[SOLVED] No sound in browser

Hi everyone!
I recently moved from Ubuntu to Arch (Yeah!). Everything was fine, the installation was quite easy and I found everything I needed with on the official repos and AUR.
I only have one major problem: There is absolutely no sound in my browser (I tried both Firefox and Chromium). The problem is not only with flash, html5 audio does not work either.
The sound works in vlc, xmms2 and everything else, except for the browsers. I tried to figure out the problem for hours, looking in many forums and installing different packages.
I don't know where to go now. I don't really understand how do sound works in Linux and I don't know which information I should give here and where to find it.
Does anyone have an idea ? Which information should I dump here to help ?
Thanks !
Last edited by lracicot (2013-05-04 05:50:15)

Ok I solve my problem.
I have two sound card: "Generic" (HDMI) and "Generic_1" (Analog). The "alsa: default" device was set to "Generic".
I only changed the "alsa: default" device to use "Generic_1".
This post really helped my: https://bbs.archlinux.org/viewtopic.php?id=121049

Similar Messages

  • [SOLVED] No Sound on Fresh Install

    Well, I decided to try Arch. I was very proud of myself for managing to install everything. I even loaded KDE. I wanted to try a KDE only OS for a while.
    Well, all my pride was stomped out quicjky, in that I have no sound.  I did the following:
    1. installed: alsa-utils, alsa-oss, alsa-plugins
    2. unmuted the sound using alsamixer
    3. ran alsaconf, but found no supported drivers.
    4. Added @alsa as a daemon and rebooted
    No sound from browser. Tried an internet radio station with clementine and got:
    Could not open audio device for playback.
    Below I have tried to be helpful and posted as much output from various commands as I could. I am a newbie, and do not work in the computer indiustry. I actually do this for fun.
    Here are some outputs:
    natibo@myhost ~]$ ls -l /sys/module/snd/holders
    total 0
    lrwxrwxrwx 1 root root 0 Sep 24 20:00 snd_hda_codec -> ../../snd_hda_codec
    lrwxrwxrwx 1 root root 0 Sep 24 20:00 snd_hda_codec_hdmi -> ../../snd_hda_codec_hdmi
    lrwxrwxrwx 1 root root 0 Sep 24 20:00 snd_hda_codec_realtek -> ../../snd_hda_codec_realtek
    lrwxrwxrwx 1 root root 0 Sep 24 20:00 snd_hda_intel -> ../../snd_hda_intel
    lrwxrwxrwx 1 root root 0 Sep 24 20:00 snd_hwdep -> ../../snd_hwdep
    lrwxrwxrwx 1 root root 0 Sep 24 20:00 snd_pcm -> ../../snd_pcm
    lrwxrwxrwx 1 root root 0 Sep 24 20:00 snd_rawmidi -> ../../snd_rawmidi
    lrwxrwxrwx 1 root root 0 Sep 24 20:00 snd_seq_device -> ../../snd_seq_device
    lrwxrwxrwx 1 root root 0 Sep 24 20:00 snd_timer -> ../../snd_timer
    lrwxrwxrwx 1 root root 0 Sep 24 20:00 snd_usb_audio -> ../../snd_usb_audio
    lrwxrwxrwx 1 root root 0 Sep 24 20:00 snd_usbmidi_lib -> ../../snd_usbmidi_lib
    [natibo@myhost ~]$ cat /proc/asound/modules
    0 snd_usb_audio
    1 snd_hda_intel
    [natibo@myhost ~]$
    Some more:
    natibo@myhost ~]$ lsmod|grep '^snd' | column -t
    snd_hda_codec_hdmi 22092 1
    snd_hda_codec_realtek 294224 1
    snd_hda_intel 22122 4
    snd_hda_codec 77927 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
    snd_usb_audio 91809 2
    snd_usbmidi_lib 18665 1 snd_usb_audio
    snd_rawmidi 19519 1 snd_usbmidi_lib
    snd_seq_device 5268 1 snd_rawmidi
    snd_hwdep 6325 2 snd_hda_codec,snd_usb_audio
    snd_pcm 73888 5 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_usb_audio
    snd_timer 19416 2 snd_pcm
    snd 57818 21 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_usbmidi_lib,snd_rawmidi,snd_seq_device,snd_hwdep,snd_pcm,snd_timer
    snd_page_alloc 7121 2 snd_hda_intel,snd_pcm
    natibo@myhost ~]$ ls -l /dev/snd
    total 0
    drwxr-xr-x 2 root root 60 Sep 24 19:48 by-id
    drwxr-xr-x 2 root root 80 Sep 24 19:48 by-path
    crw-rw----+ 1 root audio 116, 11 Sep 24 19:48 controlC0
    crw-rw----+ 1 root audio 116, 9 Sep 24 19:48 controlC1
    crw-rw----+ 1 root audio 116, 8 Sep 24 19:48 hwC1D0
    crw-rw----+ 1 root audio 116, 7 Sep 24 19:48 hwC1D3
    crw-rw----+ 1 root audio 116, 10 Sep 24 19:49 pcmC0D0c
    crw-rw----+ 1 root audio 116, 6 Sep 24 19:49 pcmC1D0c
    crw-rw----+ 1 root audio 116, 5 Sep 24 19:50 pcmC1D0p
    crw-rw----+ 1 root audio 116, 4 Sep 24 19:50 pcmC1D1p
    crw-rw----+ 1 root audio 116, 3 Sep 24 19:48 pcmC1D2c
    crw-rw----+ 1 root audio 116, 2 Sep 24 19:48 pcmC1D3p
    crw-rw---- 1 root audio 116, 1 Sep 24 19:48 seq
    crw-rw----+ 1 root audio 116, 33 Sep 24 19:48 timer
    Last edited by natibo (2011-09-27 12:49:08)

    I tried to play a .wav but failed. I followed everything on the alsa wiki page. I can still hear the KDE test sounds quite well. My gut tells me it's got to be something simple since I can get some sound! Ugh. I don't want to give up, but I am getting closer. I did not like Chakra.
    Here is my code.
    [natibo@myhost ~]$ cat /proc/asound/modules
    1 snd_usb_audio
    2 snd_hda_intel
    [natibo@myhost ~]$
    [natibo@myhost ~]$ ls -l /sys/module/snd/holders
    total 0
    lrwxrwxrwx 1 root root 0 Sep 26 18:39 snd_hda_codec -> ../../snd_hda_codec
    lrwxrwxrwx 1 root root 0 Sep 26 18:39 snd_hda_codec_hdmi -> ../../snd_hda_codec_hdmi
    lrwxrwxrwx 1 root root 0 Sep 26 18:39 snd_hda_codec_realtek -> ../../snd_hda_codec_realtek
    lrwxrwxrwx 1 root root 0 Sep 26 18:39 snd_hda_intel -> ../../snd_hda_intel
    lrwxrwxrwx 1 root root 0 Sep 26 18:39 snd_hwdep -> ../../snd_hwdep
    lrwxrwxrwx 1 root root 0 Sep 26 18:39 snd_pcm -> ../../snd_pcm
    lrwxrwxrwx 1 root root 0 Sep 26 18:39 snd_rawmidi -> ../../snd_rawmidi
    lrwxrwxrwx 1 root root 0 Sep 26 18:39 snd_seq_device -> ../../snd_seq_device
    lrwxrwxrwx 1 root root 0 Sep 26 18:39 snd_timer -> ../../snd_timer
    lrwxrwxrwx 1 root root 0 Sep 26 18:39 snd_usb_audio -> ../../snd_usb_audio
    lrwxrwxrwx 1 root root 0 Sep 26 18:39 snd_usbmidi_lib -> ../../snd_usbmidi_lib
    natibo@myhost ~]$ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 2: Intel [HDA Intel], device 0: ALC889 Analog [ALC889 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 2: Intel [HDA Intel], device 1: ALC889 Digital [ALC889 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    [natibo@myhost ~]$

  • No sound in browser; sys: linux

    Running Linux; using Foxfire 3.xx; NO sound through browser;
    yes I have system sounds.

    Running Linux; using Foxfire 3.xx; NO sound through browser;
    yes I have system sounds.

  • Shuttle quickly in Sound & Music Browser?

    Hi,
    When I'm in FCP X and open the Sound & Music Browser (my iTunes Library) - I see al my songs.  Good!
    If I want to listen to one, but fast forward it, of shuttle around within the song quickly - is there a way to do this?
    I can only click and play on a song to hear it, or select it.  But if I want to hear different parts of it quickly, I don't seem to be able to shuttle around - unless I specifically go and open iTunes - which then kinda defeats the purpose of accessing it quickly while in FCP X!
    Hopefully one of you experts can do this?
    Thanks,
    Larry

    Going to try and explain my situation a bit better.
    Say I'm playing a game, or there is a sound playing that resembles a heart beat. The heart beats, then there is no sound, then beats again. Well my music from iTunes, is quieter when the heart beats, and goes back to normal volume when there is no sound playing from my browser.

