Source reuirement in production oder.

Hi;
I have two materials A and B.
A has a BOM and have material:C in its BOM.
B has a BOM and have material:C in its BOM.
C has a BOM and have material:D it its BOM.
I entered production oder via (Co01) for A and B.
I want to see the requirements of D via form A and B. And I want it to report. How can I do that?
Thanks for youy answers.
Emre

Hi,
As mentioned by other experts you can use pegging to find out the Source reuirement for D from A and B.
Else u can create a simple report using the Tables  STKO (BOM - header) and STPO (BOM - item) to find out the qty of D, but the important thing would be that this would only work if you dont change the qty of BOM for D in the production Orders.
If in case you manually change the quantity of D in production orders then u will have to refrer to RESB table to find out the qty of D.
Regards
Vinod

Similar Messages

  • HELP!  I tunes wouldn't update so I tried to delete and reinstall.  I keep getting a message stating the installation source for this product is not available.  Verify that the source exists and that you can access it.  please help!!

    Help!  Itunes wouldn't update so I tried to delet and reinstall.  I keep getting a message: The instillation source for this product is not available.  Verify that the source exists and that you can access it.  I also get this message:  The feature you are trying to use is on a network resource that is unavailable.  Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below.  Help I have no idea what that means or how to fix it. 

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • The description for Event ID 8306 from source Microsoft-SharePoint Products-SharePoint Foundation cannot be found

    hi,
    can anyone please help me with the following:
    The description for Event ID 8306 from source Microsoft-SharePoint Products-SharePoint Foundation cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
    the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The HTTP service located at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc/actas is too busy.
    The publisher has been disabled and its resource is not avaiable. This usually occurs when the publisher is in the process of being uninstalled or upgraded
    _________________________________________________________ Fahad Khan

    Hi,
    Please try the following steps to troubleshoot your issue:
    1.      
    You can try to re-run SharePoint 2010 products configuration wizard to see any problems that still exist.
    2.      
    Go to IIS and see the status of SecurityTokenServiceApplicationPool service, whether it is stopped or not, restart the pool.
    3.      
    Go to manage web application services, review the status of Security Token Service application , try to restart.
    4.      
    In Central Administration>Security>Configure Service Account>Change the service account for the Security Token Service application to some other managed account.
    5.      
    If the issue persists, try the resolution in this blog:
    http://blogs.msdn.com/b/sowmyancs/archive/2010/07/16/sharepoint-2010-service-applications-bcs-metadata-access-service-are-not-working.aspx
    Let me know the result.
    Xue-Mei Chang

  • Adobe Anchor Service CS4 Error 1612. The installation source for this product is not available.

    Hi,
    I've been trying to install CS4 Design Premium, except that I got this message:
    Adobe Anchor Service CS4
    Error:
    Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access it.
    What is wrong and how do I fix it? I've installed this on my sister's laptop as well, but I've already uninstall it. Could this be the reason why?
    Help appreciated, thanks!

    Contact Adobe Technical Support for CS4 installation issues.
    The problem has nothing to do with the fact that you already installed the same software on your "sister's laptop as well." And although you have already uninstalled it (and hopefully deactivated it as well), please remember that this software is licensed for a single user! You and your sister cannot somehow share the license. 
              - Dov

  • "the installation source for this product is not available" error message

    I was following directions to update to i-tunes 10, and my computer was trying to shut down in order to restart. It froze, and would not turn off, so I turned it off manually, then restarted. I got distracted and did not wonder why i-tunes did not finish installing. Tried to open i-tunes later from the desktop shortcut and it said something about not being installed all the way, so the shortcut was not valid.
    I tried to uninstall all the i-tunes stuff, in order, from my computer to try installing it again, and I cannot uninstall i-tunes!! It gives me this error message; "the installation source for this product is not available" and then gives me a file name to search my computer for, that can't be found. I MISS my i-tunes. Please help! How do I get the old i-tunes version off my computer?

