavin.
    Post relates to: Tungsten T5

    If you're using XP, your data is here:
    C:\Program Files\Palm (or PalmOne)\ your Hotsync Name abbreviated \
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Maybe you are looking for