[Solved] radeonsi: only Software Rendering with AMD A10-7850k APU

Hi,
I have a new computer with an AMD A10-7850k APU.
I installed Arch Linux as usual and now get only Software Rendering with the open source drivers.
$ glxinfo | grep vendor
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: X.Org
Xorg.0.log
http://pastebin.com/Pi1rCW5n
dmesg | grep drm
http://pastebin.com/qx7Re1fv
I am in the video group and I have no nomodeset in my boot entry.
Is this APU not yet supported for Hardware Rendering with the radeonsi drivers or do I miss anything?
Thanks in advance for any help!
Last edited by jollafan (2014-09-26 12:53:20)

glxinfo | grep vendor    says very little about software / hardware rendering.
try grepping for renderer or OpenGL
$ glxinfo | grep vendor
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: X.Org
$
$ glxinfo | grep renderer
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
OpenGL renderer string: Gallium 0.4 on AMD RV770
$
$ glxinfo | grep OpenGL
OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD RV770
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.4.0-devel (git-23247e8)
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 10.4.0-devel (git-23247e8)
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 10.4.0-devel (git-23247e8)
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.0
OpenGL ES profile extensions:
$

Similar Messages

  • Msi A88 GX45 with Amd A10 7850k Random Freezes

    i had frezes randomly sometimes one a day sometimes 5 times in 2 hours. it doesnt matter its on heavy load or normal load.
    My Temps Are From Msi COmmand Center ;
    CPU : 40 Degree idle - 50 Degree Max on load.
    Motherboard : 35 Degree on idle - 42-45 Degree on load.
    System Specs ;
    Msi A88 GX45
    AMD A7850k
    Kingston Hyperx Beast 1600 Mhz x 2
    Ati Saphire 5770
    Cooler Master 650W GX series Bronze Psu (Single Rail 52A)
    Samsung 128 gb SSD + 1 Samsung HDD + 1 WD HDD
    Zalman Z3+ Case With 5 Akasa Viper Fans And Akasa Venom Cpu cooler.
    Operating System is Win 8.1
    Before Here What i do ;
    i bought pc 4 weeks Ago first i bought i had Asus a88xm-a motherboard it has freezes too Because i changed my Mobo to Msi Still have Freeze
    i tested memories with memtest and Windows Memory diagnostic tool
    i had 450W PSU i changed it to 650 Cooler Master
    i installed drivers are updated.and Updated bios
    i tried to reinstall Windows 5 times still freezed
    my bios working on factory settings nothing changed.
    i tried to use Memories XMP profile 9-9-9 1.65 V and its Auto Profile 1.5 V and i tried to set 11-11-11 1.5 V Manually nothing changed.
    i tried to replace my graphic adaper and just use my Cpus Gpu nothing changed
    Except of Theese ;
    i find little solution but i didnt like this soluotion :
    When i disable C6 state and amd cool and amd cool and quite feature from bios my computer Works nearly 3 days stable without freezes in this 3 days i just got i BSOD it has _Watchdog_ just 1 time .
    Cos of disabled c6 state i cant use Turbocore and power saving features. my cpu is always working on 3.7 mhz without c6 state and i didnt liked this situation ok maybe it solved my freezing problem but still something is wrong help pls

    Quote from: Nichrome on 07-September-14, 22:47:54
    Hi,
    I think AMD chips has pins on the CPUs not sockets right?(correct if not). Take CPU out and look for bent pins, as if it fails to work properly in 2 different boards then there is something wrong with it. Use magnifying glass and bright light to see any imperfections.
    I concur, if it's doing the same thing on 2 different boards, I would look at the chip as the culprit. I would test my RAM and PSU also.

  • On AMD A10-7850K some randome lines appearing on the section of tabs.

    On AMD A10-7850K + Win7 64bit, some randome lines appearing on the section of tabs. (Looks like a graphical bug)
    Reinstall, new driver... still randomly happened.
    HW accelaration is now set to off and it looks okay now.

    Kedves Tomi55!
    Rendicsek! Hozzá vagyok szokva az angol-nyelvű helpdesk-hez.
    Én is dolgozom, de még így is elég gyors a reakcióidő, köszönöm.
    Szóval... Ha kikapcsolom a HW-es gyorsítást, akkor a probléma megszűnik. Nincs gond a memóriával, nincs gond az APU-val sem. Minden szépen fut rajta, egyedül a böngészőben jelennek meg néha random vonalkák a fölső sorban, ahol a tabok vannak.
    Most per pillanat ki van kapcsolva a HW-es gyorsítás a böngészőben és nincs grafikai hiba. Ha bekapcsolom, majd újraindítom a böngészőt, akkor a hiba azonnal előjön.

