Solaris command to show all network interfaces in a server (plumb/unplumb)?

Hi there,
Is there a Solaris command to show all the network interfaces in a server
(plumb/unplumb etc...).
I have a V880 that has an eri0 on board, plumbed up. It also has a couple
of ge0, ge1, and ce0, and a qfe card.
ifconfig -a only shows eri0.
(I am using something like "dladm show-link", but this is really for
the link-aggregation).
How do I show the remaining network interfaces?
Thanks
Tony

You can see all installed interfaces by running 'grep network /etc/path_to_inst'. An example:
grep network path_to_inst
"/node@1/pci@8,600000/network@1" 0 "ge"
"/node@1/pci@9,700000/network@1,1" 0 "eri"
"/node@1/pci@9,700000/pci@2/network@0" 0 "ce"
"/node@1/pci@9,700000/pci@2/network@1" 1 "ce"
"/node@1/pci@9,700000/pci@2/network@2" 2 "ce"
"/node@1/pci@9,700000/pci@2/network@3" 3 "ce"
"/node@1/pci@9,600000/network@2" 4 "ce"
shows, ge0, eri0, ce0 - ce4

Similar Messages

Finder: Command K does not show all CIFS/SMB volumes on server

Greetings:
I use the Command-K to connect to a NetApp storage server in our office; if I issue this:
smb://server
or
cifs://server
I only get some of the shares and not all of them. If do the same on a Windows machine by using the command "net view \\server" it shows all the available shares.
Question: is there any limitation? Any tips, perhaps on the NetApp side?
Best regards
Claudio

We are experinceing the same issue. It appears to have limitations on the length of the share/volume name.
smbclient from the command line shows all of them but Apple+K doesn't

How to choose the good Network Interface on a server ?

Hi all,
On server you have generally more than one ip address so ...How to choose the good Network Interface on a server for the NoSQL Node ?
Thank you for all
C.Pruvost.

Hi Charles I only consider storage nodes and their replicated nodes.
Actually I show an error in the logs saying that one of my storage node use a loopback address. On my laptop I have a network interface and a loopback address (disabled)...when starting sn1 I show that the port 5000 is only linked to the ip address 0.0.0.0 so it is not the good ip address..although i use for configuring :
java -jar ..\lib\kvstore-2.0.23.jar makebootconfig -root root1 -port 5000 -admin 5001 -host ipaddress_of_my_laptop -harange 5010,5020
and after
java -jar ..\lib\kvstore-2.0.23.jar start -root root1
If you have a sample tutorial that explains how simulate on the same laptop an Oracle NoSQL architecture running on 3 disctinct servers please give us this information.
Thank you for all.
Christophe.
PS : error message
Failures: Task 1 ERROR at 2013-01-15 07:23:19 UTC: DeploySN sn3(pruv
ost-pc:5200): 1/DeploySN failed.: Register: Cannot mix loopback and non-loopback
addresses in the same store. The store value is not configured to use loopback
addresses but storage node pruvost-pc:5200 is a loopback address. (11.2.2.0.23)
: Register: Cannot mix loopback and non-loopback addresses in the same store. T
he store value is not configured to use loopback addresses but storage node pruv
ost-pc:5200 is a loopback address. (11.2.2.0.23) java.lang.IllegalStateException
: Register: Cannot mix loopback and non-loopback addresses in the same store. T
he store value is not configured to use loopback addresses but storage node pruv
ost-pc:5200 is a loopback address.
at oracle.kv.impl.sna.StorageNodeAgent.register(StorageNodeAgent.java:15
48)
at oracle.kv.impl.sna.StorageNodeAgentImpl$2.execute(StorageNodeAgentImp
l.java:194)
at oracle.kv.impl.sna.StorageNodeAgentImpl$2.execute(StorageNodeAgentImp
l.java:188)
at oracle.kv.impl.fault.ProcessFaultHandler.execute(ProcessFaultHandler.
java:90)
at oracle.kv.impl.sna.StorageNodeAgentImpl.register(StorageNodeAgentImpl
.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
Edited by: chpruvos on Jan 14, 2013 11:24 PM
And my ipconfig
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 172.20.10.2
Subnet Mask . . . . . . . . . . . : 255.255.255.240
Default Gateway . . . . . . . . . : 172.20.10.1
Ethernet adapter Local Area Connection* 24:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
and
C:\Users\cpruvost>ping pruvost-pc
Pinging PRUVOST-PC.fr.oracle.com [172.20.10.2] with 32 bytes of data:
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Ping statistics for 172.20.10.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Edited by: chpruvos on Jan 14, 2013 11:25 PM

