Source system BW100 does not exist

Hi Guru's
I'm trying to transport the datamart infopack from dev to QA and it's failed due to "Source system BD1_100 does not exist; InfoPackage ZPAK_DVDXOWDKOMSF5YW6F4EDXMXL1 deleted".
I've tried to trnasport datamart as well but still failed what could be the problem?
Regards,
Ramana.

Hi Raman
It simple. If you want load data from QAS to QAS then you need take conversion when transport request importing to QAS. So you need record BWDEV ---> BWQAS in "Transport connection".
IF you want load data from BWDEV to BWQAS then you need BWDEV as source system in QAS and no record in "Transport connection".
http://help.sap.com/saphelp_nw04/helpdata/EN/80/1a616be07211d2acb80000e829fbfe/content.htm

Similar Messages

Source system ECQCLNT320 does not exist in BI Production

Hi,
When i am transporting the BI objects along with the datasources it is giving the following error.
our system Landscape:
BI Dev. & BI Qty Same Box
ECC Dev.
ECC Qty
ECC Prd.
in our landscape BI dev and BI Quality are the same Box, i am transporting BI cube objects along with ECC quality system datasources from BI dev. system. But when we import the cube request the following error is occuring.
Please help me as i am in typical stage.
ERROR: Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Source system ECQCLNT320 does not exist
Can we transport the ECQ datasources from BI dev system where i am using them.
Thanks,
Baswa

Hi,
RC on ECQCLNT320 check the source connection under sourcesystem tab in Rsa1,it might having issue else
Check in the RSA6 (Sourcesystem) wether DataSource is active mode or not ,
Go to Tcode RSDS for Replication of DataSource in BW system .
Regards,
Satya

Transports while importing DS error "Source system QAS does not exit "

Hi Experts,
      For a specific reason we are importing a DS from quality to development.While importing DS in Development side we are getting an error " Source system QAS does not exist".Error message as below:
   Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
   Source system QAS does not exist
   Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
   There is no DataSource with these attributes
   Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
   Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
   Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
   Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
   Start of the after-import method RS_ROUT_AFTER_IMPORT for object type(s) ROUT (Delete Mode)
   Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
   The errors affect the following components:
      BW-WHM (Warehouse Management)
   Post-import methods of change/transport request CXCK900023 completed
        Start of subsequent processing ... 20090306024549
        End of subsequent processing... 20090306024550
   Execute reports for change/transport request: CXCK900023
   Reports for change/transport request CXCK900023 have been executed
        Start of................ 20090306024550
        End of.................. 20090306024550
   Execution of programs after import (XPRA)
   End date and time : 20090306024550
   Ended with return code: ===> 8 <===
Our system sap bi is not new system, we are using from long time.Transports are working while moving dev to quality and quality to prod.
Can any body suggest on this.
Regards
Vinod

Hi vinod kumar,
i hope you need to map source system From QAS to DEV system,
genereally from DEV to QAS configuration will be there, but here request is moving from QAS to DEV so i think this should be configured.
RSA1-> Tools -> conversion of logical system names -> maintain original system and target system name for both BI and ECC systems.
Regards
Daya Sagar

Compiler warning: Source folder "server" does not exist and will be ignored

Hi,
i am using NWDS 7.0 SP16. I have a development component type "J2EE Sever Library", which uses a java component. Everything works fine, except during the build i get a warning "Warning: Source folder "server" does not exist and will be ignored.".
Then i created the folder named "server" manually, but the build finished again with warning, now saying:
"Warning: Source folder "server" exists but is empty and will be ignored."
I created a dummy-file in the directory "server" and now the compilation is fine, no warnings.
I like to get my build free of any warnings, so what's wrong here? I found no documentation to create the folder/file manually.
Any help is appreciated.
Regards,
Thomas

Hi Raman,
I am also getting the same error . i moved my srm transports from DEV to QA and replicated the datasources into BI . and then i moved the BW transports from dev to QA.
when i check the datasource it is pointing to D60 instead of Q60 . when i check the transformations getting the same error :
source system dosen't exist.
can you please let me know how you resolved this issue. your reply will be highly appreciated.
Regards,
Sri

