[SOLVED] Choppy sound with Intel audio card

Ever since I bought this laptop and installed Arch, I have experienced this annoying choppiness.
What happens is that when I highlight other windows, under the minimum memory/cpu load the sound is truncated. I can't listen to music pleasantly on my laptop, and I can't stand it.
My laptop is a HP 530, with an integrated Intel audio card. This is the output from hwd -s:
Sound(a) : 82801G ICH7 Family High Definition Audio Controller module: snd-hda-intel
I have 1Gb of RAM, and the processor doesn't seem very busy when the sound is truncated. This happens under any DE/WM - even in tty!
For what is worth, I had problems with the speakers not muting when the headphones were plugged in, and I have followed the method indicated here.
Thanks for your time.

Auto is the default, it might not be resolving the model correctly (that's the case with my laptop).  Try model=hp.
If that doesn't work, you could try turning off power saving:
options snd-hda-intel power_save=0

Similar Messages

  • My ProFire 610 is not working with the OS X Yosemate what do i have to do now with my audio card?

    My ProFire 610 is not working with the OS X Yosemate what do i have to do now with my audio card?

    Power cycle the cable modem.. you may try leaving it off 5min.. might be enough.. sometimes you need 15min or even longer.. Followed by power cycle of the AE.
    Nothing else should be connected to the modem.. except the router that will get the public IP as they only hand out ONE>

  • [SOLVED]No Sound with ALSA - Intel Corporation 82801G HD Audio

    Hey all,
    I've succesfully installed Arch Linux. My past two attempts have met with failure, all because of my own failure to read and follow directions correctly. This time everything is installed correctly. I am running Kdemod3 on my laptop with Arch and everything works great. I LOVE Pacman and the simplicity of Arch's configuration files. It's super fast and all together simple. My only remaining problem is this:
    My sound with ALSA is not functioning. I followed the installation instructions at the arch wiki and after unmuting all of my channels I still would not get any sound. My sound module is snd_hda_intel and it is detected, loaded and the whole nine yards (as far as I can tell). My user is a member of the 'audio' user group also. I looked at the troubleshooting tips on the bottom of the Wiki but decided not to try them as they do not seem to pertain to my card (snd_hda_intel) but I will try them if anyone would like me to.
    If anyone has any ideas, they'd be greatly appreciated!:D Anything I can provide that you need I will be more than willing to provide.
    Thanks for such a great distribution,
    Dan
    Last edited by JazzDan (2008-06-29 05:06:35)

    Problem resolved. I ran alsaconf, selected my soundcard, and everything was working from there out. Thanks MisfitI38 on the IRC!!!

  • [SOLVED] No sound with Asus Xonar DGX

    I've got no sound so I've looked into journalctl and there were some bluez and pulseaudio related erros. So i.a.w. this topic https://bbs.archlinux.org/viewtopic.php?id=155714 I did `systemctl enable bluetooth.service`. No more errors but still no sound.
    Other things I did:
    - unplug/plug headphones
    - check whether anything is muted in alsamixer and the gnome sound applet (note: nothing is greyed-out, microphone picks up signals)
    snd_oxygen i.e. ASUS XONAR is the sound card I would like to use and I hook my headphones to.
    # cat /proc/asound/cards
    0 [DGX ]: CMI8786 - Xonar DGX
    C-Media Oxygen HD Audio at 0xee00, irq 17
    1 [HDMI ]: HDA-Intel - HDA ATI HDMI
    HDA ATI HDMI at 0xfd7fc000 irq 30
    # lsmod | grep '^snd' | column -t
    snd_hda_codec_hdmi 49263 1
    snd_hda_intel 26387 2
    snd_hda_controller 26857 1 snd_hda_intel
    snd_oxygen 23783 2
    snd_hda_codec 112621 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller
    snd_oxygen_lib 36709 1 snd_oxygen
    snd_hwdep 17244 1 snd_hda_codec
    snd_mpu401_uart 13507 1 snd_oxygen_lib
    snd_rawmidi 26806 1 snd_mpu401_uart
    snd_seq_device 13307 1 snd_rawmidi
    snd_pcm 88779 5 snd_hda_codec_hdmi,snd_oxygen_lib,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 73436 19 snd_oxygen,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_oxygen_lib,snd_hda_codec,snd_hda_intel,snd_mpu401_uart,snd_seq_device
    # journalctl -b | grep -i bluez
    Apr 26 12:13:52 arch1411 dbus[326]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
    Apr 26 12:13:52 arch1411 dbus[326]: [system] Successfully activated service 'org.bluez'
    Apr 26 12:14:31 arch1411 /usr/lib/gdm/gdm-x-session[359]: Activating service name='org.bluez.obex'
    Apr 26 12:14:31 arch1411 /usr/lib/gdm/gdm-x-session[359]: Successfully activated service 'org.bluez.obex'
    [root@arch1411 hg1]# journalctl -b | grep -i audio
    Apr 26 12:13:50 arch1411 kernel: snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 431 of process 431 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 456 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 497 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 498 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 15:37:00 arch1411 vlc.desktop[876]: [00007ffabc009ee8] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer
    Apr 26 15:37:02 arch1411 vlc.desktop[876]: [00007ffae0c244f8] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer
    # systemctl status pulseaudio.service
    ● pulseaudio.service
    Loaded: not-found (Reason: No such file or directory)
    Active: inactive (dead)
    # systemctl start pulseaudio.service
    Failed to start pulseaudio.service: Unit pulseaudio.service failed to load: No such file or directory.
    Should I proceed per https://bbs.archlinux.org/viewtopic.php?id=149501 and remove pulseaudio daemon from the /etc/rc.conf file?
    Last edited by bbarcher (2015-05-01 07:42:36)

    systemctl --all --no-pager|grep -i pulse
    returns nothing.
    Thank you for your input, V1del.
    $ pacmd list-cards
    2 card(s) available.
    index: 0
    name: <alsa_card.pci-0000_01_00.1>
    driver: <module-alsa-card.c>
    owner module: 6
    properties:
    alsa.card = "0"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfd7fc000 irq 30"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:01:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aa88"
    device.product.name = "Barts HDMI Audio [Radeon HD 6800 Series]"
    device.string = "0"
    device.description = "Barts HDMI Audio [Radeon HD 6800 Series]"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    profiles:
    output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
    output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
    output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: unknown)
    off: Off (priority 0, available: unknown)
    active profile: <output:hdmi-stereo>
    sinks:
    alsa_output.pci-0000_01_00.1.hdmi-stereo/#0: Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)
    sources:
    alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#0: Monitor of Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)
    ports:
    hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
    properties:
    device.icon_name = "video-display"
    index: 1
    name: <alsa_card.pci-0000_04_04.0>
    driver: <module-alsa-card.c>
    owner module: 24
    properties:
    alsa.card = "1"
    alsa.card_name = "Xonar DGX"
    alsa.long_card_name = "C-Media Oxygen HD Audio at 0xee00, irq 17"
    alsa.driver_name = "snd_oxygen"
    device.bus_path = "pci-0000:04:04.0"
    sysfs.path = "/devices/pci0000:00/0000:00:05.0/0000:03:00.0/0000:04:04.0/sound/card1"
    device.bus = "pci"
    device.vendor.id = "13f6"
    device.vendor.name = "C-Media Electronics Inc"
    device.product.id = "8788"
    device.product.name = "CMI8788 [Oxygen HD Audio]"
    device.string = "1"
    device.description = "CMI8788 [Oxygen HD Audio]"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    profiles:
    input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
    output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
    output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
    off: Off (priority 0, available: unknown)
    active profile: <output:analog-stereo+input:analog-stereo>
    sinks:
    alsa_output.pci-0000_04_04.0.analog-stereo/#1: CMI8788 [Oxygen HD Audio] Analog Stereo
    sources:
    alsa_output.pci-0000_04_04.0.analog-stereo.monitor/#1: Monitor of CMI8788 [Oxygen HD Audio] Analog Stereo
    alsa_input.pci-0000_04_04.0.analog-stereo/#2: CMI8788 [Oxygen HD Audio] Analog Stereo
    ports:
    analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-input-microphone"
    analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-input-microphone"
    analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: unknown)
    properties:
    analog-input-aux: Analog Input (priority 8000, latency offset 0 usec, available: unknown)
    properties:
    analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-headphones"
    $ pacmd list-sinks
    2 sink(s) available.
    index: 0
    name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9050
    volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 0
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
    card: 0 <alsa_card.pci-0000_01_00.1>
    module: 6
    properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "HDMI 0"
    alsa.id = "HDMI 0"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "3"
    alsa.card = "0"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfd7fc000 irq 30"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:01:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aa88"
    device.product.name = "Barts HDMI Audio [Radeon HD 6800 Series]"
    device.string = "hdmi:0"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "hdmi-stereo"
    device.profile.description = "Digital Stereo (HDMI)"
    device.description = "Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)"
    alsa.mixer_name = "ATI R6xx HDMI"
    alsa.components = "HDA:1002aa01,00aa0100,00100200"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    ports:
    hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
    properties:
    device.icon_name = "video-display"
    active port: <hdmi-output-0>
    * index: 1
    name: <alsa_output.pci-0000_04_04.0.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9059
    volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 1
    sample spec: s16le 2ch 48000Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1837.50 ms
    card: 1 <alsa_card.pci-0000_04_04.0>
    module: 24
    properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "Multichannel"
    alsa.id = "Multichannel"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "1"
    alsa.card_name = "Xonar DGX"
    alsa.long_card_name = "C-Media Oxygen HD Audio at 0xee00, irq 17"
    alsa.driver_name = "snd_oxygen"
    device.bus_path = "pci-0000:04:04.0"
    sysfs.path = "/devices/pci0000:00/0000:00:05.0/0000:03:00.0/0000:04:04.0/sound/card1"
    device.bus = "pci"
    device.vendor.id = "13f6"
    device.vendor.name = "C-Media Electronics Inc"
    device.product.id = "8788"
    device.product.name = "CMI8788 [Oxygen HD Audio]"
    device.string = "hw:1"
    device.buffering.buffer_size = "352800"
    device.buffering.fragment_size = "352800"
    device.access_mode = "mmap+timer"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "CMI8788 [Oxygen HD Audio] Analog Stereo"
    alsa.mixer_name = "CMI8786"
    alsa.components = "CS4245 CMI8786"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    ports:
    analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-headphones"
    active port: <analog-output-headphones>
    After all of the recommended solutions from the wiki I still get
    $ systemctl status pulseaudio.service
    ● pulseaudio.service
    Loaded: not-found (Reason: No such file or directory)
    Active: inactive (dead)
    $ pulseaudio -vvvv
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: RealtimeKit worked.
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
    D: [pulseaudio] main.c: Running on host: Linux x86_64 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
    D: [pulseaudio] main.c: Found 6 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is d36c9fa4b78f4c8cae7f7ad7897683e3.
    I: [pulseaudio] main.c: Session ID is c1.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/hg1/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    E: [pulseaudio] pid.c: Daemon already running.
    E: [pulseaudio] main.c: pa_pid_file_create() failed.
    Last edited by bbarcher (2015-04-27 19:16:41)