  • [SOLVED] Bad Sound Quality, Audacity, playback , via browser

    Playback on the following page is fine:
    https://soundcloud.com/playmerecords/ja … vy-jayne-2
    Original File, downloaded via official channe :
    https://www.dropbox.com/sh/u9683vhoqqn2 … mix%29.mp3
    My sample from Audacity
    https://www.dropbox.com/sh/u9683vhoqqn2 … 20-%20.mp3
    Images of configs and programs:
    https://dl.dropboxusercontent.com/u/3044885/issue1.png
    https://dl.dropboxusercontent.com/u/3044885/issue2.png
    https://dl.dropboxusercontent.com/u/3044885/issue3.png
    https://dl.dropboxusercontent.com/u/3044885/issue4.png
    https://dl.dropboxusercontent.com/u/3044885/issue5.png
    System Info:
    Linux ArchBoxMTD 3.10.7-1-ARCH
    AlsaMixeer v1.0.27.2
    Pulseaudio 4.0
    Audacity 2.0.3 (official package from Arch)
    But, when I record with Audacity, playback (before exporting), is shoddy.  I noticed my dB levels lower than normal when monitoring my audio/recording in Audacity.  Before I remember I had to even LOWER the default dB level of recording in pavucontrol/sound center.  I've done this many times on Arch, and I have had no new hardware.  I have tried changing the output/input device on the main screen in Audacity several times to no effect.  I never had to before.  Now, on Arch I have always had to set the inital dB recording level via sound prefs, not via Audacity as the "Input Volume" slider on Audacity was always grayed out, but never an issue before.
    If you need additional information, please let me know. 
    Thank you
    _professor
    Last edited by degmic71 (2013-08-22 15:58:09)

    ooo wrote:
    first of all, if your pulseaudio setup is working for you there's no reason to break it really..
    historically, the reason for using sound servers like pulseaudio over alsa, is that some sound cards don't support hardware mixing with alsa, which means you coudn't play audio from eg. audacious and youtube at the same time. Nowadays alsa has software mixing support (via dmix plugin if I'm not mistaken) so Its not usually an issue any more.
    I have very limited experience with pulseaudio, and can't be sure of the differences. Generally I believe alsa can do most of the stuff pulseaudio can, but if you've ever looked at configuring alsa, you might know it could be a real pita especially in more advanced setups. From my limited experience with pulseaudio, I think it could be easier to set up on some cases and often just works out of the box. I could also have some audio over network capabilities that alsa might lack, but that again is just my assumption.
    also I'm pretty sure pulseaudio is required for some desktop environments like gnome.
    just use whatever method works for you
    I remember having that EXACT issue back in ~04-06.  That was the most annoying thing, and the reason why I started to use pulse back then.  Oh I know the pitfalls of alsa, which is why I understand pulse co-existing on Arch's cinnamon package setup.  Cool, well thanks for the advice!

  • [Solved] Flash No Sound In Browser

    Hi All,
    Having problems getting audio from any flash video. I am currently running 64 bit arch (3.5.4-1-ARCH). I have ALSA installed and working. I listen to Amarok for radio and mplayer to watch movies.
    I have my .asoundrc with this
    pcm.!default {
    type hw
    card 0
    ctl.!default {
    type hw
    card 0
    Output of aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: CA0106 [CA0106], device 0: ca0106 [CA0106]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: CA0106 [CA0106], device 1: ca0106 [CA0106]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: CA0106 [CA0106], device 2: ca0106 [CA0106]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: CA0106 [CA0106], device 3: ca0106 [CA0106]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    In Phonon all the devices are set to the sound card and verified testing (via test button). Still sounds doesn't work with any flash application in Chromium or FF. Upon running either of them from the command line I don't see any error.
    I was afraid that another program grabbed the sound devices so I rebooted the desktop and first thing opened is FF and still no sound. YES I did make sure every thing is unmutted (fell for that in the past   )
    Also to add I am running Xmonad as windows manager so no Gnome or KDE desktop.
    Update: Updated arch and still no change. Seems like Flash to using wrong sounds device but I don't know how else to force other than asoundrc
    Any ideas?
    Last edited by mr337 (2012-10-10 17:00:32)

    hadrons123 wrote:A workaround
    https://bbs.archlinux.org/viewtopic.php?id=134892
    I would really not like to install Pulse.
    I can try a couple of reboot and reinstall flash plugin but it looks like they never quite fixed it nor found the cause. The problem just doesn't add up. Will post back with results.
    Update: Reinstalling flash/rebooting several times didn't fix anything
    Last edited by mr337 (2012-10-10 16:10:21)

  • [SOLVED]No Sound - ALSA - Maybe wrong audio device.

    Yesterday I installed Arch and it has been going well except that I can not get my sound working. Following https://wiki.archlinux.org/index.php/Ad … chitecture I installed alsa-utils and then used alsamixer to unmute channels. While I experimented with the channels I had a youtube video open and so I should have heard something if it had worked.
    I seem to have two sound cards. When I run alsamixer it defaults to the "Intel Haswell HDMI" chip and "Item: S/PDIF". I can unmute the S/PDIF channels but there is no volume bar. I suspect that this device is set as a default somewhere but it is not the one I want to use.
    Hitting F6 and choosing the "HDA Intel PCH" card has many columns. I have them all unmuted and I've played around quite a bit with turning various things up and down. The speaker I have in plugged into the back of the desktop I am using and is attached with both a round pale green connector and a usb connector.
    When I turn up the volume on the <Rear Mic> I can hear the static volume go up on the speaker. So I could change the volume on the speaker but the speaker was not getting audio from the web browser I had open.  When I turn up the volume on the <Front Mic> I can hear a high pitched noise increase, my only guess for where its coming from is the tiny speaker that I have plugged right into the motherboard.
    I've tried researching and I would like to try and change the default sound card like in this thread: https://bbs.archlinux.org/viewtopic.php?id=186597. But I'm afraid that I'm newer to Arch/Linux than those people or at least I'm confused trying to follow that advice. My /etc/modprobe.d directory is empty. If I made a .conf file like in that answer I would not know what to name it.
    Here is the output of some relevant (hopefully) commands:
    $ lspci -vnn | grep -A 1 -i audio
    00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
    Subsystem: ASRock Incorporation Device [1849:0c0c]
    00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
    Subsystem: ASRock Incorporation Device [1849:8892]
    $ aplay -lL
    null
    Discard all samples (playback) or generate zero samples (capture)
    hdmi:CARD=HDMI,DEV=0
    HDA Intel HDMI, HDMI 0
    HDMI Audio Output
    hdmi:CARD=HDMI,DEV=1
    HDA Intel HDMI, HDMI 1
    HDMI Audio Output
    hdmi:CARD=HDMI,DEV=2
    HDA Intel HDMI, HDMI 2
    HDMI Audio Output
    default:CARD=PCH
    HDA Intel PCH, ALC892 Analog
    Default Audio Device
    sysdefault:CARD=PCH
    HDA Intel PCH, ALC892 Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Front speakers
    surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    2.1 Surround output to Front and Subwoofer speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Digital
    IEC958 (S/PDIF) Digital Audio Output
    **** List of PLAYBACK Hardware Devices ****
    card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    lsmod | grep snd
    snd_hda_codec_hdmi 53248 1
    snd_hda_codec_realtek 65536 1
    snd_hda_codec_generic 65536 1 snd_hda_codec_realtek
    snd_hda_intel 28672 0
    snd_hda_controller 28672 1 snd_hda_intel
    snd_hda_codec 114688 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 16384 1 snd_hda_codec
    snd_pcm 90112 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 28672 1 snd_pcm
    snd 69632 8 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
    soundcore 16384 2 snd,snd_hda_codec
    $ speaker-test
    speaker-test 1.0.29
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 1 channels
    Using 16 octaves of pink noise
    ALSA lib pcm_dmix.c:1024:(snd_pcm_dmix_open) unable to open slave
    Playback open error: -2,No such file or directory
    Thank you for reading.
    Last edited by buffalo (2015-06-13 22:47:37)

    I followed Head_on_a_Stick's advice and the speaker is now working! Thank you so much Head_on_a_Stick. The one other time I posted on this forum was last February and you helped me out then too. You are my favorite!
    Thank you ewaller as well, but rather than look at aplay -l I think I will mark this thread as [SOLVED].
    The thing I'm still curious about is how did you know what to name the file  /etc/modprobe.d/alsa-base.conf ?
    Time for me to figure out how to get the headphone jack working.

  • Only iTunes shows up in the Music and Sound media browser

    I just upgraded to FCP 10.1 and I'm noticing that the media browser only show iTunes content in Music and Sound. No sound effects (foley, etc.) are included as before.
    Is this simply that FCP no longer includes these or should there be something other than iTunes there?

    Thanks Tom. After a few reboots, music is back. Thanks again. Looking for the "solved" button and nothing. I will marked solved when I am able to.
    Thanks again.
    Best.
    Tom

  • [SOLVED] No sound in latest flashplugin

    I recently upgraded my flasplugin to 10.3.183.5-1.
    Since then no sound (in any browser : FF or opera).
    I'm running the latest kernel (3.0.3-1)
    Anybody having the same problem ?
    Last edited by Strider (2011-08-19 21:00:36)

    Hm,
    my flashplugin is working again with sound ...
    No clue why that happened all of sudden.
    Anyway the problem is gone So I'll mark this as solved for now.

  • [solved] No sound, ALSA finds soundcard, pulseaudio does not.

