Some 1142n APs not getting PoE

Hi All-
I have deployed 40 1142n Access Points and have them connected to 6509-E switches.
No more than 6 APs per switch and no other PoE devices.
All but 4 have booted and and associated the the controllers. The ones that have not have the folowing in common:
1. Their LEDs cycle through "Red, White, Green"
2. On the switch, the 'show power inline | i gx/x" command gives:
Gix/x auto on 17.3 15.4 Ieee PD 3
Any ideas?

1140 operate at 15.4w.
Make sure CDP is enabled and what IOS is the 1140 loaded with?

Similar Messages

CC clean up tool saying some files did not get cleaned close browser and run again

When I run the clean up tool saying some files did not get removed try closing browser and run again did not have browser open CC will not start spinning progress wheel but never connects

contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Some kde aps not found after update

I just did a massive (1gb) update last night (I know update more often!!)
Most things seem to be fine, except several kde aps aren't found. Konqueror, dolphin and kopete are the ones that don't work so far. I searched the forums but didn't find anything. What's up? I assume it has to do with the new kde-meta-* packages. Anyone know how to fix this?
I checked via pacman and the proper packages seem to be installed..

I should have been a lot more wordy on my last post.
Almost all of the time that you get file no found errors for stuff that's in the PATH is because there's a mix of binaries for different architectures (64 bit and 32 bit in case of Arch). Although, with KDE stuff it would be strange to not get wrong ELF class errors. Did you enable any new repos recently?

Some images are not getting loaded

I am online tutor. And today i got a problem . Images are not getting loaded and also many things are not getting loaded. But when i use internet explorer i don't have that problem . But i don wanna u internet explrer. Can any one help me. And the site with which i am facing problem is tutor.tutorvista.net

Please try the instructions in this article: http://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show
Hope this helps. :)

Some clients do not get software deployment, actions missing after OSD

We have Win7 SP1 x64 rollout going on from XP, a refresh scanario on ConfMgr 2012 SP1 non-CU site server. Our testing phase went fine with 100% success, but just before starting rolling, I approved updates November 2013 - January 2014 and did too
quick test. So there was lot of issues, after that I had to disable those patches during OSD and let them be deployed via Software Center, after OSD.
Still, about 10% clients comes out with missing actions in ConfMgr client, or/and do not get desktop deployment software. We have 2 additional apps comming up to to user profile, so after first logon these 2 apps gets installed. And in 10% this does not
happend.
- bounderies are fine, client location .log is clear.
- usually ccmsetup /install -> reboot -> ccmsetup install with MP paraments solves the problem, but not always. It´s also too slow solution
- I noticed, that in this enviroment, the 3rd scheduled task called "Configuration Manager Maintenance" is missing. I only see Idle and health eval. I had similar case in my lab with R2, and that maintanced task fixed my client with missing in
10 minutes!
- our guys who installs Computers, claim that this behavior is seen more with refresh TS rather than with PXE boot - new machine scannario.
- there are additional role based applications with required deployments, and they do not appear, even if the actions are fixed
Any hints what to do? I would like to avoid upgrading site server to R2 or updating it during active rollout.

Skywalker - I agree, solving Software Updates issues in OSD is a challenge. It´s shooting ducks to figure what KB fix breakes the OSD hook. Recapturing .wim in a middle of a rollout is not the option here, but you´re right. In other side,
if patches breakes OSD during deployment and install software update step, it´s no guarantee the capture will solve your problems. I will check the registery, didn´t know that before. I have my suspesious, that TS might not finnish properly, though there is
no errors. MDT brings lot of more logs and status messages, so solving this isn´t easy.
Torsten - sometimes, waiting for hours, rebooting, killing and restarting prosess isn´t enough. Even if all actions are precent. Also, in a real life users can´t wait for hours. I´m very keen do understand, why there is no 3rd schduled task
of maintance.

