SPA525G permanent CLIR for one line

Hello,
how is it possible for one line (not for all) to set up a permanent suppression of the Caller ID. I can not find it in the settings. I can find only the suppression of all line.
Who can help me?
regards
Daniel

Hi,
thanks for the reply. Does not seem to work. In the PBX (AVM FritzBox) , I can not suppress the phone number for this line. If I use the code *31# or #31# on the SPA525, it tells me unknown number. On ISDN or DECT terminal it works. Note If the unknown number from the SPA525 or the PBX?
Sorry for the bad English!
greeting

Similar Messages

How do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that,

how do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that, then it needs to "fly-out-bottom" again, I can do that, but not on the same line of text...any ideas...

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

One PR for one line item in third party sales

Hi all,
When we create and save a third pary sales order, the system will create a Purchase Requesition.
If there are 5 line items in the Sales Order, the system will create only one PR for all the line items.
I will create only one sales order, and I want one PR for one line item of the sales order.
How to Configure this.
Regards
VASU

Vasu,
PR in the sales order is generated by the settings in Schedule line and Item category. In a particular sales order, if there are 5 line items and of same item category and schedule line then system will give only one PR number. Again if the item category ans schedule line is different then there will be multiple PRs.
Can you please elaborate more on your requirement. Again from one PR you can generate multiple PO
Thanks,
Raja

How to trigger Condition Access sequence multiple times for one line item?

Hi,
We have a situation that, User will enter a Promo code (custom Field) in Sales order Header Additional data B tab to apply discount for line items.
Logic goes like this:
1. For each Promo code .. there may be multiple sale deals (Max 3 at this point).
2. For each line item (refering to tkomp table) we have to apply the sale deals (found above) the Condition access sequence will pick the right sale deal to apply the line item.
3.we have enhanced the tkomp structure to hold the sale deal.
Challenge:
As we have the standard logic to trigger the condition access sequence once for each line item, how we can apply 3 sale deals for single line item. Is there any logic or way to trigger the condition access sequence multiple times for single line item with diffrent sale deals. ~ There may be one valid sale deal for one line.
Functional team maintained diffrent access tables in the access sequence!!!
Fnds, please help me to get some clue
Thanks,
Sunil Y

Hi Eduardo , Thanks for the response.
I am trying to explain again, this is the requirment given by the functional guys.
we have Promo code in Hearder Addtional data B tab --> Have to retrieve Sale Deals -->
At this point of time we may have at max 3 Sale Deals. we don't know which sale deal is vallied for which item we have in TKOMP. We have enhanced the TKOMP structure to hold one sale deal only (ZZPROMO).
We have enhanced USEREXIT_PRICING_PREPARE_TKOMP in RV60AFZZ to populate the value in TKOMP. Then it will go for diffrent access sequence to find the proper condition.
Our challenge is that, for each line item we have 3 sale deals, we don't know which one is valid for which line. but we have to apply the vallied sale Deal to the line items. Line item 10 may have Sale Deal 2 , item 20 may have Sale Deal3 and 30 may have sale deal 1.
We may have solution, by fixing some thing in the code or through config. But i am confused that is it a valid requirment?
Please help me ...
Thanks,
Sunil Y

Title/text effects just for one line?

Hi!
As far as I understood do the PE11 title/text effects work just for one line of text.
(1) How can I produce more lines text-effects with PE11 (and more complex, like 3D-animations)?
(2) If this is not possible, do you know any free/beginners software for doing that?
I look forward to reading your answers!
Best wishes,
Ronald

Ronald,
You are most welcome.
I am not sure what the limitation to one line of text is related to - the program coding? The animation algorithms? However, with a bit of planning, there are several ways around that limitation, but it throws people, when they first encounter it.
This article also has some tips on using Titler in Premiere (both Pro and Elements), and I have added some Adobe TV tutorials. Note: they are done in PrPro, so the interfaces will look differently, plus PrPro's Titler has some additional functions, that are not yet in PrE. Still, the basics are all the same, and I think that with a bit of interpolation, even the PrPro tutorials will be useful: http://forums.adobe.com/thread/1131177
Good luck, and happy titling,
Hunt

SD / Third Party Sales / 2 line items in PR for one line item in Sales orde

Hi
In a third party scenario, I have item category TAS .When I create a sales order, there are 2 Schedule lines for the item. The first SL has confirmed qnty as 0 and the second SL has confirmed qnty as full quantity ( say50). When I save the sales order, it creates a PR as expected. However the PR has 2 line items for this single line item of SO. Each PR line items have the same quantity, in this case 50. Why is this happening. Is it due to some configuration.
All my SD configurations are fine for third party process. Please let me know if somebody faced this situation and solved it.
In crux, one line item in third party process leads to 2line items in PR , each with the quantity as mentioned in teh confirmed schedule line.

