[SOLVED] ATI Catalyst Driver Issues

I'm sure issues with these drivers get posted often, but I'm honestly not entirely sure how to search for this. I installed the base system with no issues, but when it came to adding a DE, I had some issues. I tried several times to install the catalyst drivers for my radeon hd 6800. I installed from the official repository using:
#pacman -S catalyst-dkms catalyst-utils
I had no luck starting X server after that so I tried installing from Vi0l0's unnoficial repository. This caused X Server to seg fault every time I attempted to start it.
I'm a little confused on how I am even using gnome at this point considering I have not successfully installed a graphics driver.
I blacklisted radeon and uninstalled catalyst and somehow was able to start X Server. I'm obviously using a lame driver considering every time I move a console window around it moves at around 2 FPS.
How can I successfully install the proprietary fglrx/catalyst drivers?
Last edited by instantaphex (2012-12-10 04:49:49)

Thanks for the replies. It's been a busy week and I have to move my desktop into the kitchen to get internet access because I'm also having ndiswrapper issues. Here is my Xorg.0.log
[ 6.208]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 6.208] X Protocol Version 11, Revision 0
[ 6.208] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 6.209] Current Operating System: Linux archbox 3.6.9-1-ARCH #1 SMP PREEMPT Tue Dec 4 08:04:10 CET 2012 x86_64
[ 6.209] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8c2fca85-5d82-4e80-9492-3ffe9e0760e5 ro quiet
[ 6.209] Build Date: 08 November 2012 07:09:29PM
[ 6.209]
[ 6.209] Current version of pixman: 0.28.0
[ 6.209] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.209] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.209] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 9 06:53:08 2012
[ 6.231] (==) Using config file: "/etc/X11/xorg.conf"
[ 6.231] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6.233] (==) ServerLayout "aticonfig Layout"
[ 6.233] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 6.233] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 6.233] (**) | |-->Device "aticonfig-Device[0]-0"
[ 6.233] (==) Automatically adding devices
[ 6.233] (==) Automatically enabling devices
[ 6.233] (==) Automatically adding GPU devices
[ 6.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 6.246] Entry deleted from font path.
[ 6.266] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 6.266] Entry deleted from font path.
[ 6.266] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 6.267] Entry deleted from font path.
[ 6.267] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6.267] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 6.267] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.267] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6.267] (II) Loader magic: 0x7fcc40
[ 6.267] (II) Module ABI versions:
[ 6.267] X.Org ANSI C Emulation: 0.4
[ 6.267] X.Org Video Driver: 13.1
[ 6.267] X.Org XInput driver : 18.0
[ 6.267] X.Org Server Extension : 7.0
[ 6.270] (--) PCI:*(0:1:0:0) 1002:6739:174b:174b rev 0, Mem @ 0xd0000000/268435456, 0xfd5c0000/131072, I/O @ 0x0000ce00/256, BIOS @ 0x????????/131072
[ 6.270] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6.270] Initializing built-in extension Generic Event Extension
[ 6.270] Initializing built-in extension SHAPE
[ 6.270] Initializing built-in extension MIT-SHM
[ 6.270] Initializing built-in extension XInputExtension
[ 6.270] Initializing built-in extension XTEST
[ 6.270] Initializing built-in extension BIG-REQUESTS
[ 6.271] Initializing built-in extension SYNC
[ 6.271] Initializing built-in extension XKEYBOARD
[ 6.271] Initializing built-in extension XC-MISC
[ 6.271] Initializing built-in extension SECURITY
[ 6.271] Initializing built-in extension XINERAMA
[ 6.271] Initializing built-in extension XFIXES
[ 6.271] Initializing built-in extension RENDER
[ 6.271] Initializing built-in extension RANDR
[ 6.271] Initializing built-in extension COMPOSITE
[ 6.271] Initializing built-in extension DAMAGE
[ 6.271] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.271] Initializing built-in extension DOUBLE-BUFFER
[ 6.271] Initializing built-in extension RECORD
[ 6.271] Initializing built-in extension DPMS
[ 6.271] Initializing built-in extension X-Resource
[ 6.271] Initializing built-in extension XVideo
[ 6.271] Initializing built-in extension XVideo-MotionCompensation
[ 6.271] Initializing built-in extension XFree86-VidModeExtension
[ 6.271] Initializing built-in extension XFree86-DGA
[ 6.271] Initializing built-in extension XFree86-DRI
[ 6.271] Initializing built-in extension DRI2
[ 6.271] (II) "glx" will be loaded by default.
[ 6.271] (II) LoadModule: "glx"
[ 6.307] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.325] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 6.325] compiled for 6.9.0, module version = 1.0.0
[ 6.326] Loading extension GLX
[ 6.326] (II) LoadModule: "fglrx"
[ 6.326] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 6.497] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 6.498] compiled for 1.4.99.906, module version = 9.0.2
[ 6.498] Module class: X.Org Video Driver
[ 6.499] (II) Loading sub module "fglrxdrm"
[ 6.499] (II) LoadModule: "fglrxdrm"
[ 6.499] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 6.513] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 6.513] compiled for 1.4.99.906, module version = 9.0.2
[ 6.513] (II) AMD Proprietary Linux Driver Version Identifier:9.00.2
[ 6.513] (II) AMD Proprietary Linux Driver Release Identifier: 9.00.11
[ 6.513] (II) AMD Proprietary Linux Driver Build Date: Sep 20 2012 11:56:16
[ 6.513] (++) using VT number 1
[ 6.513] (WW) Falling back to old probe method for fglrx
[ 6.541] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 6.555] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.555] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.569] (--) Chipset Supported AMD Graphics Processor (0x6739) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:4:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:9:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:10:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 6.577] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 6.577] (II) AMD Video driver is signed
[ 6.577] (II) fglrx(0): pEnt->device->identifier=0x1cfb770
[ 6.578] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 6.578] (II) Loading sub module "vgahw"
[ 6.578] (II) LoadModule: "vgahw"
[ 6.578] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 6.591] (II) Module vgahw: vendor="X.Org Foundation"
[ 6.591] compiled for 1.13.0, module version = 0.1.0
[ 6.591] ABI class: X.Org Video Driver, version 13.1
