[SOLVED] Mesa and Catalyst Conflicting

I have had this problem for a while. Everytime I use pacman -Syu, I have to comment out the extra repo. Otherwise, it says that mesa and catalyst are conflicting. Any solutions?
[username@arch ~]$ sudo pacman -Syu
:: Synchronizing package databases...
catalyst is up to date
catalyst-stable is up to date
catalyst-hd234k is up to date
testing is up to date
core is up to date
extra is up to date
community-testing is up to date
community is up to date
multilib-testing is up to date
multilib is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
:: mesa-libgl and catalyst-test are in conflict (libgl). Remove catalyst-test? [y/N]
Last edited by fiendfan1 (2013-10-16 04:45:53)

Mr.Elendig wrote:pacman -Qs xf86-video-
pacman -Qs 'dri$'
pacman -Qs xf86-video-
[fiendfan1@arch ~]$ sudo pacman -Qs xf86-video-
local/xf86-video-ark 0.7.5-3 (xorg-drivers xorg)
X.org ark video driver
local/xf86-video-ast 0.97.0-3 (xorg-drivers xorg)
X.org ASPEED AST Graphics video driver
local/xf86-video-cirrus 1.5.2-2 (xorg-drivers xorg)
X.org Cirrus Logic video driver
local/xf86-video-dummy 0.3.6-3 (xorg-drivers xorg)
X.org dummy video driver
local/xf86-video-fbdev 0.4.3-3 (xorg-drivers xorg)
X.org framebuffer video driver
local/xf86-video-glint 1.2.8-3 (xorg-drivers xorg)
X.org GLINT/Permedia video driver
local/xf86-video-i128 1.3.6-3 (xorg-drivers xorg)
X.org Number 9 I128 video driver
local/xf86-video-intel 2.21.13-1 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-mach64 6.9.4-2 (xorg-drivers xorg)
X.org mach64 video driver
local/xf86-video-mga 1.6.2-3 (xorg-drivers xorg)
X.org mga video driver
local/xf86-video-modesetting 0.8.0-1 (xorg-drivers xorg)
X.org generic modesetting video driver
local/xf86-video-neomagic 1.2.7-5 (xorg-drivers xorg)
X.org neomagic video driver
local/xf86-video-nouveau 1.0.8-1 (xorg-drivers xorg)
Open Source 2D acceleration driver for nVidia cards
local/xf86-video-nv 2.1.20-3 (xorg-drivers xorg)
X.org nv video driver
local/xf86-video-openchrome 0.3.3-1 (xorg-drivers xorg)
X.Org Openchrome drivers
local/xf86-video-r128 6.9.1-3 (xorg-drivers xorg)
X.org ati Rage128 video driver
local/xf86-video-savage 2.3.6-4 (xorg-drivers xorg)
X.org savage video driver
local/xf86-video-siliconmotion 1.7.7-3 (xorg-drivers xorg)
X.org siliconmotion video driver
local/xf86-video-sis 0.10.7-4 (xorg-drivers xorg)
X.org SiS video driver
local/xf86-video-tdfx 1.4.5-3 (xorg-drivers xorg)
X.org tdfx video driver
local/xf86-video-trident 1.3.6-4 (xorg-drivers xorg)
X.org Trident video driver
local/xf86-video-v4l 0.2.0-12 (xorg-drivers xorg)
X.org v4l video driver
local/xf86-video-vesa 2.3.2-3 (xorg-drivers xorg)
X.org vesa video driver
local/xf86-video-voodoo 1.2.5-3 (xorg-drivers xorg)
X.org 3dfx Voodoo1/Voodoo2 2D video driver
pacman -Qs 'dri$'
[fiendfan1@arch ~]$ pacman -Qs 'dri$'
local/catalyst-test 13.11-1
AMD/ATI testing/beta drivers, 13.11 beta 1. catalyst-hook + catalyst-utils +
lib32-catalyst-utils. Radeons HD 2 3 4 xxx ARE NOT SUPPORTED
local/intel-dri 9.1.5-1
Mesa drivers for Intel
local/nouveau-dri 9.1.5-1
Mesa drivers for Nouveau

