[SOLVED] Is this a bug or just me ?
Chromium freezes when I type something on the adress bar.
[6884:6898:0124/014216:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.freedesktop.NetworkManager': no such name
[6884:6898:0124/014216:ERROR:object_proxy.cc(513)] Failed to call method: org.freedesktop.DBus.Properties.Get: object_path= /org/freedesktop/NetworkManager: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
[6884:6906:0124/014216:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
[6884:6906:0124/014216:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
[6884:6884:0124/014216:ERROR:object_proxy.cc(513)] Failed to call method: org.chromium.Mtpd.EnumerateStorage: object_path= /org/chromium/Mtpd: org.freedesktop.DBus.Error.ServiceUnknown: The name org.chromium.Mtpd was not provided by any .service files
Is anyone facing the same issue ?
L.E Installing dbus solved the issue.
Last edited by xfce (2013-01-23 23:58:57)
I would still consider this a bug -- if the CAS doesn't like it then it can reject the formula like it does elsewhere in the calculator eg...
in Home (13)(3) is entered and when the enter key is pressed it becomes: (13)*(3) 39
in CAS (13)(3) is entered, enter key pressed it becomes: 39 39
in Home (13)(3)^2 is entered, enter key pressed it becomes: (13)*(3)^2 117
in CAS (13)(3)^2 is entered, enter key pressed it becomes: 39^2 1521
true
Home sees MN as M*N ; whereas
CAS sees mn as one variable mn ; whereas
Solver sees MN as M*N but
Solver sees M(N) as a Syntax error which needs to be corrected, but
Solver sees (M)(N) as (M)*(N) pretty much the same as in Home....
just seems like unneccessare confusion setting students up for failure,
but thanks for your help and insight
Similar Messages
-
Is this a bug or just a major inconvenience?
Hello. first off let me say that this is my first iPhone, the 3G. LOVE IT!!
Here is my situation... I work in a laboratory where NO wireless devices are allowed. So, what I do is leave my phone in the car and use the 3G's call forward option in settings/phone. The problem is that the iphone will not save the forwarding phone # and I have to input it twice every day (upon arriving to work in morning and returning from lunch break)
Is there a work around? It would be nice to just press the call forwarding button to "ON" and thats it!
thanks in advance.What happens during your lunch break, that is does a incoming call go to your IPhone 3G or is it still forwarded? Enabling it is the only option I know of for call forwarding but you must be in a area where the IPhone 3G can receive calls (have a good signal) when you enable it. So, I wonder what happens if you are driving through somewhere that there is no signal and if this causes the IPhone 3G's call forwarding to turn off?
The Omega -
Is this a bug or just my issue?
when synchronising images the white balance frequently does not sync whereas everything else does. If I do it again with white balance the only ticked box it still doesn't change the other images to be the same. HOWEVER!...sometimes it does...
The issue appears when the update process creates the index cndx_BusinessDataLocalizedLabel. This is a known cause which is under investigation internally. Currently it seems to plan to release in CRM 2015 SP1
-
on syncing photos to my iphone from my mac (snow leopard) (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version on iphn?
Thanks for your reply
I solved my problem,
Definitely a bug in syncing through itunes.
- Connect Iphone with MacBook Pro through USB
- Go to iphone on itunes, photos, deselect photo synchronization.
- Sync (all pics will be removed from iphone)
- Close itunes, iphoto, disconnect iphone
- Select in finder: (home)-pictures-iphoto library.
- Sec click on iphoto library and choose "show package contents"
- Delete iPod Photo Cache
- Close finder
- Empty trash
- Reconnect iphone
- Allow photo synchronization again and everything works smooth.
After this, changes made in iphoto are instantaneously reflected in iphone photos.
Once every hundred photos, one gets detached from iphoto and then changes are no longer reflected (buggy) :-(
In this case I erase the photo in iphoto, sync, go back to iphoto trash, reestablish the photo from the trash and sync again.
Hope this improves. Still have to try cloud though.
Thanks
RC -
In iOS 7 you can still make calls from the locked screen. Just swipe the missed call numbers to the right. Is this a bug?
How is it a security breach? You're free to turn off lock screen notifications for the phone app so that no one can do that.... even if they can, they can only call the number that called you... nothing else. (well, except for 900 or whatever the emergency services number is where you are, but that's required by law).