Some SC Items not getting transferred to sourcing cockpit

Hi,
Even after the SC is complete, approved and the "sourcing is always carried out" setting is maintained in the config, still some requirements are not transferred to sourcing cockpit.
The sourcing relevant indicator in BBP_PDIGP table is set to blank.
In table CRM_JEST the SC status is approved but the item status is not changing to "Item in transfer process- inactive".
We are now forced to run FM BBP_REQREQ_TRANSFER manually for those SC's to push them to the sourcing worklist of the buyers.
Can someone please say why?
regards,

Hi,
Find Your SC in transaction BBP_PD and check 'organizations' fields (table BBP_PDORG).
There should be list of purchasers. Logon to any purchaser listed in BBP_PD and look at Sourcing.
If You don't find your SC, check following in SPRO:
- SRM Imp. Guide -> Supplier Relat. Managm. -> SRM Server -> Technical Basic Settings -> Define Backend System for Product Category
- SRM Imp. Guide -> Supplier Relat. Managm. -> SRM Server -> Cross-Application Basic Settings -> Define Objects in Backend System (purch. req...)
SRM Imp. Guide -> Supplier Relat. Managm. -> SRM Server -> Sourcing -> Define interactive Sourcing for Product Categories
Regards,
Marcin Gajewski

WLC problem - Some LWAPP APs not working

Dear All,
Our WLC 4402 and 46 1130AG Access points in LWAPP mode have been working flawlesly for the past few years, but suddenly this week some access points have not been working (but the rest are fine). They are correctly registered on the WLC, but if anyone tries to connect they get an authentication failrue and the WLC logs the following. Nothing on the WLC has changed, the only thing that's changed on the network is a new firewall (the WIFI network is one of the subnets) but that shouldn't affect whether users can connect to the WIFI network. Anyone have any clues as to what's going on?
Log System Time Trap
0
Thu Jun 16 10:29:57 2011
Client Deauthenticated: MACAddress:00:1f:c5:f3:84:75 Base Radio MAC:00:1d:e5:4e:95:70 Slot: 0 Reason:Unspecified ReasonCode: 1
1
Thu Jun 16 10:29:14 2011
Client Deauthenticated: MACAddress:5c:59:48:55:74:49 Base Radio MAC:00:1d:e5:4e:93:80 Slot: 0 Reason:Unspecified ReasonCode: 1
2
Thu Jun 16 10:28:54 2011
Client Deauthenticated: MACAddress:5c:59:48:55:74:49 Base Radio MAC:00:1d:e5:4e:93:80 Slot: 0 Reason:Unspecified ReasonCode: 1
3
Thu Jun 16 10:20:59 2011
Decrypt errors occurred for client 04:1e:64:33:2b:d0 using WPA key on 802.11b/g interface of AP 00:1d:e5:4d:f1:f0
4
Thu Jun 16 10:20:36 2011
Client Deauthenticated: MACAddress:d8:9e:3f:aa:ae:18 Base Radio MAC:00:13:5f:f9:a7:10 Slot: 0 Reason:Unspecified ReasonCode: 1
5
Thu Jun 16 10:20:36 2011
Client Deauthenticated: MACAddress:c4:2c:03:3f:92:c0 Base Radio MAC:00:1d:e5:4d:f1:f0 Slot: 0 Reason:Unspecified ReasonCode: 1
6
Thu Jun 16 10:20:36 2011
Client Deauthenticated: MACAddress:b4:07:f9:f3:87:7e Base Radio MAC:00:13:5f:fb:1b:e0 Slot: 0 Reason:Unspecified ReasonCode: 1
7
Thu Jun 16 10:20:36 2011
Client Deauthenticated: MACAddress:90:27:e4:b2:da:b1 Base Radio MAC:00:1d:e5:4e:8a:50 Slot: 0 Reason:Unspecified ReasonCode: 1
8
Thu Jun 16 10:20:36 2011
Client Deauthenticated: MACAddress:88:c6:63:c3:47:92 Base Radio MAC:00:1d:e5:4d:f1:f0 Slot: 0 Reason:Unspecified ReasonCode: 1
9
Thu Jun 16 10:20:36 2011
Client Deauthenticated: MACAddress:7c:c5:37:14:f0:bb Base Radio MAC:00:1d:e5:4e:92:d0 Slot: 0 Reason:Unspecified ReasonCode: 1
10
Thu Jun 16 10:20:36 2011
Client Deauthenticated: MACAddress:78:ca:39:88:c2:a3 Base Radio MAC:00:1d:e5:4e:93:10 Slot: 0 Reason:Unspecified ReasonCode: 1
11
Thu Jun 16 10:20:36 2011
Client Deauthenticated: MACAddress:5c:59:48:55:74:49 Base Radio MAC:00:1d:e5:4d:f1:f0 Slot: 0 Reason:Unspecified ReasonCode: 1

What kind of authentication i being used on SSID that the clients connect to? If RADIUS server is involved, can you verify if it shows any logs pointing to auth failure?
Run a debug client on the controller for one problem client and send it over.

