SPAM stuck on Import_Proper
Reason: TP_STEP_FAILURE
Return Code:8
Error Message: OCS package ALL, tp step "N", return code 0008
SAP release: 620
OS: OS400
SAP Kernel: 640
Patch level: 201
I am trying to update SPAM/SAINT from patch level 21 to 26 using KD70026.SAR.
Right now I have a red light in the SPAM status and a transport waiting for something to happen.
I am not sure of what to do next. I am hoping I can get some help on this one. Thanks,
Ryan
SLOG:
START CMDIMPORT CRP L 20080519164037
STOP CMDIMPORT CRP L 20080519164047
START imp all CRP 20080519164057
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT CRP H 20080519164058
STOP DD IMPORT CRP H 20080519164136
START DD ACTIVATION CRP A 20080519164138
START tp_getprots CRP J 20080519164139
STOP tp_getprots CRP J 20080519164306
STOP DD ACTIVATION CRP A 20080519164306
START DISTRIBUTION OF DD-O CRP S 20080519164306
START tp_getprots CRP S 20080519164307
STOP tp_getprots CRP S 20080519164317
STOP DISTRIBUTION OF DD-O CRP S 20080519164317
INFO TBATG CONVERSION OF CRP N not needed
START MOVE NAMETABS CRP 6 20080519164318
START tp_getprots CRP P 20080519164318
START imp all CRP 20080519165939
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF CRP N not needed
START tp_getprots CRP P 20080519165940
START imp all CRP 20080519170205
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF CRP N not needed
START tp_getprots CRP P 20080519170206
START imp all CRP 20080520085438
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF CRP N not needed
START tp_getprots CRP P 20080520085440
START imp all CRP 20080520095230
INFO: event SAP_IMPORT_START triggered successfully
START SET STOPMARK CRP 20080520095231
INFO: Buffer saved as /usr/sap/trans/buffer/CRPSAV.
STOP SET STOPMARK CRP 20080520095232
INFO TBATG CONVERSION OF CRP N not needed
START tp_getprots CRP P 20080520095232
START REMOVE STOPMARK CRP 20080520101041
STOP REMOVE STOPMARK CRP 20080520101041
START imp all CRP 20080520102134
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF CRP N not needed
START tp_getprots CRP P 20080520102135
START imp single CRP 20080520102213
INFO TBATG CONVERSION OF CRP N not needed
START tp_getprots CRP P 20080520102214
START CMDIMPORT CRP L 20080520110411
STOP CMDIMPORT CRP L 20080520110425
START imp all CRP 20080520110433
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT CRP H 20080520110434
STOP DD IMPORT CRP H 20080520110508
START DD ACTIVATION CRP A 20080520110509
START tp_getprots CRP J 20080520110510
STOP tp_getprots CRP J 20080520110626
STOP DD ACTIVATION CRP A 20080520110626
START DISTRIBUTION OF DD-O CRP S 20080520110626
START tp_getprots CRP S 20080520110627
ERROR ALL CRP S 0008 20080520110634
STOP tp_getprots CRP S 20080520110637
STOP DISTRIBUTION OF DD-O CRP S 20080520110637
ERROR: stopping on error 8 during DISTRIBUTION OF DD-OBJECTS
STOP imp all CRP 0008 20080520110637
START imp all CRP 20080520112719
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O CRP S 20080520112720
START tp_getprots CRP S 20080520112721
STOP tp_getprots CRP S 20080520112727
STOP DISTRIBUTION OF DD-O CRP S 20080520112727
START TBATG CONVERSION OF CRP N 20080520112728
START tp_getprots CRP N 20080520112736
ERROR ALL CRP N 0008 20080520113541
STOP tp_getprots CRP N 20080520113543
STOP TBATG CONVERSION OF CRP N 20080520113543
ERROR: stopping on error 8 during TBATG CONVERSION OF DD-OBJECTS
STOP imp all CRP 0008 20080520113543
START imp all CRP 20080520150718
INFO: event SAP_IMPORT_START triggered successfully
START SET STOPMARK CRP 20080520150720
INFO: Buffer saved as /usr/sap/trans/buffer/CRPSAV.