  • Upgrade cpu with AMD A10-4600M in HP Pavilion dv7-6101er (lz661ea) FS1 and FS1r2 sockets

    Hello Friends. I owner HP Pavilion dv7-6101er (lz661ea) and i want to upgrade cpu. Current CPU is A6-3410MX and socket FS1 i want replace for AMD A10-4600M socket FS1r2. But i don't shure will new cpu working in my notebook? I asked this question in ADM support, they said what both CPU is compatible, but need software support in bios of specific models of notebooks. I can't ask this question in HP support because free support time of my model is ended. Please prompt - BIOS of my notebook will support a new CPU?
    This question was solved.
    View Solution.

    n00x wrote:
    All of what you wrote - I understand that. But understand and you - the replacement of the processor is required because performance lacking. For a new book i haven't  money. You are employee of HP and really can help asking the question to someone of your colleagues who will know exactly whether to run the new AMD processors in my notebook. All my notebooks have been made HP I always helped the company - buying its products, help you and me now. I'm not asking for much - just a concrete answer - will work or not?
    No!! That is where you are wrong. I am not an HP employee.
    Very few of us here in the forums are HP Employees. Those that are, with very few exceptions, are here volunteering their own time to help owners of HP products. This is a peer to peer forum where owners of HP products share their time and expertise helping others who need help. We are here to help. We are helping  as volunteers.
    There is no concrete answer on this. Sometimes an upgrade to an unsupported CPU will work, but most often it will fail.  Read my previous posts. The risk of whatever currency you use in your country to purchase the new CPU is yours, not mine nor HP's.
    Here is a solid answer for you...Use a CPU that is in the list in the Maintenence & Service Guide and your upgrade success chance will go up dramatically.  I cannot say your upgrade success will be guaranteed because there is always the chance that you may break something during assembly/disassembly or be unaware of a critical assembly/disassembly procedure and inadvertently destroy your new CPU.
    If you want a high performance CPU and chipset in a laptop then choose well when making a laptop purchase. Laptop/notebooks are actually not meant to be upgraded.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Adobe premiere cs6 crash with AMD A8-5600k APU whit Radeon HD

    Hello everyone, I am writing because every time I do a rendering with adobe premiere cs6 me pc crashes, blue screen error, or turns off and ariavvia from nothing ..
    and I noticed that this problem from me especially when laoro with avchd files (. mts) because I tried to do with rendering. avi file and the problem seemed solved
    I have a windows 7 ultimate 8gb ram - AMD A8-5600K APU with Radeon HD graphics
    with 4.30Ghz processor
    Help me thanks in advances! cheap to make!

    That MAY be a hardware error... since video editing stresses all components
    Read Bill Hunt on BSOD http://forums.adobe.com/thread/772169

  • Does the MSI FM2-A55M-E33 work with AMD A10 6800K ?

    So I am trying to build my own pc. I don't want my money to be wasted so asking you will it work ?
    Do I need to update bios for that ?
    I researched about it on the internet. It said that these fm2 boards (except the latest one) do not support richland series.They only support those trinity series. For richland, they need to update their bios. So do I need to do that for this thing? If yes, how do I do that ? Would the system turn on without those bios ? (asking because if it will turn on, then I could update bios from this website. But will it turn on without the bios?) I am totally confused. And also this is my first time building a pc. Please Help     

    On some boards it is possible without (on some it won't even post). The board will then post but show a message about a non supported Richland cpu being used and that an update is required (board will be stuck in such message loop).
    Now one can take a bootable DOS USB stick and put the bios update .exe on it you extracted from this archive: http://www.msi.com/service/download/bios-22557.html
    Then enter the bios, go to save and exit and select your USB stick in the boot override section. The system will now boot from the USB stick and you're able to run the .exe
    Remember: Go to save and exit and at the boot override choose the bootable USB stick. This will exit the bios and the system will boot from the device you selected. Otherwise you will get back to the message loop.
    If the board doesn't post this trick is not possible. Either you need a trinity cpu then to update to a Richland supporting bios or ask MSI/a pc-shop to flash it