[ 6.591] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 6.591] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 6.591] (==) fglrx(0): Default visual is TrueColor
[ 6.591] (**) fglrx(0): Option "DPMS" "true"
[ 6.592] (==) fglrx(0): RGB weight 888
[ 6.592] (II) fglrx(0): Using 8 bits per RGB
[ 6.592] (==) fglrx(0): Buffer Tiling is ON
[ 6.592] (II) Loading sub module "fglrxdrm"
[ 6.592] (II) LoadModule: "fglrxdrm"
[ 6.592] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 6.592] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 6.592] compiled for 1.4.99.906, module version = 9.0.2
[ 6.596] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.596] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.596] (**) fglrx(0): NoAccel = NO
[ 6.596] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 6.596] (--) fglrx(0): Chipset: "AMD Radeon HD 6800 Series " (Chipset = 0x6739)
[ 6.596] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x174b)
[ 6.596] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 6.596] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 6.596] (--) fglrx(0): MMIO registers at 0xfd5c0000
[ 6.596] (--) fglrx(0): I/O port at 0x0000ce00
[ 6.596] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 6.619] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 6.621] (II) Loading sub module "vbe"
[ 6.621] (II) LoadModule: "vbe"
[ 6.621] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 6.622] (II) Module vbe: vendor="X.Org Foundation"
[ 6.622] compiled for 1.13.0, module version = 1.1.0
[ 6.622] ABI class: X.Org Video Driver, version 13.1
[ 6.622] (II) fglrx(0): VESA BIOS detected
[ 6.622] (II) fglrx(0): VESA VBE Version 3.0
[ 6.622] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 6.622] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 6.622] (II) fglrx(0): VESA VBE OEM Software Rev: 13.12
[ 6.622] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
[ 6.622] (II) fglrx(0): VESA VBE OEM Product: BARTS
[ 6.622] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 6.662] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 6.662] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 6.662] (II) fglrx(0): PCIE card detected
[ 6.662] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 6.662] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 6.662] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 6.662] (EE) fglrx(0): Fail to init MGPU configuration:0x0!
[ 6.662] (II) fglrx(0): RandR 1.2 support is enabled!
[ 6.662] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 6.662] (==) fglrx(0): Center Mode is disabled
[ 6.662] (II) Loading sub module "fb"
[ 6.662] (II) LoadModule: "fb"
[ 6.662] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.663] (II) Module fb: vendor="X.Org Foundation"
[ 6.663] compiled for 1.13.0, module version = 1.0.0
[ 6.663] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.663] (II) Loading sub module "ddc"
[ 6.663] (II) LoadModule: "ddc"
[ 6.663] (II) Module "ddc" already built-in
[ 6.783] (EE) fglrx(0): ASYNCIO service has not started yet while register message handler for DAL
[ 6.785] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 6.785] (II) fglrx(0): Output DFP2 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP3 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP4 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP5 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP6 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP7 has no monitor section
[ 6.785] (II) fglrx(0): Output CRT1 has no monitor section
[ 6.785] (II) Loading sub module "ddc"
[ 6.785] (II) LoadModule: "ddc"
[ 6.785] (II) Module "ddc" already built-in
[ 6.785] (II) fglrx(0): Connected Display0: CRT1
[ 6.785] (II) fglrx(0): Display0: Failed to get EDID information.
[ 6.785] (II) fglrx(0): EDID for output DFP1
[ 6.785] (II) fglrx(0): EDID for output DFP2
[ 6.785] (II) fglrx(0): EDID for output DFP3
[ 6.785] (II) fglrx(0): EDID for output DFP4
[ 6.785] (II) fglrx(0): EDID for output DFP5
[ 6.785] (II) fglrx(0): EDID for output DFP6
[ 6.785] (II) fglrx(0): EDID for output DFP7
[ 6.785] (II) fglrx(0): EDID for output CRT1
[ 6.785] (II) fglrx(0): Manufacturer: ACR Model: 53 Serial#: 2456821854
[ 6.785] (II) fglrx(0): Year: 2009 Week: 27
[ 6.785] (II) fglrx(0): EDID Version: 1.3
[ 6.785] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 6.785] (II) fglrx(0): Sync: Separate
[ 6.786] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 6.786] (II) fglrx(0): Gamma: 2.20
[ 6.786] (II) fglrx(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
[ 6.786] (II) fglrx(0): First detailed timing is preferred mode
[ 6.786] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.292 greenY: 0.603
[ 6.786] (II) fglrx(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 6.786] (II) fglrx(0): Supported established timings:
[ 6.786] (II) fglrx(0): 720x400@70Hz
[ 6.786] (II) fglrx(0): 640x480@60Hz
[ 6.786] (II) fglrx(0): 640x480@67Hz
[ 6.786] (II) fglrx(0): 640x480@72Hz
[ 6.786] (II) fglrx(0): 640x480@75Hz
[ 6.786] (II) fglrx(0): 800x600@56Hz
[ 6.786] (II) fglrx(0): 800x600@60Hz
[ 6.786] (II) fglrx(0): 800x600@72Hz
[ 6.786] (II) fglrx(0): 800x600@75Hz
[ 6.786] (II) fglrx(0): 832x624@75Hz
[ 6.786] (II) fglrx(0): 1024x768@60Hz
[ 6.786] (II) fglrx(0): 1024x768@70Hz
[ 6.786] (II) fglrx(0): 1024x768@75Hz
[ 6.786] (II) fglrx(0): 1280x1024@75Hz
[ 6.786] (II) fglrx(0): 1152x864@75Hz
[ 6.786] (II) fglrx(0): Manufacturer's mask: 0
[ 6.786] (II) fglrx(0): Supported standard timings:
[ 6.786] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 6.786] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 6.786] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 6.786] (II) fglrx(0): Supported detailed timing:
[ 6.786] (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 6.786] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 6.786] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 6.786] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 145 MHz
[ 6.786] (II) fglrx(0): Monitor name: Acer V173
[ 6.786] (II) fglrx(0): Serial No: LE10D0928502
[ 6.786] (II) fglrx(0): EDID (in hex):
[ 6.786] (II) fglrx(0): 00ffffffffffff00047253005e207092
[ 6.786] (II) fglrx(0): 1b13010368221b78ca3dc5a6564a9a25
[ 6.786] (II) fglrx(0): 125054bfef80714f8140818001010101
[ 6.786] (II) fglrx(0): 010101010101302a009851002a403070
[ 6.786] (II) fglrx(0): 1300520e1100001e000000fd00384c1f
[ 6.786] (II) fglrx(0): 500e000a202020202020000000fc0041
[ 6.786] (II) fglrx(0): 63657220563137330a0a0a0a000000ff
[ 6.786] (II) fglrx(0): 004c45313044303932383530320a001d
[ 6.786] (II) fglrx(0): Printing probed modes for output CRT1
[ 6.786] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 6.786] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1152x864"x60.0 108.00 1152 1328 1440 1688 864 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.786] (II) fglrx(0): Output DFP1 disconnected