    Problem:
    pulseaudio can't find my soundcard (or it can't find ALSA, not sure). It falls back to a dummy-output and no input so i can't play sounds or use my mic.
    First appeared when:
    Installing software updates like a month ago. I ignored it at first in the hopes it will resolve itself with the next update an few dates later. It didn't so far. None of the packets I updated had linux|pulse|alsa|sound|audio in its name. So i guess it just triggered the problem in a indirect way.
    What did not help:
    Reinstalling packets with pulse|alsa|sound|audio in its name.
    Deleting ${HOME}/.pulse* .
    Rebooting.
    Resetting /etc/pulse/* or /etc/asound.conf to the defaults of the packaes they come with.
    Adding or removing my user to the audio group.
    Googling. Other threads i this forum.
    Additional infos:
    (Stuff that was requested from others which had similar problems. No other [solved]-threads were helping me so far.)
    /dev/dsp does not exist.
    fuser -v /dev/snd/* returns nothing
    aplay whatever.wav produces no sound.
    aplay -D sysdefault whatever.wav works.
    Using Gnome 3 started with gdm.
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=Intel
    HDA Intel, ALC272 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=Intel,DEV=0
    HDA Intel, HDMI 0
    HDMI Audio Output
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b76a0fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b76a1000-0x00000000b76a6fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b76a7000-0x00000000b77d1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b77d2000-0x00000000b780efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b780f000-0x00000000b7908fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7909000-0x00000000b7b0efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b0f000-0x00000000b7b18fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b19000-0x00000000b7b1efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b1f000-0x00000000b7b62fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b63000-0x00000000b7b9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b9f000-0x00000000b7be4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7be5000-0x00000000b7bfefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000b7bff000-0x00000000b7bfffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7c00000-0x00000000b7dfffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Dell Inc. Inspiron 1370/0R8PR3, BIOS A01 09/15/2009
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0xb7c00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D3FFF write-protect
    [ 0.000000] D4000-DBFFF uncachable
    [ 0.000000] DC000-EFFFF write-back
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0B8000000 mask FF8000000 uncachable
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0FFE40000 mask FFFFC0000 write-protect
    [ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f6bf0-0x000f6bff] mapped at [ffff8800000f6bf0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xb7bfffff]
    [ 0.000000] [mem 0x00000000-0xb7bfffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xb7bfffff @ [mem 0x1fffc000-0x1fffffff]
    [ 0.000000] RAMDISK: [mem 0x376e2000-0x37b68fff]
    [ 0.000000] ACPI: RSDP 00000000000f6b10 00024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 00000000b7bf7369 00064 (v01 DELL CL09 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000b7be7000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000b7be8000 077A9 (v02 Dell CANTIGA 06040000 INTL 20060608)
    [ 0.000000] ACPI: FACS 00000000b7b9efc0 00040
    [ 0.000000] ACPI: HPET 00000000b7bfed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000b7bfed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: OSFR 00000000b7bfed8a 00070 (v01 DELL DELL 06040000 ASL 00000061)
    [ 0.000000] ACPI: APIC 00000000b7bfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000b7bfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000b7bfee8a 00176 (v01 DELL CL09 06040000 LTP 00000000)
    [ 0.000000] ACPI: SSDT 00000000b7be6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b7bfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb7bfffff]
    [ 0.000000] NODE_DATA [mem 0xb7be1000-0xb7be4fff]
    [ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b4000000-ffff8800b6dfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xb76a0fff]
    [ 0.000000] node 0: [mem 0xb76a7000-0xb77d1fff]
    [ 0.000000] node 0: [mem 0xb780f000-0xb7908fff]
    [ 0.000000] node 0: [mem 0xb7b0f000-0xb7b18fff]
    [ 0.000000] node 0: [mem 0xb7b1f000-0xb7b62fff]
    [ 0.000000] node 0: [mem 0xb7b9f000-0xb7be4fff]
    [ 0.000000] node 0: [mem 0xb7bff000-0xb7bfffff]
    [ 0.000000] On node 0 totalpages: 751850
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11696 pages used for memmap
    [ 0.000000] DMA32 zone: 736171 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
    [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000b76a1000 - 00000000b76a7000
    [ 0.000000] PM: Registered nosave memory: 00000000b77d2000 - 00000000b780f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7909000 - 00000000b7b0f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7b19000 - 00000000b7b1f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7b63000 - 00000000b7b9f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7be5000 - 00000000b7bff000
    [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7400000 s84608 r8192 d21888 u1048576
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 740084
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2944188k/3010560k available (4727k kernel code, 3160k absent, 63212k reserved, 4143k data, 772k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 12058624 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1296.696 MHz processor
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.45 BogoMIPS (lpj=4322320)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003400] Security Framework initialized
    [ 0.003407] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003948] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.006850] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.008132] Mount-cache hash table entries: 256
    [ 0.008498] Initializing cgroup subsys cpuacct
    [ 0.008503] Initializing cgroup subsys memory
    [ 0.008517] Initializing cgroup subsys devices
    [ 0.008520] Initializing cgroup subsys freezer
    [ 0.008522] Initializing cgroup subsys net_cls
    [ 0.008525] Initializing cgroup subsys blkio
    [ 0.008570] CPU: Physical Processor ID: 0
    [ 0.008572] CPU: Processor Core ID: 0
    [ 0.008575] mce: CPU supports 6 MCE banks
    [ 0.008587] CPU0: Thermal monitoring enabled (TM2)
    [ 0.008592] process: using mwait in idle threads
    [ 0.008600] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift is 0xffffffff
    [ 0.010851] ACPI: Core revision 20120711
    [ 0.016699] ftrace: allocating 18348 entries in 72 pages
    [ 0.027201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061706] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
    [ 0.063329] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.063329] ... version: 2
    [ 0.063329] ... bit width: 40
    [ 0.063329] ... generic registers: 2
    [ 0.063329] ... value mask: 000000ffffffffff
    [ 0.063329] ... max period: 000000007fffffff
    [ 0.063329] ... fixed-purpose events: 3
    [ 0.063329] ... event mask: 0000000700000003
    [ 0.086782] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.100007] smpboot: Booting Node 0, Processors #1 OK
    [ 0.113162] Brought up 2 CPUs
    [ 0.113162] smpboot: Total of 2 processors activated (5188.90 BogoMIPS)
    [ 0.113436] devtmpfs: initialized
    [ 0.116686] PM: Registering ACPI NVS region [mem 0xb7b63000-0xb7b9efff] (245760 bytes)
    [ 0.121465] NET: Registered protocol family 16
    [ 0.121699] ACPI: bus type pci registered
    [ 0.121824] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.121828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.174683] PCI: Using configuration type 1 for base access
    [ 0.175619] bio: create slab <bio-0> at 0
    [ 0.175619] ACPI: Added _OSI(Module Device)
    [ 0.175619] ACPI: Added _OSI(Processor Device)
    [ 0.175619] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.175619] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.178073] ACPI: EC: Look up EC in DSDT
    [ 0.182902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.188123] ACPI: SSDT 00000000b7b1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.188671] ACPI: Dynamic OEM Table Load:
    [ 0.188676] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.188875] ACPI: SSDT 00000000b7b19620 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [ 0.189399] ACPI: Dynamic OEM Table Load:
    [ 0.189404] ACPI: SSDT (null) 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [ 0.189425] ACPI: SSDT 00000000b7b1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    [ 0.190407] ACPI: Dynamic OEM Table Load:
    [ 0.190412] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    [ 0.190429] ACPI: SSDT 00000000b7b1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    [ 0.190693] ACPI: Dynamic OEM Table Load:
    [ 0.190698] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    [ 0.190715] ACPI: Interpreter enabled
    [ 0.190715] ACPI: (supports S0 S3 S4 S5)
    [ 0.190715] ACPI: Using IOAPIC for interrupt routing
    [ 0.323314] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [ 0.323314] ACPI: No dock devices found.
    [ 0.323314] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.323314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.323314] PCI host bridge to bus 0000:00
    [ 0.323314] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
    [ 0.323314] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.323314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.323314] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.323314] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
    [ 0.323314] DMAR: Forcing write-buffer flush capability
    [ 0.323314] DMAR: Disabling IOMMU for graphics on this chipset
    [ 0.323314] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
    [ 0.323314] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.323314] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.323314] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
    [ 0.323314] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
    [ 0.323314] pci 0000:00:02.1: reg 10: [mem 0xf0400000-0xf04fffff 64bit]
    [ 0.323314] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
    [ 0.323314] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
    [ 0.323314] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
    [ 0.323314] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
    [ 0.323314] pci 0000:00:1a.7: reg 10: [mem 0xf0804800-0xf0804bff]
    [ 0.323314] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.323314] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
    [ 0.323314] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
    [ 0.323314] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.323342] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
    [ 0.323470] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.323513] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
    [ 0.323640] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.323688] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
    [ 0.323816] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.323860] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
    [ 0.323931] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
    [ 0.324017] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
    [ 0.324087] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
    [ 0.324173] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
    [ 0.324243] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
    [ 0.324346] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
    [ 0.324379] pci 0000:00:1d.7: reg 10: [mem 0xf0804c00-0xf0804fff]
    [ 0.324516] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.324552] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.324666] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
    [ 0.324866] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
    [ 0.324900] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
    [ 0.324915] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
    [ 0.324931] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
    [ 0.324946] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
    [ 0.324960] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
    [ 0.324975] pci 0000:00:1f.2: reg 24: [mem 0xf0804000-0xf08047ff]
    [ 0.325062] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.325096] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
    [ 0.325123] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
    [ 0.325160] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
    [ 0.325277] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
    [ 0.325283] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.325366] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
    [ 0.325632] pci 0000:08:00.0: [14e4:4315] type 00 class 0x028000
    [ 0.325707] pci 0000:08:00.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
    [ 0.326109] pci 0000:08:00.0: supports D1 D2
    [ 0.326112] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
    [ 0.326304] pci 0000:00:1c.1: PCI bridge to [bus 08]
    [ 0.326314] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.326391] pci_bus 0000:20: busn_res: [bus 20] is inserted under [bus 00-ff]
    [ 0.326477] pci 0000:20:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.326546] pci 0000:20:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.326670] pci 0000:20:00.0: reg 18: [mem 0xf0904000-0xf0904fff 64bit pref]
    [ 0.326745] pci 0000:20:00.0: reg 20: [mem 0xf0900000-0xf0903fff 64bit pref]
    [ 0.326794] pci 0000:20:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.327093] pci 0000:20:00.0: supports D1 D2
    [ 0.327096] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.327302] pci 0000:00:1c.5: PCI bridge to [bus 20]
    [ 0.327309] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 0.327323] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.327363] pci_bus 0000:26: busn_res: [bus 26] is inserted under [bus 00-ff]
    [ 0.327435] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
    [ 0.327452] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.327456] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.327460] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.327463] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.327467] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 0.327471] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.327505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.327638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.327717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.327766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.327824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.327883] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.327886] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.334993] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.335069] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.335141] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.335212] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.335283] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.335355] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
    [ 0.335424] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.335495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.336671] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.336689] vgaarb: loaded
    [ 0.336691] vgaarb: bridge control possible 0000:00:02.0
    [ 0.336769] PCI: Using ACPI for IRQ routing
    [ 0.348092] PCI: pci_cache_line_size set to 64 bytes
    [ 0.348605] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.348608] e820: reserve RAM buffer [mem 0xb76a1000-0xb7ffffff]
    [ 0.348614] e820: reserve RAM buffer [mem 0xb77d2000-0xb7ffffff]
    [ 0.348619] e820: reserve RAM buffer [mem 0xb7909000-0xb7ffffff]
    [ 0.348623] e820: reserve RAM buffer [mem 0xb7b19000-0xb7ffffff]
    [ 0.348627] e820: reserve RAM buffer [mem 0xb7b63000-0xb7ffffff]