STOP SET STOPMARK CRP 20080520150720
START DISTRIBUTION OF DD-O CRP S 20080520150721
START tp_getprots CRP S 20080520150721
STOP tp_getprots CRP S 20080520150725
STOP DISTRIBUTION OF DD-O CRP S 20080520150725
START TBATG CONVERSION OF CRP N 20080520150725
START tp_getprots CRP N 20080520150726
STOP tp_getprots CRP N 20080520150736
STOP TBATG CONVERSION OF CRP N 20080520150736
START tp_getprots CRP P 20080520150736
START imp all CRP 20080520150851
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O CRP S 20080520150852
START tp_getprots CRP S 20080520150853
STOP tp_getprots CRP S 20080520150854
STOP DISTRIBUTION OF DD-O CRP S 20080520150854
START TBATG CONVERSION OF CRP N 20080520150855
START tp_getprots CRP N 20080520150859
ERROR ALL CRP N 0008 20080520151702
STOP tp_getprots CRP N 20080520151707
STOP TBATG CONVERSION OF CRP N 20080520151707
ERROR: stopping on error 8 during TBATG CONVERSION OF DD-OBJECTS
STOP imp all CRP 0008 20080520151707
START REMOVE STOPMARK CRP 20080520152128
STOP REMOVE STOPMARK CRP 20080520152128
ALOG:
ALL CRP.ALL t 0000 20080519164024
SAPKD70026 CRP.ALL m 0000 20080519164033 SAPUSER
SAPKD70026 CRP.ALL L 0004 20080519164047 SAPUSER
SAPKD70026 CRP.ALL P 0000 20080519164053 SAPUSER
SAPKD70026 CRP.ALL H 0004 20080519164135 SAPUSER
SAPKD70026 CRP.ALL A 0004 20080519164304 SAPUSER
ALL CRP.ALL t 0000 20080519165935
ALL CRP.ALL t 0000 20080519170203
ALL CRP.ALL t 0000 20080520085432
ALL CRP.ALL a 0000 20080520095231
ALL CRP.ALL d 0000 20080520101041
ALL CRP.ALL t 0000 20080520101156
ALL CRP.ALL t 0000 20080520101339
ALL CRP.ALL t 0000 20080520101435
SAPKD70021 CRP.ALL m 0000 20080520101548 SAPUSER
ALL CRP.ALL t 0000 20080520101943
ALL CRP.ALL t 0000 20080520102132
ALL CRP.ALL t 0000 20080520104653
ALL CRP.ALL t 0000 20080520110359
SAPKD70026 CRP.ALL m 0000 20080520110407 SAPUSER
SAPKD70026 CRP.ALL L 0004 20080520110424 SAPUSER
SAPKD70026 CRP.ALL P 0000 20080520110431 SAPUSER
SAPKD70026 CRP.ALL H 0004 20080520110508 SAPUSER
SAPKD70026 CRP.ALL A 0004 20080520110620 SAPUSER
ALL CRP.ALL S 0008 20080520110634
ALL CRP.ALL t 0000 20080520112716
ALL CRP.ALL S 0000 20080520112725
ALL CRP.ALL N 0008 20080520113541
ALL CRP.ALL a 0000 20080520150720
ALL CRP.ALL S 0000 20080520150724
ALL CRP.ALL N 0000 20080520150735
ALL CRP.ALL t 0000 20080520150848
ALL CRP.ALL S 0000 20080520150854
ALL CRP.ALL N 0008 20080520151702
ALL CRP.ALL d 0000 20080520152128
Thanks for the suggestions. I did all the checks for STMS and they came back with green lights.
I got into the note that is SAP recommends before doing the work and they state that if the IMPORT_PROPER fails to update your system to at least patch level 75, and then start importing Support Packages. We are well above that patch number, so that was no help.
One thing I noticed was in the Import Log for SPAM/SAINT was a couple of errors.
One is in the ABAP Dictionary Distribution:
--> No active nametab exists for CVERS_SUB Termination due to inconsistencies
Two is in the
--> Nabetab of table CVERS_SUB with status A does not exist.
row or object CVERS_SUB in R3CRPDATA type *FILE in use.
I'm going to look into this in use file. But if anyone has any other ideas, let me know. Thanks,
Ryan
Similar Messages
-
SPAM Update stuck in IMPORT_PROPER
Hi,
I was updating SPAM update 26 for WAS 7.00. It got stuck and the job was going on and on. When I stopped the transaction and restarted SPAM, the SPAM version was shown as 26 but the status was red in IMPORT_PROPER. I tried restarting many times but it is continuously running. I checked the logs and there is no error in the action logs as well as in the detailed logs. The version is updated but it did not get completed. What can be the issue?
Please help!
Regards,
Abhishek JainHello,
I hope you had a backup of your system before you started updating SPAM and/or support packs.
Also, after ensuring you have backup.
Please follow the instructions given in SAP Note 684564 - Re-importing a SPAM/SAINT update
Regards,
Siddhesh
Edited by: Siddhesh Ghag on Apr 9, 2008 11:11 AM -
SPAM update in IMPORT_PROPER phase
Dear All,
I have installed SAP Web Neweaver 04s as ABAP on MSSQL database windows
OS and upgraded kernel 640 patch 175.
But now when i go to import SPAM /SAINT from level 17 to 23 ie.
SAPKD64023 then its running in IMPORT_PROPER Phase since last 5-6 hrs.
PLEASE SUGGEST how to speed up my process??