[ 6.786] (II) fglrx(0): Output DFP2 disconnected
[ 6.786] (II) fglrx(0): Output DFP3 disconnected
[ 6.786] (II) fglrx(0): Output DFP4 disconnected
[ 6.786] (II) fglrx(0): Output DFP5 disconnected
[ 6.786] (II) fglrx(0): Output DFP6 disconnected
[ 6.786] (II) fglrx(0): Output DFP7 disconnected
[ 6.786] (II) fglrx(0): Output CRT1 connected
[ 6.786] (II) fglrx(0): Using exact sizes for initial modes
[ 6.786] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 6.786] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.786] (II) fglrx(0): DPI set to (96, 96)
[ 6.786] (II) fglrx(0): Eyefinity capable adapter detected.
[ 6.786] (II) fglrx(0): Adapter AMD Radeon HD 6800 Series has 6 configurable heads and 1 displays connected.
[ 6.786] (==) fglrx(0): PseudoColor visuals disabled
[ 6.786] (II) Loading sub module "ramdac"
[ 6.786] (II) LoadModule: "ramdac"
[ 6.786] (II) Module "ramdac" already built-in
[ 6.786] (==) fglrx(0): NoDRI = NO
[ 6.786] (==) fglrx(0): Capabilities: 0x00000000
[ 6.786] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 6.786] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 6.786] (==) fglrx(0): UseFastTLS=0
[ 6.786] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 6.786] (--) Depth 24 pixmap format is 32 bpp
[ 6.786] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible.
[ 6.786] (WW) fglrx(0): ***********************************************************
[ 6.786] (WW) fglrx(0): * DRI initialization failed *
[ 6.786] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 6.787] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 6.787] (WW) fglrx(0): ***********************************************************
[ 6.787] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
[ 6.796] (II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
[ 6.796] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1280) (front color buffer - assumption)
[ 6.796] (II) fglrx(0): Largest offscreen area available: 1280 x 6911
[ 6.797] (==) fglrx(0): Backing store disabled
[ 6.797] Loading extension FGLRXEXTENSION
[ 6.797] (**) fglrx(0): DPMS enabled
[ 6.798] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 6.798] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 6.798] (II) LoadModule: "glesx"
[ 6.798] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 6.863] (II) Module glesx: vendor="X.Org Foundation"
[ 6.863] compiled for 1.4.99.906, module version = 1.0.0
[ 6.863] Loading extension GLESX
[ 6.863] (II) fglrx(0): GLESX enableFlags = 576
[ 6.867] (II) LoadModule: "amdxmm"
[ 6.868] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 6.878] (II) Module amdxmm: vendor="X.Org Foundation"
[ 6.878] compiled for 1.4.99.906, module version = 2.0.0
[ 6.878] (EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0):
[ 6.878] (EE) fglrx(0): XMM failed to initialize
[ 6.878] (WW) fglrx(0): No XV video playback available
[ 6.878] (II) fglrx(0): Enable composite support successfully
[ 6.878] (WW) fglrx(0): Option "VendorName" is not used
[ 6.878] (WW) fglrx(0): Option "ModelName" is not used
[ 6.878] (==) fglrx(0): Silken mouse enabled
[ 6.878] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 6.879] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.939] (--) RandR disabled
[ 6.968] (II) AIGLX: Screen 0 is not DRI capable
[ 6.968] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[ 6.968] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 7.220] (II) config/udev: Adding input device Power Button (/dev/input/event13)
[ 7.220] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.220] (II) LoadModule: "evdev"
[ 7.221] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.232] (II) Module evdev: vendor="X.Org Foundation"
[ 7.232] compiled for 1.13.0, module version = 2.7.3
[ 7.232] Module class: X.Org XInput Driver
[ 7.232] ABI class: X.Org XInput driver, version 18.0
[ 7.232] (II) Using input driver 'evdev' for 'Power Button'
[ 7.232] (**) Power Button: always reports core events
[ 7.232] (**) evdev: Power Button: Device: "/dev/input/event13"
[ 7.232] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.232] (--) evdev: Power Button: Found keys
[ 7.232] (II) evdev: Power Button: Configuring as keyboard
[ 7.232] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event13"
[ 7.232] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 7.232] (**) Option "xkb_rules" "evdev"
[ 7.232] (**) Option "xkb_model" "evdev"
[ 7.232] (**) Option "xkb_layout" "us"
[ 7.268] (II) config/udev: Adding input device Power Button (/dev/input/event12)
[ 7.268] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.268] (II) Using input driver 'evdev' for 'Power Button'
[ 7.268] (**) Power Button: always reports core events
[ 7.268] (**) evdev: Power Button: Device: "/dev/input/event12"
[ 7.268] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.268] (--) evdev: Power Button: Found keys
[ 7.268] (II) evdev: Power Button: Configuring as keyboard
[ 7.268] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input12/event12"
[ 7.268] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 7.268] (**) Option "xkb_rules" "evdev"
[ 7.268] (**) Option "xkb_model" "evdev"
[ 7.268] (**) Option "xkb_layout" "us"
[ 7.268] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 7.268] (II) No input driver specified, ignoring this device.
[ 7.268] (II) This device may have been added with another device file.
[ 7.269] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event0)
[ 7.269] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[ 7.269] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[ 7.269] (**) Logitech Optical USB Mouse: always reports core events
[ 7.269] (**) evdev: Logitech Optical USB Mouse: Device: "/dev/input/event0"
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product 0xc016
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found 3 mouse buttons
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found scroll wheel(s)
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found relative axes
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found x and y relative axes
[ 7.269] (II) evdev: Logitech Optical USB Mouse: Configuring as mouse
[ 7.269] (II) evdev: Logitech Optical USB Mouse: Adding scrollwheel support
[ 7.269] (**) evdev: Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[ 7.269] (**) evdev: Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/input/input0/event0"
[ 7.269] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 8)
[ 7.269] (II) evdev: Logitech Optical USB Mouse: initialized for relative axes.
[ 7.269] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[ 7.269] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[ 7.269] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[ 7.269] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[ 7.269] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[ 7.269] (II) No input driver specified, ignoring this device.
