Solaris 10 patch level

Is a Server installed with Solaris 10 Sparc edition release 11/06, with latest Recommended Patch bundle, equivalent to a server installed with Solaris 05/08 plus the same latest Recommended Patch bundle?
Thanks in advance
Enrico

No .... the differences relate to hardware that the different releases recognize / can use ..i.e you need certain release versions of Solaris to run on certain hardware - like the T2000 needs a minimum release to be used, can also relate to HBA's as well.
On an existing system running Solaris 10 you would not notice any difference however.
Edited by: PhilRutter on May 25, 2008 11:39 PM

Similar Messages

  • Solaris kernel patch levels

    I have engineers asking for a particular kernel patch level to be installed on machines.
    Is there anywhere that lists the kernel patch level on releases and hardware updates for Solaris 8-10?
    Thanks,
    Duane

    Please start with Sunsolve (http://sunsolve.sun.com) and Sun documentation (http://docs.sun.com) web sites.

  • BI Content patch level on BI system and source system

    Hi all, hope you can help
    our BI and ECC6 systems are separated. My question is, do we need to be on the same BI_CONT patch level in BI and ECC6? Our current patch level in BI is 7.0.3 level 9 and in ECC6 we have not loaded any patches, however we have BI content which was delivered with the install.
    Regards
    Charl

    Plan on applying the Linux and Solaris versions of all applications patches to the respective servers.
    How To Apply a Patch in a Multi-Server Environment
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136342.1
    Patches must always be applied in their entirety. If you apply a patch to update
    your filesystem, you must also apply the corresponding database and generation
    portions of the patch if they are included. When updating the filesystem in a
    multi-server environment, you should apply the patch on all servers.
    You can see what patches have been applied to which nodes in OAM on the Applied Patches page. Oracle will not advise you to have patch differences, otherwise supportability comes into question due to partial patch application.

  • Diff Patch Level on External web and Source Server

    Hi ,
    Version - 11.5.10.2
    We recently setup our external web server in DMZ on Linux while our source system
    is running on Solaris.
    We followed 238276.1 doc to migration the middle tier to linux. We were asked to check
    both systems should have same Patch level.
    I have doubts here
    o Since we have only one DB Tier, and we copied APPL_TOP from Source solaris and
    convert the files to linux. we installed IAS and 8.0.6 home from Universal installer
    Is it possible to have diff patch level on both instances. as we have only DbTier
    and the only way [ I know ] to check whether we have patch applied or not is
    query to database or using OAM as it would show the same patch.
    o if there is possibility to have diff. patch level then how can we detect this and what is the way to apply patches on one server [ Adadmin ? ]
    o Can you please point me to any DOC which can give clarity how diff. type of patches
    we can have in Apps.
    Regards,
    Jagjeet Singh

    Plan on applying the Linux and Solaris versions of all applications patches to the respective servers.
    How To Apply a Patch in a Multi-Server Environment
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136342.1
    Patches must always be applied in their entirety. If you apply a patch to update
    your filesystem, you must also apply the corresponding database and generation
    portions of the patch if they are included. When updating the filesystem in a
    multi-server environment, you should apply the patch on all servers.
    You can see what patches have been applied to which nodes in OAM on the Applied Patches page. Oracle will not advise you to have patch differences, otherwise supportability comes into question due to partial patch application.

  • Patch Level Report Extraction

    Hi there,
    From an internal auditors' stand point, is there a way to check patch level of a SUN Solaris 10 servers? The goal of this check is to ensure that the servers are up-to-date with all latest patches.
    Thanks,
    V

    Hi,
    you can use the patchdiag tool (available by sun.com - download).
    This tool require the patchdiag.xref file available on http://sunsolve.sun.com/pdownload.do?target=patchdiag.xref
    for more info see http://sunsolve.sun.com/search/document.do?assetkey=1-9-240587-1

  • Solaris Patching/SAN Boot

    I have just created an ABE on a SAN device, upgraded it and then booted from it.
    Its been a long journey, and involved a SR with oracle.
    I was new to it and am astonished at how hard it has been. Not hard in the sense that anything was over complicated, but the tangle mess of patch levels and gathering information on server firmware, SAN boot, HBA firmware, patches etc has been a nightmare. Not sure whether its me just new to patching solaris 10 etc, but I have literally trawled through a couple of dozen documents, countless web browsing and a few grey hairs  just to achieve this.
    I will hold my hand up, some of it was of our own making - I was patching a system that had not been touched in a number of years.
    Anyone had a similar experience or does it get easier?!?!?