  • [SOLVED] No sound (with flash)

    Hello.
    I have no sound with flash. It does work elsewhere.
    I am using ALSA.
    My flash should output audio correctly according to wiki: https://wiki.archlinux.org/index.php/Fl … d_in_Flash
    # aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    EDIT: I'm retarded. I didn't add my user to audio group. And sound elsewhere was from speaker-test which needs SU.
    Last edited by handl3r (2012-01-22 07:39:34)

    codemac wrote:
    Orrrr it's because the flash plugin uses OSS.
    run `aoss firefox` and be happy.
    OSS does still work or at least the alsa backwards compatibility layer that emulates the old interfaces, right? did i miss anything?
    for newer versions of flash (like version 9) simply install firefox in wine and let it install the plugin. that usually works great!

  • [SOLVED] kernel crash with PCI wifi card

    HI,
    I id install and start to use arch just two weeks ago :-)
    I was able to solve problems until now.
    I am not sure if this is problem of arch kernel, maybe it will be general.
    I did insert PCI wifi card to my PC with arch. Card is Z-COM XI-626 : LAST LINE:
    lspci
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
    00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
    00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
    00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)
    00:1c.7 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
    00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation H67 Express Chipset Family LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
    03:00.0 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller
    04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
    06:00.0 PCI bridge: ASMedia Technology Inc. ASM108x PCIe to PCI Bridge Controller (rev 01)
    07:00.0 Network controller: Intersil Corporation ISL3874 [Prism 2.5]/ISL3872 [Prism 3] (rev 01)
    It start to work very nicely, I could connect to the network with NetworkManager in gnome.
    BUT
    after while connection is not working.
    the is in message LOG:
    Dec 6 07:53:09 localhost NetworkManager[686]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
    Dec 6 07:53:09 localhost NetworkManager[686]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
    Dec 6 07:53:09 localhost NetworkManager[686]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
    Dec 6 07:53:10 localhost NetworkManager[686]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
    Dec 6 07:53:10 localhost NetworkManager[686]: <info> Policy set 'Auto moje_wifi' (wlan0) as default for IPv4 routing and DNS.
    Dec 6 07:53:10 localhost NetworkManager[686]: <info> Activation (wlan0) successful, device activated.
    Dec 6 07:53:10 localhost NetworkManager[686]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
    Dec 6 07:53:10 localhost dbus[661]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
    Dec 6 07:53:10 localhost dbus[661]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    Dec 6 08:02:58 localhost kernel: [ 1889.872241] Pid: 0, comm: swapper Tainted: G C 3.1.4-1-ARCH #1
    Dec 6 08:02:58 localhost kernel: [ 1889.872243] Call Trace:
    Dec 6 08:02:58 localhost kernel: [ 1889.872244] <IRQ> [<ffffffff810c6cfd>] __report_bad_irq+0x3d/0xe0
    Dec 6 08:02:58 localhost kernel: [ 1889.872252] [<ffffffff810c713d>] note_interrupt+0x14d/0x210
    Dec 6 08:02:58 localhost kernel: [ 1889.872255] [<ffffffff810c5079>] handle_irq_event_percpu+0xc9/0x2a0
    Dec 6 08:02:58 localhost kernel: [ 1889.872257] [<ffffffff810c5298>] handle_irq_event+0x48/0x70
    Dec 6 08:02:58 localhost kernel: [ 1889.872259] [<ffffffff810c7a7a>] handle_fasteoi_irq+0x5a/0xe0
    Dec 6 08:02:58 localhost kernel: [ 1889.872262] [<ffffffff81016992>] handle_irq+0x22/0x40
    Dec 6 08:02:58 localhost kernel: [ 1889.872265] [<ffffffff8140d01a>] do_IRQ+0x5a/0xe0
    Dec 6 08:02:58 localhost kernel: [ 1889.872268] [<ffffffff81409c6e>] common_interrupt+0x6e/0x6e
    Dec 6 08:02:58 localhost kernel: [ 1889.872269] <EOI> [<ffffffff8131d3aa>] ? poll_idle+0x3a/0x80
    Dec 6 08:02:58 localhost kernel: [ 1889.872273] [<ffffffff8131d383>] ? poll_idle+0x13/0x80
    Dec 6 08:02:58 localhost kernel: [ 1889.872275] [<ffffffff8131d756>] cpuidle_idle_call+0xc6/0x350
    Dec 6 08:02:58 localhost kernel: [ 1889.872277] [<ffffffff81013229>] cpu_idle+0xc9/0x120
    Dec 6 08:02:58 localhost kernel: [ 1889.872280] [<ffffffff813e6912>] rest_init+0x96/0xa4
    Dec 6 08:02:58 localhost kernel: [ 1889.872282] [<ffffffff8194fc15>] start_kernel+0x3bf/0x3cc
    Dec 6 08:02:58 localhost kernel: [ 1889.872285] [<ffffffff8194f347>] x86_64_start_reservations+0x132/0x136
    Dec 6 08:02:58 localhost kernel: [ 1889.872287] [<ffffffff8194f140>] ? early_idt_handlers+0x140/0x140
    Dec 6 08:02:58 localhost kernel: [ 1889.872289] [<ffffffff8194f44d>] x86_64_start_kernel+0x102/0x111
    Dec 6 08:03:05 localhost NetworkManager[686]: <info> (wlan0): roamed from BSSID 00:19:0A:01:1A:66 (moje_wifi) to (none) ((none))
    Dec 6 08:03:05 localhost kernel: [ 1896.943757] wlan0: interrupt delivery does not seem to work
    Dec 6 08:03:07 localhost kernel: [ 1898.942477] wlan0: interrupt delivery does not seem to work
    Dec 6 08:03:10 localhost kernel: [ 1902.180399] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:12 localhost kernel: [ 1904.179118] wlan0: interrupt delivery does not seem to work
    Dec 6 08:03:14 localhost kernel: [ 1906.177838] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:16 localhost kernel: [ 1908.176557] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:18 localhost kernel: [ 1910.175277] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:20 localhost kernel: [ 1912.173997] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:22 localhost kernel: [ 1914.172716] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:24 localhost kernel: [ 1916.171436] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:26 localhost kernel: [ 1918.170157] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:28 localhost kernel: [ 1920.168875] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:30 localhost kernel: [ 1922.167595] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:32 localhost kernel: [ 1924.166315] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:32 localhost kernel: [ 1924.279547] ------------[ cut here ]------------
    Dec 6 08:03:32 localhost kernel: [ 1924.279553] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x257/0x260()
    Dec 6 08:03:32 localhost kernel: [ 1924.279555] Hardware name: System Product Name
    Dec 6 08:03:32 localhost kernel: [ 1924.279556] NETDEV WATCHDOG: wifi0 (hostap_pci): transmit queue 0 timed out
    Dec 6 08:03:32 localhost kernel: [ 1924.279558] Modules linked in: fuse ext2 mbcache snd_hda_codec_hdmi orinoco_pci orinoco cfg80211 snd_hda_codec_realtek i915 drm_kms_helper drm i2c_i801 hostap_pci hostap i2c_algo_bit i2c_core eeepc_wmi asus_wmi sparse_keymap rfkill psmouse pci_hotplug serio_raw snd_hda_intel mei(C) snd_hda_codec iTCO_wdt iTCO_vendor_support snd_hwdep snd_pcm snd_timer snd evdev r8169 mii pcspkr intel_agp intel_gtt button video lib80211 wmi processor soundcore snd_page_alloc btrfs zlib_deflate crc32c libcrc32c hid_a4tech usbhid hid sd_mod ahci pata_acpi libahci pata_via libata xhci_hcd ehci_hcd scsi_mod usbcore
    Dec 6 08:03:32 localhost kernel: [ 1924.279599] Pid: 0, comm: swapper Tainted: G C 3.1.4-1-ARCH #1
    Dec 6 08:03:32 localhost kernel: [ 1924.279600] Call Trace:
    Dec 6 08:03:32 localhost kernel: [ 1924.279602] <IRQ> [<ffffffff81061b9f>] warn_slowpath_common+0x7f/0xc0
    Dec 6 08:03:32 localhost kernel: [ 1924.279610] [<ffffffff81025047>] ? intel_pmu_enable_all+0xa7/0x110
    Dec 6 08:03:32 localhost kernel: [ 1924.279612] [<ffffffff81061c96>] warn_slowpath_fmt+0x46/0x50
    Dec 6 08:03:32 localhost kernel: [ 1924.279615] [<ffffffff8107e472>] ? __queue_work+0xe2/0x490
    Dec 6 08:03:32 localhost kernel: [ 1924.279617] [<ffffffff81364377>] dev_watchdog+0x257/0x260
    Dec 6 08:03:32 localhost kernel: [ 1924.279620] [<ffffffff81071e61>] run_timer_softirq+0x131/0x440
    Dec 6 08:03:32 localhost kernel: [ 1924.279622] [<ffffffff81364120>] ? qdisc_reset+0x50/0x50
    Dec 6 08:03:32 localhost kernel: [ 1924.279624] [<ffffffff8101c139>] ? read_tsc+0x9/0x20
    Dec 6 08:03:32 localhost kernel: [ 1924.279626] [<ffffffff810691c0>] __do_softirq+0xb0/0x270
    Dec 6 08:03:32 localhost kernel: [ 1924.279629] [<ffffffff81096158>] ? tick_dev_program_event+0x48/0x110
    Dec 6 08:03:32 localhost kernel: [ 1924.279631] [<ffffffff8109623f>] ? tick_program_event+0x1f/0x30
    Dec 6 08:03:32 localhost kernel: [ 1924.279634] [<ffffffff8140c76c>] call_softirq+0x1c/0x30