Log is as below:
Log Overview for SAPKD64023
SAPKD64023 SPAM/SAINT Update - Version 640/0023
BPW System BPW
Generate Transport Information File 02.01.2008 13:41:45 (0)
Successfully Completed
Test Import 02.01.2008 13:41:46 (0) Successfully Completed
Import Request Piece List 02.01.2008 13:41:47 (4) Ended with Warning
Import ABAP Dictionary Objects 02.01.2008 13:41:52 (4) Ended with
Warning
02.01.2008 10:54:46 (4) Ended with Warning
02.01.2008 13:41:52 (4) Ended with Warning
ABAP Dictionary Activation 02.01.2008 14:13:28 (4) Ended with Warning
Import steps not specific to transport request
ABAP Dictionary Distribution 02.01.2008 14:23:31 (4) Ended with Warning
pls help me ASAP.
Regards & Thanks,
Ankita.Hi Ankita,
I advice you to leave it for the moment and wait until it finishe that particular stage and check for the workporcess overview which report its executing at the back.Dont stop the process forcefully as it might cause inconsistency.
Regards,
Iqbal -
ATUALIZATION SPAM IN PHASE IMPORT_PROPER LONG RUNNING
Hi,
Help me
Atualization of SPAM (SAPKD0023) : Long running in phase main import.(IMPORT_PROPER)
Just warnings (4).
Windows Server 2003 enterprise Edition 4GB Ram Oracle 10.2.0.2Hi ,
The problem was solved running the statistics of Oracle. -
Import support package SAPKB70015 at PI System is stuck on IMPORT_PROPER
Dear Expert,
I have some problem when import support package SAPKB70015 at PI System.
IT had shown as below.
Main import
Transport request : SAPKB70015
System : CXI
tp path : tp
Version and release: 372.04.08 700
sap_dext called with msgnr 4:
db call info
function: db_report_interface
fcode: UPDATE_REPORT
tabname: TEXT
len (char): 40
key: /OSP/CL_CJS_CONTEXT===========CP
retcode: 4
Main import
End date and time : 20081120021353
Ended with return code: ===> 12 <===
And I checked the transport log,It shown as below.
4 ETW690 COMMIT "360444" "53156878"
3 ETW674Xstart import of "LIMUCLSD/OSP/CL_CJS_CONTEXT" ...
4 ETW000 1 entry for TADIR updated (R3TRCLAS/OSP/CL_CJS_CONTEXT ).
4 ETW000 REPOS /OSP/CL_CJS_CONTEXT===========CP A replaced.
4 ETW000 dev trc ,00000 Thu Nov 20 02:13:53 2008 39924798 39.924798
4 ETW000 http://dbsloci. ,00000 *** ERROR => Cannot update a LOB column for more than one row piecewise
4 ETW000 85 39.924883
4 ETW000 dev trc ,00000 sc_p=0x110f57d68,no=55,idc_p=0x110f70638,con=0,act=1,slen=125,smax=256,#vars=5,stmt=0x111e1f700,tabl
e=REPOTEXT
4 ETW000 66 39.924949
4 ETW000 dev trc ,00000 prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=2,upsh_p=(nil),ocistmth_p=0x111e20098
4 ETW000 53 39.925002
4 ETW000 dev trc ,00000 IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=84,vmax=32,bound=1,iobuf_p=0x111
0a4220,vda_p=0x111e21a60
4 ETW000 58 39.925060
4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22180,lcurr_p=(nil),rret=0
4 ETW000 48 39.925108
4 ETW000 dev trc ,00000 OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=(nil),vda_p=0x1
11e222c0
4 ETW000 55 39.925163
4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22220,lcurr_p=(nil),rret=2
4 ETW000 47 39.925210
4 ETW000 dev trc ,00000 UPDATE "REPOTEXT" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A2 AND "LANGUAGE" = :A3
4 ETW000 51 39.925261
4 ETW000 dev trc ,00000 RETURNING "DATA" INTO :A4; 29 39.925290
4 ETW000 dbrepolo ,00735 ***LOG BZY=>unexpected return code 2 calling dbrepolo#? @ 735
4 ETW000 75 39.925365
2EETW000 sap_dext called with msgnr "4":
2EETW000 -
db call info -
2EETW000 function: db_report_interface
2EETW000 fcode: UPDATE_REPORT
2EETW000 tabname: TEXT
2EETW000 len (char): 40
2EETW000 key: /OSP/CL_CJS_CONTEXT===========CP
2EETW000 retcode: 4
1 ETP154 MAIN IMPORT
1 ETP110 end date and time : "20081120021353"
1 ETP111 exit code : "12"
1 ETP199 ######################################
System information
SAP = NW2004s SR3
Database = Oracle 10.2.0.2
OS versions = AIX 5.3
Tp version = 700 Unicode 179
R3trans version = 700 Unicode 183
PS.I checked tp connect return code 0 and R3trans u2013s return code 0
Could you please suggest how to fix this problem?
Thank you very much
JaturongIu2019ve updated database statistics and then try to reimport the package again. But It canu2019t import package.