    [ 0.348631] e820: reserve RAM buffer [mem 0xb7be5000-0xb7ffffff]
    [ 0.348634] e820: reserve RAM buffer [mem 0xb7c00000-0xb7ffffff]
    [ 0.348791] NetLabel: Initializing
    [ 0.348794] NetLabel: domain hash size = 128
    [ 0.348796] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.348816] NetLabel: unlabeled traffic allowed by default
    [ 0.348840] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.348847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.348855] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.370000] Switching to clocksource hpet
    [ 0.381464] pnp: PnP ACPI init
    [ 0.381496] ACPI: bus type pnp registered
    [ 0.382022] pnp 00:00: [bus 00-ff]
    [ 0.382027] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.382031] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.382035] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.382039] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.382042] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.382046] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.382050] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.382053] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.382057] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.382060] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.382064] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.382067] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.382071] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.382075] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.382078] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.382086] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.382089] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.382093] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [ 0.382097] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.382100] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.382200] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.440057] pnp 00:01: [io 0x0000-0x001f]
    [ 0.440061] pnp 00:01: [io 0x0081-0x0091]
    [ 0.440065] pnp 00:01: [io 0x0093-0x009f]
    [ 0.440068] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.440072] pnp 00:01: [dma 4]
    [ 0.440121] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.440232] pnp 00:02: [mem 0xfed00000-0xfed003ff]
    [ 0.440329] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.440336] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.440353] pnp 00:03: [io 0x00f0]
    [ 0.440369] pnp 00:03: [irq 13]
    [ 0.440414] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.440433] pnp 00:04: [io 0x002e-0x002f]
    [ 0.440436] pnp 00:04: [io 0x0061]
    [ 0.440439] pnp 00:04: [io 0x0063]
    [ 0.440443] pnp 00:04: [io 0x0065]
    [ 0.440446] pnp 00:04: [io 0x0067]
    [ 0.440449] pnp 00:04: [io 0x0070]
    [ 0.440452] pnp 00:04: [io 0x0080]
    [ 0.440456] pnp 00:04: [io 0x0092]
    [ 0.440459] pnp 00:04: [io 0x00b2-0x00b3]
    [ 0.440462] pnp 00:04: [io 0x0480-0x048f]
    [ 0.440466] pnp 00:04: [io 0xffff]
    [ 0.440469] pnp 00:04: [io 0xffff]
    [ 0.440472] pnp 00:04: [io 0x0400-0x047f]
    [ 0.440475] pnp 00:04: [io 0x1180-0x11ff]
    [ 0.440479] pnp 00:04: [io 0xfe00]
    [ 0.440482] pnp 00:04: [io 0xff2c-0xff7f]
    [ 0.440574] system 00:04: [io 0x0480-0x048f] has been reserved
    [ 0.440578] system 00:04: [io 0xffff] has been reserved
    [ 0.440583] system 00:04: [io 0xffff] has been reserved
    [ 0.440587] system 00:04: [io 0x0400-0x047f] has been reserved
    [ 0.440591] system 00:04: [io 0x1180-0x11ff] has been reserved
    [ 0.440596] system 00:04: [io 0xfe00] has been reserved
    [ 0.440600] system 00:04: [io 0xff2c-0xff7f] has been reserved
    [ 0.440606] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.440620] pnp 00:05: [io 0x0070-0x0077]
    [ 0.440629] pnp 00:05: [irq 8]
    [ 0.440674] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.440691] pnp 00:06: [io 0x0060]
    [ 0.440694] pnp 00:06: [io 0x0064]
    [ 0.440703] pnp 00:06: [irq 1]
    [ 0.440753] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.440772] pnp 00:07: [irq 12]
    [ 0.440819] pnp 00:07: Plug and Play ACPI device, IDs DLL0418 PNP0f13 (active)
    [ 0.441027] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
    [ 0.441031] pnp 00:08: [mem 0xfed10000-0xfed13fff]
    [ 0.441034] pnp 00:08: [mem 0xfed18000-0xfed18fff]
    [ 0.441038] pnp 00:08: [mem 0xfed19000-0xfed19fff]
    [ 0.441041] pnp 00:08: [mem 0xe0000000-0xefffffff]
    [ 0.441045] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
    [ 0.441048] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
    [ 0.441146] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.441151] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.441155] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.441159] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.441164] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.441168] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.441172] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.441178] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.441356] pnp: PnP ACPI: found 9 devices
    [ 0.441359] ACPI: ACPI bus type pnp unregistered
    [ 0.449759] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.449766] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.449771] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.449786] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
    [ 0.449791] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
    [ 0.449807] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 20] add_size 400000
    [ 0.449828] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.449833] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.449837] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.449841] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
    [ 0.449845] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.449849] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.449858] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
    [ 0.449864] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.449869] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.449874] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc0afffff]
    [ 0.449880] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.449885] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.449890] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0b00000-0xc0b000ff 64bit]
    [ 0.449908] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.449913] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.449922] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
    [ 0.449929] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.449939] pci 0000:00:1c.1: PCI bridge to [bus 08]
    [ 0.449944] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.449953] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.449960] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.449971] pci 0000:20:00.0: BAR 6: assigned [mem 0xf0920000-0xf093ffff pref]
    [ 0.449975] pci 0000:00:1c.5: PCI bridge to [bus 20]
    [ 0.449980] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 0.449989] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc0afffff]
    [ 0.449996] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.450021] pci 0000:00:1e.0: PCI bridge to [bus 26]
    [ 0.450083] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.450089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.450093] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.450097] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.450101] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.450105] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
    [ 0.450108] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.450112] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 0.450116] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
    [ 0.450120] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.450124] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
    [ 0.450127] pci_bus 0000:08: resource 1 [mem 0xf0500000-0xf05fffff]
    [ 0.450131] pci_bus 0000:08: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.450135] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
    [ 0.450139] pci_bus 0000:20: resource 1 [mem 0xc0600000-0xc0afffff]
    [ 0.450142] pci_bus 0000:20: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.450146] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
    [ 0.450150] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
    [ 0.450154] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.450157] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.450161] pci_bus 0000:26: resource 8 [mem 0xc0000000-0xdfffffff]
    [ 0.450165] pci_bus 0000:26: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.450219] NET: Registered protocol family 2
    [ 0.451401] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.456144] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.456812] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.456888] TCP: reno registered
    [ 0.456903] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.456958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.457123] NET: Registered protocol family 1
    [ 0.457150] pci 0000:00:02.0: Boot video device
    [ 0.457669] PCI: CLS 64 bytes, default 64
    [ 0.457746] Unpacking initramfs...
    [ 0.626300] Freeing initrd memory: 4636k freed
    [ 0.628543] Simple Boot Flag at 0x3e set to 0x1
    [ 0.629045] audit: initializing netlink socket (disabled)
    [ 0.629069] type=2000 audit(1354288244.626:1): initialized
    [ 0.648430] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.651510] VFS: Disk quotas dquot_6.5.2
    [ 0.651590] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.651831] msgmni has been set to 5759
    [ 0.652156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.652204] io scheduler noop registered
    [ 0.652208] io scheduler deadline registered
    [ 0.652301] io scheduler cfq registered (default)
    [ 0.652518] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.652689] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.652857] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.653107] intel_idle: does not run on family 6 model 23
    [ 0.653156] GHES: HEST is not enabled!
    [ 0.653245] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.653953] Linux agpgart interface v0.103
    [ 0.654073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.669080] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.669133] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.669294] mousedev: PS/2 mouse device common for all mice
    [ 0.670409] rtc_cmos 00:05: RTC can wake from S4
    [ 0.670599] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.670636] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.670648] cpuidle: using governor ladder
    [ 0.670651] cpuidle: using governor menu
    [ 0.670829] drop_monitor: Initializing network drop monitor service
    [ 0.670946] TCP: cubic registered
    [ 0.671122] NET: Registered protocol family 10
    [ 0.671359] NET: Registered protocol family 17
    [ 0.671373] Key type dns_resolver registered
    [ 0.671720] PM: Hibernation image not present or could not be loaded.
    [ 0.671743] registered taskstats version 1
    [ 0.672782] rtc_cmos 00:05: setting system clock to 2012-11-30 15:10:45 UTC (1354288245)
    [ 0.674872] Freeing unused kernel memory: 772k freed
    [ 0.675168] Write protecting the kernel read-only data: 8192k
    [ 0.682434] Freeing unused kernel memory: 1408k freed
    [ 0.683107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.685881] Freeing unused kernel memory: 568k freed
    [ 0.698116] systemd-udevd[43]: starting version 195
    [ 0.701918] SCSI subsystem initialized
    [ 0.703991] ACPI: bus type scsi registered
    [ 0.704082] libata version 3.00 loaded.
    [ 0.705773] ahci 0000:00:1f.2: version 3.0
    [ 0.705858] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 0.705949] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    [ 0.705955] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
    [ 0.705962] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.708617] scsi0 : ahci
    [ 0.709413] scsi1 : ahci
    [ 0.709823] scsi2 : ahci
    [ 0.710229] scsi3 : ahci
    [ 0.710359] ata1: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 43
    [ 0.710365] ata2: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 43
    [ 0.710367] ata3: DUMMY
    [ 0.710370] ata4: DUMMY
    [ 1.196712] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.196745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.198401] ata1.00: ATA-8: WDC WD3200BEKT-75F3T0, 11.01A11, max UDMA/133
    [ 1.198405] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.200123] ata1.00: configured for UDMA/133
    [ 1.200301] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-7 11.0 PQ: 0 ANSI: 5
    [ 1.201956] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.202042] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.202047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.202083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.213584] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633F, D500, max UDMA/100
    [ 1.213590] ata2.00: applying bridge limits
    [ 1.229911] ata2.00: configured for UDMA/100
    [ 1.232328] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633F D500 PQ: 0 ANSI: 5
    [ 1.270602] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
    [ 1.271452] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.273864] ACPI: bus type usb registered
    [ 1.273912] usbcore: registered new interface driver usbfs
    [ 1.273946] usbcore: registered new interface driver hub
    [ 1.273996] usbcore: registered new device driver usb
    [ 1.274813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.274869] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 1.274876] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 1.274891] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 1.278814] ehci_hcd 0000:00:1a.7: debug port 1
    [ 1.278826] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.278852] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0804800
    [ 1.279113] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.279117] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.280054] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.286696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.286950] hub 1-0:1.0: USB hub found
    [ 1.286958] hub 1-0:1.0: 6 ports detected
    [ 1.287158] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.287164] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.287174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.291082] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.291093] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.291118] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00
    [ 1.300028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.300266] hub 2-0:1.0: USB hub found
    [ 1.300273] hub 2-0:1.0: 6 ports detected
    [ 1.301086] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.301130] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.301135] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.301145] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.301191] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
    [ 1.301506] hub 3-0:1.0: USB hub found
    [ 1.301513] hub 3-0:1.0: 2 ports detected
    [ 1.301640] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.301645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.301654] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.301701] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
    [ 1.301997] hub 4-0:1.0: USB hub found
    [ 1.302004] hub 4-0:1.0: 2 ports detected
    [ 1.302158] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 1.302164] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 1.302198] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 1.302230] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
    [ 1.302434] hub 5-0:1.0: USB hub found
    [ 1.302441] hub 5-0:1.0: 2 ports detected
    [ 1.302557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.302562] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.302572] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.302603] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
    [ 1.302824] hub 6-0:1.0: USB hub found