-
Is this bug or just me? HELP PLEASE!!!!!!!!!
hi all, i have 3 very simple class it just calling a method from Layout class. they are all from different package. class path are fine because i can create Layout but i cant call it methods from package ROSServer with package ROSGui.sharedGui it is fine. i dont kno what kinda error or bug this is
have never come across one even a simple class like this :(
this is kinda urgen, please help me!!!!!!!!!
thanks in advance <3
this class can compile just fine no problem
package Domain;
import java.util.*;
* This Class Create a Layout Object
public class Layout{
/** Create an empty Layout */
public Layout(){
public String getName(){return name;}
public String name;
this class can compile just fine no problem
package ROSGui.sharedGui;
import Domain.*;
public class SharedToolBar{
public SharedToolBar(Layout l){
Layout layout = l;
layout.getName();
// Variables declaration
// End of variables declaration
this class can not compile error "cannot resolve symbol"
package ROSServer;
import Domain.*;
* This Class contains all SQL methods required to modify database and getting Connection
* from DBConnect
final class ServerHandler{
ServerHandler(Layout l){
Layout layout = l;
layout.getName();
// Variables declaration
// End of variables declaration
}It's an easy problem:
Do yourself a favor and post the actual error next time. Or, better yet, read the error yourself, think about what it's telling you, BELIEVE WHAT IT SAYS, and act on it. There's no reason why anybody should be posting compilation errors to a forum.
You can only have one package statement in a .java source file, and it's got to be the first statement in the file.
Put each class in its own file and make them all public. Recompile. When I did that, they all compiled just fine. -
Why is the message app popping up on my mac when everything has been disabled on my iphone and mac as per the instructions all over this forum, I use my phone for messages, not my mac. Is this a bug? I just want it off my mac forever!
Have disabled in Messages > preferences on the Mac
imessage is disabled on my iphone
Same goes for Safari which pops up on the mac when I open it on my iphone, how can I disable it all?Thanks but have signed out, disabled and nothing.
It's Yosemite not Mavericks.
What it won't let me do is delete the account as the - button is greyed
out.
It won't let me delete the app from the OS
On Monday, February 2, 2015, Apple Support Communities Updates < -
I bought LR 5 Oct 16 this year. Why doesn't my watermark work when I export photos? I followed tutorials and still it does not work. Once, a few photos out of about 100 exported with the watermark, but only once. Is this a bug? how to fix? Also, how to I get rid of unwanted presents?
Are you exporting as JPG or TIFF or PSD?
Any other format (including "Original") will not show a watermark. -
Is this a bug for 10.3.9 installation
Hi everyone especially mac experts
This is my first visit to this forum. I have been using my Powerbook g4 12 inch for 3 - 4 years, never had any problem til now!!
My mac has problem all the sudden, got hacked or something, I dont know, I cannot even restart, it hung since apple logo appear, only way is insert install disc + press C with only one option it allowed me to do "erase and install" no backup no upgrade!!!!
Anyway, that is not my question, it just a whining, my question is when i tried to reinstall with my installation CD that came with my powerbook and/or panther CD with 3 blacks and 1 codeX, which I got it when I was a member of developer connect. The series of problem are as follow
1. during installation of CD2, i got installation failure with error messages said some packages cannot install!!!
2. after i ignore (1), by click "quit" which is only one option anyway, os started to ask me to fill in all information include setting user name and password for admin account. so i did. Then I start to do "software update", and it failed to update/install QuickTime 7.x.x. Then i tried to download only, unpackage and install myself, it has the same results
3. From (2) i search solution on mac website by using winXP, and found that i have to remove some packages in /Library/../receipts/ and reinsert CD 2 again to reinstall, cool.. i will give it a shot. Unfortunately, it asked for admin password and i could not give a correct password, but i remember and have it written down on a paper. Then i check at Preference->account->admin and see it shows 7 digits or * instead of 9 digits. I wonder that someone might hacked into my computer and change it.
Therefore, I decide to reinstall again, this time, i spent more time by include erase disk with option "write zero to disk" and no network connection to make sure there is no trace from hacker! Unfortunately, I got the same problem from (1) to (3) without update software d/l. therefore, i believe (3)is a bug it is obvious from my observation, if i cannot solve (3) i will not be able to solve (1) and (2), and i will not have my mac back to work
Please give me advice, i already lost all my data and spent my weekend trying to fix these problems, which non can be fixed (yet)
Thanks in advanceRoam,
Thanks again for your suggestion,
"Furthermore one should always Repair Permissions both before doing a Software Update and again afterwards."