Net view doesn't show all network computers in Windows 2012 R2

We have Symantec Endpoint v12 running on Windows 2012 R2. It used to be working fine and we could see all network computers in Endpoint Protection Manager. Since last Friday, the Endpoint Protection Manger can see only two computers. If I run new view
command on the server, it also shows only these two computers. If I open Windows Explorer and then Network, I can see all network computers. The network discovery and share has been enabled. Other servers and computers don't have this problem. What could be
the issue?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

rebooting the server fixes the problem.
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com
yeah most of the time "rebooting" works..
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Install solaris via jumpstart with 2 network interfaces

Hi guys,
I'm trying to deploy Solaris 10 on a LDOM , using Jumpstart server. The LDOM must have 2 network interfaces and 2 default routes. Here's the relevant part of sysidcfg file:
network_interface=vnet0 {primary
                hostname=aaaaaaaaa
                ip_address=aaa.aaa.aaa.aaa
                netmask=255.255.240.0
                protocol_ipv6=no
                default_route=bbb.bbb.bbb.bbb
network_interface=vnet1 {
                hostname=bbbbbbbbbbb
                ip_address=ccc.ccc.ccc.ccc
                netmask=255.255.248.0
                protocol_ipv6=no
                default_route=ddd.ddd.ddd.ddd
}After {ok} boot net - install, I get these messages:
Using RPC Bootparams for network configuration information.
Attempting to configure interface vnet1...
Skipped interface vnet1
Attempting to configure interface vnet0...
Configured interface vnet0
USB keyboard
Reading ZFS config: done.
Setting up Java. Please wait...
Serial console, reverting to text install
Beginning system identification...
Searching for configuration file(s)...
Using sysid configuration file xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx:/sysidcfg
Search complete.
Discovering additional network configuration...
Completing system identification...and then unattended install stops and goes into interactive menu:
Default Route     Error for vnet1     ────────────────────────────────────────────────
The route ddd.ddd.ddd.ddd could not be added at this time. If you     wish to     accept
the route provided, the route     will be     added to the /etc/defaultrouter     file
to be     used at     reboot.     If you choose not to accept your choice, you will be
asked     to enter network information again for this interface.
      Accept Route
      ────────────
      [X] Yes
      [     ] NoAfter I choose "yes" , the installation goes back to unattended (automated) state.
Any ideas why installation breaks when adding second default route?
If I delete the line default_route=ddd.ddd.ddd.ddd, the installation is not interrupted.
Many thanks,
kido
Edited by: kido on Dec 29, 2010 6:10 PM

Hello again,
First of all, if I delete the second default route from sysidcfg, the installation performs uninterrupted, but vnet1 is not brought up after reboot. I get a message like: vnet1 is not a valid interface name...or something similar...
Regarding multiple default routes now... As long as "man defaultrouter" and "man sysidcfg" state that multiple routes are supported, I would expect this to work...or at least I need a way of installing 2 NICs without human intervention...
I will try to use some post install script instead ( will create /etc/hostname.vnet1 and add second route to /etc/defaultrouter) and will let you know the results.

AIOS command to show neighboring networks

Is there are command to show you all the neighboring networks in the area that the AP can see? Like the list you would get on a laptop when you fire up inSSIDer. I am trying to get bridges up in the field and I am blind as to what these APs can see.
CCNP - Wireless
CWNA

There isn't a way to see rogue AP's from autonomous AP's or bridges. If you had a CleanAir AP then you would be able to see the other AP's (rogue) out there.
Sent from Cisco Technical Support iPhone App

Dreamweaver CS5 not showing all recordsets in databases/bindings/server behaviors windows

Dreamweaver CS5 is not showing all recordsets created on a page in the databases/bindings/server behaviors windows.
I'm on XP, DW version 11.5 build 5344.
Any idea of how I fix that?
Thanks,
Betty

Dreamweaver CS5 is not showing all recordsets created on a page in the databases/bindings/server behaviors windows.
I'm on XP, DW version 11.5 build 5344.
Any idea of how I fix that?
Thanks,
Betty

OSX 10.9 not showing all network drive contents

Hi,
I one of the users in our department has updated to osx 10.9
when the user connects to the network drive it connects but when the user navigates to the folder they need it appears to be empty.
We have tested on or Macs and the contents show up fine.
Any help would be greatly appreciated.
I have tried both smb:// and cifs:// but to no avail.
Thanks

Hi,
There are few hiccups after 10.9 release. Have you checked and installed the following pathch ?
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Get-Help command not showing all the details

When I open the Exchange Management Shell on my laptop and do any command like the following:
help get-mailbox -detailed
I just get the following result:
SYNTAX
DESCRIPTION
PARAMETERS
    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, see
        about_CommonParameters (link of some kind).
REMARKS
    To see the examples, type: "get-help -examples".
    For more information, type: "get-help -detailed".
    For technical information, type: "get-help -full".
If I do the same commands from any of my Exchange servers, I get the full details. I've done this command for years and this is the first time I'm seeing no details. Any help would be appreciated.
Thanks,
Andrew