Are you still getting the same error after you retry the statistics update? -
Import support package SAPKB70015. Is stuck in IMPORT_PROPER phase
Dear Expert,
I have some problem when import support package SAPKB70015 at PI System.
IT had shown as below.
Main import
Transport request : SAPKB70015
System : CXI
tp path : tp
Version and release: 372.04.08 700
sap_dext called with msgnr 4:
db call info
function: db_report_interface
fcode: UPDATE_REPORT
tabname: TEXT
len (char): 40
key: /OSP/CL_CJS_CONTEXT===========CP
retcode: 4
Main import
End date and time : 20081120021353
Ended with return code: ===> 12 <===
And I checked the transport log,It shown as below.
4 ETW690 COMMIT "360444" "53156878"
3 ETW674Xstart import of "LIMUCLSD/OSP/CL_CJS_CONTEXT" ...
4 ETW000 1 entry for TADIR updated (R3TRCLAS/OSP/CL_CJS_CONTEXT ).
4 ETW000 REPOS /OSP/CL_CJS_CONTEXT===========CP A replaced.
4 ETW000 [dev trc ,00000] Thu Nov 20 02:13:53 2008 39924798 39.924798
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot update a LOB column for more than one row piecewise
4 ETW000 85 39.924883
4 ETW000 [dev trc ,00000] sc_p=0x110f57d68,no=55,idc_p=0x110f70638,con=0,act=1,slen=125,smax=256,#vars=5,stmt=0x111e1f700,tabl
e=REPOTEXT
4 ETW000 66 39.924949
4 ETW000 [dev trc ,00000] prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=2,upsh_p=(nil),ocistmth_p=0x111e20098
4 ETW000 53 39.925002
4 ETW000 [dev trc ,00000] IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=84,vmax=32,bound=1,iobuf_p=0x111
0a4220,vda_p=0x111e21a60
4 ETW000 58 39.925060
4 ETW000 [dev trc ,00000] lobs=1,lmax=4,lpcnt=0,larr=0x111e22180,lcurr_p=(nil),rret=0
4 ETW000 48 39.925108
4 ETW000 [dev trc ,00000] OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=(nil),vda_p=0x1
11e222c0
4 ETW000 55 39.925163
4 ETW000 [dev trc ,00000] lobs=1,lmax=4,lpcnt=0,larr=0x111e22220,lcurr_p=(nil),rret=2
4 ETW000 47 39.925210
4 ETW000 [dev trc ,00000] UPDATE "REPOTEXT" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A2 AND "LANGUAGE" = :A3
4 ETW000 51 39.925261
4 ETW000 [dev trc ,00000] RETURNING "DATA" INTO :A4; 29 39.925290
4 ETW000 [dbrepolo ,00735] ***LOG BZY=>unexpected return code 2 calling [dbrepolo#? @ 735]
4 ETW000 75 39.925365
2EETW000 sap_dext called with msgnr "4":
2EETW000 -
db call info -
2EETW000 function: db_report_interface
2EETW000 fcode: UPDATE_REPORT
2EETW000 tabname: TEXT
2EETW000 len (char): 40
2EETW000 key: /OSP/CL_CJS_CONTEXT===========CP
2EETW000 retcode: 4
1 ETP154 MAIN IMPORT
1 ETP110 end date and time : "20081120021353"
1 ETP111 exit code : "12"
1 ETP199 ######################################
System information
SAP = NW2004s SR3
Database = Oracle 10.2.0.2
OS versions = AIX 5.3
Tp version = 700 Unicode 179
R3trans version = 700 Unicode 183
PS.I checked tp connect return code 0 and R3trans u2013s return code 0
Could you please suggest how to fix this problem?
Thank you very much
JaturongHello Karthik
I know the list is long. Unfortunately I have never had such a long list of inactive objects in the system during an update or upgrade. But I believe you can make use of the mass activation program RADMASG0 to have them activated. The other option I can think of is to use the function module RS_INACTIVE_OBJECTS_LIST to list all the inactive objects and see whether they can be mass activated from there. I believe it is possible to activate all from there after selecting a block. (Never tried so I cannot guarantee).
Regards
RB -
Error at Import_Proper : Some clarifications?
Hi,
I am facing this error while installing the ST-A/PI (01J_ECC600) support packages. I
am getting stuck at IMPORT_PROPER with error. The error message read as
follows.
Action Logs
import phase 'IMPORT_PROPER' (08.05.2010, 08:22:03)
Error during executing the tp command 'tp R3I all ECQ ...'
tp return code: '0013' , tp message: 'A tool used by tp got a signal from operating syst' , tp output:
initial value of NLS_LANG: 'AMERICAN_AMERICA.WE8DEC'
This is tp version 372.04.88 (release 700)
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBSWPATH is no longer used.
ERROR: stopping on error 13 during MAIN IMPORT
stopping on error 13 during MAIN IMPORT
tp returncode summary:
TOOLS: Highest return code of single steps was: 13
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
Details of the error situation can also be found in the import logs
Abort the import due to an error situation (08.05.2010, 08:22:04)
Import Logs
R3trans received signal 11 from operating system.