    Dec 6 08:03:32 localhost kernel: [ 1924.279637] [<ffffffff81016a15>] do_softirq+0x65/0xa0
    Dec 6 08:03:32 localhost kernel: [ 1924.279639] [<ffffffff810696ce>] irq_exit+0x9e/0xc0
    Dec 6 08:03:32 localhost kernel: [ 1924.279641] [<ffffffff8140d10e>] smp_apic_timer_interrupt+0x6e/0x99
    Dec 6 08:03:32 localhost kernel: [ 1924.279643] [<ffffffff8140afde>] apic_timer_interrupt+0x6e/0x80
    Dec 6 08:03:32 localhost kernel: [ 1924.279644] <EOI> [<ffffffff81279e9b>] ? intel_idle+0xcb/0x120
    Dec 6 08:03:32 localhost kernel: [ 1924.279649] [<ffffffff81279e7d>] ? intel_idle+0xad/0x120
    Dec 6 08:03:32 localhost kernel: [ 1924.279651] [<ffffffff8131d756>] cpuidle_idle_call+0xc6/0x350
    Dec 6 08:03:32 localhost kernel: [ 1924.279654] [<ffffffff81013229>] cpu_idle+0xc9/0x120
    Dec 6 08:03:32 localhost kernel: [ 1924.279657] [<ffffffff813e6912>] rest_init+0x96/0xa4
    Dec 6 08:03:32 localhost kernel: [ 1924.279659] [<ffffffff8194fc15>] start_kernel+0x3bf/0x3cc
    Dec 6 08:03:32 localhost kernel: [ 1924.279662] [<ffffffff8194f347>] x86_64_start_reservations+0x132/0x136
    Dec 6 08:03:32 localhost kernel: [ 1924.279664] [<ffffffff8194f140>] ? early_idt_handlers+0x140/0x140
    Dec 6 08:03:32 localhost kernel: [ 1924.279666] [<ffffffff8194f44d>] x86_64_start_kernel+0x102/0x111
    Dec 6 08:03:32 localhost kernel: [ 1924.279668] ---[ end trace 6f3b132eb24e1d2e ]---
    Dec 6 08:03:32 localhost kernel: [ 1924.279669] wifi0 Tx timed out! Resetting card
    Dec 6 08:03:32 localhost kernel: [ 1924.279694] hostap_pci: wifi0: resetting card
    Dec 6 08:03:34 localhost kernel: [ 1926.278267] wifi0 Tx timed out! Resetting card
    Dec 6 08:03:36 localhost kernel: [ 1928.163754] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:36 localhost kernel: [ 1928.276987] wifi0 Tx timed out! Resetting card
    Dec 6 08:03:38 localhost kernel: [ 1930.162473] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:38 localhost kernel: [ 1930.222552] hostap_pci: wifi0: already resetting card - ignoring reset request
    Dec 6 08:03:38 localhost kernel: [ 1930.262615] hostap_pci: wifi0: already resetting card - ignoring reset request
    Dec 6 08:03:38 localhost kernel: [ 1930.262619] wifi0: Port type setting to 1 failed
    Dec 6 08:03:38 localhost kernel: [ 1930.275703] wifi0 Tx timed out! Resetting card
    Dec 6 08:03:40 localhost kernel: [ 1932.261129] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:40 localhost kernel: [ 1932.261131] wifi0: MAC port 0 enabling failed
    Dec 6 08:03:40 localhost kernel: [ 1932.261150] hostap_pci: wifi0: resetting card
    Dec 6 08:03:43 localhost kernel: [ 1934.463052] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:43 localhost kernel: [ 1934.463064] hostap_pci: wifi0: already resetting card - ignoring reset request
    Dec 6 08:03:45 localhost kernel: [ 1936.461771] wifi0: interrupt delivery does not seem to work
    Dec 6 08:03:45 localhost kernel: [ 1936.501864] hostap_pci: wifi0: already resetting card - ignoring reset request
    Dec 6 08:03:45 localhost kernel: [ 1936.501866] wifi0: Port type setting to 1 failed
    Dec 6 08:03:45 localhost kernel: [ 1936.521925] wifi0: MAC port 0 enabling failed
    Dec 6 08:04:13 localhost kernel: [ 1964.923031] hostap_pci: wlan0: resetting card
    Dec 6 08:04:15 localhost kernel: [ 1967.125469] wlan0: interrupt delivery does not seem to work
    Dec 6 08:04:15 localhost kernel: [ 1967.125474] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:04:17 localhost kernel: [ 1969.124179] wifi0: interrupt delivery does not seem to work
    Dec 6 08:04:17 localhost kernel: [ 1969.164257] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:04:17 localhost kernel: [ 1969.164259] wlan0: Port type setting to 1 failed
    Dec 6 08:04:17 localhost kernel: [ 1969.184273] wlan0: MAC port 0 enabling failed
    Dec 6 08:06:13 localhost kernel: [ 2084.846529] hostap_pci: wlan0: resetting card
    Dec 6 08:06:15 localhost kernel: [ 2087.048638] wlan0: interrupt delivery does not seem to work
    Dec 6 08:06:15 localhost kernel: [ 2087.048649] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:06:17 localhost kernel: [ 2089.047356] wifi0: interrupt delivery does not seem to work
    Dec 6 08:06:17 localhost kernel: [ 2089.087406] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:06:17 localhost kernel: [ 2089.087407] wlan0: Port type setting to 1 failed
    Dec 6 08:06:17 localhost kernel: [ 2089.107404] wlan0: MAC port 0 enabling failed
    Dec 6 08:08:13 localhost kernel: [ 2204.769302] hostap_pci: wlan0: resetting card
    Dec 6 08:08:15 localhost kernel: [ 2206.971827] wlan0: interrupt delivery does not seem to work
    Dec 6 08:08:15 localhost kernel: [ 2206.971832] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:08:17 localhost kernel: [ 2208.970532] wifi0: interrupt delivery does not seem to work
    Dec 6 08:08:17 localhost kernel: [ 2209.010630] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:08:17 localhost kernel: [ 2209.010634] wlan0: Port type setting to 1 failed
    Dec 6 08:08:19 localhost kernel: [ 2211.009274] wlan0: interrupt delivery does not seem to work
    Dec 6 08:08:19 localhost kernel: [ 2211.009275] wlan0: MAC port 0 enabling failed
    Dec 6 08:10:13 localhost kernel: [ 2324.691574] hostap_pci: wlan0: resetting card
    Dec 6 08:10:15 localhost kernel: [ 2326.891711] wlan0: interrupt delivery does not seem to work
    Dec 6 08:10:15 localhost kernel: [ 2326.891716] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:10:17 localhost kernel: [ 2328.890393] wifi0: interrupt delivery does not seem to work
    Dec 6 08:10:17 localhost kernel: [ 2328.930472] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:10:17 localhost kernel: [ 2328.930473] wlan0: Port type setting to 1 failed
    Dec 6 08:10:17 localhost kernel: [ 2328.950482] wlan0: MAC port 0 enabling failed
    Dec 6 08:12:13 localhost kernel: [ 2444.616669] hostap_pci: wlan0: resetting card
    Dec 6 08:12:15 localhost kernel: [ 2446.818212] wlan0: interrupt delivery does not seem to work
    Dec 6 08:12:15 localhost kernel: [ 2446.818218] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:12:17 localhost kernel: [ 2448.816887] wifi0: interrupt delivery does not seem to work
    Dec 6 08:12:17 localhost kernel: [ 2448.856917] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:12:17 localhost kernel: [ 2448.856919] wlan0: Port type setting to 1 failed
    Dec 6 08:12:17 localhost kernel: [ 2448.876938] wlan0: MAC port 0 enabling failed
    Dec 6 08:14:13 localhost kernel: [ 2564.540113] hostap_pci: wlan0: resetting card
    Dec 6 08:14:15 localhost kernel: [ 2566.741388] wlan0: interrupt delivery does not seem to work
    Dec 6 08:14:15 localhost kernel: [ 2566.741394] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:14:17 localhost kernel: [ 2568.740062] wifi0: interrupt delivery does not seem to work
    Dec 6 08:14:17 localhost kernel: [ 2568.780120] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:14:17 localhost kernel: [ 2568.780121] wlan0: Port type setting to 1 failed
    Dec 6 08:14:17 localhost kernel: [ 2568.800135] wlan0: MAC port 0 enabling failed
    Dec 6 08:16:13 localhost kernel: [ 2684.463514] hostap_pci: wlan0: resetting card
    Dec 6 08:16:15 localhost kernel: [ 2686.664525] wlan0: interrupt delivery does not seem to work
    Dec 6 08:16:15 localhost kernel: [ 2686.664530] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:16:17 localhost kernel: [ 2688.663241] wifi0: interrupt delivery does not seem to work
    Dec 6 08:16:17 localhost kernel: [ 2688.703314] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:16:17 localhost kernel: [ 2688.703315] wlan0: Port type setting to 1 failed
    Dec 6 08:16:17 localhost kernel: [ 2688.723340] wlan0: MAC port 0 enabling failed
    Dec 6 08:18:13 localhost kernel: [ 2804.386357] hostap_pci: wlan0: resetting card
    Dec 6 08:18:15 localhost kernel: [ 2806.587699] wlan0: interrupt delivery does not seem to work
    Dec 6 08:18:15 localhost kernel: [ 2806.587704] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:18:17 localhost kernel: [ 2808.586422] wifi0: interrupt delivery does not seem to work
    Dec 6 08:18:17 localhost kernel: [ 2808.626468] hostap_pci: wlan0: already resetting card - ignoring reset request
    Dec 6 08:18:17 localhost kernel: [ 2808.626471] wlan0: Port type setting to 1 failed
    Dec 6 08:18:19 localhost kernel: [ 2810.625118] wlan0: interrupt delivery does not seem to work
    Dec 6 08:18:19 localhost kernel: [ 2810.625121] wlan0: MAC port 0 enabling failed
    please, have anybody idea what is wrong?
    thanks for help / tips ...
    Last edited by jancici (2012-03-21 08:47:06)