I understand that, but the question was whether I knew what an elevated prompt was. When I run the 'update-help' command from the powershell session using an elevated prompt, I get the following output.
update-help : Failed to update Help for the module(s) 'Microsoft.PowerShell.Diagnostics, Microsoft.WSMan.Management'
with UI culture(s) {en-US} : Unable to retrieve the HelpInfo XML file for UI culture en-US. Make sure the HelpInfoUri
property in the module manifest is valid or check your network connection and then try the command again.
This output is the same in either a PowerShell session or an Exchange Management Shell session both running with elevated permissions.
If I type the command 'help get-user -detailed' in the PowerShell session, I get what I expect, but in the Exchange Management Shell session I get nothing but the kind of thing that was in my original post.
Very odd.
Andrew

NetBIOS broadcast traffic not directed to all network interfaces

Hi folks,
Using a packet sniffer (WireShark), I've found that my Mac broadcasts NetBIOS Name Service (NBNS) traffic over my en1 (WiFi) interface but not over the ppp0 interface used for my Mac's PPTP VPN client connection. As I'm experimenting with enabling Windows computer names over a PPTP VPN from my Mac I was wondering... how can I configure my Mac to direct NBNS traffic over the ppp0 interface?
Thanks,
Shaun

IGMP snooping may be enabled by default on the 6509. Disabling it may solve your problem.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/snooigmp.htm#wp1020466

How to determine network interface that will be used to send a packet

Hello,
I'm writing to you because I encountered the following problem. My program displayes all network interfaces that are available in the system, but I would like to add a functionality in which a user can enter a destination address IP (ex. the IP address of the Google search engine) and will get information which network interface will be used to send it. As I know it is associated with reading information from routing table in the system. Maybe you know the API (functions/methods) which I could use to do it in Solaris ? I program in C/C++, but if you know how to do it in other programming languages (Java, Perl, Python) I will be grateful for any information.
Thank you for any help, tips and suggestions.
Best regards,
Foxrafi

Thank you for your response it was very helpful :).
I went to the OpenSolaris webpage because I would like to find the code of this command, but unfortunately I don't know where I should start my searches.
There is a page with source code of basic commands, but there is no "route" command: here .
Maybe you are better enlightened where I should start.
Thank you for answer.
Foxrafi

Beginner setting up solaris 10 container and having network card problems

Hi I am just learning about solaris containers and am having an issue of getting my new zone to be seen on the network.
I have installed the global zone server name GPSAPP02 network address of 192.168.200.45 works fine.
I created :-
a pool called "ellipse-pool" using pooladm/poolcfg
a zone called "ellipse-zone" using zoneadm/zonecfg
I used the followijng commands...
zoneadm list -cv
zonecfg -z ellipse-zone
create               --
set zonepath=/zfspool/zones/ellipse-zone
set autoboot=true
     add net
set address=192.168.200.46/24
set physical=eri0
set defrouter=192.168.200.254
end
set pool=ellipse-pool
verify
commit
exit
The output from the "zonecfg -z ellipse-zone info" command is below:-
zonename: ellipse-zone
zonepath: /zfspool/zones/ellipse-zone
brand: native
autoboot: true
bootargs:
pool: ellipse-pool
limitpriv:
scheduling-class:
ip-type: shared
inherit-pkg-dir:
dir: /lib
inherit-pkg-dir:
dir: /platform
inherit-pkg-dir:
dir: /sbin
inherit-pkg-dir:
dir: /usr
net:
address: 192.168.200.46/24
physical: eri0
defrouter not specified
I then installed the zone and rebooted using zoneadm.
I can login to the zone and setup the timezone and terminal etc.
I gave this a hostname of GPSEL01 as this is what I want it to be known as on the network.
So far so good but from the network I cannot ping the IP address I assigned to the zone 192.168.200.46
What have I missed or what should I check to troubleshoot this?
I ran a ifconfig -a and received the following information...
ifconfig -a
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
# ifconfig lo0:1 192.168.200.46 netmask 255.255.255.0 up
ifconfig: SIOCSLIFNETMASK: lo0:1: permission denied

Hi
I notice in your output from ifconfig -a in the global zone that the NIC card is nge1.
However in your zoneconfig you have set the NIC card to eri0 (physical = eri0). I cannot see this NIC card in your ifconfig -a.
When a zones is of IP-type shared-ip it needs to use a network interface that is already plumbed into the global zone. In your case you need to change the NIC in your zone config to nge1 :
zonecfg -z ellipse-zone
select net address=192.168.200.46
set physical=nge1
end
exit
Then reboot your zone.
A couple of other minor comments.
1) As it appears the zone is on the same subnet as the global zone, if the global zone already has the default route of 192.168.200.254 setup you don't need to specify it in the zone config. You are most likely to use the defrouter parameter if the zone was on a different subnet to the global zone (but shared the same physical NIC).
2) You have specified the netmask in the address field which is fine. But again this should not be necessary as long as your /etc/netmasks file is correct in the global zone.
Hope this helps

How many Standard Ethernet Network Interface by server ?