ESRfor PI 7.1) source message idoc does not exist in software componet

Hi ,
When using the sap predelivered integration content in the repository the above error (ESR ( for PI 7.1) error : source message idoc does not exist in software component version id) is coming while opening the message mapping interface. Is it due to some content missing or a sp level mismatch ?
Thanks
Sri

Hi,
I'd say you need to import some other SWCV which has all the IDOC typos you use in your scenario
probably this is a prerequisite for importing your SWCV
I don't think this is related to sp level or anything like that
it's just that SWCV is missing
Regards,
Michal Krawczyk

System Administrator does not Exist

Hi all, for Fresh Installation of 11.5.10.2, I have applied diagnostics patch for IZU_TOP.
I can login as SYSADMIN account, but can not see System Administrator Responsibility.
It shows Assigned in User Management module to SYSADMIN user. I tried to End Date and Assign again,and bounced Apache, but it does not show the responsibility after login.
While starting / stpooing of CM, it gives message :
'Please enter a valid responsibility. The responsibility System Administrator does not exist or is not active. Check that the correct applicaton short name is specified for your responsibility'.
Please help..
Rohit

Thanks for your inputs, issue got resolution after below actionplan suggested in SR.
RESEARCH
=========
(Note: This is INTERNAL ONLY research. No action should be taken by the customer on this information.
This is research only, and may NOT be applicable to your specific situation.)
Note 335487.1 Patch 3480000 Error: Responsibility System Administrator
Does Not Exist
Note 309009.1 FND.H Patch 3262159 FNDLIBR fails with "Please enter a
valid responsibility" error
Note 316959.1
ACTION PLAN
============
As detailed in note 316959.1 please do the following:
SELECT *
FROM Fnd_Responsibility_vl
WHERE Application_Id = 1
AND Responsibility_Name = 'System Administrator'
AND Start_Date <= Sysdate
AND ( End_Date is NULL OR End_Date > Sysdate );
2.-
SELECT count(*)
FROM Fnd_User_Resp_Groups;
3.- Back up the wf_role_hierarchies table into a new table you create.
Delete the entries in that table (2 rows exist)
Run affurgol.sql FORCE
Then replace those entries back into wf_role_hierarchies table
The steps to execute are:
3.a.
SQL> CREATE TABLE wf_role_hierarchies_copy AS
SELECT * FROM wf_role_hierarchies;
3.b.
SQL> TRUNCATE TABLE applsys.wf_role_hierarchies;
3.c.
SQL> @affurgol.sql FORCE
3.d.
SQL> INSERT INTO wf_role_hierarchies
SELECT * FROM wf_role_hierarchies_copy;
4.- Provide the output of the following SQL statement at this point:
SELECT count(*)
FROM Fnd_User_Resp_Groups;

Source configuration EHHSS_INC_REC_OIF_ADD_FINTR_LST does not exist

When i try to deep copy EHHSS_INC_REC_OIF_V3 component in EHSM. It gives error "Source configuration EHHSS_INC_REC_OIF_ADD_FINTR_LST does not exist".
Secondly, how to create custom tabs in EHSM screen.
Could anyone please help me regarding this.

Hi Malar,
you have those missing Java classes in a Java DC and want to use that?
In that case: create a public part with purpose compilation ("API"), add an appropriate entity (select the right Java package and choose "Add to public part" from the context menu or add a "Java Package" or "Java Package Tree" entity manually). Add a build-time dependency from your WD DC to that public part of the Java DC. That should take care of the build issue.
The question then is: How do you want to provide the Java classes at runtime? Put them into the Web Dynpro application (create an assembly public part for the Java DC and also add a build-time dependency), put them into a reusable J2EE Server Library (Create a separate DC for that, create the assembly public part for the Java DC, add a library reference from your WD DC to the Library DC), ...
Regards,
Marc

Error System "Item does not exist. It may have been deleted by another user"

Error System "Item does not exist. It may have been deleted by another user" in sharepoint 2010
This is problem show when User new item in List . User open new item page about 3 pages and User save each one page when page save complete , User will save another page.
Sometime User can not save item , it show that error
This List not have workflow and code
Please let me know what is the issue ?