    I tried to uninstall all the i-tunes stuff, in order, from my computer to try installing it again, and I cannot uninstall i-tunes!! It gives me this error message; "the installation source for this product is not available" and then gives me a file name to search my computer for, that can't be found.
    These sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Quit out of CleanUp, restart the PC and try reinstalling iTunes. Does the install go through properly this time?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • Error: -1612 The installation source for this product is not available. Ver

    Hi,
    I am trying installing the FA in SAPB12005A SP01 PL36. and I received this error message:
    Error: -1612 The installation source for this product is not available. Verify that the source exists and that you can access it.
    How can I resolved this?
    Regards,
    IAN

    I am getting the exact same error. How come anyone else did not get it?
    The procedure I followed was :
    Downloaded and installed the "download manager" first.
    Then selected all product updates from BOXI3.1 Enterprise
    It downloaded 58 items. After an inquiry I came to know that you need to install only the latest patch, i.e. Patch 1.7 will include all previous patches. So I was running 1.7 and getting this error constantly, and unable to install it at all.
    I tried downloading it from different places and networks, same error persists.

  • Source system in Production doesnt exists Error RC- 8

    Hello experts!
    We connected a second source system to our 7.0 BW. We transported from development to quality system and everything is fine. Now we want to transport to production and we got RC=8 and the message that our "source system does not exist"
    First we checked our source system. It is ok. we can replicate datasources, load units and currencies. But when we want to transport something what is directly connected to the source system we got everytime a RC=8 because of source system. For sure, we checked our "Conversion of logical source systems names". We checked if the mapping from development to productive is correct many times but we can find no error.
    Is there something I can not see?
    I tried to transport Transformations, DataSource Migration, other things connected to 7.0 and 3.x DataSources. Nothing works. I transported a transformation got a little different error like no rules exist because missing infoobjects in source or target or they are not activated. But target seems to be ok and source also have the fields.
    Also I have searched the previous threads I have got what I have done but for sure some thing I am missing !!
    Any Ideas???
    Best regards,
    Yash

    Thanks Murali for your prompt reply,
    I have manged to do the conversion settings again and now the source system client problem subsides !!!
    But when I import the requests again from QA to PRD it says that some DS cannot be activated due to inconsistency in CRM production system. Actual message is.
    Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
    Mapping between data source 0CRM_SRV_CONTRACT_H and source system PC4CLNT400 is inconsistent
    Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode)
      InfoObject Source System of Preceding Doc. ( 0PRELOGSYS ) is not active, total of 4 inactive InfoObjects
      InfoObject Exchange Rate Date ( 0CRM_EXCDAT ) is not active
      InfoObject Exchange Rate Type ( 0CRM_EXCTYP ) is not active
      InfoObject Quotation GUID ( 0CRM_QUOGUI ) is not active
      InfoObject Source System of Preceding Doc. ( 0PRELOGSYS ) is not active
      InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
      InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
      InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
      InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
    is that due to the DS .. some are in BI 7 cannot be mapped with 3.X  ?
    I will be importing a new request all the way from DEV to QA and Then in PRD as of now to see the inconsistency once again.
    Cheers
    Yash

  • CR 2010 Report using "File System Data" as source fails in production

    Hello, I've recently upgraded my website from VS 2008 with full CR 2008 to VS 2010 using CR 2010 SP1 runtime (x32).  Everything went fine except for one report that uses as a source the "file system data".  It points to a share on a samba drive and it worked great before the upgrade.  After upgrading my development box the report runs fine, but when I deployed it, it fails with the message:
    Failed to load database information. Error in File {report name} {D5D84E7F-54DB-4BCA-B3C3-0A169CDC36D7}.rpt: Failed to load database information.
    I made sure the websiteu2019s Application Pool identity was set to use credentials of a user who has access to the share. 
    The data source has the following properties:
    Database DLL:   crbd_filesystem.dll
    File Mask: .
    Include Empty Directories: False
    Max Number of Subdirectory Levels: -1
    Starting Directory:
    {FreeBSD server name}\{share name}
    This report uses a sub-report which has the same source.  This report works fine from (full) CR 2008 and from the designer inside of VS 2010 works too.  I can run it on my development box (in release and debug modes) which is Windows 7 (x64) using IIS 7. 
    In production, we donu2019t include the runtime in our application deployment, since we run multiple sites and do updates frequently, so we pre-install (one time) the runtime separately on the server.  We installed the CR 2010 SP1 x32 runtime on our test and development boxes which both are Windows 2003 with IIS6 and made sure they are setup to use .Net 4 and have the Application Pool identity setup to have access to the share.  All my other reports which use ODBC work fine.  Just this one report doesnu2019t and Iu2019m at a loss on how to even begin troubleshooting this.
    Is CR 2010 still capable of using u201Cfile system datau201D as a source?  I couldnu2019t find anything on u201Cfile system datau201D with CR 2010.  Though I have seen under Other Sources, it still exist when I created a new report, just to try it out.