    okay, I did blacklist hostap_pci, I did find out that with orinoco_pci module it is more stable
    BUT
    sometimes it hang up with same error message
    Dec 6 23:03:45 localhost kernel: [ 2465.908317] ------------[ cut here ]------------
    Dec 6 23:03:45 localhost kernel: [ 2465.908324] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x257/0x260()
    Dec 6 23:03:45 localhost kernel: [ 2465.908326] Hardware name: System Product Name
    Dec 6 23:03:45 localhost kernel: [ 2465.908328] NETDEV WATCHDOG: eth1 (orinoco_pci): transmit queue 0 timed out
    Dec 6 23:03:45 localhost kernel: [ 2465.908329] Modules linked in: fuse ext2 mbcache snd_hda_codec_hdmi snd_hda_codec_realtek orinoco_pci orinoco r8169 cfg80211 mii
    i915 drm_kms_helper drm snd_hda_intel evdev snd_hda_codec mei(C) i2c_algo_bit rfkill intel_agp psmouse wmi i2c_i801 i2c_core intel_gtt snd_hwdep snd_pcm button proc
    essor video snd_timer snd soundcore snd_page_alloc btrfs zlib_deflate crc32c libcrc32c hid_a4tech usbhid hid sd_mod ahci pata_acpi libahci xhci_hcd pata_via libata e
    hci_hcd scsi_mod usbcore
    Dec 6 23:03:45 localhost kernel: [ 2465.908365] Pid: 0, comm: kworker/0:1 Tainted: G C 3.1.4-1-ARCH #1
    Dec 6 23:03:45 localhost kernel: [ 2465.908366] Call Trace:
    Dec 6 23:03:45 localhost kernel: [ 2465.908368] <IRQ> [<ffffffff81061b9f>] warn_slowpath_common+0x7f/0xc0
    Dec 6 23:03:45 localhost kernel: [ 2465.908375] [<ffffffff81025047>] ? intel_pmu_enable_all+0xa7/0x110
    Dec 6 23:03:45 localhost kernel: [ 2465.908378] [<ffffffff81061c96>] warn_slowpath_fmt+0x46/0x50
    Dec 6 23:03:45 localhost kernel: [ 2465.908381] [<ffffffff810f1743>] ? perf_ctx_unlock+0x23/0x30
    Dec 6 23:03:45 localhost kernel: [ 2465.908383] [<ffffffff81364377>] dev_watchdog+0x257/0x260
    Dec 6 23:03:45 localhost kernel: [ 2465.908386] [<ffffffff81071e61>] run_timer_softirq+0x131/0x440
    Dec 6 23:03:45 localhost kernel: [ 2465.908388] [<ffffffff81364120>] ? qdisc_reset+0x50/0x50
    Dec 6 23:03:45 localhost kernel: [ 2465.908390] [<ffffffff8101c139>] ? read_tsc+0x9/0x20
    Dec 6 23:03:45 localhost kernel: [ 2465.908392] [<ffffffff810691c0>] __do_softirq+0xb0/0x270
    Dec 6 23:03:45 localhost kernel: [ 2465.908395] [<ffffffff81096158>] ? tick_dev_program_event+0x48/0x110
    Dec 6 23:03:45 localhost kernel: [ 2465.908397] [<ffffffff8109623f>] ? tick_program_event+0x1f/0x30
    Dec 6 23:03:45 localhost kernel: [ 2465.908400] [<ffffffff8140c76c>] call_softirq+0x1c/0x30
    Dec 6 23:03:45 localhost kernel: [ 2465.908403] [<ffffffff81016a15>] do_softirq+0x65/0xa0
    Dec 6 23:03:45 localhost kernel: [ 2465.908404] [<ffffffff810696ce>] irq_exit+0x9e/0xc0
    Dec 6 23:03:45 localhost kernel: [ 2465.908407] [<ffffffff8140d10e>] smp_apic_timer_interrupt+0x6e/0x99
    Dec 6 23:03:45 localhost kernel: [ 2465.908409] [<ffffffff8140afde>] apic_timer_interrupt+0x6e/0x80
    Dec 6 23:03:45 localhost kernel: [ 2465.908410] <EOI> [<ffffffff81279e9b>] ? intel_idle+0xcb/0x120
    Dec 6 23:03:45 localhost kernel: [ 2465.908415] [<ffffffff81279e7d>] ? intel_idle+0xad/0x120
    Dec 6 23:03:45 localhost kernel: [ 2465.908417] [<ffffffff8131d756>] cpuidle_idle_call+0xc6/0x350
    Dec 6 23:03:45 localhost kernel: [ 2465.908419] [<ffffffff81013229>] cpu_idle+0xc9/0x120
    Dec 6 23:03:45 localhost kernel: [ 2465.908422] [<ffffffff813f8944>] start_secondary+0x202/0x209
    Dec 6 23:03:45 localhost kernel: [ 2465.908424] ---[ end trace 58cac98ca8b4102b ]---
    Dec 6 23:03:45 localhost kernel: [ 2465.908433] eth1: Tx timeout! ALLOCFID=0128, TXCOMPLFID=03eb, EVSTAT=808b
    maybe I need some more modern card, something with atheros chipset ...