Hi,
Greetings. THis is a known issue and see the links for resolution
http://support.microsoft.com/kb/972225
http://social.technet.microsoft.com/Forums/office/en-US/638e4aa0-527c-4b20-a899-a0cf181983ec/no-item-exists-at-it-may-have-been-deleted-or-renamed-by-another-user?forum=sharepointadminlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm

PS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Analy...viceApplication:
   NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
    + FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
   wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it works

PS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Analy...viceApplication:
   NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
    + FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
   wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it works

EXP-00011: SYSTEM.EMP does not exist

Hi,
I've created two tables emp and org respectively in DB by using system user. I can run select query to see the contents of the table but when I try to export these tables it is displaying an error EXP-00011: SYSTEM.EMP does not exist.
These tables are present in the db.
Following export command is being run :
exp USERID=system/password123 TABLES=(system.emp) FILE=C:\backup_tab.dmp
Could anyone please suggest what is causing the error and how can I resolve this.
Cheers,
Mandy

Hi Mandy,
I think you created your table with double-qoutes, such as
create table "emp" ....if this is so, Oracle needs again for the export these double-qoutes, you made the table name case sensitive. There are two solutions:
1. create your table without the double-qoutes
2. Make a so called parameter file maybe called emp.par. In this file you put the line:
tables=\"emp\"
Save the file. Now you can make the export with:
exp USERID=system/password123 parfile=emp.par FILE=C:\backup_tab.dmpYou can also include "FILE=C:\backup_tab.dmp" in the parameter file if you like. Then you can easier maintain your settings for the export.
Hopes this helps
Herald ten Dam
htendam.wordpress.com

Issue with TTE - External System ID does not exist!

Hi dear Gurus,
We followed the SAP Best Practice to set up our CRM 5.0 system and it seems to have opened the Pandora's box for us. When we try to create a service contract, there was an error message in the header complaining that the external system does not exist. Here is what the HELP tells us:
In Customizing for TTE,
1. Choose Assign Objects from External Systems
2. Choose External System IDs
3. Maintain system ID for the calling system BC5CLNT005
4. Choose Save
However, when we get into IMG, under 'Assign Objects from External Systems', there is NO external system ID to choose. Why is this? Is it because our system is on a different patch level?
Any idea would be appreciated.
Thanks,
Leon

I have similar problem how did you solve this issue?
Your input will help me analyze the issue?
Is it because of the client we where in to is the Productive client not the customizing client?

Source system BIDCLNT600 / ECCDEV210 does not exist

Hi all,
While transporting the BI dev transports to BI prod ,
I am facing the subjected error saying "
Source system ECCDEV210 does not exist
Source system BIDCLNT600 does not exist
Regards
Venkat

Hi,
I maintained the settings in BI Prod like:
Original Source System : ECCDEV210 (R/3 Dev)
Target Source System : ECCPRD400 (R/3 Prod)
But I am facing the other problems like:
1. Field ERDAT will not be delivered from DataSource 0WBS_ELEMT_ATTR in source system ECCPRD400
2. DataSource 0WBS_ELEMT_TEXT does not exist in source system ECCPRD400 of version A
3. Mapping between data source 0WBS_ELEMT_TEXT and source system ECCPRD400 is inconsistent
4. Reference to transfer structure 0BILBLK_DL_TEXT_BB not available. No activation possible.
5. Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
6. Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Delete Mode)
Like these so many repetitions in each area.
For the information:
1. I opened the R/3 prod system , activate the data sources (standard using RSA5) and replicated into the BI prod system.
So,whatever I activated in R/3 prod are available in BI prod after replication. After that I send the transport request. But I have not transported any request from R/3 Dev system to R/3 Prod system with the data sources.
2. I created the transport request based on Info cubes. First, In data flow before option and next request with " In data flow after " option and collection mode is " automatically"
Pl advice me.
Regards
Venkat