    Looks like you've found a bug with the CRVS2010 runtime. I looked for the crbd_filesystem.dll in the CRVS2010 install directory (C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86) and it is there. I then opened up the 32 bit MSI and MSM with the MS Orca utility to see if the file is included and it is not.
    Two things we can do:
    1) Add the crdb_filesystem.dll to your install and make sure it installs to the above directory on the runtime computer
    2) I will created a fix request for the issue, however next fix will be Service Pack 2 (ETA, sometime after October) and I doubt this will make it there. So we'd be looking at SP 3 - if there will be one (ETA would be in 2012).
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Business content data source for  BP Product (De)Authorisations & Terminate

    Hi Experts......
    Good evening!!!..
    I do have one requirement for which im not getting any business content ds. Could you pl help me out in that ?
    My requirement is like below.
    Report is extracting SAP CRM contracts data:
    u2022     This report lists the number (as a numerical count) and the Type of BP Contractual Relationships and the Product Groups (PPRs) they are able to sell under those BP Contractual Relationship Agreements (BPAs).
    u2022     This report should also include (at the usersu2019 discretion) all Terminated BPAs and any de-authorised (Terminated) Product Groups. 
    u2022     The user should be able to decide whether the report includes Terminated BPAs and de-authorised Products ONLY.
    Pre-Requisite     BPA Contract has been accepted (Registered)
    Pre-Requisite     Include only changes to BPA contract (including Terminations and Product Group de-authorisations) which have been accepted (Registered) in CLM/Upside.
    Pre-Requisite     Do Not include changes (including Terminations and Product Group de-authorisations) to BPA which are u2018pendingu2019
    ADDITIONAL DESCRIPTION
    u2022     Channel Partners are called  Business Partners by contract.
    u2022     Some T2 Business Partners have contractual relationships with the company, while some may not; referred to as non-contracted T2u2019s.
    u2022     These Contractual Relationships are regulated in Business Partner Agreements
    u2022     BP Agreements outline the BPu2019s Relationship Type with IBM (e.g. Distributor/Reseller/Solution Provider) as well as the Product Groups (PPRs) that the BP has been authorised to sell under the BP Agreement Terms & Conditions with IBM.
    u2022     The subject of this report is to report on the number (as a numerical count) and the Type of BP Contractual Relationships and the Product Groups (PPRs) the BP is authorised to sell under those BP Contractual Relationship Agreements (BPAs).
    u2022     This report should also include (at the usersu2019 discretion) all Terminated BPAs and any de-authorised (Terminated) Product Groups (PPRs) previously associated with the BPA. 
    u2022     The user should be able to decide whether the report includes Terminated BPAs and de-authorised Products ONLY.
    u2022     A BP can have multiple relationships with Company (e.g. Distributor and Solution Provider).
    u2022     For each of these relationships the BP may have a separate BP Agreement (BPA) with company.
    u2022     Both T1 and T2 BP Agreements are also stored as a system contract in CRM outlining:
    o     The Discounts a BP will get under the corresponding agreement
    u2022     The BP Relationships are also reflected as a SAP Distribution Channel in SAP.
    Waiting for your quick response....
       Thanks in advance.

    Hi,
    I think you need to recheck RFC created for QA system , i guess it contains IP Address of the Dev system . Which is why it leads to Dev system whenever you try to goto source system.
    In case if dev, quality server are in the same server with different client then
    Goto  Transaction SM59,
    Select RFC (Dialog ) and tabpage "Logon security" tick on logon screen
    Hope that helps.
    Regards
    Mr Kapadia
    Assigning points is the way to say thanks in SDN.