Some electric piano notes get muted

Hi all: hoping you can help resolve an issue with electric pianos that an upgrade from Mainstage 2.2 to Mainstage 3 did not resolve.
If I pound out an 8th-note rhythm on one key with varying intensity (kind of like Supertramp would do with a chord, but just using one note) about 10% of the notes are muted. In a mix it sounds like I missed the note altogether. The MIDI message shows that they're coming through with good velocity (usually between 90 and 120) but they sound as though the the tine was dampened vs. sounded, leaving just a faint kind of tine sound. Why? How do I get rid of it?
Factors:
It happens more frequently if I'm holding down a bass line when hammering away at the note.
Staccato notes seem to make it occur a little more frequently.
I've varied the number of voices between 20 and 88 but this has no effect.
It seems to occur with all EV88 patches.
Thanks for any ideas/help.

I wouldn't think you need to buy Komplete just to get the electric piano instruments from NI. You can get their Wurly/Rhodes/Clav package, called Vintage Keys as a separate item for $150 or you can buy each of those instruments separately for some reduced price that I didn't bother to check.
http://www.native-instruments.com/en/products/komplete/keys/scarbee-vintage-keys /
As for how NI instruments work with MainStage, I have to admit that I don't actually use any at the moment so I couldn't say for sure, but MS just uses normal AU plugins, just like Logic, and I've certainly never had any issue using Komplete instruments in Logic. I wouldn't expect any problems unless you are running Mavericks, which is just too new to be stable for software that hasn't been well-tested with it yet. I do a lot of composition, so justifying the cost of Komplete Ultimate, or whatever it is called these days, was pretty easy. It's a massive cost savings compared to buying individual instruments and fx from NI. I've been using it for years. But if your budget is tight, I'm sure you can get just their 'Mark 1' rhodes package for well less than $100.
I actually use a midi-fied rhodes as one of my mainstage controllers, so when I'm looking for a rhodes sound, I just raise the fader on that audio channel and feed it into an amp sim in MainStage. The same goes for my organ, which is an XK-3C I use as my other controller, which goes into a NeoVentilator and then into MainStage, so I've always got rhodes and B3 on 2 stereo audio channels in MainStage. MainStage provides synths, clavs, a lower organ manual (assigned to the rhodes), amps, and effects - so I can't actually speak to which rhodes plugins sound the best or are least buggy. I hear great things about the VB3 organ plugin from GSi, so perhaps their rhodes plugin is worth looking into as well? http://www.genuinesoundware.com/?a=showproduct&b=27
And for what it is worth, I was under the impression that the EP plugin that comes with Logic/MainStage is actually a physicially modeled instrument rather than a sampled instrument, though I could definitely be wrong on that point.

APs not getting IP addresses on Server 2008r2

Has anyone seen this? We had about 30 APs drop off the network after a controller upgrade and had to be manually assigned an address. We found that the APs are DHCP and have a reservation in the excluded range of the scope. In the new version of DHCP in Server 2008r2, even with a reservation in an excluded range, DHCP will not issue those addresses to clients. Deleting the reservation and letting the AP find a valid address in the range didn't work either.

Where are your APs? Are they directly connected to your 2106, or are they connected to a switch like normal?
Assuming connected to a switch, the WLC config is irrelevant to an AP getting an IP address. Whatever vlan your APs are in, they'll do a broadcast dhcp request and you'll need an ip helper-address or something to get it to your dhcp server..............
So do you see any kind of dhcp request make it to your server?
If this is directly connected APs, then perhaps someone else on the forum can share thier experience with this?
-Wesley Terry

Some Software Updates not getting downloaded

I setup a test Software Update Group and deployed to a Win7 test system. It appears that most of the updates did download and install, but when I run a manual update from Control Panel I see eight updates that haven't been installed. Two of them aren't even
listed in "All Software Updates" on my SCCM 2012 R2 admin console. For SUP setup I have it set to download: Critical, Definition, Security, Service Packs and Updates on a daily basis.
The updates that aren't in the list for All Software Updates are KB2952664 and KB2901983.
Why are these getting skipped?