I honestly dont know anything about this "Repair Permissions" from the name, i though it is a verification of authentication to repair OS or some kind of credential issue, and since i m admin user then there is no point to verify it, i should be allowed to do so. Again it is my first time to do this thing in 3 - 4 years of using panther, every time i update software i never ever do this! If this step is essential for every update and installation why dont apple put them as one of TODO step during the processes (as licensing agreement) instead of keep them as an option (just my thought) Anyway, I m glad u tell me about it, and i will give it a shot tonight.
"That may because you didn't have sufficient disk space. In fact running out of disk space can create all sorts of problems. Please tell me how disk space is available on your
start up drive."
That what I thought coz i have only 5.x GB left in 60 GB HD. Thats why I claimed as whining and have to scarify the lost of data by reinstall panther in order to get my mac back to work
"So are you saying it is a bug or it is a hacker, I don't believe it is either"
Please see second update info about password, and i m not impose anyone to believe, thats why the topic is a questioning sentence "Is this a bug.."
"This Discussion site is not Applecare. The people here give their time voluntarily to those who are receptive to help."
Thats why i ask for "mac expert" not "apple authority/technician" and always appreciate any suggestion.
Anyway, that great to hear from you and i have learned new thing from your suggestion. I will let u know when i have tried it. -
Is this a bug in the xy-Graph?
Hi Forum,
I came across this problem while working on this (http://forums.ni.com/ni/board/message?board.id=170&message.id=478607#M478607) thread.
I add values from 0 to 1 to a XY-graph as in the picture below. (And only this way!)
When the user presses print a reference of the graph is handled to a sub vi.
In this SubVI there is another XY-Graph.
Now I copy all important properties of the MainVI-XY-Graph to the SubVI-XY-Graph.
This happens inside another SubVI, but this does not matter. The copy process could also happen inside the first subVI. Just a space saver.
Then the Image of the SubVI-XY-Graph is printed via a method node.
What I found is :
Run the MainVI (SubVI MUST NOT BE OPENED)
Change the scaling of the x-Axis (eg from scale the x-axis from 0.0 to 0.1)
Press Print
The file c:\pic.bmp will contain the graph, but the scaling will be from 0 to 1 not from 0.0 to 0.1 !!!!
If you run with the subVI showing itself, this will not happen.
And if you define the xy-Graph contents like this:the error does not occur.
For those who followed me until here:
Is this only in my mind or IS THIS A BUG ??????????????????
Thanks for reading
Christian
Solved!
Go to Solution.
Attachments:
MainVI.vi 70 KB
subVI.vi 81 KB
Copy_all_important_Properties.vi 22 KBProperties applied to hidden objects (or objects on screens that are not open) are generally "noops" for performance reasons. If you think i have mis-read your description please post back.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
[SOLVED] Possible Serious Steam Bug
I do not use steam, nor I am completely sure what it even is. I am not a gamer.
But, this little article http://linux.slashdot.org/story/15/01/1 … sers-files over on SlashDot indicates that there may be a serious bug in Steam. If you move its folder that could (according to the article) lead to loss of all user files.
I do not know if any of this is valid or applicable to Arch. I just wanted to flag this to avoid disaster in the event this is real.
Marked as solved as this has been taken care of upstream.
Last edited by ewaller (2015-01-23 22:25:54)Oh, so that's the reason this bug can happen? Guess I was lucky when I moved it away - didn't even know you could "reset" steam and brutishly ran "find-while-sed-i" over the whole thing instead :3
holy sh*t(abridged version):
steam.sh:18:STEAMROOT="$(cd "${0%/*}" && echo $PWD)"
steam.sh-427-function reset_steam()
steam.sh-428-{
steam.sh-447- # Don't let the user interrupt us, or they may corrupt the install
steam.sh-448- trap ignore_signal INT
steam.sh-467- # Scary!
steam.sh:468: rm -rf "$STEAMROOT/"*
steam.sh-489- return $STATUS
steam.sh-490-}
steam.sh:549:if [ "$1" = "--reset" ]; then
steam.sh:550: reset_steam
steam.sh-551- exit
steam.sh-552-fi
So... at least it looks like that's only possible to occur if you try to reset steam manually by using "steam.sh --reset"? Or is some other (install?) script/executable making use of that function automatically?