Transport Error: Source system does not exist. Message no. RSAR203

Hi,
after transporting from BI_DEVELOP to BI_TEST I get an error whil importing Datasources:
Source system ERP_DEVELOP_SOURCESYSTEM does not exist - Message no. RSAR203
Which is upon the first sight correct, because I got the followings systems, RFC's and BI Sourcesystem:
ERP_DEVELOP -> BI_DEVELOP with RFC & Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_DEVELOP
ERP_TEST -> BI_TEST with RFC & Sourcesystem ERP_TEST_SOURCESYSETM pointing to ERP_TEST
Can I map in the transport ( and how) in a way that the transports do not fail ?
ERP_DEVELOP_SOURCESYSTEM to ERP_TEST_SOURCESYSETM
or
Do I need to setup in BI_TEST a Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_TEST ?
Thank You
Martin
Edited by: Martin Sautter on Jul 25, 2011 12:59 PM

Hi Martin,
You have to maintain the transport connection between your ERP_DEVELOP and ERP_TEST
your transport path should be as below
BI_DEVELOP -
> BI_TEST
ERP_DEVELOP -
> ERP_TEST
1)Make sure you have FRC connection between BI_DEVELOP and ERP_DEVELOP, BI_TEST and ERP_TEST
2)check you have transport connection between BI_DEVELOP and BI_TEST,ERP_DEVELOP and ERP_TEST
Now you transports should not fail
Hope this helps
Regards,
Venkatesh

Source System Does Not Exist - Transport Problem

Hi
We have the next Landscape in BW 7.0 (Netweaver 2004's)
LRDCLNT300     is R3 DEV
LRQCLNT700     is R3 QA
LBDCLNT100     is BW DEV
LBQCLNT700     is BW QA
The connections are
LBDCLNT100 (BW Dev) use as source system        LRDCLNT300 (R3 Dev)
LBQCLNT700 (BW QA) use as source system        LRQCLNT700 (R3 QA)
In RSA1->TOOLS -> Conversion of Logical System Names
In Conversion of source system after the transport we have these entries
Source System                    Target System
LBDCLNT100 (BW Dev)         LBQCLNT700 (BW QA)
LRDCLNT300 (R3   Dev)         LRQCLNT700 (BW QA)
But when we transport an order from BW DEV to BW QA show the error "source system LRDCLNT300 does not exist"
Never made the conversion of source system after the transport.
Can you help us please.

Thanks Edwin
     I create a RFC for LRDCLNT300 (R3 Dev) in my BW QA system (Target System).
I try an order again but it didn't work, also I try to check 7.0 checkbox but I got the message "No entry exists for original source system LBDCLNT100 for 3.x object"
and I have to uncheck again.
I still have the same problem the objects are associated to R3 Dev, never make the conversion to R3 QA.

Source system does not exist (RSAR203)

Hi to all
I have a error in phase XPRA_EXECUTION in BI_CONT 704 add-on upgrade by SAINT transaction.
Start of the after-import method RS_DTPD_AFTER_IMPORT for object type(s) DTPD (Modo de entrega)
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Errors occurred during post-handling RS_AFTER_IMPORT_D for DSFO L
The errors affect the following components:
BW-WHM (Warehouse Management)
I read the thread
XPRA_EXECUTION error in BI_CONT 703 patching
but don't work for me.
The sap Note 1271454 does not work for me becouse I already aply the SP.
SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
SAP_BASIS     701     0007     SAPKB70107     SAP Basis Component
PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
SAP_BW     701     0007     SAPKW70107     SAP Business Warehouse
BI_CONT     703     0003     SAPKIBIIP3     Business Intelligence Content
I upgrede add-on BI_CONT to 704 SP 08, for this the SAINT aply patch SAPKIBIIO4 TO SAPKIBIIO9 (prerrequisite)
The error appear in SAPKIBIIP6
Any suggestions?
Many thanks and best regards
William Neira

Hi,
Had you checked the SAP Note " Note 955647 - BI_CONT 703:Information on Add-On Support Packages".
Seems like SAP has released two support pack
SAPKIBIIP6..........AOP      24.07.2007
SAPKIBIIP6 updated..AOP      07.08.2007........955647
and recommends to apply the Support pack released on 07.08.2007. Kindly check and update.
Regards
Valavan.SM

Source system BW100 does not exist

Similar Messages

Maybe you are looking for