Some computer, three user accounts. Should TM be "on" in each account?

Hello everyone, and happy holidays!
I have an iMac with three user accounts. I'm doing my first full back up with TM, but am not sure if each account's TM setting should be "on." My guess is that if TM does a full back up of everything, that it doesn't make a difference, but I don't want three huge redundant copies.
Any thoughts / advice?
Thanks,
Vincas

Now worries, TM will back up everything regardless of what account you are in. But more to your point, it will not make unnecessary duplicates. The only issue might be that it runs more often than needed if it is set up in every account.
If you are the house geek, set it up in your account.

Similar Messages

  • I have three user accounts on one computer. On only one account when I when I check Help - About fire fox only one user account says apply update and won't apply. The other two work fine.

    One of three user accounts on the same computer appears to not be updating to 8.0.1 correctly. One admin and one none admin user account says it is up-to-date. The other non-admin user account, under Help About Firefox says apply update, but won't.

    As long as you installed MS Office into its default location (the top level /Applications folder) it will be available to all user accounts on the Mac.
    As far as licensing is concerned you only have to enter the license code once, which you should do right after installing MS Office, in the same admin account you installed it from, by opening any one of the MS Office applications.  There is no additional licensing required for additional user accounts on the same Mac.
    Each user account is able to run the Office apps.  The only thing you will have to do is go through an initial setup screen in each user account (but this setup does NOT involve entering any additional license codes).
    You may have problems if you installed MS Office in a particular user account (i.e. NOT in the top level /Applications folder).

  • Firefox has suddenly stopped connecting on one of three user accounts on the same computer. That account still connects with Safari - but not Firefox. A clean-install has not solved the problem. Help?

    Three user accounts on the same computer all link to a single copy of Firefox 3.6.8 - but one of them has suddenly lost its ability to use the program. Firefox opens in that account, but it cannot connect to the Internet. 'Done' appears at the lower left of a blank Firefox page [it's set to load a blank page initially], as though a page had finished downloading ... but Firefox does not actually generate any Internet activityx.
    Previously, the Firefox connection for this account was smooth and reliable. I haven't added, upgraded or downloaded any new programs, nor made any other computer changes in recent weeks or months.
    Puzzlingly - that same account still connects successfully to the Internet via Safari. And the other accounts on the same computer continue to use Firefox with no problem - including a test user-account that I set up today to help troubleshoot the problem. The blockage is restricted solely to Firefox with that one user account.
    Following your Support page instructions, I did a clean-install of Firefox 3.6.8, removing both the existing Firefox 3.6.8 and the Library/Application Support/Firefox folder. Going the extra mile, I checked all accounts to be certain that no Firefox folders remained in any of them - then emptied the Trash and restarted before installing a freshly downloaded 3.6.8. But blimey - the blockage still persists for that one user account.
    Firefox shows no visible cookies that might influence the connection. [It's set to delete all cookies upon closing anyway.] And I see no obvious instructions in Mac's firewall or any software program to refuse access to Firefox. The computer is stand-alone, not networked. And in any case, Firefox works just fine in the two other user accounts.
    Deleting the hobbled user account is not feasible. So what is causing this roadblock? Did I miss a step in the clean-install? How can that account resume using Firefox?
    Thanks in advance for your advice.

    If files already have been downloaded then remove the files in the updates and updates\0 folder.
    You can also delete active-update.xml and possibly updates.xml (stores the update history).
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

  • Checking Computer AND User Account against AD without TLS

    Hi Folks,
    i am working on a customer site with 5500/ACS5.2/AD/WZC. The Customer looks for a good Authentication Scenario but decides against TLS. So we tested PEAP with checking the AD for a valid Computer Account and User Auth. But, if i use a Laptop with no Domain Computer Account but a valid User Account, i  can gain Access. Is it possible that the ACS can check for a valid Computer AND User Account and successes the Client only if both Accounts are available and valid?
    Regards, Michael

    Hi Nicolas, thx for this Hint. I did  today the Host Lookup and "was machin auth" thing, but anyway, my own Laptop
    that is not in the Domain can connect with a Domain User ID to the Network. Any Hint or Trick? I saw on other Discussions you referred to that some Users did an AD Rejoin, what do you think?
    Regards, Michael

  • Sharing itunes with three user accounts?

    On my mac there are three user accounts, and i want to move my itunes library from one user account to another.

    They can be transferred to another iTunes library but not another iTunes account.
    Just copy them.