Last edited by whoops (2015-01-16 19:52:38) -
Media Encoder CC - Bug or just finicky?
I'm confused about Media Encoder, and hoping someone can help.
I have a short film that's primarily 4K ProRes augmented with some "flashbacks" that are 1920 by 1080 h264 files. All edits beautifully in my 4K ProRes timeline.
I have some Magic Bullet B&W corrections on the 1080 footage. On the 4K footage, I just have an overall grade in an Adjustment Layer (for now). I can play in Software Mode (CUDA won't work on my Retina Mac - separate thread!) at 1/4 resolution. The 4K stuff looks great, the 1080 pretty bad.
I've been outputting by matching sequence settings. The file is TITANIC, but looks great. I use that file to make various smaller files in APPLE COMPRESSOR. I find it better and more flexible (especially with cropping for 2.35, etc.) What can I say. All in all, the workflow works for me.
So here's the problem. Today I wanted to use In and Out to export a small section for music review with a colleague. No need to have a huge file, I just used Media Encoder in a Vimeo SD mode.
In the first attempt, the 1080 stuff oddly looked terrible. Just as it does when viewed at 1/4 resolution. To make sure everything was okay, I outputted that section at Matched Sequence settings. All good - the 1080 stuff had the Magic Bullet B&W look working great.
Then I tried again with the Vimeo SD setting. Only this time I checked Render at Maximum Resolution. Took FOREVER, but all good again. The 1080 stuff was fine.
Next I renendered "in to out" in my sequence (I hadn't done so previously - I was working "red line"). Output without checking Max Render Quality. Back to the horrible 1080 stuff.
Finally, I chose "use previews", but not max render. All good again.
So, at last a question. Does this make sense? I never before had to use either Maximum Render OR Use Previews to get acceptable quality with "device" settings. Is this a bug? Or related to my disparate picture sizes? Or something else? Thank you all![Moved to AME forum.]
I can see where this would be expected behavior. -
I am based in the UK and have just got a new iphone 6, everything works well except when i try to turn on the itunes store app - i can do a search and buy music etc that way, within the app, however, if i go to Music, Movies or the TV shows section within the Store app, i get a message come up saying "Item Not Available" - This item you've requested is not currently available in the UK Store, but it is available in the US store. Tap Change Store to view this item". I therefore cannot browse the music, movies or tv shows sections at all, nothing shows up except that message. All my previous itunes purchases have downloaded ok, and i can access them. My apple ID works fine and restrictions on the iphone are turned OFF. The App Store app works normally. Connection etc is all fine and I can access itunes in the normal way on my ipad and laptop, so this is just an iphone problem. Any ideas? is this a bug? I cant find anyone else with exactly the same problem. By the way, the same message comes up when i click on the red Music icon, on the iphone (situated next to the Safari icon) and then go to the "Store" via that app. my playlists are in tact, but as soon as i click that Store button, I am told that the Item is unavailable - not that i have chosen any Item lol, I just want to access the store in the normal way. Thank you in advance for any suggestions you can give
It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
Open Cursor Issue because of file browse Item - Is this a Bug in APEX 3.2
Hi All,
I am using file browse Item to upload file into the database at two places in my application, but it seems whenever I am submitting those two pages, with file path or without file path, its opening an cursor which remains open after that, because of this open cursor count in the application is getting exceeding every time.
For testing this I have made an dummy page containing just file browse item and submit button, and still it is increasing the open cursor count.
Is this a bug in Apex file browse item or there is some other way to handle this.
Please kindly help me in the above issue as this is affecting the production application.
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 5, 2010 9:57 PM
Edited by: user11204334 on Dec 5, 2010 9:58 PMHi,
One observation, Apex is switching the Session ID after one got killed ? I was working on Apex page with browse Item to test open cursor count,
after killing the SID (227) on which the open cursor count was getting increase, it APEX automatically switches to new SID(149) for that session.
Now the problem is even if I have two SID's and one hits the maximum open cursor count, It is not switching to other SID instead the whole application becomes unavailable.