Similar Messages

[solved] lib32-mesa-libgl and catalyst-total are in conflict

Steam now depends on lib32-mesa-libgl which is in conflict with catalyst-total.
lib32-mesa-libgl and catalyst-total are in conflict (lib32-libgl)
I'm not sure where to go from here.
EDIT:
catalyst-total was updated 5 minutes after I made this post. The issue has been resolved.
Last edited by beardedlinuxgeek (2013-02-26 19:32:00)

I have the same problem, please help

[SOLVED] catalyst-daemon and catalyst-hook are in conflict

hi
i want upgrade my system , but i see catalyst-hook and catalyst-daemon are in conflict and uneasy not install daemon and hook on system , so what can i do ?
[root@WhiteCrow1 arash]# pacman -Syu
:: Starting full system upgrade...
:: Replace catalyst with catalyst/catalyst-daemon? [Y/n] y
:: Replace catalyst with catalyst/catalyst-generator? [Y/n] y
:: Replace catalyst with catalyst/catalyst-hook? [Y/n] y
resolving dependencies...
looking for inter-conflicts...
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: catalyst-daemon and catalyst-hook are in conflict
Last edited by arastoo.s (2011-02-13 14:04:57)

As far as I know catalyst-daemon and catalyst-hook provide the same module so they are in conflict. The difference is that catalyst-daemon uses a daemon at startup to check for a new kernel and compile a new module when needed. Catalyst-hook does the same thing with a hook.
I picked the daemon method and just answered no to replace with -hook or -generator (catalyst-generator also conflicts with the others). Just choose the one you like.
https://wiki.archlinux.org/index.php/AT … D_packages

[SOLVED] mesa-libgl and nvidia-libgl are in conflict

:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
:: mesa-libgl and nvidia-libgl are in conflict (libgl). Remove nvidia-libgl? [y/N]
I don't have mesa-libgl installed... but using nvidia resp. nvidia-libgl
What's this all about? Why is it in conflict with a package not installed?
Last edited by rtfreedman (2013-09-28 22:58:49)

rtfreedman wrote:
Please post full output of pacman, and use [ code ] instead of [ quote ].
Well, I quoted the 'full output of pacman' - there was no code in it.
When pasting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.
It is important you post it in full, even (or especially) when it's so short. You should include the command you used, not just the output.
rtfreedman wrote:
You're doing an update and something is trying to install mesa-libgl which conflicts with the already installed nvidia-libgl.
Find out which package is it.
Why should an already installed package trying to install another package afterwards?
You are installing new versions of some packages. They may have different dependencies from the versions you have currently installed, so you will end up installing some new packages too.

Can't update Arch catalyst and libgl conflict

sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
catalyst is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
:: libgl and catalyst-utils are in conflict. Remove catalyst-utils? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: catalyst: requires catalyst-utils=11.3
:: lib32-catalyst-utils: requires catalyst-utils>=11.3
before i installed catalyst and catalyst utils
i had to do pacman -Rdd libgl
not sure if that was correct.

