Space Issue vs. Recording time.

I am trying to record meetings that last 1-4 hours. I have a 500Gb of extra space but when I record the audio it says that I only have 70 min of recording time.
Are there any settings within Logic Pro 7 that I can change to allow me more recording time? Any help is appreciated.
I am new to logic Pro 7.

You don't say what bit rate or sampling freq you will be using. Nevermind the space on the arrange, you might want to consider recording in a format that won't split the files after a given size. I know wavs over 4GB will start having integrity issues due to the size of header of the file. Check RF64 format. its industry standard. Not sure if logic supports it though.

Similar Messages

  • Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time

    Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time technical people and top managers promised that this issue will be resolve tomorrow and they will cal me. Nothing happend!! I can not even cancel my service not just to upgrade it. Completely locked. 
    Any advice?
    Thanks.
    Alex.

    Cannot figure out what your talking about since it makes no sense.
    If you are the account owner you can go to the My Verizon web portal http://www.verizonwireless.com
    You must log in with your cell number and your my Verizon portal password. Not the account pin.
    Once there you can change your plan and services. However repeated incorrect login attempts will lock you out of the site. It a fraud prevention measure.
    1-800-922-0204 call support with your cell number and or account number and account pin and they can assist you.
    If you don't have the information then there is nothing they can do.
    If you can verify who you are they may be able to reset your account access. But only if you are the account owner.
    Good Luck

  • Hard disk free space and 192Khz/24bit time recording limit...

    Hello, when I try to record a long stuff at high sampling rate... 96Khz or 192Khz - 24bit , the max time that I have is 65 minutes whit the metronome set at 20 bpm, the max recording time limit is not active, and the space of the hard disk is of 900 GB... but I have only 65 minute of recording time... is a big problem when I need to record classical stuff or a Live.
    --- for 12 channels at 192Khz/24bit in 1 hour of recording time the hard disk space needed is aprox 3,9 Gb... how is possible that LP 7.2.1 limit my recording time ???---- if I go down to 48 Khz I have the time of 248 Minutes of recording... ----

    Hello, when I try to record a long stuff at high
    sampling rate... 96Khz or 192Khz - 24bit , the max
    time that I have is 65 minutes with the metronome set
    at 20 bpm.
    Try setting the metronome higer, say 30 or 40.
    There may be a quirk in that the lowest metronome settings don't always give you the most time.
    Failing that, try another application. Do you by any chance
    have the OEM version of Cubase LE or Mackie's Tracktion?
    Both of those will get you more time at 96khz/24.
    (Seems that both of those applications come as freebies with a lot of different hardware)
    You can record the tracks in one app then import them into Logic.
    Pancenter

  • How much recording time on my iphone 4 voice memo?

    How much recording time on iphone4 voice memo?

    I would suggest that it depends on how much free space you have on the phone. I have done voice memos of over an hour before, and have read of other users reporting larger ones. I do not believe there is any documented source of what size you can do.

  • Issues in Production time : Urgent

    Hi Folks Can anybody help me in figuring out these issues on real time scenario...
    1) How to handle if the one system is down for long time when other subsequent systems are up and getting the data. ( The scenario  is  that we are sending   data to 3  different  Receiver and  one Source ) we cannot  stop the source  and cannot  resend the data to  the  down  system  because  we will loose  the sequential  order..
    2)  Message Missing though it is Successful in Sxmb_Moni and in Adapter Communication Channel
    500 Internal server error we have to find Manually and apply the SAP notes. Increase the Queue, Fine Tuning the Performance, increasing the Session of the Particular Adapter
    3) If it is Huge Load, the Message content  tab   does not  appears  ..If that is the case how to handle the situation
    4) 100000 + records how to handle it. SAP XI takes 4 hours to deliver to third party system has to send the data in 30 minutes...with help
    5)  How to make  a counter value  for  group  of  messages  handled  by  particular  Interface.  for  example  though the  messages  are chunked to  several blocks  we  need  continuity for  the counter
    6) Trace for JDBC adapter
    7) To debug in Visual Admin