  • No sound and no audio card in device manager

    Hello!
    I have a HP Pavilion dv6710ea and my operating system is 32-bit Windows Vista SP2. Quite some time ago my optical CD/DVD drive stopped working. It simply disappeared from My Computer and the Device Manager. I've tried all the suggested fixes I found on this forum but none of them worked. But I didn't need the drive that much anyway, so after some struggle I just gave up on this issue.
    And now another such thing happened. Suddenly, I lost sound and when I hovered my mouse pointer over the sound icon at the taskbar, a pop-up showed saying "No Audio Output device is installed.". I checked the device manager, and my audio card was gone! Any attempts to detect it failed. I restored the system to the point before the problem occured, but it did not help. I tried to install the new audio drivers, but the installation failed, because the device could not have been found. Now I don't know what else can be done to try to fix this. I certainly hope it is not related with hardware failure of some kind.
    I would greatly appreciate any help on this issue.

    Hi,
    Reset BIOS to defaults
    Restart the PC, as you see initial POST Screen on the Monitor, start pressing F10 to access BIOS< press f5, select Yes, and Press f10 to save and exit.
    Download and install Audio Driver.
    Thank You.
    Kiran Talluri
    Say thanks by clicking the "Kudos! Star" which is on the left.
    Make it easier for other people to find solutions, by marking my answer "Accept as Solution" if it solves your issue

  • [SOLVED] No sound with vmware

    I'm getting no sound with vmware, not sure why
    Here's what I've been trying to test things:
    $ cat /dev/urandom | aplay
    Playing raw data 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
    Here's some alsa info, if it helps:
    $ aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    default:CARD=AudioPCI
    Ensoniq AudioPCI, ES1371 DAC2/ADC
    Default Audio Device
    sysdefault:CARD=AudioPCI
    Ensoniq AudioPCI, ES1371 DAC2/ADC
    Default Audio Device
    front:CARD=AudioPCI,DEV=0
    Ensoniq AudioPCI, ES1371 DAC2/ADC
    Front speakers
    rear:CARD=AudioPCI,DEV=0
    Ensoniq AudioPCI, ES1371 DAC1
    Rear speakers
    surround40:CARD=AudioPCI,DEV=0
    Ensoniq AudioPCI, ES1371 DAC2/ADC
    4.0 Surround output to Front and Rear speakers
    iec958:CARD=AudioPCI,DEV=0
    Ensoniq AudioPCI, ES1371 DAC2/ADC
    IEC958 (S/PDIF) Digital Audio Output
    Last edited by specular (2014-08-27 19:52:45)