Main import
End date and time : 20100510101224
Ended with return code: ===> 13 <===
I am at the Kernel patch level 236(latest) and also having the
tp and R3trans updated to the latest possible level on top of the
new kernels
My questions are:
1. May be I missed a trick by not updating SPAM to the latest level as I am currently on SPAM level 30. Is this any way creating this prolem? (Most Probably)
2. If that is the issue causing this problem, Is there anyway I can remove the lock set in SAINT and proceed to SPAM update through PAT* table. If I remove the locks will the repository/dictionary objects generated through the update also get deleted?
3. Also, If its not possible to remove these locks, is it possible to run SPAM and update it in parallel
Since, we are not so keen on going for the restore of the complete database, we look forward to any means of getting this right.
Please suggest!
Thanks
IHello,
Please check whether any user is doing transports while your appling support packages.
It is advised to lock all users,except SAP*,DDIC and your User ID and then proceed applying support packs.
Regards,
Chaitanya. -
Support Packages Installation Stops at IMPORT_PROPER Phase
Hi Sap stars,
I have started Installation of support packages for PI 7.1 Cluster Server , It got stuck at phase Import_Proper
and do not do anything , Then I executed the TP R3I .....COMMAND Which executed successfully
Then I executed the Command
tp showbuffer SID tag=spam pf=G:\usr\sap\trans
\bin\TP_DOMAIN_SID.PFL
This is tp version 375.33.68 (release 710, unicode enabled)
SID buffer:
SAPKB71007 | | |has already been imported completely
that makes 0 transports to be imported.
tp finished with return code: 0
meaning:
Everything OK
But still in SPAM it is showing the IMPORT_PROPER status in RED
Could anyone tell me how can this status get changed and Import other Support Packages
Thanks In Advance
Anil KumarHi Raghu,
I have used the tp r3i command when I got stuck in Import_proper Phase It ended with TP retun code 008
2EETW109 TABLE "SQL_TOOL_GROUPT" does not exist in Nametab
When I try to run any Transaction Code it is throwing an Dump
OS-Windows, Database_Sqlserver 2005 Application-PI 7.1
Can u pls suggest me what can I do to sort this issue
Thanks In Advance
Anil -
SPAM update Error for patch level 42 on 7.01
Hi all,
While applying SPAM update 42 for 7.01, we received the error below. We also tried to apply a lower version with the same results. Your help is appreciated.
Class CL_OCS_RT_ANALYSIS,Method GET_XML
The row type of the table "ME->T_PATRTVERS" is not compatible with
field symbol type "<FS_PATRTVERS>".
from ST22:
Runtime Errors SYNTAX_ERROR
Date and Time 10/10/2011 05:16:00
Short text
Syntax error in program "CL_OCS_RT_ANALYSIS============CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSPAM" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_OCS_RT_ANALYSIS============CP " in include
"CL_OCS_RT_ANALYSIS============CM002 " in
line 67:
"The row type of the table "ME->T_PATRTVERS" is not compatible
with fie"
"ld symbol type "<FS_PATRTVERS>"."
Thanks,
DomenickDear Domenick,
This issue you are facing is most probably because of a force reset of SPAM queue in IMPORT_PROPER phase.
You might have reset the queue forcibly which has created inconsistency in the system and has destoyed SPAM transaction
related program sources.
Now in order to resolve this you can try out a small fix.
You can pick up the class/interface CL_OCS_RT_ANALYSIS============CP from a system which has already been patched with SAPKD70142. You can transport this class to the affected system.
Once done, try to do the SPAM import. If the SPAM import is successfull it is fine.
If it not successfull, there is no other way apart from restoring the sytem since the SPAM sources are corrupt.
Best Regards,
Abhishek -
Blank From Address Source IP 255.255.255.255
hi,
I tested Exchange 2007 for open relay and it shows relay closed on all the tests.
even then, I see a really large amount of emails per minute (SPAM) stuck in the message queue.
they all have 3 thing in common besides being SPAM.
- From Address is BLANK. shows as <> in Exchange Queue Viewer
- Source IP of those emails is all the same and it's not valid 255.255.255.255
- 95% say Undeliverable: in the Subject line
Anyone else is having this issue? how do I block emails originating from IP 255.255.255.255 or all emails with a blank From Address.
if those emails are simply emails sent by the my server to spammers to notify them the addresses it sent to are invalid, is there a way to not send a NDR for flagged spams? or everything in general?
thank you in advance for any help.
CFWe are having this issue as well.
I tried setting up the following Transport Rule, but still had the problem:
Apply rule to message
when the Subject field contains Undeliverable:
silently drop the message
except when the From address contains @
I thought this would have resolved the issue, but it has not.