    [ 1.302833] hub 6-0:1.0: 2 ports detected
    [ 1.303165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.303171] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.303186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.303219] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
    [ 1.303759] hub 7-0:1.0: USB hub found
    [ 1.303766] hub 7-0:1.0: 2 ports detected
    [ 1.303897] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.303903] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.303995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.304040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
    [ 1.304881] hub 8-0:1.0: USB hub found
    [ 1.304888] hub 8-0:1.0: 2 ports detected
    [ 1.323613] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 1.330105] [drm] Initialized drm 1.1.0 20060810
    [ 1.331660] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 1.331843] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 1.333755] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
    [ 1.333940] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 1.334797] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 1.334889] ACPI: Lid Switch [LID0]
    [ 1.335079] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 1.335086] ACPI: Power Button [PWRB]
    [ 1.335191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 1.335196] ACPI: Power Button [PWRF]
    [ 1.341526] i915 0000:00:02.0: setting latency timer to 64
    [ 1.414990] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 1.415006] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 1.415008] [drm] Driver supports precise vblank timestamp query.
    [ 1.415071] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.606699] usb 2-4: new high-speed USB device number 2 using ehci_hcd
    [ 1.630029] tsc: Refined TSC clocksource calibration: 1296.749 MHz
    [ 1.630036] Switching to clocksource tsc
    [ 2.030864] fbcon: inteldrmfb (fb0) is primary device
    [ 2.090024] usb 2-5: new high-speed USB device number 3 using ehci_hcd
    [ 2.574662] Console: switching to colour frame buffer device 170x48
    [ 2.579271] fb0: inteldrmfb frame buffer device
    [ 2.579273] drm: registered panic notifier
    [ 2.680113] acpi device:07: registered as cooling_device0
    [ 2.780104] acpi device:08: registered as cooling_device1
    [ 2.780177] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 2.780313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
    [ 2.780358] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.963907] device-mapper: uevent: version 1.0.3
    [ 2.964084] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
    [ 3.763615] atkbd serio0: Unknown key pressed (translated set 2, code 0x8e on isa0060/serio0).
    [ 3.763622] atkbd serio0: Use 'setkeycodes e00e <keycode>' to make it known.
    [ 9.679599] XFS (dm-0): Mounting Filesystem
    [ 9.807350] XFS (dm-0): Ending clean mount
    [ 10.447920] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
    [ 10.481565] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 10.507375] systemd[1]: Set hostname to <xxx-laptop>.
    [ 11.844864] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 11.845276] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 11.845371] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 11.845393] systemd[1]: Starting Login Prompts.
    [ 11.845414] systemd[1]: Reached target Login Prompts.
    [ 11.845429] systemd[1]: Starting Arch Daemons.
    [ 11.845447] systemd[1]: Reached target Arch Daemons.
    [ 11.845462] systemd[1]: Starting Remote File Systems.
    [ 11.845481] systemd[1]: Reached target Remote File Systems.
    [ 11.845496] systemd[1]: Starting Syslog Socket.
    [ 11.845558] systemd[1]: Listening on Syslog Socket.
    [ 11.845576] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 11.845615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 11.845630] systemd[1]: Starting Delayed Shutdown Socket.
    [ 11.845668] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 11.845766] systemd[1]: Starting udev Kernel Socket.
    [ 11.845804] systemd[1]: Listening on udev Kernel Socket.
    [ 11.845885] systemd[1]: Starting udev Control Socket.
    [ 11.845927] systemd[1]: Listening on udev Control Socket.
    [ 11.845979] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 11.846139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 11.846157] systemd[1]: Expecting device dev-mapper-home.device...
    [ 11.846175] systemd[1]: Expecting device dev-sda8.device...
    [ 11.846193] systemd[1]: Expecting device dev-mapper-swap.device...
    [ 11.846210] systemd[1]: Expecting device dev-sda6.device...
    [ 11.846232] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 11.846291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 11.846308] systemd[1]: Expecting device dev-disk-by\x2duuid-f19efb1f\x2d9a5b\x2d4f22\x2db35d\x2d4a603145a436.device...
    [ 11.846328] systemd[1]: Expecting device dev-disk-by\x2duuid-bd984744\x2d036e\x2d47e5\x2db40f\x2d04fa9f6d0f35.device...
    [ 11.846347] systemd[1]: Expecting device dev-disk-by\x2duuid-f1bab4e5\x2de736\x2d443a\x2d827e\x2d59f202a548ab.device...
    [ 11.846368] systemd[1]: Starting Journal Socket.
    [ 11.846439] systemd[1]: Listening on Journal Socket.
    [ 11.846467] systemd[1]: Started File System Check on Root Device.
    [ 11.846485] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 11.850382] systemd[1]: Mounting Temporary Directory...
    [ 11.998839] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
    [ 12.026864] systemd[1]: Mounting Huge Pages File System...
    [ 12.040270] systemd[1]: Mounting POSIX Message Queue File System...
    [ 12.043518] systemd[1]: Starting udev Coldplug all Devices...
    [ 12.156149] systemd[1]: Starting Load Kernel Modules...
    [ 12.173525] systemd[1]: Mounting Debug File System...
    [ 12.186770] systemd[1]: Starting Setup Virtual Console...
    [ 12.484840] systemd[1]: Starting Apply Kernel Variables...
    [ 12.616915] systemd[1]: Starting Set Up Additional Binary Formats...
    [ 12.630266] systemd[1]: Starting udev Kernel Device Manager...
    [ 12.636850] systemd[1]: Starting Journal Service...
    [ 12.646587] systemd[1]: Started Journal Service.
    [ 12.646650] systemd[1]: Starting Syslog.
    [ 12.646684] systemd[1]: Reached target Syslog.
    [ 12.647637] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 12.647816] systemd[1]: Mounted Temporary Directory.
    [ 12.647972] systemd[1]: Mounted Huge Pages File System.
    [ 12.648127] systemd[1]: Mounted POSIX Message Queue File System.
    [ 12.653654] systemd[1]: Mounted Debug File System.
    [ 12.653705] systemd[1]: Starting Local File Systems (Pre).
    [ 12.653726] systemd[1]: Reached target Local File Systems (Pre).
    [ 12.653749] systemd[1]: Starting Load Random Seed...
    [ 12.705203] FS-Cache: Loaded
    [ 12.740616] RPC: Registered named UNIX socket transport module.
    [ 12.740621] RPC: Registered udp transport module.
    [ 12.740624] RPC: Registered tcp transport module.
    [ 12.740626] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 12.881473] systemd-udevd[162]: starting version 196
    [ 12.988696] FS-Cache: Netfs 'nfs' registered for caching
    [ 13.298794] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 13.299212] r8169 0000:20:00.0: irq 45 for MSI/MSI-X
    [ 13.299501] r8169 0000:20:00.0: eth0: RTL8168d/8111d at 0xffffc9000060e000, 00:26:b9:ca:52:29, XID 081000c0 IRQ 45
    [ 13.299506] r8169 0000:20:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 13.401185] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 13.802403] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 14.148667] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 14.148733] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 14.208405] cfg80211: Calling CRDA to update world regulatory domain
    [ 14.318480] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
    [ 14.330974] lib80211: common routines for IEEE802.11 drivers
    [ 14.330979] lib80211_crypt: registered algorithm 'NULL'
    [ 14.375031] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 14.649332] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
    [ 14.656959] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
    [ 14.660799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
    [ 14.668564] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 14.709327] ACPI: Requesting acpi_cpufreq
    [ 14.714946] Monitor-Mwait will be used to enter C-1 state
    [ 14.714973] Monitor-Mwait will be used to enter C-2 state
    [ 14.714989] Monitor-Mwait will be used to enter C-3 state
    [ 14.715001] tsc: Marking TSC unstable due to TSC halts in idle
    [ 14.715031] ACPI: acpi_idle registered with cpuidle
    [ 14.720557] Switching to clocksource hpet
    [ 14.757813] wmi: Mapper loaded
    [ 15.215288] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
    [ 15.215300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 15.215306] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
    [ 15.215313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 15.215315] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 15.303785] ACPI: Battery Slot [BAT1] (battery present)
    [ 15.405750] input: Dell WMI hotkeys as /devices/virtual/input/input8
    [ 15.417769] iTCO_vendor_support: vendor-support=0
    [ 15.430131] ACPI: AC Adapter [ACAD] (off-line)
    [ 15.471845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 15.471895] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
    [ 15.472076] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 15.585541] wl: module license 'Mixed/Proprietary' taints kernel.
    [ 15.585549] Disabling lock debugging due to kernel taint
    [ 15.625424] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 528343
    [ 15.629342] INFO @wl_cfg80211_attach : Registered CFG80211 phy
    [ 15.654093] lib80211_crypt: registered algorithm 'TKIP'
    [ 15.654584] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
    [ 15.693893] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
    [ 15.816131] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
    [ 15.816143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 16.108446] Linux media interface: v0.10
    [ 16.120558] Linux video capture interface: v2.00
    [ 16.169228] usbcore: registered new interface driver uas
    [ 16.281166] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6415)
    [ 16.316308] Initializing USB Mass Storage driver...
    [ 16.316609] usbcore: registered new interface driver usb-storage
    [ 16.316613] USB Mass Storage support registered.
    [ 16.328744] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input10
    [ 16.328873] usbcore: registered new interface driver uvcvideo
    [ 16.328876] USB Video Class driver (1.1.1)
    [ 16.779720] usb 2-4: USB disconnect, device number 2
    [ 16.783629] scsi4 : usb-storage 2-4:1.0
    [ 16.783773] usbcore: registered new interface driver ums-realtek
    [ 17.381988] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
    [ 17.393596] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 21.567415] Adding 977880k swap on /dev/mapper/swap. Priority:-1 extents:1 across:977880k
    [ 21.656824] XFS (dm-1): Mounting Filesystem
    [ 21.839619] XFS (dm-1): Ending clean mount
    [ 21.940898] systemd-journald[163]: Received SIGUSR1
    [ 28.055735] r8169 0000:20:00.0: eth0: link down
    [ 28.055792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 28.875645] Bluetooth: Core ver 2.16
    [ 28.875677] NET: Registered protocol family 31
    [ 28.875680] Bluetooth: HCI device and connection manager initialized
    [ 28.875684] Bluetooth: HCI socket layer initialized
    [ 28.875687] Bluetooth: L2CAP socket layer initialized
    [ 28.875695] Bluetooth: SCO socket layer initialized
    [ 29.041069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 37.807702] fuse init (API version 7.20)
    [ 37.828734] EXT4-fs (sda5): re-mounted. Opts: commit=600
    lsmod
    Module Size Used by
    fuse 69173 2
    michael_mic 2074 8
    arc4 2039 4
    ecb 2105 0
    bnep 8857 2
    bluetooth 192120 7 bnep
    snd_seq 50881 1
    snd_seq_device 5268 1 snd_seq
    ums_realtek 7391 0
    usb_storage 47384 1 ums_realtek
    uvcvideo 72787 0
    videobuf2_vmalloc 2468 1 uvcvideo
    uas 11119 0
    videobuf2_memops 2246 1 videobuf2_vmalloc
    videobuf2_core 24030 1 uvcvideo
    videodev 100859 2 uvcvideo,videobuf2_core
    media 10405 2 uvcvideo,videodev
    i2c_i801 9571 0
    joydev 9991 0
    coretemp 6070 0
    kvm_intel 124749 0
    lib80211_crypt_tkip 7738 0
    wl 2558087 0
    kvm 373917 1 kvm_intel
    iTCO_wdt 5255 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    dell_wmi 1485 0
    acpi_cpufreq 5933 1
    lpc_ich 10609 0
    ac 2536 0
    mperf 1267 1 acpi_cpufreq
    sparse_keymap 3056 1 dell_wmi
    battery 6773 0
    wmi 8379 1 dell_wmi
    dell_laptop 8787 0
    processor 26855 3 acpi_cpufreq
    evdev 10266 12
    psmouse 71909 0
    serio_raw 4689 0
    dcdbas 5520 1 dell_laptop
    lib80211 3949 2 wl,lib80211_crypt_tkip
    microcode 12377 0
    cfg80211 177108 1 wl
    rfkill 15604 5 cfg80211,bluetooth
    snd_hda_codec_hdmi 24487 1
    snd_hda_codec_realtek 61193 1
    snd_hda_intel 26180 3
    snd_hda_codec 98033 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6428 1 snd_hda_codec
    snd_pcm_oss 38992 0
    snd_pcm 75689 5 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    snd_timer 18934 3 snd_pcm,snd_seq
    snd_mixer_oss 15347 1 snd_pcm_oss
    snd 60188 16 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss
    soundcore 5442 1 snd
    pcspkr 1899 0
    r8169 56839 0
    mii 4091 1 r8169
    nfs 127007 0
    lockd 64904 1 nfs
    sunrpc 186092 2 nfs,lockd
    fscache 40995 1 nfs
    ablk_helper 1972 0
    cryptd 8741 1 ablk_helper
    aes_x86_64 7508 6
    aes_generic 26138 1 aes_x86_64
    xts 3101 3
    gf128mul 6050 1 xts
    dm_crypt 15799 3
    dm_mod 72105 7 dm_crypt
    i915 495521 3
    video 11276 1 i915
    button 4662 1 i915
    i2c_algo_bit 5391 1 i915
    intel_agp 10744 1 i915
    intel_gtt 15659 3 i915,intel_agp
    drm_kms_helper 32877 1 i915
    drm 218852 4 i915,drm_kms_helper
    i2c_core 20707 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
    vfat 10119 0
    fat 48338 1 vfat
    xfs 748207 2
    ext4 440434 1
    crc16 1359 2 ext4,bluetooth
    jbd2 78751 1 ext4
    mbcache 5977 1 ext4
    uhci_hcd 23436 0
    ehci_hcd 41816 0
    sr_mod 14823 0
    usbcore 150398 6 uas,uhci_hcd,uvcvideo,ums_realtek,usb_storage,ehci_hcd
    usb_common 954 1 usbcore
    cdrom 35520 1 sr_mod
    sd_mod 29559 5
    ahci 21360 4
    libahci 20023 1 ahci
    libata 167683 2 ahci,libahci
    scsi_mod 133386 5 uas,usb_storage,libata,sd_mod,sr_mod
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
    20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
    pacman -Q | grep ...
    alsa-lib 1.0.26-1
    alsa-plugins 1.0.26-1
    alsa-utils 1.0.26-1
    alsaplayer 0.99.81-5
    lib32-alsa-lib 1.0.26-1
    lib32-alsa-plugins 1.0.26-1
    lib32-libpulse 2.1-1
    lib32-libsndfile 1.0.25-2
    libcanberra-pulse 0.30-2
    libcdaudio 0.99.12-6
    libpulse 2.1-1
    libsndfile 1.0.25-2
    portaudio 19_20111121-1
    pulseaudio 2.1-1
    pulseaudio-alsa 2-1
    sound-juicer 3.5.0-1
    sound-theme-freedesktop 0.8-1
    soundtouch 1.6.0-1
    teamspeak-soundpack-portal 1-4
    webrtc-audio-processing 0.1-1
    pactl list
    Module #0
    Name: module-device-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the volume/mute state of devices"
    module.version = "2.1"
    Module #1
    Name: module-stream-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the volume/mute/device state of streams"
    module.version = "2.1"
    Module #2
    Name: module-card-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore profile of cards"
    module.version = "2.1"
    Module #3
    Name: module-augment-properties
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Augment the property sets of streams with additional static information"
    module.version = "2.1"
    Module #4
    Name: module-udev-detect
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Detect available audio hardware and load matching drivers"
    module.version = "2.1"
    Module #5
    Name: module-jackdbus-detect
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "David Henningsson"
    module.descript