    Don't think I was clear enough, but arch is installed as a vmware guest. Below is the requested output from the alsa-info script:
    upload=true&script=true&cardinfo=
    !!ALSA Information Script v 0.4.63
    !!Script ran on: Wed Aug 27 18:29:05 UTC 2014
    !!Linux Distribution
    NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
    !!DMI Information
    Manufacturer: VMware, Inc.
    Product Name: VMware7,1
    Product Version: None
    Firmware Version: VMW71.00V.0.B64.1310020058
    !!Kernel Information
    Kernel release: 3.14.2-1-ARCH
    Operating System: GNU/Linux
    Architecture: x86_64
    Processor: unknown
    SMP Enabled: Yes
    !!ALSA Version
    Driver version: k3.14.2-1-ARCH
    Library version: 1.0.27.2
    Utilities version: 1.0.28
    !!Loaded ALSA modules
    snd_ens1371
    !!Sound Servers on this system
    No sound servers found.
    !!Soundcards recognised by ALSA
    0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI
    Ensoniq AudioPCI ENS1371 at 0x1000, irq 19
    !!PCI Soundcards installed in the system
    02:01.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02)
    !!Advanced information - PCI Vendor/Device/Subsystem ID's
    02:01.0 0401: 1274:1371 (rev 02)
    Subsystem: 1274:1371
    !!Loaded sound module options
    !!Module: snd_ens1371
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    joystick_port : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    lineio : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    spdif : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    !!AC97 Codec information
    --startcollapse--
    0-0/0: Cirrus Logic CS4297A rev 3
    PCI Subsys Vendor: 0x1274
    PCI Subsys Device: 0x1371
    Flags: 4
    Capabilities :
    DAC resolution : 16-bit
    ADC resolution : 16-bit
    3D enhancement : No 3D Stereo Enhancement
    Current setup
    Mic gain : +0dB [+0dB]
    POP path : pre 3D
    Sim. stereo : off
    3D enhancement : off
    Loudness : off
    Mono output : MIX
    Mic select : Mic1
    ADC/DAC loopback : off
    0:00 = 0000
    0:02 = 0e8e
    0:04 = 0000
    0:06 = 0000
    0:08 = 0000
    0:0a = 0000
    0:0c = bfbf
    0:0e = bfbf
    0:10 = bfbf
    0:12 = bfbf
    0:14 = bfbf
    0:16 = bfbf
    0:18 = 28a8
    0:1a = 0000
    0:1c = 0808
    0:1e = 0000
    0:20 = 0000
    0:22 = 0000
    0:24 = 0000
    0:26 = 000f
    0:28 = 0000
    0:2a = 0000
    0:2c = 0000
    0:2e = 0000
    0:30 = 0000
    0:32 = 0000
    0:34 = 0000
    0:36 = 0000
    0:38 = 0000
    0:3a = 0000
    0:3c = 0000
    0:3e = 0000
    0:40 = 0000
    0:42 = 0000
    0:44 = 0000
    0:46 = 0000
    0:48 = 0000
    0:4a = 0000
    0:4c = 0000
    0:4e = 0000
    0:50 = 0000
    0:52 = 0000
    0:54 = 0000
    0:56 = 0000
    0:58 = 0000
    0:5a = 0000
    0:5c = 0000
    0:5e = 0000
    0:60 = 0000
    0:62 = 0000
    0:64 = 0000
    0:66 = 0000
    0:68 = 0000
    0:6a = 0000
    0:6c = 0000
    0:6e = 0000
    0:70 = 0000
    0:72 = 0000
    0:74 = 0000
    0:76 = 0000
    0:78 = 0000
    0:7a = 0000
    0:7c = 4352
    0:7e = 5913
    --endcollapse--
    !!ALSA Device nodes
    crw-rw----+ 1 root audio 116, 6 Aug 28 01:35 /dev/snd/controlC0
    crw-rw----+ 1 root audio 116, 2 Aug 28 01:35 /dev/snd/midiC0D0
    crw-rw----+ 1 root audio 116, 5 Aug 28 01:35 /dev/snd/pcmC0D0c
    crw-rw----+ 1 root audio 116, 4 Aug 28 03:28 /dev/snd/pcmC0D0p
    crw-rw----+ 1 root audio 116, 3 Aug 28 01:35 /dev/snd/pcmC0D1p
    crw-rw----+ 1 root audio 116, 1 Aug 28 01:35 /dev/snd/seq
    crw-rw----+ 1 root audio 116, 33 Aug 28 01:35 /dev/snd/timer
    /dev/snd/by-path:
    total 0
    drwxr-xr-x 2 root root 60 Aug 28 01:35 .
    drwxr-xr-x 3 root root 200 Aug 28 01:35 ..
    lrwxrwxrwx 1 root root 12 Aug 28 01:35 pci-0000:02:01.0 -> ../controlC0
    !!Aplay/Arecord output
    APLAY
    **** List of PLAYBACK Hardware Devices ****
    card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: AudioPCI [Ensoniq AudioPCI], device 1: ES1371/2 [ES1371 DAC1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    ARECORD
    **** List of CAPTURE Hardware Devices ****
    card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    !!Amixer output
    !!-------Mixer controls for card 0 [AudioPCI]
    Card hw:0 'AudioPCI'/'Ensoniq AudioPCI ENS1371 at 0x1000, irq 19'
    Mixer name : 'Cirrus Logic CS4297A rev 3'
    Components : 'AC97a:43525913'
    Controls : 26
    Simple ctrls : 13
    Simple mixer control 'Master',0
    Capabilities: pvolume pswitch pswitch-joined
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Mono:
    Front Left: Playback 49 [78%] [-21.00dB] [on]
    Front Right: Playback 49 [78%] [-21.00dB] [on]
    Simple mixer control 'PCM',0
    Capabilities: pvolume pswitch pswitch-joined
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Mono:
    Front Left: Playback 23 [37%] [0.00dB] [on]
    Front Right: Playback 23 [37%] [0.00dB] [on]
    Simple mixer control 'Line',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Simple mixer control 'CD',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Simple mixer control 'Mic',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [on]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [on]
    Simple mixer control 'Mic Boost (+20dB)',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'Video',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Simple mixer control 'Phone',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'Aux',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch cswitch-joined
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 15
    Front Left: Capture 8 [53%] [12.00dB] [on]
    Front Right: Capture 8 [53%] [12.00dB] [on]
    Simple mixer control 'Mix',0
    Capabilities: cswitch cswitch-exclusive
    Capture exclusive group: 0
    Capture channels: Front Left - Front Right
    Front Left: Capture [off]
    Front Right: Capture [off]
    Simple mixer control 'Mix Mono',0
    Capabilities: cswitch cswitch-exclusive
    Capture exclusive group: 0
    Capture channels: Front Left - Front Right
    Front Left: Capture [off]
    Front Right: Capture [off]
    !!Alsactl output
    --startcollapse--
    state.AudioPCI {
    control.1 {
    iface MIXER
    name 'Master Playback Switch'
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.2 {
    iface MIXER
    name 'Master Playback Volume'
    value.0 49
    value.1 49
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -9450
    dbmax 0
    dbvalue.0 -2100
    dbvalue.1 -2100
    control.3 {
    iface MIXER
    name 'Phone Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.4 {
    iface MIXER
    name 'Phone Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.5 {
    iface MIXER
    name 'Mic Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.6 {
    iface MIXER
    name 'Mic Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.7 {
    iface MIXER
    name 'Mic Boost (+20dB)'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.8 {
    iface MIXER
    name 'Line Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.9 {
    iface MIXER
    name 'Line Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.10 {
    iface MIXER
    name 'CD Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.11 {
    iface MIXER
    name 'CD Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.12 {
    iface MIXER
    name 'Video Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.13 {
    iface MIXER
    name 'Video Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.14 {
    iface MIXER
    name 'Aux Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.15 {
    iface MIXER
    name 'Aux Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.16 {
    iface MIXER
    name 'PCM Playback Switch'
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.17 {
    iface MIXER
    name 'PCM Playback Volume'
    value.0 23
    value.1 23
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 0
    dbvalue.1 0
    control.18 {
    iface MIXER
    name 'Capture Source'
    value.0 Mic
    value.1 Mic
    comment {
    access 'read write'
    type ENUMERATED
    count 2
    item.0 Mic
    item.1 CD
    item.2 Video
    item.3 Aux
    item.4 Line
    item.5 Mix
    item.6 'Mix Mono'
    item.7 Phone
    control.19 {
    iface MIXER
    name 'Capture Switch'
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.20 {
    iface MIXER
    name 'Capture Volume'
    value.0 8
    value.1 8
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 15'
    dbmin 0
    dbmax 2250
    dbvalue.0 1200
    dbvalue.1 1200
    control.21 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    value '0fff000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.22 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    value cf00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    comment {
    access read
    type IEC958
    count 1
    control.23 {
    iface MIXER
    name 'IEC958 Playback Default'
    value '0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.24 {
    iface MIXER
    name 'IEC958 Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.25 {
    iface PCM
    name 'Playback Channel Map'
    value.0 0
    value.1 0
    comment {
    access read
    type INTEGER
    count 2
    range '0 - 36'
    control.26 {
    iface PCM
    device 1
    name 'Playback Channel Map'
    value.0 0
    value.1 0
    comment {
    access read
    type INTEGER
    count 2
    range '0 - 36'
    --endcollapse--
    !!All Loaded Modules
    Module
    fuse
    vmw_vsock_vmci_transport
    vsock
    nls_iso8859_1
    nls_cp437
    vfat
    fat
    coretemp
    hwmon
    joydev
    snd_ens1371
    mousedev
    snd_ac97_codec
    hid_generic
    ac97_bus
    gameport
    snd_rawmidi
    snd_seq_device
    snd_pcm
    snd_timer
    snd
    crct10dif_pclmul
    crc32_pclmul
    crc32c_intel
    ghash_clmulni_intel
    soundcore
    usbhid
    aesni_intel
    aes_x86_64
    lrw
    gf128mul
    glue_helper
    hid
    psmouse
    vmwgfx
    ppdev
    ablk_helper
    cryptd
    evdev
    vmxnet3
    mac_hid
    pcspkr
    vmw_balloon
    i2c_piix4
    serio_raw
    ttm
    microcode
    drm
    processor
    i2c_core
    intel_agp
    intel_gtt
    vmw_vmci
    parport_pc
    parport
    battery
    shpchp
    ac
    button
    ext4
    crc16
    mbcache
    jbd2
    dm_mod
    sd_mod
    crc_t10dif
    crct10dif_common
    sr_mod
    cdrom
    ata_generic
    pata_acpi
    atkbd
    libps2
    ata_piix
    libata
    mptsas
    scsi_transport_sas
    mptscsih
    uhci_hcd
    ehci_pci
    scsi_mod
    ehci_hcd
    usbcore
    mptbase
    usb_common
    floppy
    i8042
    serio
    !!ALSA/HDA dmesg
    [ 5.342713] mousedev: PS/2 mouse device common for all mice
    [ 5.345140] snd_ens1371 0000:02:01.0: enabling device (0000 -> 0001)
    [ 5.391722] intel_rapl: domain package energy ctr 0:0 not working, skip
    Last edited by specular (2014-08-27 18:45:55)

  • On my imac27" with firewire audio card i have drop out and crackle when i push on airport.

    Why???
    audio cards:
    Tc elctronic Impact twin
    Motu Ultra lite
    this audio cards working perfectly and update

    Have you tried to update or uninstall/reinstall the SDCard reader drivers? I've read that the uninstall/reinstall step will sometimes work on some problem devices.
    You have run the AppleSoftwareUpdate while in Windows and the Mac side right? Sorry, had to ask.
    Have you done a search on the 'net or Microsoft for the error (code 10)?
    You can try to reload the BootCamp drivers again manually and see if that will work, but it may mess with your sound again. (or get it to work the first time?)