    1) How to handle if the one system is down for long time when other subsequent systems are up and getting the data. ( The scenario is that we are sending data to 3 different Receiver and one Source ) we cannot stop the source and cannot resend the data to the down system because we will loose the sequential order..
    for the system down XI makes the 3 attempts to resend the data to that system and the frequecy for eachtime is maintained in the paramter in SXMB_ADM...you can increase the parameter value so that XI tries to resend that many times before throwing the errror in SXMB_MONI...if still system is not up then once it is up you have to restart the messages in order....
    2) Message Missing though it is Successful in Sxmb_Moni and in Adapter Communication Channel
    Message missing ( if it sucesfull in SXMB_MONI and CC then you should recive the messgae in the target of the CC, it cannot say sucessfull  and then dnt deliver...
    500 Internal server error we have to find Manually and apply the SAP notes. Increase the Queue, Fine Tuning the Performance, increasing the Session of the Particular Adapter
    this delends on the interface flow( data) depneidng up on how system is performing you might end up doing the fine tuning......
    3) If it is Huge Load, the Message content tab does not appears ..If that is the case how to handle the situation:
    there is no alternative to this,,,if the payload is huge the MM tab takes some time to show the data only thing you can finetune to XI server ( check blogs on this)
    4) 100000 + records how to handle it. SAP XI takes 4 hours to deliver to third party system has to send the data in 30 minutes...with help
    100000 + records this is a huge number,,,,but should not take 4 hrs to process..if it is there is something wrong with the system...you have to do the finetuning and find out y it is taking more time.....
    ideally you can break this 100000 record into 10 files each containing 10000 records and process,,,,,use any file splitting program and call it in OS command in file adatper
    5) How to make a counter value for group of messages handled by particular Interface. for example though the messages are chunked to several blocks we need continuity for the counter.
    Need more info
    6) Trace for JDBC adapter : adapter monitoring details are not sufficent?

  • Record time not showing in approval tab for user

    Hello Gurus,
         It a very strange kind of issue. As you can see in the screenshot , the first approval has approved the PO and then ideally it should go to the second approver and it happening but while checking in the portal we can't see the record time in the portal , Also user has to approve the PO several times which is making the user unhappy . So how to remove this bug . While more to add we are working on ACW with custom BADI's (copied of standard with addition condition). Can anyone tell me why its happening.
    Thanks
    Gaurav Gautam

    Hello Gurus,
         Any idea on this.. Konstantin Anikeev , Laurent Burtaire 
    Thanks
    Gaurav Gautam

  • Does imovie have a limit on recording time?

    I plan on recording a seminar from an external camera directly into iMovie.  Is there a maximum recording time?

    No time limit.
    But you'll need a lot of hard drive space to hold the file. And if something goes wrong you won't have anything unless you also record to the camera.

  • Can you set recording time video in Ipad mini?

    When recording videos in my Ipad, they always stop after 2:30min. I wonder how to change the video recording time?

    From another user....
    Two paths -
    One - use an alternative recording app (eg FILMiC Pro) that allows you to record at a lower frame rate and/or smaller image size. (Don't know if it supports iPad 2 on iOS4)
    Two - get an iPad with a larger storage capacity. If you need more space than what a 64GB model gives you, combine it with option 1. (FILMiC Pro is supported on an iPad3 running iOS 6)

  • Spaces Issues

    I was reading through the posts tonight looking for a hopeful solution to my answer, but it's not happening! I use spaces ALL the time. Yes, I have the Microsoft word annoyance, but I've learned that when you have all spaces on the screen at the same time, you can drag from one space to another. Took a long time to learn that one! Anyway, tonight I was using itunes and spaces stopped working. I have mine set up that when I hit the center button on my mouse, all the windows appear on the screen. Using itunes however, it wasn't happening. I'm not sure if it's an itunes or spaces issue, but since I opened itunes, my center button to activate spaces no longer works, but the key commands do. I need it to work with my mouse again. Any suggestions would be greatly appreciated! Thank you!
    Oh, by the way. I have since quit itunes and the center button to activate spaces still does not work!

    It is the one thing in Leopard that is going to cause me to lose my mind. I tried Spaces but really do not find that it is helpful to me. Thus, I turned it off. Now when I work in with multiple apps (let's say Mail and Firefox) an app window - let's say Mail - will suddenly disappear and no amount of clicking or restarting the app will bring it back The only thing I can do is turn Spaces back on and - VOILA- the Mail window re-appears. This is incredibly annoying. It is forcing me to keep Spaces on even though I hate it.

  • ESS Record time's "Copy Previous Week" functionality not working

    Hi,
    we are on 04s sp10. We are trying to modify the ESS Record time DC. In this DC, the "Copy Previous Week" button is invisible and we want this functionality to work. When I made that button visible, for some reason it doesnot copy the times from the previous week. So was wondering if I have to configure something in the backend to make this functionality work. Did anybody come across this issue?
    Thanks

    Any guesses on this one?

  • HP Stream 13 - Disk Space Issue

    I've had this laptop for about 2 months now. I just decided I wanted to take advantage of the one year subscription of Office 365. However, every time I try to download it it says that the disk is full. I don't have ANY files on this laptop nor do I have that many apps. I do have skype, itunes, and a few other things downloaded but that is about it. I don't know what else I'm supposed to do considering I already don't have much on here. I'm not even able to view pictures on my Dropbox  because of the space issue or even use skype at times because "the disk is full".