    I set the loglevel to debug and rebooted.
    grep -i pulse /var/log/everything.log
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    Dec 3 00:06:34 localhost rtkit-daemon[442]: Successfully made thread 713 of process 713 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: RealtimeKit worked.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: Successfully gained nice level -11.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: This is PulseAudio 2.1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Found 2 CPUs.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Page size is 4096 bytes
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compiled with Valgrind support: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in valgrind mode: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in VM: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Optimized build: yes
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in system mode: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes.tdb'
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes'.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes.tdb'
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes'.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database.tdb'
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database'.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-udev-detect.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: Found 1 cards.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-jackdbus-detect.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus f8aad50a9c72259e812fef8050bbed02 as :1.11
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #5; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-bluetooth-discover.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus aca7467032ad6386c1a812c250bbecf9 as :1.27
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #6; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-esound-protocol-unix.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-gconf.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-gconf" (index: #9; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.description = "Dummy Output"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.class = "abstract"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.icon_name = "audio-card"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.class = "monitor"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    Dec 3 01:06:35 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Thread starting up
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-null-sink" (index: #12; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-console-kit.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-systemd-login.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 0 "Login Session 1"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-systemd-login.c: Added new session 1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-dbus-protocol.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #23; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.PulseAudio1!
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.pulseaudio.Server!
    Dec 3 01:06:35 localhost pulseaudio[710]: [pulseaudio] main.c: Daemon startup successful.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Daemon startup complete.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module22
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module23
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client2
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/gnome-shell.desktop.
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client3
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for canberra-gtk-play
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 3 "canberra-gtk-play"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client3
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    Dec 3 00:06:38 localhost rtkit-daemon[442]: Successfully made thread 745 of process 745 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: RealtimeKit worked.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: Successfully gained nice level -11.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: This is PulseAudio 2.1
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Found 2 CPUs.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Page size is 4096 bytes
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compiled with Valgrind support: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in valgrind mode: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in VM: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Optimized build: yes
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in system mode: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] pid.c: Daemon already running.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client4
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-publish" (index: #24; argument: "display=:0").
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module24
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 4 "pactl"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client4
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client5
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-x11-xsmp.c: Connected to session manager 'gnome-session' as '102459fa9aeb823737135449319899169800000005480030'.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 6 "XSMP Session on gnome-session as 102459fa9aeb823737135449319899169800000005480030"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-xsmp" (index: #25; argument: "display=:0 session_manager=local/whatever-laptop:@/tmp/.ICE-unix/548,unix/whatever-laptop:/tmp/.ICE-unix/548").
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client6
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module25
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 5 "pactl"
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client5
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
    Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client7
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0000, resuming
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 0 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 54188 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 0 "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 1 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream1
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 352800 bytes.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream1
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 1 "audio-volume-change"
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:28 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Synced.
    By now I also made my system not load any moudules which have oss in their name. Didn't help either.