  • Transfer Rules for two Source System in Production

    Hi All,
    I have a question.
    I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
    Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
    Thanks is advance.
    Regards,
    Komik Shah

    Hi,
    If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
    In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
    In BW Production, you then then maintain the source system conversion of both source system.
    Thanks.

  • Process steps of Production oder after Order confirmation

    Please provide me the ideal Processes in Discrete after GR
    ie)
    1) Create Pro oder through MRP or Man
    2) Release
    3) Print
    4) GI against Pro Or
    5) Order Confir
    6) Goods Receipt
    After the 6th step, whether to do TECO or Close, Settlement,Mark dele indi ,etc,.. please provide some detail

    Hi,
    We can CLSD the Order without TECO.
    But after CLSD, there will not be any posting and settlement possible.
    If your product is fully delivered then, in my view TECO is not required.
    If you have not completed your Prod. Order then puting TECO you can consider your part Production during settlement.
    For your information, after TECO also, you can load the costs on the Order.
    That's the reason for all the orders generally put TECO, settle, then Close (CLSD).
    Regards,
    Siva

  • I can't uninstall Bonjour from my computer.  It keeps giving me this error message "The installation source for this product is unavailable. Verify that the source exists and that you can access it."

    I have been trying to upgrade to the new iTunes and it wont let me beacuse it cant find the installation source. So I tried to uninstall everything manually, and it wont even let me do that!

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

  • Conversion of planned order to production oder.

    hello friends,
    we are making a project,in that we are facing a small problem.
    we made demand management,and mrp run.after we have go
    gone to md04,there we tried to convert planned order to process order, routing is not selected by production order.but if we go to co01,there production order is created.what are the configurations to be made for conversion of planned order to production order.pl help.
    reward points will be given for the best answer.
    regards
    seshagiri

    Dear Seshagiri,
    Tell me after MRP run,for your Finished product,are you able to see planned orders?
    IF so,copy the planned order number and display it in MD13 or directly in MD04 by double clicking on the planned order number and
    click on display button(Press F7).check whether you are able to see BOM components and Detailed.scheduling tab key assuming in
    MRP control parameter you have given value 2 for scheduling.
    IF present and during conversion are you facing the problem?
    Please clear these doubts.
    Regards
    Mangalraj.S

  • Lost FLA Source file for Production SWF

    Hello-
    I have a small site whereby it is flash-based and I lost the
    source .fla file due to machine crash. Unfortunately, I do not have
    access to anything other than the SWF file that is currently
    running the site. I need to make changes and I am attempting to
    convert it but I only see 3rd-party tools to do this. Is there any
    native CS3 or CS4 functionality to produce source FLA files and if
    so how?
    TIA,
    -Chris

    Hey -
    Thanks for the reply. I figure as much and I am kicking
    myself for letting this happen. Either way, I downloaded and
    purchased Flash Decompiler Trillix and did a convert. However,
    Flash CS4 runs very sluggish when trying to edit it thus making me
    believe I did something wrong.
    I am going to give them a call on Monday (the Trillix folks)
    and see if they might suggest something..
    Thanks again!

  • Use SP_Transaction notification for Production Oder

    Hi all!
    Can i use SP_Transaction notification  for Production Order.
    We have two user A and B is manager of A.
    When A create a production order  but A can not use Release function in order to chage status from Planed to Relase.
    Only B can Release.
    How can use SP_Transaction notification  .
    Thanks!

    Import this code into sp_transaction notifocation:
    If @object_type =N'202'
    begin
    If (@transaction_type = N'A')
    begin
    declare @userBO nvarchar(2)
    set @userBO = (select T0.usersign from OWOR T0 where T0.docentry=@list_of_cols_val_tab_del)
    if @userBO = '1' --code user 'A'
    begin
    update OWOR
    set status = 'R'
    where docentry=@list_of_cols_val_tab_del
    end
    end
    end
    Then user A try to add document, click on add button, sp_transaction notification procedure will be executed, and status document will change to 'Released'

Maybe you are looking for