[ 7.269] (II) This device may have been added with another device file.
[ 7.269] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 7.269] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.269] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 7.269] (**) Logitech USB Keyboard: always reports core events
[ 7.269] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[ 7.269] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 7.269] (--) evdev: Logitech USB Keyboard: Found keys
[ 7.269] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 7.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.0/input/input1/event1"
[ 7.269] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 7.269] (**) Option "xkb_rules" "evdev"
[ 7.269] (**) Option "xkb_model" "evdev"
[ 7.269] (**) Option "xkb_layout" "us"
[ 7.270] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2)
[ 7.270] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.270] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 7.270] (**) Logitech USB Keyboard: always reports core events
[ 7.270] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event2"
[ 7.270] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 7.270] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 7.270] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 7.270] (--) evdev: Logitech USB Keyboard: Found keys
[ 7.270] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 7.270] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 7.270] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 7.270] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.1/input/input2/event2"
[ 7.270] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 7.270] (**) Option "xkb_rules" "evdev"
[ 7.270] (**) Option "xkb_model" "evdev"
[ 7.270] (**) Option "xkb_layout" "us"
[ 7.271] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 7.271] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 7.271] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 7.271] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 7.271] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 7.272] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10)
[ 7.272] (II) No input driver specified, ignoring this device.
[ 7.272] (II) This device may have been added with another device file.
[ 7.273] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event11)
[ 7.273] (II) No input driver specified, ignoring this device.
[ 7.273] (II) This device may have been added with another device file.
[ 7.273] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[ 7.273] (II) No input driver specified, ignoring this device.
[ 7.273] (II) This device may have been added with another device file.
[ 7.274] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
[ 7.274] (II) No input driver specified, ignoring this device.
[ 7.274] (II) This device may have been added with another device file.
[ 7.274] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
[ 7.274] (II) No input driver specified, ignoring this device.
[ 7.274] (II) This device may have been added with another device file.
[ 7.275] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event7)
[ 7.275] (II) No input driver specified, ignoring this device.
[ 7.275] (II) This device may have been added with another device file.
[ 7.275] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event8)
[ 7.275] (II) No input driver specified, ignoring this device.
[ 7.275] (II) This device may have been added with another device file.
[ 7.276] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event9)
[ 7.276] (II) No input driver specified, ignoring this device.
[ 7.276] (II) This device may have been added with another device file.
[ 7.276] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 7.276] (II) No input driver specified, ignoring this device.
[ 7.276] (II) This device may have been added with another device file.
[ 7.279] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 7.287] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 7.287] (II) fglrx(0): Using EDID range info for horizontal sync
[ 7.287] (II) fglrx(0): Using EDID range info for vertical refresh
[ 7.287] (II) fglrx(0): Printing DDC gathered Modelines:
[ 7.287] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 7.287] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.287] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.287] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.288] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 7.288] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 7.288] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 10.785] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 10.785] (II) fglrx(0): Using hsync ranges from config file
[ 10.785] (II) fglrx(0): Using vrefresh ranges from config file
[ 10.785] (II) fglrx(0): Printing DDC gathered Modelines:
[ 10.785] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 10.785] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.786] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.786] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 10.786] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 10.786] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 23.739] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 23.739] (II) fglrx(0): Using hsync ranges from config file
[ 23.739] (II) fglrx(0): Using vrefresh ranges from config file
[ 23.739] (II) fglrx(0): Printing DDC gathered Modelines:
[ 23.739] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.739] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24.928] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 24.928] (II) fglrx(0): Using hsync ranges from config file
[ 24.928] (II) fglrx(0): Using vrefresh ranges from config file
[ 24.928] (II) fglrx(0): Printing DDC gathered Modelines:
[ 24.928] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 24.928] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.928] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.928] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 24.928] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 24.928] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.929] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 24.929] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 24.929] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 27.583] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 27.583] (II) fglrx(0): Using hsync ranges from config file
[ 27.583] (II) fglrx(0): Using vrefresh ranges from config file
[ 27.583] (II) fglrx(0): Printing DDC gathered Modelines:
[ 27.583] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 27.583] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
I'll try out the suggestions you guys have given and update.