  • [Solved] Multiple sounds at the same time

    Hello!
    I've just received my new Creative X-Fi Titanium since I was in need of an optical in socket and have spent a while trying to get it to work to my liking.
    I read through the ALSA wiki, read countless posts on the forums such as this one http://bbs.archlinux.org/viewtopic.php?pid=702994, tried several .asoundrc files and of course read the related arch wiki pages without much success.
    Everything is upmixed properly to 5.1 output but I still can't play two sounds at once - with one odd exception:
    When I have mpd playing and start a youtube video, sound will play but it will only output through the 2 front speakers and I can pause and unpause mpd normally, sound will return.
    When I pause mpd and play a youtube video, it gets upmixed properly but mpd returns "error: problems opening sound device".
    Mplayer returns [AO_ALSA] alsa-lib: pcm_hw.c:1291:(snd_pcm_hw_open) open /dev/snd/pcmC0D0p failed: Invalid argument and [AO_ALSA] alsa-lib: pcm_dmix.c:1060:(snd_pcm_dmix_open) unable to open slave.
    Heroes of Newerth returns the same: ALSA lib pcm_dmix.c:1060:(snd_pcm_dmix_open) unable to open slave.
    fuser -v /dev/snd/*
    /dev/snd/controlC0: eyescream 27612 F.... Steam.exe
    /dev/snd/pcmC0D0p: eyescream 27612 F...m Steam.exe
    fuser -v /dev/dsp*
    zsh: no matches found: /dev/dsp*
    cat .asoundrc
    pcm.snd_card {
    type hw
    card 0 # change to your cards number or name
    # 6 channel dmix:
    pcm.dmix6 {
    type dmix
    ipc_key 1024
    ipc_key_add_uid false
    ipc_perm 0666
    slave {
    pcm "hw:0,0"
    rate 48000
    format "S32_LE"
    channels 6
    period_time 0
    period_size 1024
    buffer_time 0
    buffer_size 8192
    # upmixing:
    pcm.ch51dup {
    type route
    slave.pcm dmix6
    slave.channels 6
    ttable.0.0 1
    ttable.1.1 1
    ttable.0.2 0.6
    ttable.1.3 0.6
    ttable.0.4 0.5
    ttable.1.4 0.5
    ttable.0.5 0.5
    ttable.1.5 0.5
    pcm.duplex {
    type asym
    playback.pcm "ch51dup" # upmix first
    capture.pcm "hw:0"
    # change default device:
    pcm.!default {
    type plug
    slave {
    pcm "duplex"
    # for aoss
    #pcm.dsp "duplex"
    #pcm.dsp1 "duplex"
    If anyone could hint me in the right direction as to how I could get it to work properly or provide me with a working .asoundrc, I'd appreciate it!
    Last edited by eyescream (2010-02-25 19:30:30)

    eyescream wrote:I can have sound in mpd and mplayer at the same time now
    Good. So file the damned bug report against mpd. Right now would be a good time.
    eyescream wrote:but flash completely blocks sound off for other things.
    See thread. Prove to me that flash/firefox is blocking:
    fuser -v /dev/snd/* /dev/dsp*
    eyescream wrote:The problem now is that mpd only outputs through my front speakers, so it isn't being upmixed anymore.
    Forget about upmixing for the moment, until you've got the ALSA/OSS conflict solved.
    Edit: Use e.g.:
    audio_output {
    type "alsa"
    name "Sound Card"
    options "dev=dmixer"
    device "headphones"
    In /etc/mpd.conf or ~/.mpdconf, where the device string matches an ALSA pcm entry.
    eyescream wrote:What do you mean by not renaming "default" exactly?
    This, of course, from your own ~/.asoundrc
    # change default device:
    pcm.!default {
         type plug
         slave {
        pcm "duplex"
    Comment that section out, for the time being.
    Last edited by brebs (2010-02-25 02:43:54)

  • (Solved) one sound application at a time

    hello,archers! I moved from gnome to Kde(at last) and faced the issue. E.G if amarok plays musik there's no system notifications and smplayer plays no sound t.i only one programm can use alsa at a time. I have latest kde, alsa and gstreamer and xine backends for phonon. alsamixer shows everything's ok. What should  I do? thnx.
    Last edited by off220 (2011-01-15 10:30:01)

    Ok. I've been able to solve the problem by creating /home/user/.asoundrc file with this content
    pcm.softvolPhonon {           
        type softvol             
        slave.pcm "default:CARD=0"
        control {                 
            name "Phonon"         
            card 0               
        min_dB -51.0             
        max_dB 0.0               
        resolution 100           
        hint {                   
            show on               
            description "My Soundcard with extra Volume Control"
    Then I just choose Phonon as the mail output in sound preferences. Solved.

  • [Solved]No sound anymore (ALSA/PulseAudio)

    Ok so I have no idea why I have no sound anymore, I didn't install anything...
    Anyway, that's what I've tried:
    -Check if mixer are all up in alsamixer
    -Try to play a bit with pavucontrol
    -Reboot
    -Rerun pulseaudio with verbose
    -Mute and unmute with physical button (I don't know why but I used to get this problem and it used to be solved just doing this)
    -Googgling and searching this forum
    Here are some more info
    Pulseaudio logs:
    └┼─$─┤▶ pulseaudio -k; pulseaudio -vvvvv
    E: [pulseaudio] main.c: Failed to kill daemon: No such process
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: RealtimeKit worked.
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 5.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
    D: [pulseaudio] main.c: Running on host: Linux x86_64 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
    D: [pulseaudio] main.c: Found 4 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is a3af3988434b49f3b8af2ab66eba685b.
    I: [pulseaudio] main.c: Session ID is c1.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1001/pulse.
    I: [pulseaudio] main.c: Using state directory /home/unkn0wn/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes.tdb'
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes.tdb'
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes'.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry6
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry7
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry8
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry9
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry10
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry11
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry12
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry13
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry14
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry15
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry16
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry17
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry18
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry19
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database.tdb'
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
    D: [pulseaudio] module-udev-detect.c: Ignoring /devices/platform/thinkpad_acpi/sound/card29, because marked so.
    I: [pulseaudio] module-udev-detect.c: Found 1 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-jackdbus-detect.so': success
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus c9a6328a5bfaef44136d134253502922 as :1.32
    D: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
    I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #6; argument: "channels=2").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-policy.so': success
    I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #7; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-discover.so': success
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez5-discover.so': success
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 54d6e91cb1d72b925a540cf453502907 as :1.40
    I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #9; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez4-discover.so': failure
    I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #8; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-esound-protocol-unix.so': success
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #10; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #11; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-gconf.so': success
    I: [pulseaudio] module.c: Loaded "module-gconf" (index: #12; argument: "").
    I: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
    I: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
    I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #13; argument: "").
    I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #14; argument: "").
    D: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
    I: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null: front-left: 99957 / 153%, front-right: 99957 / 153%
    I: [pulseaudio] module-device-restore.c: Restoring mute state for sink auto_null.
    I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: device.description = "Dummy Output"
    I: [pulseaudio] sink.c: device.class = "abstract"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card"
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    I: [pulseaudio] module-device-restore.c: Restoring mute state for source auto_null.monitor.
    I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    D: [null-sink] module-null-sink.c: Thread starting up
    D: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
    I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #16; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
    I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #15; argument: "").
    I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #17; argument: "").
    D: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #18; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-console-kit.so': success
    I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #19; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-systemd-login.so': success
    I: [pulseaudio] client.c: Created 0 "Login Session c1"
    D: [pulseaudio] module-systemd-login.c: Added new session c1
    I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #20; argument: "").
    I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #21; argument: "").
    D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
    D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
    I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #22; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #23; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #24; argument: "").
    D: [pulseaudio] main.c: Got org.PulseAudio1!
    D: [pulseaudio] main.c: Got org.pulseaudio.Server!
    I: [pulseaudio] main.c: Daemon startup complete.
    E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
    I: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle f
    └┼─$─┤▶ loginctl session-status c1
    c1 - unkn0wn (1001)
    Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
    Leader: 1048 (slim)
    Seat: seat0; vc7
    Display: :0.0
    Remote: user root
    Service: slim; type x11; class user
    State: active
    Unit: session-c1.scope
    |-1048 /usr/bin/slim -nodaemon
    |-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
    |-2214 dbus-launch --sh-syntax --exit-with-session
    |-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
    |-2227 tint2
    |-2230 xcompmgr -CfF
    |-2231 volumeicon
    |-2236 conky -q
    |-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
    |-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
    |-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
    |-2259 /usr/lib/gvfs/gvfsd
    |-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
    |-2278 /usr/lib32/skype/skype
    |-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
    |-2322 /usr/lib/xfce4/xfconf/xfconfd
    |-2376 firefox
    |-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
    -I see the mixer going up and down in pavucontrol if I play some music
    └┼─$─┤▶ loginctl session-status c1
    c1 - unkn0wn (1001)
    Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
    Leader: 1048 (slim)
    Seat: seat0; vc7
    Display: :0.0
    Remote: user root
    Service: slim; type x11; class user
    State: active
    Unit: session-c1.scope
    |-1048 /usr/bin/slim -nodaemon
    |-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
    |-2214 dbus-launch --sh-syntax --exit-with-session
    |-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
    |-2227 tint2
    |-2230 xcompmgr -CfF
    |-2231 volumeicon
    |-2236 conky -q
    |-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
    |-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
    |-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
    |-2259 /usr/lib/gvfs/gvfsd
    |-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
    |-2278 /usr/lib32/skype/skype
    |-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
    |-2322 /usr/lib/xfce4/xfconf/xfconfd
    |-2376 firefox
    |-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
    └┼─$─┤▶ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: CX20590 Analog [CX20590 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    └┼─$─┤▶ aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=PCH
    HDA Intel PCH, CX20590 Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    Front speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
    hdmi:CARD=PCH,DEV=1
    HDA Intel PCH, HDMI 1
    HDMI Audio Output
    hdmi:CARD=PCH,DEV=2
    HDA Intel PCH, HDMI 2
    HDMI Audio Output
    Don't really know what else to provide...
    About my setup it's a thinkpad t420 not plugged in any hdmi screen or simething like that
    Thank you
    Last edited by Truc (2014-04-19 13:15:28)