this is what i get for the first one
[pelt@arch ~]$ pacman -Qs xf86-video
local/xf86-video-apm 1.2.3-2 (xorg-drivers xorg)
X.org Alliance ProMotion video driver
local/xf86-video-ark 0.7.3-2 (xorg-drivers xorg)
X.org ark video driver
local/xf86-video-ast 0.91.10-2 (xorg-drivers xorg)
X.org ASPEED AST Graphics video driver
local/xf86-video-chips 1.2.4-1 (xorg-drivers xorg)
X.org Chips and Technologies video driver
local/xf86-video-cirrus 1.3.2-5 (xorg-drivers xorg)
X.org Cirrus Logic video driver
local/xf86-video-dummy 0.3.4-3 (xorg-drivers xorg)
X.org dummy video driver
local/xf86-video-fbdev 0.4.2-3 (xorg-drivers xorg)
X.org framebuffer video driver
local/xf86-video-glint 1.2.5-1 (xorg-drivers xorg)
X.org GLINT/Permedia video driver
local/xf86-video-i128 1.3.4-2 (xorg-drivers xorg)
X.org Number 9 I128 video driver
local/xf86-video-i740 1.3.2-5 (xorg-drivers xorg)
X.org Intel i740 video driver
local/xf86-video-mach64 6.8.2-5 (xorg-drivers xorg)
X.org mach64 video driver
local/xf86-video-mga 1.4.13-2 (xorg-drivers xorg)
X.org mga video driver
local/xf86-video-neomagic 1.2.5-3 (xorg-drivers xorg)
X.org neomagic video driver
local/xf86-video-nv 2.1.18-2 (xorg-drivers xorg)
X.org nv video driver
local/xf86-video-r128 6.8.1-5 (xorg-drivers xorg)
X.org ati Rage128 video driver
local/xf86-video-rendition 4.2.4-3 (xorg-drivers xorg)
X.org Rendition video driver
local/xf86-video-s3 0.6.3-4 (xorg-drivers xorg)
X.org S3 video driver
local/xf86-video-s3virge 1.10.4-4 (xorg-drivers xorg)
X.org S3 Virge video driver
local/xf86-video-savage 2.3.2-1 (xorg-drivers xorg)
X.org savage video driver
local/xf86-video-siliconmotion 1.7.5-1 (xorg-drivers xorg)
X.org siliconmotion video driver
local/xf86-video-sis 0.10.3-3 (xorg-drivers xorg)
X.org SiS video driver
local/xf86-video-sisusb 0.9.4-3 (xorg-drivers xorg)
X.org SiS USB video driver
local/xf86-video-tdfx 1.4.3-5 (xorg-drivers xorg)
X.org tdfx video driver
local/xf86-video-trident 1.3.4-3 (xorg-drivers xorg)
X.org Trident video driver
local/xf86-video-tseng 1.2.4-3 (xorg-drivers xorg)
X.org tseng video driver
local/xf86-video-v4l 0.2.0-7 (xorg-drivers xorg)
X.org v4l video driver
local/xf86-video-vesa 2.3.0-4 (xorg-drivers xorg)
X.org vesa video driver
local/xf86-video-vmware 11.0.3-2 (xorg-drivers xorg)
X.org vmware video driver
local/xf86-video-voodoo 1.2.4-3 (xorg-drivers xorg)
X.org 3dfx Voodoo1/Voodoo2 2D video driver
local/xf86-video-xgi 1.6.0-2 (xorg-drivers xorg)
X.org XGI video driver
local/xf86-video-xgixp 1.8.0-2 (xorg-drivers xorg)
X.org XGIXP video driver
second command returns nothing

[Solved] XServer 1.13 and Catalyst...