Similar Messages

[SOLVED] ATI Catalyst / Xorg issue with Multihead (3monitor)

i'm having problems for a long time, with different versions of the ATI Catalyst driver and Xorg,
right now i'm using this versions,
catalyst-hook 11.2-2
catalyst-utils 11.2-1
lib32-catalyst-utils 11.2-1
xorg-server 1.9.4.901-1
xorg-server-common 1.9.4.901-1
xorg-server-utils 7.6-2
the catalyst package are from the catalyst server recommended by the Arch Wiki
http://catalyst.apocalypsus.net/repo/catalyst/x86_64
the problem that i have is that when i try to pass from one monitor to another, when
i pass to the 3rd one the X crashes, this happen always with the same monitor no matter what.
here is the backtrace from the startx logs,
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x49f788]
1: /usr/bin/X (0x400000+0x60349) [0x460349]
2: /lib/libpthread.so.0 (0x7f28028b7000+0xf150) [0x7f28028c6150]
3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f27fecf4000+0x86ffff) [0x7f27ff563fff]
4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f27fecf4000+0x86fb5d) [0x7f27ff563b5d]
5: /usr/bin/X (0x400000+0x13bce2) [0x53bce2]
6: /usr/bin/X (0x400000+0x13be31) [0x53be31]
7: /usr/bin/X (0x400000+0x13a880) [0x53a880]
8: /usr/bin/X (miPointerUpdateSprite+0x18c) [0x45871c]
9: /usr/bin/X (0x400000+0x5892d) [0x45892d]
10: /usr/bin/X (0x400000+0x164266) [0x564266]
11: /usr/bin/X (mieqProcessDeviceEvent+0x172) [0x49ef52]
12: /usr/bin/X (mieqProcessInputEvents+0xcc) [0x49f08c]
13: /usr/bin/X (ProcessInputEvents+0x9) [0x469969]
14: /usr/bin/X (0x400000+0x2cf73) [0x42cf73]
15: /usr/bin/X (0x400000+0x2131e) [0x42131e]
16: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f2801837dcd]
17: /usr/bin/X (0x400000+0x20ec9) [0x420ec9]
Segmentation fault at address (nil)
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
i wanted to know if there is any official forum / bug tracker of amd/ati where report this bug,
or if one of you had this kind of problem before and can give me a hand to resolve this, i would be grateful.
here is the ati report about the system info,
http://pastebin.com/jU73mU4W
http://ideone.com/mcISC
thanks in advance.
regards.
Last edited by hord (2011-07-10 20:26:12)

solved!
since the cursor used through the proprietary catalyst driver have issues, use instead the SW cursor,
Section "Device"
Option "SWCursor" "true"
EndSection
[0] http://ati.cchtml.com/show_bug.cgi?id=86
[1] http://ati.cchtml.com/show_bug.cgi?id=117
[2] http://phoronix.com/forums/showthread.p … post209030
Last edited by hord (2011-07-10 20:25:23)

Can I download the ATI Catalyst driver or something for my new iMac?

I've got Windows Vista 32 bit and I would like to have the Catalyst control center stuff so I can control the graphics.
Where can I get this stuff? Can I just download the latest Radeon 4800 series catalyst/driver/software from ATI?
thanks

I need to rephrase my question:
This is the software I need: ATI Catalyst Control Center http://ati.amd.com/products/catalystcontrolcenter/index.html
It's not the display driver I need, but the control center for an ATI product. I need more specific control, which the Catalyst Control Center would give me.
Apple's cd only has the display driver and not this control center.
I downloaded the full suite here: http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista32/common-vista32
When this installs no control center shows up. Any idea, anyone?

ATI Catalyst driver- Not building-

Sorry I have been trying to install the Catalyst driver for 4hr's now and getting noware.
If I try it with yaourt the Catalyst package installs the "libgl" so the Catalyst-ustils will no work. So, If i try it from the Tar files the "utils" first it asks for xorg-server. If I install xorg-server it instals "libgl". If I try to install the "catalyst Tar it telles me I need to install "catalyst-utils" first.
What path do I take to find the easter egg?
I have a new elitebook 8530w with Mobility FireGL 5700
Last edited by hunterthomson (2009-05-15 04:11:38)

kensai wrote:
hunterthomson wrote:I think it is ****ing bull that Arch dosen't suport the catalyst.
I think that can be called the fact that catalyst doesn't support Linux at all, it just supports three or four outdated distributions, Red Hat, Suse, Ubuntu. And I think that is about it. Why bother with something that will hold back progress, 9.5 came out, no support for kernel 2.6.29 yet and we are about to get 2.6.30 soon.
Ya, I realy think AMD treats OpenSource like wincrap dose. Like some second horse to dup work they don't feel like doing and to deliberitly make crappy so they can be like "see windoz is better if you want GOOD software you have to pay but we will give you this crap to show how nice we are"
But on the other hand "my hand" why take it out on the people that just didn't know or just needed to save money. If I had the choice to get the an Intel card I would have. I just don't think arch dev's should take it out on the users.
But with that said the AUR package works just fine.
However, now that I have it not crashing I have more problems. I think it would be an easy fix for someone who knows a little bit about this stuff. here is a link to the thread I started for it>>>
http://bbs.archlinux.org/viewtopic.php?id=72299
Last edited by hunterthomson (2009-05-17 07:51:15)

Ati Display Driver Issue

Every time I run Live Update 5, it states that the ATI display driver is NOT installed. Additionally, the video card doesnt show up in control center, cpu-z nor AMD Overdrive.
I have already removed all of the display drivers and reinstalled with no luck. Everything seems to be running fine, but its annoying me and I want it fixed. Stats Below:
CPU Arch : 1 CPU - 4 Cores - 4 Threads
CPU PSN : AMD Athlon II X4 645 Processor
CPU EXT : MMX(+), 3DNow!(+), SSE (1, 2, 3, 4A), x86-64, AMD-V
CPUID : F.5.3 / Extended : 10.5
CPU Cache : L1 : 4 x 64 / 4 x 64 KB - L2 : 4 x 512 KB
Core : Propus (45 nm) / Stepping : BL-C3
Freq : 3549.52 MHz (229 * 15.5)
MB Brand : MSI
MB Model : 870S-G46 (MS-7599)
NB : AMD 870 rev 00
SB : AMD SB850 rev 40
GPU Type : AMD Radeon HD 6670
DirectX Version : 11.0
RAM : 8192 MB DDR3 Dual Channel
RAM Speed : 610.7 MHz (3:8) @ 8-8-8-20
Slot 1 : 4096MB (10700)
Slot 1 Manufacturer : Corsair
Slot 2 : 4096MB (10700)
Slot 2 Manufacturer : Corsair
I have a feeling that it is something simple I am overlooking, but any help woudl be appreciated.