  • Problems with AMD A8-6410 APU with ATI AMD Radeon R5 Graphics

    Hi.
    I have problems with the graphics card driver Ati Radeon R5. I have a HP 15 - g012dx , from one moment to another , the driver stopped working. I have to disable this driver for the video work properly. I installed the drivers that brings the HP Recovery Manager:
    * AMD HD Graphisc Driver:
    -version 13.351.1105.1001
    -version 13.351.1105.1005
    Prove also unsuccessfully with these drivers :
    * amd - catalyst- 14.7 - rc3 -windows- aug12
    * amd - catalyst- 15.3beta - 64bit - win8.1 - mar20
    * sp67327
    * sp69615
    PLEASE help me to resolve this problem
    thanks
    DISABLE DRIVER (VIDEO REGULAR)
    ACTIVE DRIVER (VIDEO PROBLEMS)

    Install the driver that is available either by download from the HP support portal download section or the HP Recovery manager. You can access the Recovery Manager while logged into Windows or by booting to the usb recovery media you should have created by now. 
    Try the following HP graphics softpaq version 13.152.1.3000. The HP softpaq will also reinstall the notebook's chipset drivers.
    http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64482.exeversion
    Do not install drivers from AMD.
    If you read the fine print at AMD, you will find that AMD cautions you that it is best to use the notebook manufacturer's drivers.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • X crashes on startup with AMD dual screen setup

    Ever since I bought my AMD Kaveri A10-7850K at the end of January last year I've been having trouble getting a dual screen setup to work properly. Initially I put this down to poor beta drivers, and as I had far too much going on to investigate the issue further beyond some fiddling with xorg.conf, I bought an AMD A4-4000 as a temporary solution while waiting for the Catalyst drivers to catch up.
    In June last year I decided to give my A10-7850K another go, assuming that the Catalyst driver would have matured enough in the meantime to cater for the Kaveri processors. Unfortunately the situation was still the same, and I I didn't have the time nor want to be swapping processors all constantly to I decided to just give up on a dual monitor setup for the time being.
    After many years of using two screens, however, it is very hard to get used to a single monitor again, and as January is a quiet month for me I decided today to have another at getting it to work properly.
    My setup is as follows:
    an LG LG 23EA63V connected via HDMI as my main monitor at 1920x1080
    a Viewsonic VP-171b connected via DVI as my secondary monitor at 1280x1024
    AMD A10-7850K APU
    Catalyst 14.12-1 drivers installed from Vi0l0's repo
    Xorg 1.15 installed from Vi0l0's repo
    KDE 4.14.3 using kwin
    KDM is launched using kdm.service
    KMS disabled via nomodeset
    fglrx module loaded on boot via cat /etc/modules-load.d/catalyst.conf
    Tear free rendering enabled
    After plugging in my secondary monitor configuring it in amdcccle to be to the right of my primary moniotor in multi-display desktop mode, everything works correctly. This even works in my preferred setup where the secondary monitor is rotated into portrait mode, although I currently have not configured rotation so as to not overcomplicate the troubleshooting.
    Upon rebooting, however, X hangs with a static white cursor in the top left hand of both screens, which after a while disappears completely. I then have to unplug the secondary (DVI) monitor and hard reset the PC before I can boot into my desktop again. The bizarre thing is though that when I plug in my secondary monitor again and configure it as desired, either through amdcccle or krandr, everything works perfectly again.
    This is, of course, an incredibly cumbersome way of working, especially when most of the time I forget to disconnect my DVI monitor prior to turning on my PC, hence me just making do with a single monitor for the past 7 months.
    I did a complete fresh install of Catalyst yesterday (uninstall drivers, delete remaining config files, reinstall drivers from repo), to no avail.
    Output from xrandr after rebooting with the secondary monitor disconnected:
    $ xrandr
    Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
    DFP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
    1920x1080 60.00*+ 50.00 59.94 60.00 50.00 59.94
    1776x1000 50.00 59.94 50.00 59.94
    1680x1050 50.00 59.95
    1400x1050 50.00 59.98
    1600x900 50.00 60.00
    1280x1024 50.00 60.02
    1440x900 50.00 59.89
    1280x960 50.00 60.02
    1280x800 50.00 59.81
    1152x864 50.00 59.96
    1280x768 50.00 59.81
    1280x720 60.00 50.00 59.94
    1024x768 50.00 60.00
    1152x648 50.00 59.94
    800x600 50.00 60.32
    720x480 50.00 60.00 59.94
    640x480 50.00 60.00 59.94
    DFP2 disconnected (normal left inverted right x axis y axis)
    CRT1 disconnected (normal left inverted right x axis y axis)
    Output from xrandr after reconnecting the secondary monitor:
    $ xrandr
    Screen 0: minimum 320 x 200, current 3200 x 1080, maximum 16384 x 16384
    DFP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
    1920x1080 60.00*+ 50.00 59.94 60.00 50.00 59.94
    1776x1000 50.00 59.94 50.00 59.94
    1680x1050 50.00 59.95
    1400x1050 50.00 59.98
    1600x900 50.00 60.00
    1280x1024 50.00 60.02
    1440x900 50.00 59.89
    1280x960 50.00 60.02
    1280x800 50.00 59.81
    1152x864 50.00 59.96
    1280x768 50.00 59.81
    1280x720 60.00 50.00 59.94
    1024x768 50.00 60.00
    1152x648 50.00 59.94
    800x600 50.00 60.32
    720x480 50.00 60.00 59.94
    640x480 50.00 60.00 59.94
    DFP2 connected 1280x1024+1920+0 (normal left inverted right x axis y axis) 338mm x 270mm
    1280x1024 60.02*+ 75.02
    1280x960 75.02 60.02
    1152x864 75.00 60.02
    1280x768 75.02 60.02
    1280x720 75.02 60.02
    1024x768 85.00 75.03 70.07 60.00
    800x600 85.06 72.19 75.00 60.32 56.25
    640x480 85.01 75.00 72.81 66.61 59.94
    CRT1 disconnected (normal left inverted right x axis y axis)
    my xorg.conf file:
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-1"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Monitor"
    Identifier "0-DFP1"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Monitor"
    Identifier "0-DFP2"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1280x1024"
    Option "TargetRefresh" "60"
    Option "Position" "1920 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    Option "Monitor-DFP1" "0-DFP1"
    Option "Monitor-DFP2" "0-DFP2"
    BusID "PCI:0:1:0"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-1"
    Driver "fglrx"
    Option "Monitor-DFP1" "0-DFP1"
    BusID "PCI:0:1:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Virtual 3200 3200
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-1"
    Device "aticonfig-Device[0]-1"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    My Xorg.0.log:
    http://pastebin.com/ki5A0T7R
    I'm quite desperate to get this working, almost a year after buying my new setup, so any pointers are welcome!
    Thanks in advance!