    I really don't like san boot for operating system. You have too many points of failure for the basic operation.
    Anyway, during installation, ensure that you access the disk using just one path (using zoning for example). After you enable and configure MPxIO, you could enable other paths.

  • Patch level & SPS...

    hi all,
    Our server Support pack Patch level says..109886.44.
    How do we calculate the SPS level with this..? Is there any hierarchy of patch level how we can calculate the stack level with this information ?
    I am confused to calculate the patch level with this info..please help.
    Thanks!,
    Addy

    Yoganand,
    I don't have access to the backend to check with SPAM / System - Status or other ways..
    As a portal consultant, how can i check thru the Portal or Java tools ?
    ( Is it only java home/system info ? )
    When i was checking a trace file in OS level ( Solaris ) i see Kernel version 7 and Patch level 109886.44 In J2ee engine homepage it shows version 7 SP14 only.
    My question is about the Patch level ??
    Please clarify my doubt.
    Thanks for your time..
    Addy

  • Error while updating patch level 11 of HR

    Dear All,
    I am getting following error while updating HR patch level 11.
    Phase OBJECTS_LOCKED_?: Objects Locked in Requests
    Request      Names of Locked Transport Objects
    MRDK900089   LIMU REPS H99_POST_PAYMENT
                 LIMU REPS RPCIPE00
    MRDK900542   R3TR FORM HR_IN_TAXF16000Y
    the above request is in other client, and it is a local request, which is not getting transported; i mean it does not allow to transport. give the following error.
    Object messages: R3TR CINS 01200615322 0000824666
    Transport objects from package PCPO to target MRP only
    Object messages: R3TR NOTE 0000970953
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG DATA_TOP_FILL_TEXT
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG PUT_PERNR_INFO
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU REPS H99_POST_PAYMENT
    Transport objects from package PCPO to target MRP only
    Please help me how to rectify.
    Thanks n regards
    Bhaskar

    Hello Bhaskar,
    is the transport already approved?
    If not approve it and try it again. (also it is a local one)
    If not check the objects and unlock them manually the following way:
    SE03 => Unlock Objects (Expert Tool)
    But if you approve your transport... the objects should be unlocked.
    Regards
    Stefan

  • Error: Current patch level of database is unknown. Use latest dbpatch build

    hi,
    I am applying EP6SP2 CM&COLL patch 5 DBPATCH.
    current portal version: version=6.0.2.29.0
    current C&COLL version: CM_COLL version=60 SP2 Patch 5
    Before applying this patch, i applied CM&COLL patch 4 hotfix 8 and the DBPATCH included in tht. Now, after applying CM&COLL patch 5, i tried to apply DBPATCH which comes with CMOLL patch5 SAR file. My database is oracle database. While applying this patch i encountred following error:
    <i>
    Current database version: SP2.CM.SPs
    ERROR: Error: Current patch level of database is unknown. Use the latest dbpatch build
    java.lang.Exception: Error: Current patch level of database is unknown. Use the latest dbp
    atch build.
            at com.sapportals.wcm.tool.dbpatch.Database.getPatchList(Database.java:48)
            at com.sapportals.wcm.tool.dbpatch.DBPatch.patch(DBPatch.java:66)
            at com.sapportals.wcm.tool.dbpatch.DBPatch.main(DBPatch.java:26)
    </i>
    Now according to SAP Note 761224, they asked us to use updated DBPATCH attached to this note. But currently there are only 3 files attached of MSSQL. I want the updated ORACLE_DBPATCH files.
    rgds,
    Nilz

    Hi,
    i m thru. i raised the question in OSS. They rectified the mistake and attached dbpatch_oracle.zip to SAP note 761224.
    rgds,
    Nilz

  • DB space history not updating in DB02 after upgrading to NW7 patch level 11

    We upgraded our NW04 system to NW7 patch level 11 and now when I go into DB02 and click on DB space history there is no new data since the upgrade.  SAP_Collector_For_PerfMonitor runs every hour without error.  I've checked st22 and there are no shortdumps and I can't find any timeout issues.  Ideas?

    You may need to a newer release of saposcol.  Saposcol comes with your kernel, if you haven't updated your kernel recently that could be a conflict with your saposcol.
    Lee

  • How to find out the IPS and DS Service Pack and patch levels in windows server.