Thought this might help too:
GPU-Z Validation hraac
Card Name:
AMD Radeon HD 6670
Owrer:
Anonymous
Submitted:
2012-03-14 13:20:42
Owner's Comments:
GPU:
Turks
Revision:
Technology:
40 nm
Die Size:
118 mm²
BIOS Version:
013.012.000.031.000000 (113-667ZWF71-113-AD28900-X00-XF)
Device ID:
1002 - 6758
Bus Interface:
PCI-E 1.1 x16 @ x16 1.1
Subvendor:
XFX Pine Group (1682)
ROPs:
8
Shaders:
480 (DX 11.0)
Pixel Fillrate:
2.0 GPixel/s
Texture Fillrate:
6.0 GTexel/s
Memory Type:
GDDR5
Bus Width:
128 bit
Memory Size:
1024 MB
Bandwidth:
64.0 GB/s
Driver:
atiumdag 8.950.0.0 / Win7 64
GPU Clock:
250 MHz
1000 MHz
Default Clock:
800 MHz
1000 MHz
Overclock:
+-69%

Satellite A60: ATI graphics driver issue - blue screen error

Hello,
I have a Sattelite A60, and I have had it for a year, and now suddenly, I have frequent crashes. The Blue Screen of Death tells me that it is caused by a driver not working properly, namely an ATI driver.

I deinstalled the display drivers and for a short while it seemed to work. However, the blue screen of death did not reappear, but now my laptop suddenly switches itself off: immediate powerdown. Also, I have had the driver failing to work properly: this resulted in the screen resolution suddenly resetting itself to safe mode. De blue screen I got before mentioned that the fault lay in ati2dvag.dll - the windows error analysis screen that appeared after my reboot told me that the problem with this dll again caused the problem. This was before and after the reinstall of the Toshiba drivers.
Going to try and reinstall them again now. See if it works this time.

[solved]X11: MGA driver issues: video playback (mplayer) and 3D

Hello,
I am new to Arch, but I am not new to Linux. I installed Arch yesterday, before I was experimenting with it in VirtualBox and -to test the compatibility with my real hardware- I also tried the "Archie" live CD.
But there was one thing that the combination of VirtualBox and Archie could not test: the X Window System itself, because in Archie there was an older and VESA-only version and you could not upgrade it and VirtualBox was, well, virtual.
I have a Matrox card G550, so I installed the xf86-video-mga package. At first it did not work at all (blank screen), but when I switched the console from framebuffer to "normal" text mode it started working, but...
1) the 3D performance (glxgears) is about half of the FPS I got on my previous Linux system
2) when I tried to play video with mplayer, xine or vlc, there was blue screen instead of the picture. - I can send you a screenshot, but it's just a blue box where the picture should be
I discovered, that this bluescreen thing is "solved" with some arcane xorg.conf option I discovered with "man mga" - in fact, I tried each of the options in hope for this to fix:
Option "ShadowFB" "on"
but this thing slows the 3D performance even more, so the OpenGL version of Doom is not playable any more :(
Also the mplayer itself behaves differently than on my old Linux: When I resize the window or go fullscreen, on the old system it resized or fullscreened the entire picture and now just the window is bigger and the picture remains the same. I solved this with -vo sdl, but it seems the picture has poorer quality in this case
at all, I think something is missing in the xorg configuration, because the mplayer and 3D behavior suggest so.
here is my config:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/artwiz-fonts/"
EndSection
Section "Module"
Load "xtrap"
Load "dbe"
Load "GLcore"
Load "extmod"
Load "record"
Load "dri"
Load "glx"
#Load "freetype"
#Load "type1"
#Load "v4l"
#Load "drm"
#Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us,cz_qwerty"
Option "XkbModel" "pc104"
Option "XkbOptions" "grp:alt_shift_toggle,grp:switch,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
DisplaySize 380 300 # mm
Identifier "Monitor0"
VendorName "BNQ"
ModelName "BenQ FP91G+"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 83.0
VertRefresh 43.0 - 76.0
Option "DPMS"
UseModes "Modes[0]"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "HWcursor" # [<bool>]
#Option "PciRetry" # [<bool>]
#Option "SyncOnGreen" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "Overlay" # [<str>]
#Option "MGASDRAM" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "ColorKey" # 
#Option "SetMclk" # <freq>
#Option "OverclockMem" # [<bool>]
#Option "VideoKey" # 
#Option "TexturedVideo" # [<bool>]
#Option "Int10" # [<bool>]
#Option "AGPMode" # 
#Option "AGPSize" # 
#Option "DRI" # [<bool>]
#Option "OldDmaInit" # [<bool>]
#Option "ForcePciDma" # [<bool>]
#Option "AccelMethod" # [<str>]
Identifier "Card0"
Driver "mga"
VendorName "Matrox Graphics, Inc."
BoardName "MGA G550 AGP"
BusID "PCI:1:0:0"
Option "HwCursor" "off" #protoze jinak tam neni
Option "DRI" "on"
Option "ShadowFB" "on" #jo ale pomalejsi 3D
#Option "OldDMAInit" "on"
Option "AGPMode" "4"
#Option "TexturedVideo" "on" #nefunguje
Option "AccelMethod" "EXA"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync
-vsync
ModeLine "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
I use 16bpp because 24bpp is slower...
thank you in advance,
Daniel
Last edited by danielsoft (2008-03-04 16:21:17)

the solution was to downgrade the x server and matrox drivers
(I found the old packages at http://mir2.archlinuxfr.org/archlinux/c … i686.old/)
the following packages were downgraded:
xf86-input-keyboard-1.1.1-1.pkg.tar.gz
xf86-input-mouse-1.2.1-1.pkg.tar.gz
xf86-video-mga-1.4.6.1-1.pkg.tar.gz
xorg-server-1.2.0-5.pkg.tar.gz
xorg-xkb-utils-1.0.2-2.pkg.tar.gz