    Actually of the above listed commands only xclock is in xorg-apps .
    pacman -S xorg-apps xorg-twm xterm
    is needed.

  • HP Pavilion 15 notebook pc AMD A6-5200 APU with USB Problem

    Hi there,
    I bought a laptop "HP Pavilion 15 notebook pc with AMD A6-5200 APU and product number E8A72UA#ABA with window 8 on it but suddenly something went wrong that I had to formate it.
    But since then, all my USB had stop functioning I could'nt find the driver for the USB. please somebody help me.
    Thanks

    Hi:
    Windows 8 is supposed to have the USB drivers incorporated in its driver database.
    The only suggestion I can offer, would be to install the chipset driver directly from AMD and see if that restores functionality to the USB 3 ports.
    http://support.amd.com/en-us/download/chipset?os=Windows%208%20-%2032

  • Bad CS6 liquify preview with AMD 6950

    I'm try new liquify in Photoshop CS6 and see very bad previews. Here is liquify preview in accelerated Liquify. Note the artifacts.
    Here is unaccelerated preview (Alt pressed pressed at startup). All clean.
    I also tried nVidia videocards. All ok. Problem appears only on workstation with AMD card. I try two drivers 12.4 and 12.2 - same results. OpenCL is on.
    Anybody can help me?

    I have the same problem, my graphics card is the Intel HD4000. I submitted a bug request a week or so ago, has not been acknowledged Likewise OpenCL is on.....
    This is only apparent in Liquify, all other filters and displays are fine. My bug report was "Jaggies in Liquify" makes it difficult if not impossible to work on fine detail
    MK

  • Which Video Card will Work out of Box with P7-1240 Desktop with Win 7-64bit & AMD A10-5700 CPU?