Hi, after the last update i can't start my xserver.
Systemd says, that gdm starts fine but i can't see anything except my tty
Heres the Xorg.0.log:
[ 170.848]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 170.878] X Protocol Version 11, Revision 0
[ 170.888] Build Operating System: Linux 3.6.0-1-ARCH x86_64
[ 170.899] Current Operating System: Linux arch247 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64
[ 170.899] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7f15c92f-c86f-49dd-ab06-f89a4a37d526 ro init=/usr/lib/systemd/systemd nomodeset
[ 170.924] Build Date: 05 October 2012 01:57:18PM
[ 170.937]
[ 170.949] Current version of pixman: 0.26.2
[ 170.976] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 170.976] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 171.033] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 18:30:14 2012
[ 171.049] (==) Using config file: "/etc/X11/xorg.conf"
[ 171.064] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 171.064] (==) ServerLayout "aticonfig Layout"
[ 171.064] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 171.064] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 171.064] (**) | |-->Device "aticonfig-Device[0]-0"
[ 171.064] (==) Automatically adding devices
[ 171.064] (==) Automatically enabling devices
[ 171.064] (==) Automatically adding GPU devices
[ 171.065] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 171.065] Entry deleted from font path.
[ 171.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 171.065] Entry deleted from font path.
[ 171.065] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 171.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 171.065] Entry deleted from font path.
[ 171.065] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 171.065] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 171.065] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 171.065] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 171.065] (II) Loader magic: 0x7fcc20
[ 171.065] (II) Module ABI versions:
[ 171.065] X.Org ANSI C Emulation: 0.4
[ 171.065] X.Org Video Driver: 13.0
[ 171.065] X.Org XInput driver : 18.0
[ 171.065] X.Org Server Extension : 7.0
[ 171.068] (--) PCI:*(0:0:1:0) 1002:9802:1043:84a5 rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[ 171.068] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 171.084] Initializing built-in extension Generic Event Extension
[ 171.099] Initializing built-in extension SHAPE
[ 171.114] Initializing built-in extension MIT-SHM
[ 171.130] Initializing built-in extension XInputExtension
[ 171.145] Initializing built-in extension XTEST
[ 171.160] Initializing built-in extension BIG-REQUESTS
[ 171.175] Initializing built-in extension SYNC
[ 171.190] Initializing built-in extension XKEYBOARD
[ 171.205] Initializing built-in extension XC-MISC
[ 171.220] Initializing built-in extension SECURITY
[ 171.235] Initializing built-in extension XINERAMA
[ 171.250] Initializing built-in extension XFIXES
[ 171.265] Initializing built-in extension RENDER
[ 171.280] Initializing built-in extension RANDR
[ 171.295] Initializing built-in extension COMPOSITE
[ 171.311] Initializing built-in extension DAMAGE
[ 171.326] Initializing built-in extension MIT-SCREEN-SAVER
[ 171.342] Initializing built-in extension DOUBLE-BUFFER
[ 171.358] Initializing built-in extension RECORD
[ 171.374] Initializing built-in extension DPMS
[ 171.390] Initializing built-in extension X-Resource
[ 171.406] Initializing built-in extension XVideo
[ 171.422] Initializing built-in extension XVideo-MotionCompensation
[ 171.439] Initializing built-in extension XFree86-VidModeExtension
[ 171.455] Initializing built-in extension XFree86-DGA
[ 171.472] Initializing built-in extension XFree86-DRI
[ 171.489] Initializing built-in extension DRI2
[ 171.489] (II) "glx" will be loaded by default.
[ 171.489] (II) LoadModule: "glx"
[ 171.489] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 171.490] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 171.490] compiled for 6.9.0, module version = 1.0.0
[ 171.507] Loading extension GLX
[ 171.507] (II) LoadModule: "fglrx"
[ 171.508] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 171.538] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 171.538] compiled for 1.4.99.906, module version = 9.0.2
[ 171.538] Module class: X.Org Video Driver
[ 171.538] (II) Loading sub module "fglrxdrm"
[ 171.538] (II) LoadModule: "fglrxdrm"
[ 171.539] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 171.539] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 171.539] compiled for 1.4.99.906, module version = 9.0.2
[ 171.539] (II) AMD Proprietary Linux Driver Version Identifier:9.00.2
[ 171.539] (II) AMD Proprietary Linux Driver Release Identifier: 9.00.11
[ 171.539] (II) AMD Proprietary Linux Driver Build Date: Sep 20 2012 11:56:16
[ 171.539] (--) using VT number 2
[ 171.649] (WW) Falling back to old probe method for fglrx
[ 171.660] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 171.663] ukiDynamicMajor: found major device number 251
[ 171.663] ukiDynamicMajor: found major device number 251
[ 171.663] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 171.663] ukiOpenDevice: node name is /dev/ati/card0
[ 171.663] ukiOpenDevice: open result is 9, (OK)
[ 171.663] ukiOpenDevice: Get driver state failed
[ 171.663] ukiOpenByBusid: ukiOpenMinor returns 9
[ 171.664] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 171.665] (--) Chipset Supported AMD Graphics Processor (0x9802) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:1) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 171.668] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 171.668] (II) AMD Video driver is signed
[ 171.669] (II) fglrx(0): pEnt->device->identifier=0x165d5a0
[ 171.669] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 171.670] (II) Loading sub module "vgahw"
[ 171.670] (II) LoadModule: "vgahw"
[ 171.670] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 171.670] (II) Module vgahw: vendor="X.Org Foundation"
[ 171.670] compiled for 1.13.0, module version = 0.1.0
[ 171.670] ABI class: X.Org Video Driver, version 13.0
[ 171.670] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 171.670] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 171.670] (==) fglrx(0): Default visual is TrueColor
[ 171.670] (**) fglrx(0): Option "DPMS" "true"
[ 171.671] (==) fglrx(0): RGB weight 888
[ 171.671] (II) fglrx(0): Using 8 bits per RGB
[ 171.671] (==) fglrx(0): Buffer Tiling is ON
[ 171.671] (II) Loading sub module "fglrxdrm"
[ 171.671] (II) LoadModule: "fglrxdrm"
[ 171.671] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 171.671] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 171.671] compiled for 1.4.99.906, module version = 9.0.2
[ 171.674] ukiDynamicMajor: found major device number 251
[ 171.675] ukiDynamicMajor: found major device number 251
[ 171.675] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 171.675] ukiOpenDevice: node name is /dev/ati/card0
[ 171.675] ukiOpenDevice: open result is 12, (OK)
[ 171.675] ukiOpenDevice: Get driver state failed
[ 171.675] ukiOpenByBusid: ukiOpenMinor returns 12
[ 171.675] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 171.675] (EE) fglrx(0): The graphics processor is already set to console mode, set X mode fail. Cannot start X.
[ 171.675] (EE) fglrx(0): PreInit failed
[ 171.675] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === end
[ 171.683] SetVBEMode failed
[ 171.683] (II) UnloadModule: "fglrx"
[ 171.683] (II) UnloadSubModule: "fglrxdrm"
[ 171.683] (II) Unloading fglrxdrm
[ 171.683] (II) UnloadSubModule: "vgahw"
[ 171.683] (II) Unloading vgahw
[ 171.683] (II) UnloadSubModule: "fglrxdrm"
[ 171.683] (EE) Screen(s) found, but none have a usable configuration.
[ 171.683]
Fatal server error:
[ 171.683] no screens found
[ 171.683] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 171.684] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 171.684] (EE)
[ 171.920] Server terminated with error (1). Closing log file.
Xserver is at version 1.13, catalyst should be at version 12.9
The xorg.conf-file was generated through aticonfig --inital and worked before the update. While searching the net i came across /etc/dbus-1/gdm.conf, maybe its a permission-problem?
Any help is appreciated
Last edited by D4ve (2012-10-13 21:31:54)