  • KDE4 compositing no longer works with Intel graphics card

    I recently upgraded to the new intel graphics card drivers and when I started KDE4, I got a black screen. I disabled compositing through the kwinrc file, but I want it back! Here's my xorg.conf
    Section "ServerLayout"
            Identifier     "Xorg Configured"
            Screen      0  "Screen0" 0 0
            InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    Section "ServerFlags"
            Option "AllowMouseOpenFail"  "true"
            Option "AIGLX" "true"
    EndSection
    Section "Module"
            Load  "ddc"  # ddc probing of monitor
            Load  "dbe"
            Load  "dri"
            Load  "extmod"
            Load  "glx"
            Load  "bitmap" # bitmap-fonts
            Load  "freetype"
            Load  "record"
    #       Load  "synaptics"
    EndSection
    Section "InputDevice"
            Identifier  "Keyboard0"
            Driver      "keyboard"
            Option      "CoreKeyboard"
            Option "XkbRules" "xorg"
            Option "XkbModel" "pc105"
            Option "XkbLayout" "gb"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
            Identifier "Monitor0"
            Option "DPMS" "true"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
            Identifier  "Card0"
            Driver      "intel"
    #       Driver      "vesa"
            VendorName  "All"
            BoardName   "All"
            Option      "XAANoOffscreenPixmaps" "true"
            Option      "DRI" "true"
    EndSection
    Section "Screen"
            Identifier "Screen0"
            Device     "Card0"
            Monitor    "Monitor0"
            DefaultColorDepth 24
            SubSection "Display"
                    Depth     24
                    Modes "1280x800" "1024x768" "800x600" "640x480"
            EndSubSection
    EndSection
    Section "DRI"
            Mode 0666
    EndSection
    Section "Extensions"
            Option "Composite" "Enable"
    EndSection
    and my Xorg.0.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.4.0.90
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-ARCH x86_64
    Current Operating System: Linux michael-laptop 2.6.24-ARCH #1 SMP PREEMPT Sun Feb 10 15:44:59 CET 2008 x86_64
    Build Date: 26 January 2008 09:52:13AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 12 11:23:12 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AIGLX" "true"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) No FontPath specified. Using compiled-in default.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (==) |-->Input Device "<default pointer>"
    (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x7b0560
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (++) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,2a00 card 14c0,0026 rev 0c class 06,00,00 hdr 00
    (II) PCI: 00:02:0: chip 8086,2a02 card 14c0,0026 rev 0c class 03,00,00 hdr 80
    (II) PCI: 00:02:1: chip 8086,2a03 card 14c0,0026 rev 0c class 03,80,00 hdr 80
    (II) PCI: 00:1a:0: chip 8086,2834 card 14c0,0026 rev 03 class 0c,03,00 hdr 80
    (II) PCI: 00:1a:1: chip 8086,2835 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1a:7: chip 8086,283a card 14c0,0026 rev 03 class 0c,03,20 hdr 00
    (II) PCI: 00:1b:0: chip 8086,284b card 14c0,0026 rev 03 class 04,03,00 hdr 00
    (II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:2: chip 8086,2843 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:3: chip 8086,2845 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:5: chip 8086,2849 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1d:0: chip 8086,2830 card 14c0,0026 rev 03 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,2831 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,2832 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,2836 card 14c0,0026 rev 03 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
    (II) PCI: 00:1f:0: chip 8086,2815 card 0000,0000 rev 03 class 06,01,00 hdr 80
    (II) PCI: 00:1f:1: chip 8086,2850 card 14c0,0026 rev 03 class 01,01,8a hdr 00
    (II) PCI: 00:1f:2: chip 8086,2829 card 14c0,0026 rev 03 class 01,06,01 hdr 00
    (II) PCI: 00:1f:3: chip 8086,283e card 14c0,0026 rev 03 class 0c,05,00 hdr 00
    (II) PCI: 04:00:0: chip 14e4,1713 card 14c0,0026 rev 02 class 02,00,00 hdr 00
    (II) PCI: 0c:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
    (II) PCI: 0e:06:0: chip 1180,0832 card 14c0,0026 rev 05 class 0c,00,10 hdr 80
    (II) PCI: 0e:06:1: chip 1180,0822 card 14c0,0026 rev 22 class 08,05,00 hdr 80
    (II) PCI: 0e:06:2: chip 1180,0592 card 14c0,0026 rev 12 class 08,80,00 hdr 80
    (II) PCI: End of PCI scan
    (II) Intel Bridge workaround enabled
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,14), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
    [1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
    [2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
    [3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xc0000000 - 0xc3ffffff (0x4000000) MX[b]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0xcc000000 - 0xcdffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 4: bridge is at (0:28:1), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 4 I/O range:
    [0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
    [1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
    [2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
    [3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
    (II) Bus 4 non-prefetchable memory range:
    [0] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[b]
    (II) Bus 4 prefetchable memory range:
    [0] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 6: bridge is at (0:28:2), (0,6,6), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 6 I/O range:
    [0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
    [1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
    [2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
    [3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
    (II) Bus 6 non-prefetchable memory range:
    [0] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[b]
    (II) Bus 6 prefetchable memory range:
    [0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 8: bridge is at (0:28:3), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 8 I/O range:
    [0] -1 0 0x00005000 - 0x000050ff (0x100) IX[b]
    [1] -1 0 0x00005400 - 0x000054ff (0x100) IX[b]
    [2] -1 0 0x00005800 - 0x000058ff (0x100) IX[b]
    [3] -1 0 0x00005c00 - 0x00005cff (0x100) IX[b]
    (II) Bus 8 non-prefetchable memory range:
    [0] -1 0 0xb8000000 - 0xbbffffff (0x4000000) MX[b]
    (II) Bus 8 prefetchable memory range:
    [0] -1 0 0xc8000000 - 0xc9ffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 10: bridge is at (0:28:4), (0,10,10), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 12: bridge is at (0:28:5), (0,12,12), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 12 non-prefetchable memory range:
    [0] -1 0 0xf8200000 - 0xf82fffff (0x100000) MX[b]
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 14: bridge is at (0:30:0), (0,14,14), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 14 non-prefetchable memory range:
    [0] -1 0 0xf8300000 - 0xf83fffff (0x100000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8000000/20, 0xd0000000/28, I/O @ 0x1800/3
    (--) PCI: (0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8100000/20
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [1] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [2] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [3] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [4] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [5] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [6] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [7] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [8] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [9] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [10] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [12] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [13] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [14] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [15] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [16] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [17] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [18] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [19] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [1] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [2] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [3] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [4] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [5] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [6] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [7] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [8] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [9] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [10] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [12] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [13] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [14] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [15] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [16] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [17] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [18] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [19] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [20] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [21] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [22] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [23] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [24] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [30] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [31] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [32] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [33] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [34] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [35] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specifiedin the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified inthe config file.
    (II) "glx" will be loaded. This was enabled by default and also specified inthe config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specifiedin the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified inthe config file.
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (**) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.0.90, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 2.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33
    (II) Primary Device is: PCI 00:02:0
    (--) Assigning device section with no busID to primary device
    (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
    (--) Chipset 965GM found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [20] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [21] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [22] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [23] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [24] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [30] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [31] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [32] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [33] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [34] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [35] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [22] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [23] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [24] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [25] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [26] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [27] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [28] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [33] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [34] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [35] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [36] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [37] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [38] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 0.1.0
    ABI class: X.Org Video Driver, version 2.0
    (**) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "DRI" "true"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    (--) intel(0): Chipset: "965GM"
    (--) intel(0): Linear framebuffer at 0xD0000000
    (--) intel(0): IO registers at addr 0xF8000000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"(II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7616 kB
    (II) intel(0): VESA VBE OEM: Intel(r)Crestline Graphics Chip Accelerated VGABIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)Crestline Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 512 kB GTT.
    (II) intel(0): detected 7676 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing on
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MS[b]
    [1] 0 0 0xf8000000 - 0xf80fffff (0x100000) MS[b]
    [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [7] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [8] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [9] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [10] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [11] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [12] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [13] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [14] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [15] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [16] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [17] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [18] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [22] 0 0 0x00001800 - 0x00001807 (0x8) IS[b]
    [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [25] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [26] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [27] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [28] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [29] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [30] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [31] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [34] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [35] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [36] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [37] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [38] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [39] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [40] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [41] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    [42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [43] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 238592 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 954364 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: drmOpenMinor returns 7
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (==) intel(0): VideoRam: 262144 KB
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Success.
    (II) intel(0): [drm] Registers = 0xf8000000
    (II) intel(0): [drm] ring buffer = 0xd0000000
    (II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0xd0100000
    (II) intel(0): [drm] mapped back buffer at 0xd1a00000, handle = 0xd1a00000
    (II) intel(0): [drm] mapped depth buffer at 0xd2040000, handle = 0xd2040000
    (II) intel(0): [drm] mapped classic textures at 0xd2680000, handle = 0xd2680000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (==) intel(0): Write-combining range (0xd0000000,0x10000000)
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 19660800 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x0077f000: end of stolen memory
    (II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
    (II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
    (II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (**) Option "dpms" "true"
    (**) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: Enabled
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 331 x 207
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "gb"
    (**) Keyboard0: XkbLayout: "gb"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (WW) <default pointer>: No Device specified, looking for one...
    (II) <default pointer>: Setting Device option to "/dev/input/mice"
    (--) <default pointer>: Device: "/dev/input/mice"
    (==) <default pointer>: Protocol: "Auto"
    (**) Option "CorePointer"
    (**) <default pointer>: always reports core events
    (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
    (**) <default pointer>: ZAxisMapping: buttons 4 and 5
    (**) <default pointer>: Buttons: 9
    (**) <default pointer>: Sensitivity: 1
    (II) evaluating device (<default pointer>)
    (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
    (II) <default pointer>: ps2EnableDataReporting: succeeded
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1304 1336 1408 800 801804 813 -hsync -vsync (48.9 kHz)
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) 3rd Button detected: disabling emulate3Button
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (II) intel(0): xf86UnbindGARTMemory: unbind key 2
    (II) intel(0): xf86UnbindGARTMemory: unbind key 3
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x0077f000: end of stolen memory
    (II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
    (II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
    (II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0x2fff9000
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) <default pointer>: ps2EnableDataReporting: succeeded
    (II) 3rd Button detected: disabling emulate3Button
    Last edited by miggols99 (2008-02-12 14:50:38)

    Maybe it is this bug: http://bugs.kde.org/show_bug.cgi?id=154969
    The decisive effect is 'Improved window management' - if this effect is enabled kwin works normally.
    Last edited by May-C (2008-02-13 01:16:48)

  • Using JMF with two audio cards

    Hello,
    Is it possible to use two audio cards and have JMF address them independently. I'd like to be able to reference one for recording audio and the other for audio playback (simultaneously).
    Thanks,
    Ben

    It's definately possible, but you may have to interface with JavaSound to do it.
    Theoretically, you should just be able to do javasound://0 for one, and javasound://1 for the other. No guarentees, though. You might have to wrap around JavaSound directly to get that level of control.