STATNAME SID VALUE USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 74 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 227 325 APEX_PUBLIC_USER Killed
opened cursors current 244 15 APEX_PUBLIC_USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 76 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 244 15 APEX_PUBLIC_USER
Please kindly help in this.
Thanks in Advance
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 8, 2010 1:02 AM -
Is this a bug of Outlook 2007 about images displaying in signature?
I've done many tests and researched on website or MS KB. But still got no solution.
My issue is:
I make a signature with images linking from website which can be easily accessed.
I setup this signature in Outlook 2007, when I compose a new mail, and choose the signature I set. It won't show the images with a high percentage rate, meanwhile, I try to get into "Signature"-"Signature...",
Outlook2007 gets stuck, then you can not close Outlook or open Internet Explorer unless you kill the process of OUTLOOK.exe.
1. Test are done under a clean XP system and Office 2007 standard fresh installed. Also there are some other staffs who help me test the signature that report the same issue on Office 2007.
2. Images are rendered in 96dpi. They are all in very small size stored on website, can be easily accessed without network connctivity problem.
3. The signature is made by simple HTML language not by Outlook signature setup wizard. but in this case, you can ignore which method I use to create the signature. The images in signature can be displayed well in Outlook 2003 &
2010. Also I have tried insert images using "link to file" in Outlook signature setup wizard, got same issue.
4. Don't suggest me to store the images locally. These images should be updated after a period. You can not ask the company staffs to update these images manually by themselves. and even if the images are stored locally, the images won't be shown
in Outlook 2007 with a high percentage rate.
5. I've tried setup signature with or without an account profile, got same issue.
6. I 've tried without an accout profile, just copy the signature file to Outlook signature folder, unplug the network cable, and "new mail" then load the signature, of course, the images won't be shown because network connection doesn't exist,
and then when I try to get into "Signature"-"Signature...", the Outlook interface also gets stuck. So I think Outlook 2007 may have some problem on detecting the network connectivity.
7. It is not possible to upgrate the version of Office. Since Office 2007 isn't out of date and is powerful enough for us, no one want to pay more money just to avoid this issue.
I don't know why I cannot upload a screenshot for troubleshooting. If needed. I can send a mail with screenshot attached.
So far to now, I still get no solution, I think this is a bug of Outlook 2007, because the same signature, there is no problem on Outlook 2003 & 2010. Hope someone of MS staff can see this article and report to technical support center.
I would appriciate anyone's kindly help but please consider that you understand what I am talking about. I don't want to waste time for each of us.
thanks in advanced.What kind of problem about the display image in signature?
How do you add the image into the message body when you send the message?
Does it show correct through Web-based access?
Outlook 2007 doesn't support some of Style Element, you may reference the link as below:
http://www.campaignmonitor.com/css/
Thanks.
Tony Chen
TechNet Community Support
Thanks for your reply, I know that some Style Elements won't be supported in Outlook, but this is not the reason.
Please refer to my post previously, I post it but get no response.
http://social.technet.microsoft.com/Forums/office/en-US/481170b1-f23f-4d46-9914-823326491846/is-this-a-bug-of-outlook-2007-about-images-displaying-in-signature?forum=outlook
Maybe you are looking for
-
HT5625 apple id problems with apple id and icloud log on
hi all you dudes out there? i am having problems with my log on to itunes and icloud? really thye problem began some time ago when i got an upgrade from iphone 3s to iphone 4s, i kept my old iphone as a second phone then gave the old one to my mrs? t
-
IPOD NANO NOT RECOGNIZED by ITUNES but is Recognized by Windows
For those of you having this issue please reply with any information you may have. After reading 50 plus articles I have come to the conclusion that Apple's current version of ITunes 7+ is a secrete beta test unleashed on the unsuspecting public. I h
-
Just upgraded to iTunes 7. Tried to download Audiobooks from iTunes (both from Audible.com and iTunes Shop) to the iPod (40 GB). Everything looks normal in the downloading process. I dragged the audiobook from iTunes into the iPod, it showed the down
-
I just installed office 365 Home Premium editiion and have lost my ICloud capabilities. I cannot sign in nor will Photostream work. A message comes up that says I need Outlook on my computer (I had it before the 365 was loaded). I checked on-li
-
I have tried disc repair from the Tiger disc, that didn't work. Booted into safe mode but still can't launch the finder, anyone have any ideas. Thanks