I suspect these are emails sent from an external source (for example spamdomain.com) using a spoofed email address that is in my domain (for example [email protected]). If it turns out that it can't be delivered, the Undeliverable message comes back to our server but cannot be delivered to bob because he doesn't exist on our system.
Anybody have any ideas? TIA! -
ERROR WHILE IMPORTING SUPPORT PACKS
Hi all
After successfull installation of ECC - SERVER , while importing SAP_BASIS support pack , spam stuck with XPRA_EXECUTION phase.
Kindly advice me resove this issue
selvanHi,
Provide Import and Action Logs for the Exact error (SPAM >Goto> import/action logs.
Regards
Umesh -
Spam, process freezed in IMPORT_PROPER DD Activation
Hi, I'm new in applying support packages and basis.
I've installed NW2004 and applyied some pachs. Almost all the patchs get a freeze processing in "dd activation" then I stopped the transaction, tryied again and the process got finished (I don't know why this behaviour).
Now I'm trying to process a queue with basis patchs from 15 to 20 and abap also 15 to 20. The process get freezed as in the previous patchs, but when I cancel and try to continue it still gets freeze in "dd activation". Last lines of log shows:
Import phase 'RUN_SPDD_?' (31.05.2007, 07:50:32)
Import phase 'RUN_SPDD_?' was already processed -> skip phase
Import phase 'DDIC_ACTIVATION' (31.05.2007, 07:50:32)
Import phase 'DDIC_ACTIVATION' was already processed -> skip phase
Import phase 'IMPORT_PROPER' (31.05.2007, 07:50:32)
Could any guru help me?
Thanks in advance,
PauloDear,
As per SAP recommendation,
1. go for latest SPAM/SAINT upgrade patch
2, then install latest SAP_BASIS patches, before applying patches read corresponding SAP note & define proper queue. Once the queue is selected start patching
3, go for SAP_ABA etc...
Do not put all patches altogether, sometime system resources may not be sufficient and system will hang.
Answer for question
1. if its stuck in DDIC_activation, check tp system log, what is says..
sometimes it may hang due to RDDIMPDP job is not running properly.
2. Check tp is running
if nothing is happening u have to start patching at OS level using tag spam command.
Its risky to play with OS commands if u r not master in applying patches.
please log call with SAP. -
SAP_BASIS IMPORT_PROPER Error during SPAM for CRM Upgrade
Hi All,
During SPAM IMPORT_PROPER for component SAP_BASIS, encountered error. Checking the Import Logs of the queue, we see error logs in Activate inactive runtime objects. Sample message below.
May we ask how to fix the error for us to be able to continue the upgrade? Thanks.
Activation of sample nametabs with appended fields
06:17:30: Retcode 512: error in DDL statement for ALCCMCUSTP - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of ALCCMCUSTP
06:17:42: Retcode 512: error in DDL statement for ALCCMCUSTV - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of ALCCMCUSTV
06:17:55: Retcode 512: error in DDL statement for ARC_DESTR_VETO - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of ARC_DESTR_VETO
06:18:07: Retcode 512: error in DDL statement for DB6_OPTPROFILE - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of DB6_OPTPROFILE
06:18:19: Retcode 512: error in DDL statement for FDT_TRACE_0200 - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of FDT_TRACE_0200
06:18:31: Retcode 512: error in DDL statement for FDT_TRACE_0201 - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of FDT_TRACE_0201
06:18:43: Retcode 512: error in DDL statement for GE071KF_OLD_NT - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GE071KF_OLD_NT
06:18:55: Retcode 512: error in DDL statement for GTABKEYEXC20 - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEYEXC20
06:19:07: Retcode 512: error in DDL statement for GTABKEY_CASCADE - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEY_CASCADE
06:19:19: Retcode 512: error in DDL statement for GTABKEY_COMPEXCL - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEY_COMPEXCL
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEY_COMPSETS
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEY_C_SYS
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEY_EXT
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLS
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of IACXU
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLS
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of IACXUT
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLS
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of IACXU_C1
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of IACXU_C_TEMP
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of STORE_HELP
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of STORE_LINK_IND
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of SWWOUTBOX
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of SWWWITEXT
21 shadow nametab activations resulted in errors
Begin: Activation of shadow nametabs with DDL (2014/03/19 06:17:30)
End: Activation of shadow nametabs with DDL (2014/03/19 06:19:31)
Begin: Activation of shadow nametabs with DDL (2014/03/19 06:19:31)
(dummy, do not translate)
Regards,
PhilipHi Philip,
Could you please check the below SAP Note. It is a composite notes which has listing of various errors during upgrade
822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
Hope this will be useful
Thanks and Regards
DJ -
Spam is hanging in phase IMPORT_PROPER
Hi!
I am facing with hanging SPAM error in phase IMPORT_PROPER (patch of SAPKB70013 - SAPKB70016).
The SPAM patch terminates after a few sec. in DDIC activation action.
I have looked into log file and founded folllowing:
The job RDDEXECL terminated with error.