Had also a problem with xorg 1.13 and catalyst. (just not gdm but slim).
I found this:
The main graphics drivers have already been updated to support the new API. The proprietary NVIDIA graphics driver has also been updated for the X.Org Server 1.13 ABI. The only common driver not yet supporting this new xorg-server release is the AMD Catalyst binary driver, but the API/ABI support should be there within a few months.
Source: http://www.phoronix.com/scan.php?page=n … px=MTE3Njg
Seems that is the reason.
In this topic [1] Vi0L0 said that catalyst-test from AUR works with xorg 1.13 from [testing]. I didn't test that. I just downgraded xorg-server, xorg-server-common, catalyst-utils, lib32-catalyst-utils (and xf86-input-evdev because the newest package has always dep. to the newest xorg-server).
[1] https://bbs.archlinux.org/viewtopic.php … 0#p1172200
My package versions are (after downgrading):
xorg-server 1.12.4-1
xorg-server-common 1.12.4-1
catalyst 12.8-2
catalyst-utils 12.8-2
lib32-catalyst-utils 12.8-2
Edit: I just realised that there is a new catalyst package (catalyst-dkms) on the [community], i always used the package from the [catalyst] repo (Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch).
Last edited by sysrmr (2012-10-13 18:37:54)

Upgrading mesa with Catalyst drivers installed

With the recent changed to the mesa drivers (the drivers have been combined into one package called "mesa-dri"), "mesa-dri" is now a dependency of the "mesa" package. This is a problem for me because I do not want the mesa drivers since I am using the Catalyst proprietary drivers. I cannot simply remove the "mesa" package either because it is a dependency for some other packages on my system that I need. I am using the Catalyst drivers from the unofficial repo. Here is the output when I try to upgrade:
:: Synchronizing package databases...
xorg112 is up to date
catalyst-hd234k is up to date
core is up to date
extra is up to date
community is up to date
multilib is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
:: lib32-mesa-dri and lib32-catalyst-utils are in conflict (lib32-ati-dri). Remove lib32-catalyst-utils? [y/N]
Is there a way to resolve this conflict while keeping both "lib32-mesa" and "lib32-catalyst-utils"?

bboy716 wrote:I see from the wiki that the maintainer of the Catalyst unofficial repositories is Vi0L0. How do I go about contacting him about this issue?
You can contact him directly at the website of the AUR package. I already did and I'm waiting for his answer (I'm using the catalyst-total-hd234k package).

I want to install Photoshop but everytime I get an ERROR CODE: A12E1.How do I solve that and what is it?

