[Solved] Can boot fine, but all TTYs are frozen at UDev

I've only noticed this recently when I was trying out some new WMs, and tried to change back to openbox.
I'm using the catalyst driver from the catalyst repo.
Upon boot, everything works fine. The first few outputs are at a stupid resolution, but when it hits the "Udev processing" part, it swaps to the proper resolution, and boots just fine.
However, when I try to access one of the TTYs, they are all still stuck at the silly resolution, with the status of the Udev statement stuck at [Busy]. I then can't swap back to X.
Here is my /etc/inittab:
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:5:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
#x:5:respawn:/bin/su iain -l -c "/bin/bash --login -c /usr/bin/startx >/dev/null 2>&1"
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >& /dev/null
#x:5:respawn:/usr/sbin/lightdm 2>&1 /dev/null
# End of file
Can anyone help?
Thanks,
pritchard92
Last edited by pritchard92 (2012-04-12 15:56:06)

I own an Nvidia card, so I can't help you much, but according to the Catalyst wiki page, "xorg-server 1.12 is in [extra] repo, catalyst does not support it so please use [xorg111] repo]". So you *do* have Xorg v1.11, right?
$ pacman -Qi xorg-server
You should try the open source radeon driver instead. Or are you that much into gaming on Linux? Open source drivers offer some 3D support but for gaming you're probably better off dual booting with Windows. By switching to radeon you'll also get rid of that "silly resolution", as catalyst doesn't support KMS.
PS: Here's my /etc/inittab:
id:3:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
c1:2345:respawn:/sbin/agetty --noclear -n -l /usr/local/sbin/autologin -s 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 -s 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 -s 38400 tty3 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
I got rid of those newbie comments a long time ago.
By having just 3 tty's it keeps my X session on Ctrl+Alt+F4 (because sometimes I find it frustrating to cop a feel for my F7 - especially in the dark, as I have a black keyboard...). The "-n -l /usr/local/sbin/autologin" part is from this wiki page: https://wiki.archlinux.org/index.php/Au … al_console (C login program) and the "--noclear" parameter removes some of the flickering during boot (the boot messages stay on screen).
Last edited by DSpider (2012-04-06 08:58:27)

Similar Messages

HT1657 We just downloaded a movie from Itunes but the picture is completely scrambled. Audio is fine but all you can see are funny color pixels on the screen..how do we fix this?e

We just downloaded a movie from Itunes but the picture is completely scrambled. Audio is fine but all you can see are funny color pixels on the screen..how do we fix this?

The movie is from iTunes. You would think that a download from iTunes to a MacBook could be watched on an HDTV using Apple TV without any headaches bit this does not appear to be the case.

I have noticed an issue with utilizing the "stream" function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clea

I have noticed an issue with utilizing the “stream” function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clearly see that storage has been reduced under the usage, yet under the “videos” tab it still states “No Data” the only way to delete what you have partially downloaded is to fully download the video, which is fine but there is no way to tell what videos have been partially downloaded (I.e which occurs a lot when your child switches between movies using the so called “stream” function). This becomes troublesome once the capacity of the ipad is almost met and you have no way to delete this data since you may have several videos that have started to be viewed (hence partially downloaded). Apple needs to somehow make it truly streaming or provide an update so the storage can be managed. The only way I have been able to remove partially downloaded videos is by doing a total software restore. (The video data that is in question when connected to my MacBook shows up in iTunes as “other”) if you have any insight into this issue it would be greatly appreciated. Thanks.

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post. 
Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

When I print to pdf on Mac, the first page comes out fine but all the rest are magnified and shifted up and right

I click File>Print. Whether I open pdf in Preview, save to pdf, or just print, I get this error. The first page is fine, but all the rest are shifted up and to the right and magnified.
I've never been able to print out a multi-page document on Firefox with my new computer. I can copy/paste the address to Safari (gross) and it prints just fine, either to pdf or to a hard copy.
Save me from having to use Safari!