    └┼─$─┤▶ fuser -v /dev/snd/*
    USER PID ACCESS COMMAND
    /dev/snd/controlC0: unkn0wn 2231 F.... volumeicon
    └┼─$─┤▶ speaker-test -c 2 -t wav -D plughw:0,0
    speaker-test 1.0.27.2
    Playback device is plughw:0,0
    Stream parameters are 48000Hz, S16_LE, 2 channels
    WAV file(s)
    Playback open error: -16,Device or resource busy
    It says it's busy but I don't see anything that could use it. I quit skype before trying

  • How to solve no sound in XP on new PCs after reboot. solution

    hello all ..
    how to know Many of us have chosen to install on their computers windows XP
    and I think we all have a problem with sound.
    When we already find correct drivers that make the sound appear,
    there is another problem, after restart, the computer lost the driver.
    and now I write, what to do, that it was not.
    I do not mean to put in the startup file
    that will be at every restart, Restarted UAA BUS DRIVER.
    I mean to be a sound and speaker icon next to the clock without unnecessary processes ..
    to solve the problem and enjoy the sound, you must copy from the computer where is installed Windows Vista SP2 x32 or x64
    the file HDAUDBUS.SYS who find in Windows \ system32 \ DriverStore \ FileRepository \ HDAUDBUS.INF
    then in our system, XP x32 or x64-based open device manager and then open the System device
    and click on "Microsoft UAA Bus Driver" and select Update Driver
    and then point out the place where you keep a file Hdaudbus.sys copied from Vista.
    we do this with both "UAA bus driver" from device manager forced to manually update the driver,
    and after enjoy the sounds and loudspeaker icon after every restart
    vista x32 Hdaudbus.sys--> 548kb for XP x32 sp2/sp3
    vista x64 Hdaudbus.sys--> 927kb for XP x64 sp2
    enjoy  http://www.speedyshare.com/files/23515304/UAA_BUS_DRIVER_z_VISTY.rar

    Hi,
    Witam na forum. Milo ponownie zobaczyc rodaka.
    fingerprint sensor:
    AuthenTec AES1610 Fingerprint Sensor here
    kontroller IEEE1394 zgodny z OHCI:
    IEEE1394 here
    HP integrated Module:
    Bluetooth wireless here
    Zeby byc pewnym ze na pewno dostarcze ci dobre sterowniki audio prosze zeby postapil zgodnia z ponizsza procedura:
     Go to Control Panel -> System -> Hardware -> Devices Manager
    Click with right button of Your mouse on each yellow sign and choose properties. Then go to bottom details and paste here device id. This way we will know what it is.
    Below You've got example how to do it:
    How to get Recovery disk all informations here.
    Links to get Vista recovery disk You may found here.
    Z tym ze z tego co pamietam to niestety jezeli chodzi o Polske to nie zadziala.
    Skontaktuj sie z HP i popros o taka plytke.
    Contact with HP. How to do it all informations here (just choose Your country).
    Jezeli beda jeszcze jakies problemy po prostu pytaj.
    Message Edited by Daniel_Potyrala on 11-01-2009 01:50 PM
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • [Solved] No sound on Dell XPS 13 2015 (9343) with BIOS A03

    I have been unable to get sound to work on my new 2015 Dell XPS 13 Developer Edition running kernel 4.0.1-1-ARCH.  Arch is the only OS installed.
    I have checked the wiki page and this forum post, which seems to indicate it should work with this configuration out of the box.
    However, audio does not play through the speakers (the speakers were working in the original Ubuntu 14.04 installation) and when I tried to un-mute the volume, as described in the ALSA wiki page I received the following message:
    $ amixer sset Master unmute
    amixer: Unable to find simple control 'Master',0
    I am not sure what other pertinent information to post, please forgive my ignorance and let me know. Thank you for your assistance.
    Last edited by lkarunan (2015-05-17 13:42:47)

    I have installed the patched kernel and rebooted twice but am still encountering the same problem. The only difference to altercation's instructions is that the aur package has been updated:
    $ uname -r
    4.0.2-1-xps13-alt
    The output of amixer is identical to before. However, there are now two headphone channels visible in alsamixer, which were not present under the stock kernel.
    ┌─────────────────────── AlsaMixer v1.0.29 ────────────────────────┐
    │ Card: HDA Intel PCH F1: Help │
    │ Chip: Realtek ALC3263 F2: System information │
    │ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
    │ Item: Headphone Mic [dB gain: -16.50, -16Esc: Exit │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
    │ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
    │ ├──┤ ├──┤ ├──┤ └──┘ ├──┤ └──┘ ├──┤ │
    │ │OO│ │OO│ │OO│ │OO│ │OO│ │
    │ └──┘ └──┘ └──┘ └──┘ └──┘ │
    │ 100 100<>100 20<>20 100<>100 100<>100 100<>100 100<>100 │
    │ Master Headphon<Headphon>Headphon Speaker PCM Beep │
    │ │
    │ │
    │
    The channel which is set at 20 gives a continuous "beep" (sine tone?) through headphones, when they are plugged into the jack.
    This is the other sound card visible in alsamixer (and the one that is displayed by default):
    ┌─────────────────────── AlsaMixer v1.0.29 ────────────────────────┐
    │ Card: HDA Intel HDMI F1: Help │
    │ Chip: Intel Broadwell HDMI F2: System information │
    │ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
    │ Item: S/PDIF Esc: Exit │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ ┌───── Sound Card ──────┐ │
    │ │- (default) │ │
    │ │0 HDA Intel HDMI │ │
    │ │1 HDA Intel PCH │ │
    │ │ enter device name...│ │
    │ └───────────────────────┘ │
    │ < S/PDIF >S/PDIF 1 S/PDIF 2 │
    │ │
    │ │
    ─────────────────────── AlsaMixer v1.0.29 ────────────────────────┐
    │ Card: HDA Intel HDMI F1: Help │
    │ Chip: Intel Broadwell HDMI F2: System information │
    │ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
    │ Item: S/PDIF Esc: Exit │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ │
    │ ┌──┐ ┌──┐ ┌──┐ │
    │ │OO│ │OO│ │OO│ │
    │ └──┘ └──┘ └──┘ │
    │ < S/PDIF >S/PDIF 1 S/PDIF 2 │
    │ │
    The only other thing I have noticed in ~20 minutes of use are some graphical artefacts and flickering that occur with this kernel.  I have previously set the Intel graphics acceleration to uxa, as described in the wiki, because of issues with virtual terminals and resuming from suspend. The graphical issues I am currently encountering are very minor, however.
    Update:
    Thanks to fumlead for this post. The problem seems to have been that the wrong card was set as default. Creating /etc/asound.conf and adding this:
    pcm.!default {
    type hw
    card 1
    has solved the problem under both the stock and aur kernels. I am going to stick with the stock kernel because of the graphical issues encountered with the alternate kernel. I am not currently using the audio jack for a microphone, which I believe should work for the alternate kernel but not the stock one.
    There is a small bug with the speakers not automatically being silenced when headphones are plugged in, but hopefully that will be fixed in kernel 4.1.
    Thank you to everyone who viewed and commented in this thread and special thanks to fumlead.
    Last edited by lkarunan (2015-05-17 13:41:23)

Maybe you are looking for

  • ITunes and Windows Vista

    I've just purchased a new computer. It came with Vista Home Premiun OS. When I download iTunes on it -- it works fine until the computer is shut down. When the computer is then started again the DVD/CD driver software cannot be found. The drive won't

  • Can I get a new macbook pro under the warranty?

    Its been two months since I got my macbook pro. I got the newer 2011 version. Less than a month into getting it my keys started falling off and less than 2 months later my hard drive went out for no reason and I had to get it replaced. And now my oth

  • Bin Packing Problem

    Hello all, Can you please help me out a little bit on bin packing problem? I have a jpanel and i want to divide its space in order to put rectangles but having in mind that i have to take advantage of all the empty space provided by the jpanel thnx,

  • System refresh PRD-QUA

    Experts, We have completed the system refresh using PRD system data. part of post processing activity using t-code BDLS and and completed the  Logical system conversion. But still we observed that in BI system still prd system logical system (as belo

  • Line Chart DrillDown Functionality

    Is it possible to do drill down in Line Chart on Date feild?..If any one did before please share with me your experience. or if have any blogs on that do let me know. Thanks in Advance Chi Edited by: chir0n on Feb 3, 2010 11:42 AM