Hello,
I want to install Photoshop but everytime I get an ERROR CODE: A12E1.How do I solve that and what is it?

A12E1 error installing Creative Cloud products | CC
Mylenium

How to deal with conflict and potential conflict classes?

Some classes are marked as conflict and potential conflict classes in the Classloader Analysis Tool.
How to deal with them?
How to use suggested solutions?

Not double load them.
Conflicting classes can lead to weird exceptions. One obvious example would be if you package
an older servlet.jar version into your application and use the weblogic classloading features, such
as prefer-web-inf-classes, to tell weblogic to use this class instead of the one provided in the
system classpath. This one example which leads to weird exceptions, such as connot process jsp tag...
If you really need a the version of the jar for your application, you have to test it through and through
so that you know you do not run into weird production errors.

No GLX on latest kernel, X, and catalyst

local/catalyst 11.7-1
local/catalyst-utils 11.6-1
local/lib32-catalyst-utils 11.6-1 (lib32)
local/xorg-server 1.10.3.901-1 (xorg)
local/linux 3.0.1-1 (base)
01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4870]
[max@gayforcetwo Steam]$ glxinfo
name of display: :0.0
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 18
Current serial number in output stream: 18
[max@gayforcetwo Steam]$ fglrxinfo
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 18
Current serial number in output stream: 18
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
What's going on?
Last edited by synthead (2011-08-11 17:53:31)

I don't know how you updated, but I use the catalyst repository, and in the last big update, there was an issue in the order of installing linux 3 and catalyst 11.7 (?), such that the fglrx hook failed. I had to redo building the image, whereupon the hook worked. Did you check for messages as it rebuilt the image?
Sorry if this was obvious, but I am not arch-guts/catalyst savvy.
HTH

ATI Catalyst Install Manager and catalyst Control Center Help

I just run the Windows 7 Upgrade
advisor report and it said that I should uninstall the ATI Catalyst Install Manager and Catalyst Control Center then reinstall after upgrade..
Could someone direct me where I might t find these programs for Windows 7

You must not do this. Just continue upgrade installation.
On my Satellite I got the same message but I have simply continued with upgrade.
At the end everything went fine.

Why does Scroll in IOS 8 and Swipe conflict?

Hi guys,
Why does Scroll in IOS 8 and Swipe conflict?
When I use swipe right or swipe left in EA and test it on IOS8 it works fine but if I scroll down
it triggers the swipe right or left assignment ...
Does anyone know a code to not have these two functions in conflict? I usually dodge this feature due to this ongoing
unfixed problem.
Thanks,
Henry Code

http://www.imore.com/having-issues-wallpapers-ios-7-heres-why-and-how-fix-it
 Cheers, Tom

LMS 3.2 and Catalyst 4500 WS-X4648-RJ45-E module card

Hi all,
I have a rpoblem with a specific client with LMS 3.2. We are using LMS 3.2 on Windows 2008 and everything seem to be working OK. The issue is in the CiscoView with the 4500 switches. CiscoView can see the supervisors on all 4500 switches (6); but cannot see the switchcards when the switchcards are WS-X4648-RJ45-E. Find the sh inv output below:
CSR-D1#sh inventory
NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4507R-E 7 slot switch "
PID: WS-C4507R-E       , VID: V01, SN: FOX1152GKR1
NAME: "Clock Module", DESCR: "Clock Module"
PID: WS-X4K-CLOCK-E    , VID: V01, SN: JAE120354DD
NAME: "Linecard(slot 1)", DESCR: "10/100/1000BaseT (RJ45) with 48 10/100/1000 baseT "
PID: WS-X4648-RJ45-E   , VID: V01, SN: JAE14410NLT
NAME: "Linecard(slot 2)", DESCR: "6 Dual media SFP or 10/100/1000BaseT (RJ45)V voice power ports (Cisco/IEEE)"
PID: WS-X4506-GB-T     , VID: V05, SN: JAE120351NC
NAME: "Linecard(slot 3)", DESCR: "Supervisor 6-E 10GE (X2), 1000BaseX (SFP) with 2 10GE X2 ports"
PID: WS-X45-SUP6-E     , VID: V01, SN: JAE120576HG
NAME: "TenGigabitEthernet3/1", DESCR: "10Gbase-LRM"
PID: FTLX1341E2-C1     , VID: A , SN: FNS1352175M
NAME: "TwinGig Converter 3/2", DESCR: "TwinGig Converter Module"
PID: 800-27645-01      , VID: A0 , SN: CAT1147H2WK
NAME: "Linecard(slot 4)", DESCR: "Supervisor 6-E 10GE (X2), 1000BaseX (SFP) with 2 10GE X2 ports"
PID: WS-X45-SUP6-E     , VID: V07, SN: JAE14080NL2
NAME: "TwinGig Converter 4/2", DESCR: "TwinGig Converter Module"
PID: 800-27645-01      , VID: A0 , SN: CAT1147H2BV
NAME: "Linecard(slot 7)", DESCR: "10/100/1000BaseT (RJ45) with 48 10/100/1000 baseT "
PID: WS-X4648-RJ45-E   , VID: V01, SN: JAE14420A2F
I have updated the s/w to 12.2(53) SG1 with no luck.
Any ideas?