[SOLVED] second hard drive issue

Hello all,
I am new to Arch. I have used the buntus, mandriva, opensuse, and a few others. however after much reading I feel Arch will be the linux I want to continue to use.
Setting it all up was going great. I was following the beginners guide and all was good. i installed kde rebooted logged in and was quite impressed with it all working. Then it happened.
I shutdown and attached my 80gig ide drive that holds my important files. What I usually do is then copy them to my home directory and then shutdown and remove the drive. I don't want to keep my 80gig in the system as it is on its last legs and is only a tmp storage for a couple weeks.
with that I the rebooted my machine and when i click on volume in file manager I get :
An error occured while accessing 'Volume (ext3)', the system responded:
org.freedesktop.Hal.Device.PermisionDeniedByPolicy:
org.freedesktop.hal.storage.mount-fixed
auth_admin_keep_always
Now I have been thru many threads changing policykit and been thru the hal wiki and well I just can't seem to find the solution.
thanks for the help.
Last edited by marduik (2009-02-18 22:38:19)

ok i finally got it to workl for me .
in /etc/dbus-1/system.d/hal.conf :
<policy user="0">
<allow send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
<allow send_interface="org.freedesktop.Hal.Device.VideoAdapterPM"/>
<allow send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
<allow send_interface="org.freedesktop.Hal.Device.Volume"/>
<allow send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
</policy>
made sure to change user="0" to user="myusername"
in /etc/PolicyKit/PolicyKit.conf .. making sure $USER was changed to my user name
<match user="$USER"> 
<match action="org.freedesktop.hal.storage.*">
<return result="yes"/>
</match>
<match action="hal-storage-mount-fixed-extra-options"> 
<return result="yes" />
</match>
<match action="hal-storage-mount-removable-extra-options"> 
<return result="yes" />
</match>
</match> 
then I rebooted and all was well again in the universe. And now I can definately say that Archlinux is a fantastic distro and I also am liking the documenttation and forums for it too. Hats off to the community.

[SOLVED][ati catalyst]amdcccle won't start anymore

Hey all,
I spent all the day working on my MSI GX60 equiped with
[jledun@io0 ~]$ lspci | grep VGA
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G]
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Neptune [Radeon HD 8970M] (rev ff)
Everything was running fine until today.
To show something to my son, I tried to run a VirtualBox machine but it couldn't because :
'Your machine tries to run 3D acceleration but 3D is not defined on your host' or something like that.
So I tried to run 'sudo amdcccle' or 'kdesu amdcccle', no way, it doesn't start.
I don't have any error displaying in my cli.
I just can kill it after a few minutes.
I've read somewhere on an ubuntu forum that it was necessary to install qt, so I did but it changed nothing.
I really need my virtual machines, that's windows 7 and XP clients, if I deactivate 3D acceleration in configuration, I guess windows won't like it...
Help !
Last edited by dun32 (2013-12-21 13:22:28)

I followed wiki for uninstall catalyst, reboot, then clean install of catalyst, reboot, it's the same.
But I've found a way to make it work : disable lxdm and reboot.
Then I remove /etc/ati/amdpcsdb at each boot, before running startx. Then I'm able to open amdcccle, check configuration, fglrxinfo gives :
[jledun@io0 ~]$ fglrxinfo
display: :0 screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 8650G
OpenGL version string: 4.3.12614 Compatibility Profile Context 13.25.18
If I reboot again, the problem appears again, then I kill X, remove /etc/ati/amdpcsdb again and it works.
I'm going to see if the problem is the same with razor-qt.

[SOLVED] ATI catalyst problems

I just did a pacman -Syu and ran into problems with my ATI radeon hd 7870 card.
After reboot, I noticed that my GPU fan speed was too loud because this command does not work anymore:
aticonfig --pplib-cmd "set fanspeed 0 25"
PPLIB command execution has failed!
ati_pplib_cmd: execute "set" failed!
Other commands fail too:
aticonfig --od-gettemperature
ERROR - Get temperature failed for the Default Adapter - AMD Radeon HD 7800 Series
Also, when I move windows around in Gnome (fallback mode), or when I scroll in gedit, the movement is not smooth, you can see how they redraw at their new position slowly.
I am not experienced with catalyst troubleshooting. Is there any guidance on how to find out what's wrong?
PS:
I just found this in the Xorg log file:
[ 2.672] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible.
[ 2.672] (WW) fglrx(0): ***********************************************************
[ 2.672] (WW) fglrx(0): * DRI initialization failed *
[ 2.672] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 2.672] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 2.672] (WW) fglrx(0): ***********************************************************
Thanks in advance
Last edited by wombat23 (2013-01-22 11:35:14)

foutrelis wrote:
Assuming you're using catalyst-dkms from [community], you will need to enable the dkms service in order for the fglrx module to be rebuilt for Linux 3.7.
More info: https://wiki.archlinux.org/index.php/Dy … figuration
Yes, I use calalyst-dkms.
I enabled dkms.service and rebooted, but the problem persists:
dkms.service - Dynamic Kernel Modules System
Loaded: loaded (/usr/lib/systemd/system/dkms.service; enabled)
Active: active (exited) since Die 2013-01-22 12:20:00 CET; 2min 10s ago
Process: 261 ExecStart=/usr/lib/systemd/scripts/dkms start (code=exited, status=0/SUCCESS)
Jan 22 12:19:57 lacandona dkms[261]: DKMS: build completed.
Jan 22 12:19:57 lacandona dkms[261]: fglrx.ko:
Jan 22 12:19:57 lacandona dkms[261]: Running module version sanity check.
Jan 22 12:19:57 lacandona dkms[261]: - Original module
Jan 22 12:19:57 lacandona dkms[261]: - No original module exists within thi...el
Jan 22 12:19:57 lacandona dkms[261]: - Installation
Jan 22 12:19:57 lacandona dkms[261]: - Installing to /usr/lib/modules/3.7.3...s/
Jan 22 12:20:00 lacandona dkms[261]: depmod....
Jan 22 12:20:00 lacandona dkms[261]: DKMS: install completed.
Jan 22 12:20:00 lacandona systemd[1]: Started Dynamic Kernel Modules System.

Ati catalyst 4.4 and up won't install

I can't install any Ati catalyst driver versions above 4.4, I have a Gecube Radeon 9800XTreme and a Gecube 9200Se and drivers up to and including catalyst 4.3 install fine with either card but any version above gives message "Setup was unable to find components that can be installed on your current hardware or software configuration. Please make sure you have the required hardware or software." Same goes for any of the modded drivers in those versions. All works fine in my other Asus Amd based computer. Any one else had these issues and maybe a solution.

If you are trying to install Control Panel you need to have Microsoft .net framework installed first.