    Hi @Michelle_le,
    Welcome to the HP Forums!
    It is a terrific place to find answers and  information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    You stated you have the Stream 13 notebook but did not provide the exact model.
    How Do I Find My Model Number or Product Number?
    I understand that when you tried to advantage of the one year subscription to Office  365 you received the message that the disk was full.
    If you openThis PC  how much free space is showing on the drive?
    When you are trying to download the software where is it saving the file?
    If this has not helped, as it is only 2 months old, I suggest contacting HP support for assistance.  They can remotely access your system to help determine and overcome difficulties.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Hard drive space issues

    I have some hard drive space issues.
    At present I only have about 13GB remaining on my 40GB hard drive, which is not necessarily an issue except that I have almost nothing installed/saved on my machine. I have 1 CD ripped to iTunes, no photos in the iPhoto library. I did a quick look with Disk Inventory X and found that the "Printer" folder is 3.2GB - can I get rid of some/all of that as I don't intend to print from the machine?
    What is filling my disk? As far as I can tell the OS should only take up around 3 GB so where did the other 24GB go? Where, oh where?

    Yes, you can delete printer drivers you don't use. OS X takes up far more than 3 GBs. A pretty minimal installation is nearly 7 GBs. Your computer also may have came with pre-bundled software applications (not standard OS X applications.) OS X will also use potentially 10 GBs of space on a temporary basis for temporary files, log files, and cache files. So for a 40 GB drive it's not too surprising to have only 13 GBs free. Perhaps it's time for you to put in a larger hard drive. You can purchase hard drives at:
    MacSales.com
    Buy.com
    NewEgg.com
    The Mini uses a notebook drive. If you have a pre-2006 (Intel) model it uses an ATA drive. After that year they use SATA drives.

  • Colour space issues

    Hi,
    I'm trying to figure out what's going on with colour spaces once I export a video. I've made a video from srgb jpegs and everything looks fine in Premiere Elements, but as soon as I export it as a video (have trived several formats) the colours are dulled and the contrast reduced (a common colour space issue).
    Does anyone know why this happens and if so how to avoid it?
    Specifically in this case I'm exporting photos from Photoshop Lightroom to srgb jpegs which I then import to Premiere Elements 7. The original pictures as well as the jpegs look fine. The jpegs and the movie also looks fine inside Premiere, but as soon as I export it to an avi or quicktime file I get something like a 15% decrease of both contrast and saturation.

    One problem exporting to Quicktime from Premiere Elements has been discussed in the past, and it was found that PE does not correctly write atom data to the MOV header, so that when you play back the MOV file, it plays back in Apples color space on a PC, giving it a washed out look. The only computer where they will look correct is on an Apple computer. I've exported to Quicktime in other applications, and the results come out correctly when played on a PC.
    And then, media players can make the video look too dark or too light, depending on which video renderer is used. In some video applications you have an option to select from 4 different types of video rendering for previewing playback. Some make the video look perfect while others make the video have less contrast. Then you may think that your video or images don't look right, and you start making color corrections.
    On my computer Premiere Elements doesn't use the overlay mode, which is the mode that most closely resembles playback on my TV when the DVD player has black levels turned off. When editing in Premiere Elements, highlights look blown out. At one time I would compensate by changing the contrast and brightness. But after burning a DVD and playing it back on TV through the DVD player or in Windows Media Player, the video was too dark.
    I've learned not to mess with the color too much in Premiere Elements. Not everyone will be able to play back your video and see it the way you intended.

  • CAT2 - Access to record time on setting conditions?

    Hi Experts,
    Can anyone suggest a solution for the below scenario.
    We have two different users having access to enter time entry in CAT2 transaction.
    User 1: Have to enter his time entry only to his personnel no. in CAT2 transaction. He should not post time entry for other
                 personnel no.
    User 2: He is the time administrator, who records time entry for (sub_contractors) several personnel no. in CAT2 transaction. In
                 this case the sub_contractors does not have access to this transaction.
    I used CVR & PER parameter to default DATA ENTRY PROFILE & PERSONNEL NO. for the individual employee. However the system is not restricting the user to access other personnel no.
    Please help me to solve this issue.
    Regards,
    Shadeesh.G

    Can anyone solve the above issue.............
    Regards,
    Shadeesh.G

  • How much video record time do I have on iphone6

    how much video record time do I have on iPhone 6

    Your basic limitation is how much free storage space is left on the phone (found in Settings / General / Usage). How much time does each GB equate to depends on how you are shooting. The i6 shoots at 30 fps by default but can be set to do so at 60 fps. Plus you can shoot at regular speed or slow motion. Unfortunately, Apple does not publish exact specs on the device manual, so you'll have to do some test shots and see how much they take and extrapolate from that.
    BTW, the iPhone 6/6+ manual is found here (or you can download it for free in the iBooks app)

Maybe you are looking for