  • I recently purchased an iMac and used migration assistant to get all files from my emac, but now I have three user accounts.  I only want one (perhaps two) accounts.  I want all my music, photos and word docs from old computer in one user name

    I recently purchased a mac and used a firewire to transfer my files onto my new imac with migration assistant.  Now I have 3 users.  I want one with all my main files (pictures, music, files from my old computer).
    I don't mind having an additional "family" account so my younger daughter can't mess us things, but I can't figure out how to get files from one to the next and then delete the one user name.
    Thanks,

    In order to delete other accounts you must be logged into an admin account. You cannot delete the account into which you are currently logged.
    When you started the new computer you were in the Setup Assistant. You created a new admin account before finishing the setup. You need to log into that account because it is an admin account. You can then delete the account you migrated from the old computer (and any other accounts you don't need or want.)
    Then create a temporary new user account with admin status - name it, Temp. Log out of the current account and log into the new account, Temp. Now delete the initial account you created in Setup Assistant. You now have one account, Temp. Now re-migrate your data from the old computer. When that is completed log into the migrated account, which should be an admin account, and delete the temporary account, Temp.

  • Flawless installation and operation for one of three user accounts

    I have used all the wonderful support offered by this forum (except give up)to get the latest versions of Itunes/QT working on my home computer. I've managed several successful installs (and removals) of Itunes and QT but it only works properly for the primary user account. The other two user accounts (both set up as administrators) I continue to receive the infamous "error #-2095" in QT and the "Itunes encountered a problem" error message when launching Itunes. Any help overcoming this problem would be appreciated.
    Dell Optiplex GX280   Windows XP Pro  

    Well thank you indeed. Along with your advice (disable fast switching)and some advice offered in another thread (remove Microsoft Security Update KB-908531 & KB-921398 and select the C:/ root directory as my next re-install location) my latest versions of Itunes and Quicktime are working just fine under all three users. Can't tell you if either effort on its own would have corrected the problem. I've been messing with this since Christmas so I have been very anxious to try anything suggested. Last clean and reinstall included all of the fixes suggested (above) and found since the last clean and re-install hours earlier. Hang in there guys. Keep trying, you'll get it. Thank you again!
    Dell Optiplex GX280   Windows XP Pro  
    Dell Optiplex GX280   Windows XP Pro  

  • One computer, two user accounts, two libraries - how to share??

    My husband and I each have an account on our Dell computer. We each have an iTunes library and would like to have the two libraries shared with each other. We've put them in the shared documents, shared music folder. We also set our preferences in each of our iTunes accounts the location of the library. My library updated to the shared account, but without any of the music purchased from his account. His library shows no music at all - it won't update to the shared file. When we open the shared music folder - all the music is there. It just doesn't come through to iTunes. Help!!!

    Hi Lou18,
    Welcome to the Apple Discussions
    If you have used iChat to enter two .mac account screen names then you have to view it as one iChat. Whichever settings one of you sets then that will be the settings the other sees.
    However if you mean you have set up two Mac User Accounts on the Mac you will need to check that she is actually opening her Mac user account and has not added her .mac details to your iChat.
    There is a possibility that you are talking about Family Accounts or a email Alias for one .mac account in which case one of you will need to use a different screen name for iChat.
    Now this new Name can be AIM or a trial .mac.com name as these will work after the 60 days is up. It is the Linked .mac accounts that do not work for iChat.
    Links and stuff
    8:01 PM Tuesday; June 19, 2007

  • HP 2050 J510a software won't scan in some Win 7 user accounts

    I am using Windows 7 and the full feature software for Deskjet HP 2050 J510a. PC has 5 user accounts (4 Administrator and 1 Standard). HP Scan works from 2 of the Administrator user accounts. On the other 3 accounts, scanning box opens, but fails when scan command is clicked with following message:'An error occurred while scanning'. When HP Print and Scan Doctor is run from within non-functioning account, it states that scanning has checked out OK: but fault remains. How to fix?

    Welcome to the forums Novacco!
    I saw your post about not being able to scan from 3 Admin. Accounts from your PC. I would like to offer my suggestion that may help you.
    Try these troubleshooting steps on all 3 of the user accounts that are unable to scan: Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection
    Happy Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • With Lion I had 2 user accounts. Why do I have three user accounts after upgrading to Mountain Lion?

    I had consistenlty had a master admin user account for myself under Lion, plus the "Guest" account recommended and created by Lion. After upgrading to Mountain Lion, I now have the same 2 accounts, plus a new one called "Other." Why do I have that? Why was it created? How do I get rid of it if it is not needed?