Gnome 3 striped panel using Catalyst driver

I'm currently using the properietary ati catalyst driver by necessity, not choice. The open source driver does not have good power management and in particular will not control the fan properly. This is a well known bug and has been acknowledged on this and other forums often. Honestly, the only reason I can think of for anybody using the open source ati driver is if they 1) have an old gpu 2) are using a desktop pc and don't notice the sound 3) notice the sound and heat but know no better. After installing gnome 3, the panel ends up looking like this:
which isn't even my screenshot. This was posted on a stackexhange forum and the solution provided was to simply use the open source drivers.
I'm hoping that someone here has found the correct solution, although I'm not even sure if one exists yet. It's just incredibly strange that gnome 3 would have this sort of problem when no other panel I know of, including Unity, does.

I have seen enough of this. Conclusion is, if you have to use Catalyst (properietary), forget about GNOME Shell for a while. Not only that top panel, but also there exists several corruptions here and there with Mutter(?) + Catalyst. Use the fallback mode if you can't get any further, or better use Compiz+Cairo-Dock to completely replace the GNOME window manager in GNOME/GTK3.
Even if you can get the shell working, it's not worth using it at this stage. Check later.

Xorg update seems to break ATI Catalyst

Hi all
Just a quick note for users of the proprietary ATI Catalyst driver, the latest Xorg update seems to break it (at least on my system).
Boot sequence proceeds as normal until GDM loads, then the screen oscillates slowly between black and white.
Any suggested fix?

Hi there
Did Pacman upgrade your kernel alongside Xorg?. Maybe you need to rebuild the fglrx module.
Best of Luck

[SOLVED] ATI Driver Catalyst installation problems.

I am having real trouble installing the official catalyst drivers. I followed both these guides with noavail. http://www.neuraladvance.com/installing … linux.html and http://www.ramblgyrl.com/2014/11/instal … rch-linux/.
When I finish installing it just holds at the end of the boot cycle with no error I can only TTY into the system. Im not really sure what outputs you require but ill post a lspci.
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6620G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Whistler [Radeon HD 6630M/6650M/6750M/7670M/7690M] (rev ff)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
04:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
Last edited by moosethemucha (2015-02-05 12:26:21)

So I've been playing around. I have found other forum posts referring to my problem ( [link] https://bbs.archlinux.org/viewtopic.php?id=141130 [/link] ). I tried to install the drivers form the zip directly from the ATI website. I recieved this log file from the installer:
Supported adapter detected.
Detected a previous installation, /usr/share/ati/amd-uninstall.sh
Dryrun uninstall succeeded continuing with installation.
Check if system has the tools required for installation.
Uninstalling any previously installed drivers.
Forcing uninstall of AMD Catalyst(TM) Proprietary Driver.
No integrity verification is done.
restore of system environment completed
Uninstall fglrx driver complete.
For detailed log of uninstall, please see /etc/ati/fglrx-uninstall.log
System must be rebooted to avoid system instability and potential data loss.
/usr/share/ati/amd-uninstall.sh completed with 0
Unloading radeon module...
rmmod: ERROR: Module radeon is in use
Unloading drm module...
rmmod: ERROR: Module drm is in use by: ttm drm_kms_helper radeon
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/3.18.4-1-ARCH/build SUBDIRS=/usr/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory '/usr/lib/modules/3.18.4-1-ARCH/build'
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
/usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_GetEffectiveUid’:
/usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:1787:5: error: incompatible types when returning type ‘kuid_t’ but ‘KCL_TYPE_Uid’ was expected
return current_euid();
^
/usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:1793:1: warning: control reaches end of non-void function [-Wreturn-type]
^
scripts/Makefile.build:257: recipe for target '/usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o' failed
make[2]: *** [/usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o] Error 1
Makefile:1381: recipe for target '_module_/usr/lib/modules/fglrx/build_mod/2.6.x' failed
make[1]: *** [_module_/usr/lib/modules/fglrx/build_mod/2.6.x] Error 2
make[1]: Leaving directory '/usr/lib/modules/3.18.4-1-ARCH/build'
Makefile:88: recipe for target 'kmod_build' failed
make: *** [kmod_build] Error 2
build failed with return value 2
[Error] Kernel Module : Failed to compile kernel module - please consult readme.
Also this is a copy of my xorg.conf file that was created when running ati-config.
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:0:1:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
also this when i run aticonfig --list-adapters
* 0. 00:01.0 AMD Radeon HD 6620G
* - Default adapter

[SOLVED] Dual-Screen Setup with ATI Catalyst

I'm having a beast of a time trying to set up X to work on my two screens.
Screen 1 is a 23" screen connected with a DVI cable. My preferred resolution for this one is 1920x1080. Screen 2 is a 17" screen (4:3) connected with a VGA cable. My preferred resolution for this one is 1280x960.
I tried using "aticonfig --initial=dual-head". This does not produce a working xorg.conf file. Specifically, my smaller monitor simply complains about not being able to display the given video mode. Running xrandr (from the main screen) shows only that output as being "connected" - the rest of them (including the CRT outputs which seem to correspond to the VGA port) as "disconnected".
I've spent about 5 hours searching for an answer to this, and the only ones I seem to be able to find are nvidia-specific.
I have an ATI Radeon HD 4850 or 4870 - I honestly forget which, although the drivers should be the same. I'm using the catalyst driver from the AUR, because I'd like to have 3D acceleration.
I've read through the entire xorg.conf man page, and tried a few things from there (including writing my own xorg.conf from scratch). Unfortunately, this seems incredibly useless, as the man page doesn't list any of the options that I seem to need (for example, I've read about and tried the "PairModes" option under "Device").
I can probably eventually figure this out, but it would be nice to have a few pointers. For example:
Should I have one or two "Device" sections in xorg.conf? Should I have one or two "Screen" sections in xorg.conf? Where can I find a full list of possible "Option" keys, at least for the Device section? Should I be using Xinerama (I've tried with and without, to no avail).
EDIT: I solved this by using the aticonfig tool some more, and not by messing around with xorg.conf. Specifically, the command:
aticonfig --initial=dual-head --xinerama=on --resolution=0,1920x1080 --resolution=1,1280x960 --screen-layout=right
I'll leave this here in the hopes that it can help someone else.
Last edited by Tempest (2011-08-06 02:28:41)

If you aren't playing games, it may be worth it to check out xf86-video-ati. Then you can configure your displays the standard way with xrandr.

[SOLVED] ATI Catalyst Driver Issues

Similar Messages

Maybe you are looking for