    Hi,
    I have installed the Information Platform Services 4.0 and Data services 4.0 in windows QA system, now we need to install the same version of IPS & DS  in windows PRD system for this how could we find out the exact version of IPS & DS  ( Service pack and patch levels ) and where we can find the same.
    Many Thanks,
    Sudheer

    Hi Sudheer,
    On a Windows Operating Systems you can check the “Programs and Features” in control panel.You can see a list of both the Name and Version number of SAP BusinessObjects that is installed.
    option 2:
    Open CMC go to Settings. In the properties, you will find the Product Version.
    Please check below SAP notes for more information.
    http://service.sap.com/sap/support/notes/1602088
    Regards,
    Pavan

  • List of issues with patch level

    Is there a list of application errors reported for each patch level?
    When working with SAP R/3, there is a SAP note released for each patch level which states the changes delivered in that patch as well as what fixes are delivered. Therefore, it is easy to see what application errors exist in each patch level. Is there something similar for SAP Business One?

    There are also notes for those Lists of issues with each patch level for B1.  What is your B1 version and PL?
    Thanks,
    Gordon

  • What is the latest patch level for SAP CRM 7.0

    Hello Experts,
    I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is.  We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
    Thanks,
    VSK

    > I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is.  We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
    http://service.sap.com/patches
    --> SAP Application Components
    --> SAP CRM
    --> SAP CRM 7.0
    --> Entry by Component
    --> CRM Application Server ABAP
    --> SAP CRM ABAP 7.0
    --> Support Packages
    Scroll down and see the latest patches. If you click on the text you'll see the problems fixed.
    Support packages are by definition a collection of patches and fixes for problems, however, there may be small improvements in certain areas.
    Markus

  • How do I check if I need SAP GUI 7.10 Patch-Level 7?

    Hi,
    I have installed SAP GUI 7.10 client.
    After restarting the PC, I tried to install the Patch-Level 7 but I got the message:
    This SAP Front End Patch cannot be applied. Either this patch is already installed or the components to be patched are not yet installed at all.
    My version for the SAPGUI installer is 2008.0.0.187
    From Windows, I looked at the version for the installed file saplogon.exe, it is 7100.1.0.1027.
    Does anyone know if my SAPGUI would require Patch-Level 7?
    Thanks.
    HY

    Thanks for replying.
    This is my SAP logon info, do it looks alright?
    Release: 710 Final Release
    File Name: saplogon.exe
    File Version 7100.1.0.1027
    Build: 0
    Patch Level: 0
    These are my installed component. Could it be that none of the below components need to be patched?
    1. SAP GUI Suite
    2. R/3 Add-on
    3. General Add-on
    4. Legacy Components
    5. CRM Add-on
    Edited by: Han Yang Lee on Jul 9, 2008 4:39 PM

  • Abap and java patch level

    Hi,
    I have a portal installed on a standalone java based on sp13.  I also have a backend ECC5.0 on a web as abap (sp9).  If I want to connect the portal to the backend ecc, do I need to upgrade the abap to the same patch level as the standalone java (ie. sp13).
    Also, I have installed the portal via rapid installer, which has also created a new sld for me.  If I want to add the abap as a new technical system in the sld, is it required that both the java (of which the sld is based) and the abap be of the same patch level?  thanks!

    Hi,
    If you want to connect to the backend system , both the Portal and ECC (Back end System ) need not be of the same pacth level. And you can also add the techincal system in SLD of diffrent pacth levels.
    Thanks,
    Tanuj

  • Compatibility between MII with different patch levels.

    Hi all,
    I know that the best solution is to have the same MII patch level in MII development environment and in produztion enviroment.
    For many reasons that aren't  under my direct controli, we'll have an MII 12.0.5 in development and MII 12.0.8 in production.
    Are there any point to verify? Can we export from development environment and deploy to production without any changes?
    On the contrary, what about having the development environment at a higher patch level than production enviroment (e.g 12.0.8 in development and deploy the solution on a 12.0.5 prduction enviroment)?
    Thank in advance for your responses/experiences on this subject.
    Best wishes for a nice 2010

    Hi,
    If you transfer from lower patches to higher patches there will not be any problem as such.
    In the otherhand if you trying to export the project from higher to lower patch  there you have the problem. Becuase some bugs might have been fixed in the higher patch those are not avaialble in the lower. For example in some date function of BLS might have been fixed in updated patch,the same you copied then that particulr function will not work in the lower patch and the BLS will come with errors.
    Hope this helps you.
    -Suresh
    Edited by: Suresh Hiremath on Jan 7, 2010 12:11 PM

Maybe you are looking for