Hi,
Not all the updates are deployed via WSUS or SUP. With WSUS or SUP implemented, you can still click "Check online for updates from Microsoft Update" for optional updates. For example, you can install windows 7 language pack in this way.
http://windows.microsoft.com/en-in/windows/install-languages-with-windows-update
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM client not getting installed on some system (SCCM 2012 SP1)

Hi,
I am new to SCCM. I deployed sccm client via "client push deployment". Client installed on 90% system , but some system are not getting sccm client install. I restarted WMI service and file sharing on those client.
1:- I check the ccmsetup.log file on one of the system.
<![LOG[File C:\WINDOWS\ccmsetup\{1AF71F68-6089-4211-ADDC-06DF40606141}\client.msi installation succeeded.]LOG]!><time="11:31:28.071-330" date="08-19-2014" component="ccmsetup" context="" type="1"
thread="3440" file="msiutil.cpp:831">
<![LOG[No client language changes are detected per current client.msi.]LOG]!><time="11:31:28.071-330" date="08-19-2014" component="ccmsetup" context="" type="0" thread="3440" file="ccmsetup.cpp:8140">
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="11:31:34.176-330" date="08-19-2014" component="ccmsetup" context="" type="1" thread="3440" file="ccmsetup.cpp:3320">
<![LOG[Sending Fallback Status Point message to 'IN-SCCM.DOMAIN.COM', STATEID='400'.]LOG]!><time="11:31:34.176-330" date="08-19-2014" component="ccmsetup" context="" type="1" thread="3440"
file="ccmsetup.cpp:9421">
<![LOG[Params to send FSP message '5.0.7804.1000 Deployment [MP] IN-SCCM.domain.com']LOG]!><time="11:31:34.176-330" date="08-19-2014" component="ccmsetup" context="" type="0" thread="3440"
file="ccmsetup.cpp:9552">
<![LOG[State message with TopicType 800 and TopicId {87645077-E6A4-4379-A76A-BE17C536F429} has been sent to the FSP]LOG]!><time="11:31:34.300-330" date="08-19-2014" component="FSPStateMessage" context="" type="1"
thread="3440" file="fsputillib.cpp:752">
<![LOG[Deleted file C:\WINDOWS\ccmsetup\ccmsetup.xml]LOG]!><time="11:31:34.300-330" date="08-19-2014" component="ccmsetup" context="" type="1" thread="1888" file="ccmsetup.cpp:9156">
<![LOG[CcmSetup is exiting with return code 0]LOG]!><time="11:31:34.316-330" date="08-19-2014" component="ccmsetup" context="" type="1" thread="1888" file="ccmsetup.cpp:10540">
2:- I checked SMSAdminUI.log ,
[53, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[36, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[56, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[61, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[64, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[49, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[66, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
3:- CcmExec.log:-
<![LOG[*** Keep the system awake]LOG]!><time="11:38:09.505-330" date="08-19-2014" component="CcmExec" context="" type="1" thread="3232" file="powerstatemanager.cpp:1057">
<![LOG[*** System is now free to go to sleep]LOG]!><time="11:38:10.255-330" date="08-19-2014" component="CcmExec" context="" type="1" thread="3232" file="powerstatemanager.cpp:1068">
<![LOG[Could not load logging configuration for component FileSystemFile. Using default values.]LOG]!><time="11:51:53.939-330" date="08-19-2014" component="CcmExec" context="" type="2" thread="1268"
file="stdlogging.cpp:480">
Can anyone suggest , which log file i have to check more.