Making sure the fonts were embedded helped some, but it's still hit and miss. Sometimes I'm still missing pieces. One workaround I have found that works is just print one page without security to PDF, and then go back and replace the bad page(s) with them. So it will print properly, just not all the time. I have a copy of a word page and then what acrobat did to it. I just need to figure out how to post it here.
Kim

I am using Adobe Photshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.

I am using Adobe Photoshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.. How do I get them back?

Hi,
Which operating system are you running on?
The date & Time can be displayed by going to the View menu and checking Details - also File Names if you want them displayed.
The Album information is saved within the catalog so it sounds as though you didn't do a catalog backup on the old computer and a catalog restore on the new computer which is the recommended way of transferring elements data. Did you just copy the photos over?
Brian

When I make a call the person can hear me but all I hear are high pitched screaches

Hi, Can anyone help me - When i make a call the other person can hear me fine but all I hear are high pitched screaches?

SouthernJo, Let's make sure your phone is connected properly! Blue lights are usually a good sign. LCan you please dial #48 on your handset to ensure you're connected http://vz.to/1BbtYmA? What message do you hear when doing so? We'll figure this out, together.
TanishaS1_VZW
Follow us on Twitter @VZWSupport

I just installed ios7 on my iPhone 4s. It seems to be working fine but all of the apps I had previously installed are gone. They show up in my app store as purchased, but the shortcuts are gone. Does anyone know how to get the shortcuts back? Thanks!

I just installed ios7 on my iPhone 4s. It seems to be working fine but all of the apps I had previously installed are gone. They show up in my app store as purchased, but the shortcuts are gone. Does anyone know how to get the shortcuts back? Thanks!

I updated via my iPhone 4s. The apps were on my iPhone 4s. That's all the information that I have. The update to ios7 seems to have gone smoothly - everything else is working, phone texting, email, internet, etc. But all of the apps I had installed over the past year are no longer showing up as shortcuts. No facebook, no twitter, no espn, etc. They are all still listed in my app store as purchased, but the shortcuts and my folders are gone. Thanks.

I needed memory to upgrade so I exported all of my iphoto to an external hard drive. The photos are fine but the videos are blank. I emptied the trash. Is there any way to recover the videos?

I needed memory to upgrade so I exported all of my iphoto to an external hard drive. I then deleted and emptied the trash. The photos are fine but the videos are blank. Is there any way to recover the videos? Any software recovery programs apple supported?

no official way but if you open the Apple TV and put the hd in the external case it should mount and give you access to the data on it

My Nano 5th g battery was dead, I charged and it play fine but all written material ie play list, music, albums, etc. are backwards. Help please. Tx Tom

My Nano 5th g battery was dead. After charged play fine but all written content in menus and songs is backwards.Help please.

Try resetting the Nano first to see if that helps. To do this, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
If the issue persists, connect the iPod to your iTunes library and restore it to factory settings.
B-rock

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck.

I had to reinstall ox and snow leopard on my imac g5. I used the migration assistant on my macbookpro to copy everything onto the imac. The apps came in fine, but all folders say "no access." None of my user names seem to work. What now?

My iMac G5 was running too slow. I tried everything I could think of or find in the literature, but finally had to start over by reinstalling OX and then Snow Leopard. I lost all my folders and applications, so I used the Migration Assistant on my MacBookPro to copy everything onto the iMac G5. The applications all came through fine, but all of my folders have the "no access" icon on them. I followed the instructions I found on line, but none of my user names worked. What do I do now? Am I just out of luck? The only other alternative I can see is to transfer all my folders onto a thumb drive and put them into the iMac, but that will be slow and cumbersome.

Are you now using a different username from the one you used prior to migrating? If so that is the reason for the problem. You might, then, give this a try:
To fix Home folder permissions
Open the Terminal application in the Utilities folder. At the command line prompt enter or paste the following command line:
sudo chown -R `id -un`:`id -gn` ~
Press RETURN. You will be prompted to enter your admin password which will not be echoed.

I have burned a CD and the first 1/2 of the songs sound fine but the rest are not clear

I have burned a CD and the first 1/2 of the songs sound fine but the rest are not clear, they have a skipping sound to them. I have erased teh CD-RW and tried again and it was somewhat better but the last few songs did the same thing.