    Hi Folks,
    I'm new here and have already searched for solutions.  I have P7-1240 Desktop purchased new in June 2012 with Jasmine MSI-MS-7778 motherboard, AMD A10-5700 quad core, 10 MB ram and Windows 7 64-bit.  I'm trying to install a graphics board so my son can play some games that he currently must play on low resolution using the integrated graphics.
    I updated my PSU to 600 watt Corsair and tried GTX 750 Ti and GTX-660 cards to no avail (the computer won't boot past HP splash screen).  I've also tried AMD Radeon R7-265 card but couldn't even boot to the HP splash screen.  As I understand, HP offers no BIOS updates for Windows 7 (I read here that one guy loaded a BIOS update for Windows 8 on his Windows 7 machine and it worked, but I am too chicken to try that).
    I just want to put this issue to rest.  So my question is simply this:  Does anybody know of ANY graphics card series that will definitely work OUT-OF-THE-BOX in my machine with the stock BIOS and PCI-Exp 16 Gen 2 slot?  I was going to try a GTX 500-series card next.  But I wanted to get some advice first, since I won't be able to return it if it doesn't work.
    Thank you!
    Gary
    This question was solved.
    View Solution.

    Hi,
    Graphics card compatibility with the BIOS levels in PCs is not the only factor.  PCI-E slot version compatibility both upwards and downwards would be another factor.  Manufacturers will at times view standards differently and hence design their graphics cards to function differently compared to the same card being made by a different manufacturer.  Manufacturers may also design graphics cards to only work with their motherboards.  Bottom line is that not every graphics card will work in every PC.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • [Solved] Hp Laserjet 1536dnf MFP only software

    [EDIT] The issue is solved. My uncle called someone to fix the issue. He deleted one more printer related additional file. Unfortunately I do not have the name. After that he downloaded all-in-one file and succesfully installed printer. Sorry for the trouble.
    Hello,
    My uncle has Win 7, Ultimate, 64 bit (updated to latest windows updates)
    installed via bootcamp on iMac
    Have HP 1536dnf MFP printer installed via USB. No other HP product is installed.
    I had issues which I managed to solve.
    Problems:
    Earlier the 'properties' window flashed and closed immediately. I could not solve the problem even after trying solutions offered in earlier posts. After few install, my installer would fail as it stalled at 99 %. Even if I killed installer via task manager, still I could not find any solution. HP toolbox FX could not be installed.
    As usual, I removed all HP driver enteries from
    services tab,
    device manager and
    somewhere in 'printers and devices' (afte rclicking / selecting any printer, on top bar, ther is an option to select driver).
    I also removed HP folder form 'Programs x86' (my system is 64 bit). In programs folder, I found nothing.
    I also checked for universal printer is uninstalled and
    print sprooler is working and is set on automatic.
    I had also upgraded firmware to latest 2014 version.
    Windows update of 1536dnf always failed.
    I run latest al-in-one installer from HP (210 mb)
    All-in-one installer ...
    With installer windows installer also installs software. I clicked on taskbar icon to see details. It searches for latest drivers of scan, print, etc on net and then installs it.
    After 26-29 % HP installer, searches for 1536 printer driver (it can be seen on windows installer screen). When the installer reaches 29 %, it says
    Installation failed. Messege is something like
    Installation of HP Laserjet 1536dnf failed.
    I kept the installer running. After it reaches 99 %, it hangs. After few minutes, it shows fatal error. I ended installer via talk manager, still software is not installer.
    HP diagnostic tool identifies printer, but says, software is not installed and points downloads page, which is not of HP 1536dnf MFP.
    There is one solution, which I have not tried. One post said to create a new user.
    Half Solution:
    Then I tried basic setup of print and scan driver PCL 6 without first installing software (which is latest available on HP website 2011 version) and ... it worked. Now I can print and he properties tab would open.
    Also note that this is a 'universal Printer driver'--> all were suggesting that universal printer and print spooler causes problems
    Still it's working fine, but without the software I cannot scan. I do not use photoshop.
    Question:
    My question is
    The 210 mb installer will again install drivers. What will happen as in this case, I have already installed drivers and are working fine, but as mentioned, I cannot scan. HP scanning software gives good options.
    Is there version available where only software is installed and no driver is installed.
    Since 210 mb all-in-one installer always hangs at 99 % (downloaded 2 times and installed 7-8 times), should I try basic installer.
    What will happen to preinstalled drivers?
    The problem is that installed driver is a universal printer PCL 6
    I will again visit my uncle on saturday.
    Please help me. Thanks.
    Kind Regards
    White Lotus (WL)
    This question was solved.
    View Solution.