    I meant to include this info from the System Profile:
    Maybe easier to read:
    Canon MF4400 Series:
      Status:          Idle
      Print Server:          Local
      Driver Version:          1.1.0
      Default:          Yes
      Shared:          Yes
      URI:          usb://Canon/MF4400%20Series?serial=0122F5200302
      PPD:          Canon MF4400 Series
      PPD File Version:          1.1.0
      PostScript Version:          (3010.000) 550
    (3010.000) 651
      CUPS Version:          1.6svn (cups-327)
      Scanning support:          Yes
      Scanning app (bundleID path):          -
      Scanning app version:          -
      Scanner UUID:          00000000-3031-3232-4635-323030333032
      Printer Commands:          none
      CUPS filters:
    capdftopdl:
      Path:          /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl
      Permissions:          rwxr-xr-x
      Fax support:          No
      PDEs:
    BasicSettingsPDE.plugin:
      Sandbox compliant:          Yes

  • Computer vs User Accounts on Windows PC

    Trying to set up iTunes Match but concerned by warning about the computer being associated with e Apple ID. It is a family PC and other users have their own iTunes accounts as Users on the PC. By accepting does this mean they can not use their Apple IDs as different windows users - or even set up iTunes - match for themselves?

    Welcome to the Apple Support Communities
    On their users, they won't be able to use iTunes Match. You can do it only on one account

  • New AppleTV user looking for some advice--multiple user accounts

    Just opened and connected the AppleTV we got for Christmas. "Connected" the ATV to my son's iTunes library, in his user profile, without realizing that I probably should have connected it to my iTunes library in my user profile (same computer) so that I could access my iPhoto library, etc.
    Can we leave the ATV connected to my son's user profile while still accessing my iPhoto library? Doesn't appear so when I clicked on the photos tab in the ATV device. Or is there a way that I can switch the ATV to my user profile?
    Searching the discussion forum and nothing show up immediately.
    Thanks!

    Run the sync setup on the ATV again and set up your computer for syncing. Other libraries can be added for streaming from the Computers section of the settings menu. Those libraries need to be online for the content to be accessible, whereas synced content is present on the ATV hard drive, so the synced library doesn't need to be online except for syncing.

  • How to share libraries, one computer , three itune accounts?

    how do i share my itunes library with my sister and my niece. we share my computer with seperate login. the three accounts are set to share but nothing shows in any of the three libraries.

    See if this helps: iTunes: How to share music between different accounts on a single computer

  • No http after some time in user account

    I have a strange behavior. After a restart (Software Update), I couldn't visit any webpages. Network diagnostics said everything was ok. I could send and receive email. I tried another browser: Same result. I logged into my administrator account: everything worked.
    I could fix that problem by changing my proxies settings from "Using PAC-File" to "manually", but the next time, I wanted to use the internet, same problem.
    So now, I have to toggle the proxies settings a couple of times until the internet works again, after every sleep or restart. My wife even lost the "connection" after working some time in other programs.
    This is very annoying, so help would be appreciated.

    Hello @Polysept,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your monitor turns black after some time in use, and I would be happy to assist you in this matter!
    Since you mentioned that your desktop was overheating, I recommend following the steps in this document on Reducing heat inside the PC to prevent overheating. 
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Can I have both Nano and Shuffle on one computer/same user account?

    I have a Nano that I use daily and also just purchased a Shuffle to take to the gym (I'm a bit paranoid about the Nano getting broken, lost or stolen). I'd like to have some of the same music on both devices. Can I do that? (I've yet to plug in my Shuffle in case one overrides the other.)

    Hi MNRobin,
    Yes you can! I suggest reading Knowledge Base Document #200432. If you want, you can select which songs go on which iPod by Manually adding songs, playlists, podcasts and audiobooks.
    I hope that helps,
    Jon

Maybe you are looking for

  • HP Officejet 8500 Pro A909n-Installed Win 8.1- tried HP Sol Ctr&says "device install not complete"

    I was shocked when I was trying to do my reports yesterday, after upgrading to Win 8.1 and finding the driver for my OJ 8500 WILL NOT WORK in printing off ADOBE which lead to me trying to open the HP Solution Center and it just pops up a box that say

  • Accessing values

    class test{      int value;           public test(int val){           value=val;      public void set(int num){           value=num; test a=new test(1);Thats a small program of mine.Previously,when i first learnt java, i would need to do a.set(newVal

  • Error while using metaContainer facet in ADF Faces EA19

    Hi all, i have some problem with using mataContainer facet. I use it in the next way: <af:document> <f:facet name="metaContainer"> <meta http-equiv="refresh" content="5; URL=../logout.faces" /> </f:facet> </af:document> It works, but there are some e

  • In table  rows , i need to check the date validation of perivous ent'd rows

    Hi All, I'm using adf 11g. I have a table with add and delete button in jsff. In jsff page , i mean table row have one lov column and date column and enterable inputtext fields . Conditions 1.lov value , date column and inputext value should be uniqu

  • ADSUBCON with multiple batches to transfer the material to vendor

    Dear Gurus, I am using ADSUBCON tcode for subcontracting process , my problem is i am not able to transfer material to Vendor or received material ,  from multiple batches. please guide how to incorporate this functionality in ADSUBCON. (same availab