The reason seems to be sysntax error in program "CL_PROXY_SERVICE=======CP".
Futhermore I could detect that table SI_WD_FIRST_MAIN_SCREEN cannot be activated.
Can some one help me to solve this problem?
Of great interest was the following:
rescedule possibilities of job RDDEEXECL in order to contibue patch
start of SPAM or tp-commando by ignoring this error
Thank you very much!
ThomMoved to NW Admin...
-
Dear All,
We are Using SAP Enterprise Ecc6 on Windows 2003 Server and oracle-10.2.01.1.0
as database.
my kernel 700 with patch 185, tp version 372.04.40, r3trans version 6.14 (release 700 - 16.10.08 - 16:26:00)
During SPAM patch SAPKA70010 update i am getting below error message.
The import was stopped, since an error occurred during the phase
Software component : Sap_ABA
Spam Status :(import_proper)
Current Action : Queue import (in back ground)
which the Support Package Manager is unable to
resolve its hunge
tp-system log =error:ERROR: stopping on error 12 during TBATG CREATION OF ENQUEUE OBJECTS
Slog:
START CMDIMPORT ACC L 20090422153436 DDIC oiam 20090422153435
STOP CMDIMPORT ACC L 20090422153500 DDIC oiam 20090422153435
START DD IMPORT ACC H 20090422153915 DDIC oiam 20090422153914
STOP DD IMPORT ACC H 20090422154143 DDIC oiam 20090422153914
START DD ACTIVATION ACC A 20090422154805 DDIC oiam
START tp_getprots ACC J 20090422154805 DDIC oiam
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP tp_getprots ACC J 20090422155952 DDIC oiam
STOP DD ACTIVATION ACC A 20090422155952 DDIC oiam
START imp all ACC 20090422170815 BASIS oiam 20090422170815
INFO: event SAP_IMPORT_START triggered successfully
START SET STOPMARK ACC 20090422170815 BASIS oiam 20090422170815
INFO: Buffer saved as
oiam\sapmnt\trans\buffer\ACCSAV.
STOP SET STOPMARK ACC 20090422170816 BASIS oiam 20090422170815
START DISTRIBUTION OF DD-O ACC S 20090422170816 BASIS oiam 20090422170815
START tp_getprots ACC S 20090422170817 BASIS oiam 20090422170815
STOP tp_getprots ACC S 20090422170912 BASIS oiam 20090422170815
STOP DISTRIBUTION OF DD-O ACC S 20090422170912 BASIS oiam 20090422170815
START TBATG CONVERSION OF ACC N 20090422170912 BASIS oiam 20090422170815
START tp_getprots ACC N 20090422170912 BASIS oiam 20090422170815
STOP tp_getprots ACC N 20090422170958 BASIS oiam 20090422170815
STOP TBATG CONVERSION OF ACC N 20090422170958 BASIS oiam 20090422170815
START MOVE NAMETABS ACC 6 20090422170958 BASIS oiam 20090422170815
START tp_getprots ACC P 20090422170958 BASIS oiam 20090422170815
STOP tp_getprots ACC P 20090422171623 BASIS oiam 20090422170815
STOP MOVE NAMETABS ACC 6 20090422171623 BASIS oiam 20090422170815
START TBATG CREATION OF EN ACC n 20090422171624 BASIS oiam 20090422170815
START tp_getprots ACC Y 20090422171624 BASIS oiam 20090422170815
WARNING: System ACC. Warning. 20090422175239 :
ERROR: The following call returned with exit code -100:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=ACC
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System ACC. Warning. 20090422175648 :
ERROR: The following call returned with exit code -100:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=ACC
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
WARNING: (This warning is harmless if no further warnings follow.)