Hi,
I checked locationservices.log and got the result.
<![LOG[Raising event:
instance of CCM_CcmHttp_Status
   ClientID = "GUID:4B37DF71-4647-424F-8E4F-E011E38F0970";
   DateTime = "20140819060312.831000+000";
   HostName = "IN-SCCM.domain.com";
   HRESULT = "0x00000000";
   ProcessID = 3040;
   StatusCode = 0;
   ThreadID = 1784;
]LOG]!><time="11:33:12.831-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="event.cpp:706">
<![LOG[Persisting the management point authentication information in WMI]LOG]!><time="11:33:12.862-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="lssecurity.cpp:921">
<![LOG[Persisted Management Point Authentication Information locally]LOG]!><time="11:33:12.878-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="lssecurity.cpp:928">
<![LOG[Current AD site of machine is India]LOG]!><time="11:33:12.925-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="lsad.cpp:746">
<![LOG[MPLIST requests are throttled for 00:04:38]LOG]!><time="11:33:13.034-330" date="08-19-2014" component="LocationServices" context="" type="2" thread="3240" file="lssecurity.cpp:4528">
<![LOG[Current AD site of machine is India]LOG]!><time="11:33:13.065-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="lsad.cpp:746">
<![LOG[Updating portal information.]LOG]!><time="11:33:13.190-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="3612" file="lssecurity.cpp:4103">
<![LOG[Updated FSP 'IN-SCCM.domain.com' from AD to local.]LOG]!><time="11:33:13.424-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="lsad.cpp:6155">
<![LOG[Received reply of type PortalCertificateReply]LOG]!><time="11:33:13.752-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="3612" file="replylocationsendpoint.cpp:302">
<![LOG[The reply from location manager contains 1 certificates]LOG]!><time="11:33:13.752-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="3612" file="lsportalutils.cpp:93">
<![LOG[Updating portal certificates]LOG]!><time="11:33:13.752-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="3612" file="lssecurity.cpp:4143">
<![LOG[Successfully created context from the raw certificate.]LOG]!><time="11:33:13.783-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="3612" file="lssecurity.cpp:4247">
<![LOG[Executing Task LSRefreshLocationsTask]LOG]!><time="12:33:10.868-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="428" file="scheduledcleanupendpoint.cpp:116">
and the ClientLocation.log file..
<![LOG[Domain joined client is in Intranet]LOG]!><time="11:32:50.927-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="336" file="lsad.cpp:896">
<![LOG[Rotating assigned management point, new management point [1] is: IN-SCCM.domain.com (7804) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="11:32:51.020-330"
date="08-19-2014" component="ClientLocation" context="" type="1" thread="336" file="lsad.cpp:5909">
<![LOG[Assigned MP changed from <IN-SCCM.domain.com> to <IN-SCCM.domain.com>.]LOG]!><time="11:32:51.020-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="336" file="lsad.cpp:1364">
<![LOG[Rotating assigned management point, new management point [1] is: IN-SCCM.domain.com (7804) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="11:32:51.364-330"
date="08-19-2014" component="ClientLocation" context="" type="1" thread="336" file="lsad.cpp:5909">
<![LOG[Assigned MP changed from <IN-SCCM.domain.com> to <IN-SCCM.domain.com>.]LOG]!><time="11:32:51.379-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="336" file="lsad.cpp:1364">
<![LOG[Current AD forest name is domain.com, domain name is domain.com]LOG]!><time="11:33:09.974-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:818">
<![LOG[Domain joined client is in Intranet]LOG]!><time="11:33:09.974-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:896">
<![LOG[Rotating assigned management point, new management point [1] is: IN-SCCM.domain.com (7804) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="11:33:10.302-330"
date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:5909">
<![LOG[Assigned MP changed from <IN-SCCM.domain.com> to <IN-SCCM.domain.com>.]LOG]!><time="11:33:10.349-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:1364">
<![LOG[Rotating assigned management point, new management point [1] is: IN-SCCM.domain.com (7804) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="11:33:11.332-330"
date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:5909">
<![LOG[Assigned MP changed from <IN-SCCM.domain.com> to <IN-SCCM.domain.com>.]LOG]!><time="11:33:11.363-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:1364">
In ClientLocation.log file.. Assigned MP is changed from <IN-SCCM.domain.com> to <IN-SCCM.domain.com> again and again..
and ClientIDManagerStartup.log contains..
<![LOG[[RegTask] - Client is already registered. Exiting.]LOG]!><time="11:32:47.351-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="regtask.cpp:793">
<![LOG[Evaluated SMBIOS (encoded): ]LOG]!><time="11:32:48.460-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="smbiosident.cpp:184">
<![LOG[SMBIOS unchanged]LOG]!><time="11:32:48.460-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:671">
<![LOG[SID unchanged]LOG]!><time="11:32:48.460-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:688">
<![LOG[HWID unchanged]LOG]!><time="11:32:49.553-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:705">
<![LOG[GetSystemEnclosureChassisInfo: IsFixed=FALSE, IsLaptop=FALSE]LOG]!><time="11:32:49.600-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:215">
<![LOG[Windows To Go requires a minimum operating system of Windows 8]LOG]!><time="11:32:49.678-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="util.cpp:2902">
<![LOG[Computed HardwareID=2:2AF3437D810085AF58274221194EE64E5365F4E2
   Win32_SystemEnclosure.SerialNumber=<empty>
   Win32_SystemEnclosure.SMBIOSAssetTag=<empty>
   Win32_BaseBoard.SerialNumber=BTCR71400LLA
   Win32_BIOS.SerialNumber=
   Win32_NetworkAdapterConfiguration.MACAddress=00:19:D1:78:8A:1D]LOG]!><time="11:32:49.678-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:476">
<![LOG[Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
   HardwareID1=2:2AF3437D810085AF58274221194EE64E5365F4E2
   HardwareID2=3AD70278013A0076]LOG]!><time="11:32:49.678-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:575">
Its showing client is already registered.. but its not showing in SCCM console.
Any idea