    [EDIT] The issue is solved. My uncle called someone to fix the issue. He deleted one more printer related additional file. Unfortunately I do not have the name. After that he downloaded all-in-one file and succesfully installed printer. Sorry for the trouble.

  • TS3212 Itunes won't open. After installing it, It wont open. It only comes up with an itunes software licence agreement then it disaperes and nothing happends? any sujestion will be greatly apreciated.

    Itunes wont open. After installing it, It wont open. It only comes up with an itunes software licence agreement then it disaperes and nothing happends? any sujestion will be greatly apreciated.

    hi Shaun!
    after installing the update for iTunes, it doesn't run (comp makes noises but nothing comes up on screen). when i open task manager itunes is running as a process, but i can't end process.
    hmmm. okay, Norton is still our prime suspect here. that "running itunes.exe process that will not die" symptom is associated with the nastier versions of the NIS 2005 launch suppression problems. (people who get that also often see things like looooooong sloooooow shutdown times on the PCs and odd end program dialog boxes.)
    let's try throwing the trusty Lorraine M technique at the beast. (it usually fixes the nastier versions of the NIS 2005 problems.)
    Lorraine M: NIS/itunes problem rectified
    love, b

  • HT201442 I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

    I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

    Error 3194:
    This device isn't eligible for the requested build
    It means that Apple has stopped signing the version of iOS that you have, try downloading the latest iOS version, then try Restore again.

  • Premiere Pro CC Crashes While Rendering With Mercury OpenCL

    Hi guys!
    Every time I try to render a ~2 min video in H.264 using the OpenCL renderer which is fully supported on my 7970 (2x Crossfire) the program crashes while rendering. (Usually around 28%)
    If I switch to Mercury Software renderer, it renders perfectly.
    I am currently using AMD 13.6beta2 drivers, and PPCC is fully updated, any suggestions?
    Additionally, for the half minute that it tries to render with OpenCL before crashing, by checking the GPU utilization % in AMD catalyst overdrive, it seems to not be utilizing the gpu at all... And then promtly crashes of course...
    I hope I can fix this problem soon... Really dissapointed with this adobe product.
    Thanks a lot!

    Rendering without any effects ----------> Still Crashes
    Disabling Crossfire ----------------------- > Still Crashes
    Reinstalling Premiere ---------------------> Still Crashes
    Physically Removing the 2nd GPU -----> Works
    So, is there any way I can get this to work while having both GPUs physically installed in the computer?
    It would be quite a hastle to remove the 2nd one each time I need to use PP!
    One odd thing also is that from watching the gpu utilization while rendering H.264 1080p, the GPU is only being used to about 30%, and very intermittently.... I would imagine things would accelerate quite a lot if it actually utilized the whole GPU!
    Thank you very much guys!

Maybe you are looking for

  • How to create Windows 7 Homegroup with Verizon Router

    I have a desktop and a laptop, both running Windows 7 (the desktop is running Windows 7 Home Premium, the laptop  is running Windows Ultimate).  With XP I had a nice network and could share printerhs, files, etc . After I upgraded both machines from

  • Bug in new Itunes U app

    Hello to everyone. I just wanted to report a bug found in the new Itunes U app. I didn't know where else to post it. After looking through Review Lecture 1 slides from "Standford iPad and iPhone App Development" I experience the following problem. As

  • Where the task payload is stored in the dehydration store

    Hi All, I wanted to get the taskPayload from the BPEL dehydration store. I have gone thru the WFTASK table but I didn't see any column which conains the taskpaylod. I need this payload to do the following.. - Get the taskPayload - Modify it so that I

  • Stateful session bean

    I am creating a web application using JSPs and want to keep stateful information from one call to the next.  In the first jsp I run the code: InitialContext ic = new InitialContext(); StatefulTestLocal testbean = ((StatefulTestLocalHome)ic.lookup("ja

  • Material Classification Data extraction fron ECC

    Hello Experts, We are trying to extract material classification data from ECC 6.0 to MDM 7.1 using mdmgx T-Code. We are using the standard SAP list of tables which is uploaded in MDMGX. On performing 'Start Extraction' it gives us the following error