Hi
Huh... I'd like to install a RAC configuration with 2 server but i've a doubt.
When i list all network interfaces i've:
Server1
en0 Standard Ethernet Network Interface
et0 IEEE 802.3 Ethernet Network Interface
lo0 Loopback Network Interface
Server2
en0 Standard Ethernet Network Interface
et0 IEEE 802.3 Ethernet Network Interface
lo0 Loopback Network Interface
Is it good or not ? (probably not and documentation says that en0 and en1 must be present in the configuration). OK.
I'm under AIX 5.3 and by Smit i've an option intituled "Add a Virtual IP Address Interface". Is it possible to create the second Interface as a Virtual IP adress here ?
Thanks in advance
Regards
Den

Den,
Basically, you would be needing two separate interface cards for each participating node. The first one to connect to the public network and second for the use an interconnect. Not sure, if et0 is really an network interface, if yes, you should be ok.
VIP is nothing but an un-assigned IP address (in the same subnet as your public IP address) which is expected to be inactive before you install the CRS. This should be listed in your /etc/hosts file and/or dns server (if used). Not sure if adding VIP through the SMIT makes it active, if yes, then you might not want to use SMIT to set up the VIP.
This may help you with more information - http://download.oracle.com/docs/cd/B19306_01/install.102/b14201/preaix.htm#sthref378
HTH
Thanks
Chandra

Query Network interface with C#

Hello,
I'm developing a C# winforms application under Windows server 2008 (64bit)
Is there a way to query all network interfaces installed in the PC and check their IP address and if there is an ethernet connection (connected \ not connected) ?
I want to do it with Microsoft C# classes.
Best regards,
Z.V

Hi,
Solution 1:>
Step1:>
UdpClient u = new UdpClient(remoteAddress, 1);
IPAddress localAddr = ((IPEndPoint)u.Client.LocalEndPoint).Address;
Step2:>
foreach (NetworkInterface nic in NetworkInterface.GetAllNetworkInterfaces())
IPInterfaceProperties ipProps = nic.GetIPProperties();
// check if localAddr is in ipProps.UnicastAddresses
Solution 2:>
foreach(NetworkInterface ni in NetworkInterface.GetAllNetworkInterfaces())
if(ni.NetworkInterfaceType == NetworkInterfaceType.Wireless80211 || ni.NetworkInterfaceType == NetworkInterfaceType.Ethernet)
Console.WriteLine(ni.Name);
foreach (UnicastIPAddressInformation ip in ni.GetIPProperties().UnicastAddresses)
if (ip.Address.AddressFamily == System.Net.Sockets.AddressFamily.InterNetwork)
Console.WriteLine(ip.Address.ToString());
Documentation:>
NetworkInterface.GetAllNetworkInterfaces Method
Good Tutorial:>
http://www.codeproject.com/Articles/64975/Detect-Internet-Network-Availability
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

External ip adress at the server network interface behind the router

Hello to all!
I am installing MacOSX Snow Leopard Server and using it behind my AirPort router as a mail and web server. I was setup Airport at the NAT section with 'Enable default host at' option and all services workning well, but one thing that i want to understand is the 'network interfaces' at the 'Server admin' of Leopard Server. There is listed only internal ip adress (10.0.1.2) that use the my server, but there is no my static external ip adress. Is it correct ? Or i should manualy also to add a external ip adress which is now actually used with my AirPort router?
If i should, so how do it correctly, using virtual interfaces at the network section or somewhere else?

So, with any Airport routers i can't to route my public static IP adress to the MacOSX Server machine? I need another router device for this, am i right?
Your Airport uses your public static IP address.
Your Airport is typically then configured to port-forward inbound traffic along to your server at your own private static IP address via NAT. The mechanism known as port-forwarding is (once it is configured) how traffic routing to your public static IP address gets routed to your private static IP address.
In general (and unless something like NAT is involved), there's only one host box active at one IP address at a time.
I am not sure, but i think that at the server network interface i should has a public static IP adress, but with this configuration i can't see it.
If you would so kind as to tell me what particular part(s) of [this article|http://labs.hoffmanlabs.com/node/275] are confusing and why, and I'll see if I can address the confusion and to update the article.

Solaris command to show all network interfaces in a server (plumb/unplumb)?

Similar Messages

Maybe you are looking for