Yes interesting to see multiple scheudle lines during TAS processing.
Also please check the scehdule line category. Should be CS. Also check the MRP type in your material.
CS should have Order Type = NB , Item category = 5, Acct Assign Category = 5, incompletion = 31. Rest all fields should be blank or unchecked.
Pur Requisition will be based on the scehdule lines. Since there are 2 schedule lines, you have two line items in the purchase requisition. If you can fix the multiple schedule lines problem in your order, then your requisition looks good.
Please check note 210417 reg av chk for TAS.
Regards
Sai

Multiple account assignment category for one line item in PO

Dear Experts,
We are on SRM 5.0 ECS
One line item of a PO has multiple account assignment category with the cost distribution for
1. Cost Center - 50%
2. Order - 50%
Is it possible?
As per my understanding one line item in a PO can have only one account assignment category
Regards
Mick

Hi,
Yes it is possible by Po line item.
Just go to transaction bbp_poc through the web interface.
Select your PO
Select your line item PO.
goto the account assignment tab (item overview)
you get a cost distribution field in percentage
then you get a cost distribution button : click it and you get several lines where now you can split your 100% in as many lines as you want.
BR,
Disha.
Pls reward points for useful answers.

JTextfield background color for one line

Hi everybody,
How can I change the backgroundcolor for one single line in a textfield? I think it's nog possible in an ordinary JTextfield, does anybody know how I can do this?
Best regards,
Jethro

Look at Highlighter

Difference in amount in sales order and billing for one line item

Hi experts,
User created one sales order with three line items say line item10, line item20
Line item 30.Line item 10 value is 5024.26 EUR in sales order. He did delivery for three line item and invoiced. But the problem is that the line item 10 value is changed i.e. 5024.28 EUR in Billing and the remaining line item values are correct. All the line items having same item category.
I asked the user to cancel the invoice and PGI. He did that. And again he created the PGI and Invoice. But the value of line item 10 become 5024.27 EUR and again he cancels the invoice and the PGI. and again he created the PGI and Invoice. Now the value of line item 10 is correct i.e. 5024.26EUR in invoice.
Note: No changes are carried out from sales order to billing and even in material also.
I checked copy control settings also all are correct.

Is the Item Category of that item different from the rest. If yes for that item probably pricing is redetermined. However if its the same somebody might have changed it manually.
If all the item have same category then it is possible that repricing is carried out for all the items however it found new condition record only for that perticular item.
Rings a bell ?
Regars

Amount Difference in sales order and billing for one line item

Hi experts,
User created one sales order with three line items say line item10, line item20
Line item 30.Line item 10 value is 5024.26 EUR in sales order. He did delivery for three line item and invoiced. But the problem is that the line item 10 value is changed i.e. 5024.28 EUR in Billing and the remaining line item values are correct. All the line items having same item category.
I asked the user to cancel the invoice and PGI. He did that. And again he created the PGI and Invoice. But the value of line item 10 become 5024.27 EUR and again he cancels the invoice and the PGI. and again he created the PGI and Invoice. Now the value of line item 10 is correct i.e. 5024.26EUR in invoice.
Note: No changes are carried out from sales order to billing and even in material also.
I checked copy control settings also all are correct.

Hi
I think this is standard SAP issue of rounding the condition records at item level. Can you please share the netvalue for all the three items and the header net value at sales order and invoice level.
kind regards
sandeep

Multiple Account Assignment at the time of Good Receipt for one line item

Sap Members.
We have some contracts with cost center distributions that the exact amount is not known. These Blanket Orders require a receiving confirmation.then only we can conclude the cost center, If we create one line item with total amount of contract to one cost center, is there a way can we distribute this cost to the different cost centers at the moment receiving the goods
Any help will be highly appreciated.
Thanks
Nick

Please Check SAP Notes - Oss Notes
With multiple acct. assignment, enter GR non-val. or cancel GR
Message no. 06417
Diagnosis
In the case of PO items assigned to more than one account, instead of valuation being carried out at the time of goods receipt, the relevant materials are not valuated until the invoice data is entered into the system.
Procedure
     Set the indicator for non-valuated goods receipts
or
     Cancel the GR indicator.
OSS-Notes.                              -
Version: 5        -
Validity: valid since 12.04.2007
Note 204252 - Valuated goods receipt for multiple account assignment
Summary
Symptom
You cannot use the valuated goods receipt function in combination with multiple account assignment.
Other terms
EKPO-WEUNB, screen 0113, ME21, purchase order, 06417, 06 417
Reason and Prerequisites
We have not implemented this function since users who post goods receipts would have to determine the distribution to individual account assignment items during partial deliveries. Generally, users cannot or should not determine this.
An automatic distribution also causes problems and is also not implemented due to technical reasons