  • No sound with Intel HD audio [solved]

    Hi,
    I recently set up my laptop with archlinux, and I'm getting no sound. I have the drivers for my chip installed, there is nothing unusual in dmesg, and alsamixer detects the card fine, but even after I unmute the card, I get nothing. when I start up kde, I get this message:
    Sound server informational message:
    Error while initializing the sound driver:
    device /dev/dsp can't be opened (No such file or directory)
    The sound server will continue, using the null output device.
    It may be as simple as making /dev/dsp a symbolic link to the correct device, but I'm not sure which device that would be.
    alsamixer tells me:
    Card: HDA Intel
    Chip:SigmaTel STAC9221 A1
    Thanks in advance.
    Last edited by Zerathidune (2007-03-10 03:35:45)

    do you belong to the audio group?
    as root
    "gpasswd -a USER audio"
    as user at konsole type
    "alsamixer"
    anything come up ?
    awhile back i had an issue with line jack sense i forget weather on/off

  • [SOLVED] HDMI Audio In VLC Garbled/Inaudible WIth Intel Audio

    I thought I understood the difference between cards, devices, and pcm devices, but I guess I don't.
    I've set up my system to recognize the Analog Card as the default (card 0), and the HDMI Card as Card 1 via Set The Default Sound Card .  My alsa-base.conf:
    options snd-hda-intel model=auto
    options snd slots=snd_hda_intel
    options snd_hda_intel index=1
    Output of aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 2: VT1802 Alt Analog [VT1802 Alt Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    Output of aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    sysdefault:CARD=PCH
    HDA Intel PCH, VT1802 Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, VT1802 Analog
    Front speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, VT1802 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, VT1802 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, VT1802 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, VT1802 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, VT1802 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=HDMI,DEV=0
    HDA Intel HDMI, HDMI 0
    HDMI Audio Output
    hdmi:CARD=HDMI,DEV=1
    HDA Intel HDMI, HDMI 1
    HDMI Audio Output
    hdmi:CARD=HDMI,DEV=2
    HDA Intel HDMI, HDMI 2
    HDMI Audio Output
    And my latest .aroundrc
    pcm.!default {
    type hw
    card PCH
    ctl.!default {
    type hw
    card PCH
    pcm.!hdmi0 {
    type plughw
    card HDMI
    device 3
    pcm.!hdmi1 {
    type plughw
    card HDMI
    device 7
    pcm.!hdmi2 {
    type plughw
    card HDMI
    device 8
    WIth the above configuration, VLC outputs to PC speakers fine using the "Analog Default Audio Device" (However, if it matters, switching to "Analog Front Speakers" is a garbled mess).  Selecting HDMI0 and HDMI2 in VLC produces no output.  Selecting HDMI1 in VLC is the same garbled mess.  However, running this command from Archwiki HDMI Output produces totally clear audio via HDMI:
    aplay -D plughw:1,7 /usr/share/sounds/alsa/Front_Center.wav
    The list of audio devices that VLC "sees" as selectable for audio output mirrors the PCM devices I see with aplay -L.  The three HDMI audio devices in aplay -L each list as their devices 0, 1, and 2 for HDMI0, HDMI1, and HDMI2 respectively.  Conceptually, it seems to me like my HDMI PCM devices are messed up.  Shouldn't HDMI1, at least, be paired with Device 7, since the command directly above works with device 7?  If I understand things correctly, my asoundrc currently overrides cards , however, when I try to get it to override pcm devices, with the following, no hdmi devices are visible in VLC:
    pcm.!hdmi {
    type plughw
    card HDMI
    device 7
    There must be something I am not understanding - would appreciate any help or insights.
    Last edited by strexfive (2014-03-23 09:20:17)

    Okay nevermind...sort of.  It occurred to me to try the same alsa wav test file in VLC through HDMI.  It plays clearly with HDMI1 device.  So, my understanding of ALSA PCM devices is still totally messed up, but I have discovered my problem is a different one:
    VLC plays mp3/mp4/mkv files garbled through HDMI, but clearly through PC Speakers.
    Now I will try and solve this new problem myself.  Marking SOLVED since original issue was non-issue...can I delete thread so as not to waste everyone's time?

  • [Solved] No sound with ALSA (change default sound card)

    I installed Arch on another laptop and I am unable to get sound working.
    # lspci | grep -i audio
    00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 9840
    00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)
    Two devices show up in alsamixer. The first (the default, I assume) shows up only an S/PDIF button that I can toggle. If I select the other sound card, I can change volume normally.
    I followed this solution in the wiki with no success.
    How can I make the second sound card the default one?
    Last edited by Gradient (2014-09-09 18:17:14)

    Here is the requested info with the cards in the corrected order:
    $ aplay -lL;
    null
    Discard all samples (playback) or generate zero samples (capture)
    default:CARD=Generic_1
    HD-Audio Generic, ALC3227 Analog
    Default Audio Device
    sysdefault:CARD=Generic_1
    HD-Audio Generic, ALC3227 Analog
    Default Audio Device
    front:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    Front speakers
    surround21:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    2.1 Surround output to Front and Subwoofer speakers
    surround40:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=Generic,DEV=0
    HD-Audio Generic, HDMI 0
    HDMI Audio Output
    **** List of PLAYBACK Hardware Devices ****
    card 0: Generic_1 [HD-Audio Generic], device 0: ALC3227 Analog [ALC3227 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    $ for i in /proc/asound/card[0-9]*; do echo "--- $i ---";amixer -c $(cat $i/id); done;
    --- /proc/asound/card0 ---
    Simple mixer control 'Master',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined
    Playback channels: Mono
    Limits: Playback 0 - 87
    Mono: Playback 87 [100%] [0.00dB] [on]
    Simple mixer control 'Headphone',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 87
    Mono:
    Front Left: Playback 87 [100%] [0.00dB] [on]
    Front Right: Playback 87 [100%] [0.00dB] [on]
    Simple mixer control 'Speaker',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 87
    Mono:
    Front Left: Playback 87 [100%] [0.00dB] [on]
    Front Right: Playback 87 [100%] [0.00dB] [on]
    Simple mixer control 'Mic',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 31 [100%] [12.00dB] [off]
    Front Right: Playback 31 [100%] [12.00dB] [off]
    Simple mixer control 'Mic Boost',0
    Capabilities: volume
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 3 [100%] [36.00dB]
    Front Right: 3 [100%] [36.00dB]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 63
    Front Left: Capture 39 [62%] [12.00dB] [on]
    Front Right: Capture 39 [62%] [12.00dB] [on]
    Simple mixer control 'Auto-Mute Mode',0
    Capabilities: enum
    Items: 'Disabled' 'Enabled'
    Item0: 'Enabled'
    Simple mixer control 'Internal Mic Boost',0
    Capabilities: volume
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 3 [100%] [36.00dB]
    Front Right: 3 [100%] [36.00dB]
    Simple mixer control 'Mute-LED Mode',0
    Capabilities: enum
    Items: 'On' 'Off' 'Follow Master'
    Item0: 'Follow Master'
    --- /proc/asound/card1 ---
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    $ lspci -vnn | grep -A 1 -i audio
    00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:9840]
    Subsystem: Hewlett-Packard Company Device [103c:22cd]
    00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller [1022:780d] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:22cd]
    emeres wrote:What do you mean 'is visible in alsamixer'? F6 does not list it? Did you use index or enable?
    Yes, that is what I meant; F6 did not list them both when I use your options. I must have done something wrong the first time, because now it does.
    emeres wrote:Read this alsa documentation and 'mad modprobe'.
    Thanks for the link. That was what I was looking for.

  • [Solved] No sound with a nVidia MCP51 High Definition Audio

    Hello,
    The sound doesn't work with my nVidia Corporation MCP51 High Definition Audio sound card. I've installed the packages alsa-utils and alsa-oss.
    $ lspci | grep Audio
    00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
    $ aplay -l
    **** Liste des Périphériques Matériels PLAYBACK ****
    carte 0: NVidia [HDA NVidia], périphérique 0: ALC883 Analog [ALC883 Analog]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    carte 0: NVidia [HDA NVidia], périphérique 1: ALC883 Digital [ALC883 Digital]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    If I try alsaconf:
    No supported PnP or PCI card found.
    The sound works natively with Ubuntu. I use Archlinux 64 bits.
    Thanks in advance
    Last edited by Marin M. (2011-11-12 18:33:04)

    Are you using the nouveau (open source nvidia) driver? If yes, it seems that HDMI is not yet implemented: http://nouveau.freedesktop.org/wiki/FeatureMatrix

Maybe you are looking for