Sales orders from CRM are not getting blocked with credit check

Hi All
I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
Thanks in advance for looking into this

Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks.
Orders created via CRM will not have transaction code set (SY-TCODE).

Contact person Rel.ship Data not getting updated in B2B Web User Mngt

Hi CRM Gurus,
Need some help on Web User Management functionality.
Sub: Contact person Relationship data not getting updated when we change the company (to wich contact person belong to) in ISA CRM 5.0 Web User Management.
we are currently on CRM ISA 5.0 and using Web User Managment for our B2B scenario. New creation of users is working fine. But when we want to change the company (Sold to pary) for the existing contact person, the relationship data in CRM is not getting updated and the below are the details.
Contact person No: XXXX (has a Relationship: "Is contac person for YYYY company in CRM)
Company/Sold to Party: YYYY (has a relationship "Has contact person XXXX in CRM).
When I chage the contact person's (XXXX) company from YYYY to ZZZZ,
- Relationships of the new assignment for ZZZZ in CRM not getting updated.
- Old Records in YYYY is not getting deleted (i.e. relationships.
- There is No relationship data appear in XXXX.
Appreciate any inputs on the same.
Thanks,
Rahul >>>

Hi Rahul,
I'd suggest you running a session trace / ABAP debugging to see if some information is not getting passed from the Java stack onto the ABAP stack. An alternate move would be to create a new OSS customer message.
Cheers,
Ashok.

Thread does not get notify

Hello,
I start 10 Threads.
If a thread must wait till recourse are valid then I call wait() method.
If any recourse are valid another synchronized method calls notify() method to wake up the thread.
I have the problem, that some the treads are in wait status and these will never wake up again!
This happens exactly, when I choose for example 10 Threads and 5 recourses, or 8 Threads and 4 resources, etc..
What could be the problem, that some threads do not get notify, even when I use netofyAll() method, the situation is the same!

Most likely problem is that you haven't used synchronized sections properly to manage the flags on which you're waiting.
e.g. notify is being called before wait has done it's thing.

Service is not getting Service ID in OSGI Bundle hence not starting ?

Hi ,
I am getting an unusual issue while deployement of service . I am using following syntax to write :
@Service(value=SomeService.class)
@Component(enabled=true,immediate = true, metatype = true, label = "Some Service")
Its not getting started and not getting service id as well.
Please help.

My OSGI-INF folder is not generating at all in the bundle.
How are you generating the bundle? maven? Is it a new one and never worked or does it stopped working suddenly?
Can you post the whole code?

Some 1142n APs not getting PoE

Similar Messages

Maybe you are looking for