Hi Nicos,
I have exactly the same issue with LMS 3.2 CiscoView under Windows 2003 and catalyst switch 4506-E.
4506-E are in IOS 12.2(53)SG2.
I installed latest 4500IOS V 19.0 ciscoview device package without success.
Did you fix your problem ?

Xmonad, xorg 1.9, and catalyst-test

Hi guys,
I'm running xorg 1.9 and catalyst-test on my HP Envy 15 (which contains a Radeon Mobility 5830.) Almost everything works; nothing strange appears in /var/log/Xorg.log or glxinfo. It's clear that my hardware acceleration is fine because I'm getting 200+ FPS in Extreme Tux Racer.
However, xmonad, of all things, is super-slow. When I switch workspaces or spawn tiled windows, the redraw lag is quite visible and I can see my CPU spike.
Amid other reports of X problems, I tried installing the backclear/catalyst-maximize-fix xserver packages from the catalyst repository, but those didn't seem to help. I also tried flipping the bit to enable XAA 2D acceleration, and that didn't seem to help either.
Any ideas as to why X doesn't seem to be accelerating this properly?

Yeeees, catalyst isn't supporting xserver 1.10 atm. Maybe 11.3 will support it, maybe.
Workaround is to:
- add xorg-server-* and xf86-input-* packages which you installed into pacman.conf's IgnorePkg list
- OR use [xorg19] repo - read wiki .

Dacl on ACS 5.1 and Catalyst switch 3560

Dear all
I have ACS 5.1 and Catalyst switch 3560 with version 12.2(53)SE. I configure a dacl on the ACS and I use it on authorization profile.
This authrization profile is used on access policy.
I tried the authentication but it doesn't work. I checked the ACS logs and I found that the user is authenicated successfuly but the dacl gives this error (The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected)
Steps:
11001 Received RADIUS Access-Request
11017 RADIUS created a new session
11025 The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected
11003 Returned RADIUS Access-Reject
DACL:
deny ip host 1.2.3.4 1.2.3.0 0.0.0.255 log
permit ip any any log
Thanks on advance,

Dear Tiago
I applied the command "radius-server vsa send". Now I can see the dacl is applied but I can't see it on the switch and even the authentication is succueeded ont the ACS logs but it give me unauthoized on the switchport. You can see the logs( started with the username acstest and the access-list is applied but it doesn't work and you can see theat it goes for mab after eap timed out). I hope you can help on this issue.
Dec 13,10 10:29:00.513 AM
00-23-AE-7A-58-A6
00-23-AE-7A-58-A6
Default Network Access
Lookup
Dot1x-3560-Switch
1.2.3.4
FastEthernet0/5
TESTACS
22056 Subject not found in the applicable identity store(s).
Dec 13,10 10:28:29.186 AM
#ACSACL#-IP-Guest-4cfcc14d
Dot1x-3560-Switch
1.2.3.4
TESTACS
Dec 13,10 10:28:28.726 AM
acstest
00-23-AE-7A-58-A6
Default Network Access
PEAP (EAP-MSCHAPv2)
Dot1x-3560-Switch
1.2.3.4
FastEthernet0/5
TESTACS
Thanks,

[SOLVED] Mesa and Catalyst Conflicting

Similar Messages

Maybe you are looking for