OH rate not transported for one line

Hi Friends,
I changed the overhead rate in costing sheet, in client C001 and TR is created , now I moved that TR to C002 client and ran the program RKAZUTR1, after running when I checked the OH rates for all the lines it is there in C002 except one line, and I did not receive any message while running RKAZUTR1 it shows the result successfully completed.
What may be the reason, what should I do?
Regards
Ashu

Hi Ashu,
Along with the note suggested by Christian also check note number 104017.
The extract of the note 104017 is as under:
Symptom
Case 2: the transport is terminated without errors - however, the overhead rates are not imported.
Solution
Case 2: Post-processing the transport of the overhead rates automatically, which is running during the import, fails. This case occurs if automatic post-processing of the transport of a client-specific table is executed in another client than the import client.
Read the respective warning message in the transport log. You will also be asked in the transport log to carry out post-processing manually in the client into which you imported the overhead rates. To do this, execute Report RKAZUTR1 using Transaction SE38 and enter the transport request number.
The report executes the import of the overhead rates. If this post-processing was finished successfully, then the overhead rates that have been transported can now be found in the target client. You need not repeat the transport of overhead rates although the warning message remains unchanged in the transport log for technical reasons.
If you do not use automatic recording, the transport of deletions requires that you include an existing overhead rate in the transport request first. If you delete this overhead rate afterwards and save it, the deletion is taken into account during transport.
Hope this helps you.
Regards,
Sameer

Cash Discount Calculated for One Line Item and not for Other

Hi All,
We have devloped a Z program which is used to Write of InterCompany AR and AP recon Account to another GL Account. In this program to clear line item we have created a BDC which calls t-code FB05. Thsi program is running perfectly fine for all company codes.
There is new company code SG20 for which it is not clearing the line items. It has created a Session in SM35, when we analysed the seesin we found that for some line items system is calculating Cash Discount and for some other line items it is not but the payment Term is same for all the douments with 3% 14days.
I need your help in understanding that why for some line items system calculates the Cash Discout where as for others it is not calculation..also the Posting Date is same for all the documents.
Please advise what could be the reson for this.
Thanks!
Regards,
VIvek Srivastava

Hi
Cash discount is calculated based on the combination of baseline date and payment term conditions.
Hence please check the baseline date for all the documents, in which the cash discount is not appearing.
In your case, the possible reasons could be that 1) baseline date is different between these documents or 2) payment terms cash % is manually modified in the line item of the documents.
Regards

Different value in sales order and billing document for one line item

Hi Experts,
User created a sales order with three line items say line item 10, line item 20, line30 and he did the delivery and billing also. Line item 10 value is 5024.26 EUR in Sales order
At the time of billing the value of a line item 10 is increased by 0.02 i.e. 5024.28
I asked the user cancel that invoice and the post goods issue. He cancelled the invoice and post goods issue. Then he created the PGI and billing now the value of line item decrease by 0.01(5024.27) again he cancelled the invoice and post goods issue. he created the post goods issue and billing. Now the value is correct i.e. 5024.26.
User is asking me the reason can any one help me in this
Note: price is copying from delivery to billing

Morning Sunina
Now consider this scenario
Item a - 10
Item b - 20
Item c - 30
and the validity of condition rec for item C is 31st of Jan
after 31st JAN the record changes or there isn't any.
In Copy control the pricing type is 'B' i.e., carry out new pricing.
Now if the document is created in January it will take all the above prices. and this document is then billed in Feb. Now the copycontrol, whilst copying the prices, will predetermine the same.
Now your task is to check if there was user intervention, check the pricing in order and check what condition types got affected in order and in billing.
If your scenario is still not amongst the above cases...
I don't know what to do, if you figure out please let us also know, god know when we would face the same scenario....
Take care

Won't show usage for one line

I recently added my brother's phone to my plan, he had Verizon already and we transferred his number to my plan from another person's plan. He's been on my plan since Aug. 2nd, and he's the 4th phone line on my plan now. He isn't being responsible by telling me what his most frequently called numbers are so I may add them to my 10 F&F. I tried to view his top numbers dialed in the usage section, and his number doesn't show up. It only shows me usage for the original 3 lines. I am able to view his calls and details under the billing section, but I have no way of knowing which numbers are most at risk for going over, it won't tell me which of his numbers have VZW or not. He's completely on my plan now, so why wouldn't it show me his heavy hitters? His usage is higher than the other three lines put together, so I need to be able to monitor his usage frquently to ensure no overages. And by the way, I do NOT want him authorized on my account, so hopefully the answer will not be having him call in and access my account to update something... Thanks in advance!

I was getting ready to reply...and saw the issue has resolved itself.
For others who may be reading, and logging in later doesn't work....you can sort the columns when you are viewing the bill online by clicking on the column header. Sort by number, sort by length of call, etc - not ideal but if the Verizon report features are not working, it will give you the information you seek.
if you are good with Excel, you can download the data to a spreadsheet and do your calculations and manipulations there as well.

SPA525G permanent CLIR for one line

Similar Messages

Maybe you are looking for