Jennann,
First of all, it is better to use CD-Rs than CD-RWs, as the latter often give problems when used for audio CDs.
The problem you describe -- bad audio on the later tracks of an audio CD -- can almost always be corrected by doing the burn at a much lower burn speed. Use 2x.
The burn speed is selected in the dialog box that comes up when you request the burn. It defaults to "Maximum Possible," but there is a dropdown to select a lower value.

Yesterday i bought ipad4 i transfered photos from pc to ipad that it opened in ipad when i click slideshow everything went black. whenever i m opening the application(photos) full screen looking black but all photos are occuping memory.

yesterday i bought ipad4 i transfered photos from pc to ipad that it opened in ipad when i click slideshow everything went black. whenever i m opening the application(photos) full screen looking black but all photos are occuping memory.i can see the pictures in settings>brightness>wallpapers but i couldnt able to see in photos application in ipad4

I have several thousand photos in several folders. I have noticed that whenever I want to change the folder used as the side show source, it takes the Screen Saver Preference pane a very long time to respond. It is as if it is scanning all the photos in the currently assigned folder in order to display them in the preview window provided, and it gets so dogged down doing that it can't respond to my clicks on the Choose Folder option.
Assuming you don't want to redistribute your photos into a greater number of folders or subfolders so there would be fewer in each folder to process, you could try a workaround. Try moving your currently-assigned folder to your desktop temporarily, before opening the Screen Saver preference pane. If the preference pane can't find the old folder, it may immediately ask you to choose a new one. You could hopefully then do so, close the preference pane, and then put back the old folder.
It's my understanding that there will be no future updates to Tiger, only security fixes.

I have pages setup for english but all templets are in spanish

Hello everyone
After trying to reset keyboard preferances and services I am not getting any solution.
I have pages setup for english but all templets are in spanish.
can anyone help to fix this problem?
Thanks
dsd

You mean this?
Sociis mauris in integer, a dolor netus non dui aliquet, sagittis felis sodales, dolor sociis mauris, vel eu libero cras. Interdum at. Eget habitasse elementum est, ipsum purus pede porttitor class, ut adipiscing, aliquet sed auctor, imperdiet arcu per diam dapibus libero duis. Enim eros in vel, volutpat nec pellentesque leo, temporibus scelerisque nec. Ac dolor ac adipiscing amet bibendum nullam, massa lacus molestie ut libero nec, diam et, pharetra sodales eget, feugiat ullamcorper id tempor eget id vitae. Mauris pretium eget aliquet, lectus tincidunt. Porttitor mollis imperdiet libero senectus pulvinar. Etiam molestie mauris ligula eget laoreet, vehicula eleifend. Repellat orci eget erat et, sem ***, ultricies sollicitudin amet eleifend dolor nullam erat, malesuada est leo ac. Varius natoque turpis elementum est.
A: It's Latin, not 'Spanish.'
B: What problem?
Click on this Placeholder text to select it (All of it will be selected on a single click).
Type.
On the first kaystroke, all of the placeholder text is deleted and the first typed character appears.
Carry on.
Images in the templates are media placeholders. Replace them with your images in a similar manner.
For more on placeholder text, see page 75 of the Pages '09 User Guide; for more on media placeholders, see page 137.
The guide may be downloaded via the Help menu in Pages '09.
Regards,
Barry

HT3702 I am being charge for itunes but all apps are free?

I am being charge for itunes but all apps are free? It is possible to get money back?

If you are referring to the temporary store holding charge as described on the page that you posting, which is 'charged' each time that you change the card details on your account, then it should disappear off the card within a few days or so - though it varies by bank, and with it now being the weekend it might an extra day or two. If they haven't disappeared within a week of them being made then you could contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Also some apps may be free to download but they then allow you to make in-app purchases to unlock extra features within them - you can turn off in-app purchases via Settings > General > Restrictions on your phone.

[Solved] Can boot fine, but all TTYs are frozen at UDev

Similar Messages

Maybe you are looking for