STOP imp all ACC 7006 20090422175812 BASIS oiam 20090422170815
START imp all ACC 20090422202941 BASIS oiam 20090422202940
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT ACC H 20090422202941 BASIS oiam 20090422202940
STOP DD IMPORT ACC H 20090422203224 BASIS oiam 20090422202940
START DD ACTIVATION ACC A 20090422203225 BASIS oiam 20090422202940
START tp_getprots ACC J 20090422203225 BASIS oiam 20090422202940
STOP tp_getprots ACC J 20090422204242 BASIS oiam 20090422202940
STOP DD ACTIVATION ACC A 20090422204242 BASIS oiam 20090422202940
START DISTRIBUTION OF DD-O ACC S 20090422204242 BASIS oiam 20090422202940
START tp_getprots ACC S 20090422204242 BASIS oiam 20090422202940
STOP tp_getprots ACC S 20090422204257 BASIS oiam 20090422202940
STOP DISTRIBUTION OF DD-O ACC S 20090422204257 BASIS oiam 20090422202940
INFO TBATG CONVERSION OF ACC N not needed BASIS oiam 20090422202940
START MOVE NAMETABS ACC 6 20090422204258 BASIS oiam 20090422202940
START tp_getprots ACC P 20090422204258 BASIS oiam 20090422202940
STOP tp_getprots ACC P 20090422204403 BASIS oiam 20090422202940
STOP MOVE NAMETABS ACC 6 20090422204403 BASIS oiam 20090422202940
START MAIN IMPORT ACC I 20090422204403 BASIS oiam 20090422202940
STOP MAIN IMPORT ACC I 20090422213315 BASIS oiam 20090422202940
START tp_getprots ACC Y 20090422213315 BASIS oiam 20090422202940
ERROR ALL ACC n 0012 20090422213510 BASIS oiam 20090422202940
STOP tp_getprots ACC Y 20090422213521 BASIS oiam 20090422202940
START TBATG CREATION OF EN ACC n 20090422213521 BASIS oiam 20090422202940
START tp_getprots ACC Y 20090422213521 BASIS oiam 20090422202940
STOP tp_getprots ACC Y 20090422213522 BASIS oiam 20090422202940
STOP TBATG CREATION OF EN ACC n 20090422213523 BASIS oiam 20090422202940
ERROR: stopping on error 12 during TBATG CREATION OF ENQUEUE OBJECTS
START INFORM SAP-SYSTEM OF ACC Q 20090422213523 BASIS oiam 20090422202940
START tp_getprots ACC Q 20090422213523 BASIS oiam 20090422202940
STOP tp_getprots ACC Q 20090422213524 BASIS oiam 20090422202940
STOP INFORM SAP-SYSTEM OF ACC Q 20090422213524 BASIS oiam 20090422202940
STOP imp all ACC 0012 20090422213524 BASIS oiam 20090422202940
*Alog:*
ALL ACC.ALL t 0000 20090420203835 accadm oiam 20090420203834001540
ALL ACC.ALL t 0000 20090422153351 DDIC oiam
SAPKB70010 ACC.ALL m 0000 20090422153411 SAPUSER DDIC oiam
SAPKA70010 ACC.ALL m 0000 20090422153432 SAPUSER DDIC oiam
SAPKB70010 ACC.ALL L 0004 20090422153454 SAPUSER DDIC oiam 20090422153435
SAPKA70010 ACC.ALL L 0004 20090422153500 SAPUSER DDIC oiam 20090422153435
SAPKB70010 ACC.ALL P 0004 20090422153527 SAPUSER DDIC oiam 20090422153510
SAPKA70010 ACC.ALL P 0004 20090422153533 SAPUSER DDIC oiam 20090422153510
SAPKB70010 ACC.ALL H 0004 20090422154048 SAPUSER DDIC oiam 20090422153914
SAPKA70010 ACC.ALL H 0004 20090422154142 SAPUSER DDIC oiam 20090422153914
ALL ACC.ALL t 0000 20090422154804 DDIC oiam
SAPKA70010 ACC.ALL A 0004 20090422155946 SAPUSER DDIC oiam
SAPKB70010 ACC.ALL A 0004 20090422155946 SAPUSER DDIC oiam
ALL ACC.ALL t 0000 20090422161849 DDIC oiam
ALL ACC.ALL t 0000 20090422162554 BASIS oiam
ALL ACC.ALL t 0000 20090422162652 BASIS oiam
ALL ACC.ALL t 0000 20090422162730 BASIS oiam
ALL ACC.ALL t 0000 20090422162829 BASIS oiam
ALL ACC.ALL t 0000 20090422164156 BASIS oiam
ALL ACC.ALL t 0000 20090422164221 BASIS oiam
ALL ACC.ALL t 0000 20090422164641 BASIS oiam
ALL ACC.ALL t 0000 20090422164807 BASIS oiam
ALL ACC.ALL t 0000 20090422170106 BASIS oiam
ALL ACC.ALL t 0000 20090422170322 BASIS oiam
ALL ACC.ALL a 0000 20090422170816 BASIS oiam 20090422170815
ALL ACC.ALL S 0000 20090422170904 BASIS oiam 20090422170815
ALL ACC.ALL N 0000 20090422170949 BASIS oiam 20090422170815
ALL ACC.ALL 6 0004 20090422171620 BASIS oiam 20090422170815
ALL ACC.ALL t 0000 20090422174340 BASIS oiam
ALL ACC.ALL t 0000 20090422174634 BASIS oiam
ALL ACC.ALL t 0000 20090422181013 BASIS oiam
ALL ACC.ALL t 0000 20090422184657 BASIS oiam
ALL ACC.ALL t 0000 20090422200323 BASIS oiam
ALL ACC.ALL t 0000 20090422201626 BASIS oiam
ALL ACC.ALL t 0000 20090422202939 BASIS oiam
SAPKB70010 ACC.ALL H 0004 20090422203144 SAPUSER BASIS oiam 20090422202940
SAPKA70010 ACC.ALL H 0004 20090422203223 SAPUSER BASIS oiam 20090422202940
SAPKA70010 ACC.ALL A 0004 20090422204239 SAPUSER BASIS oiam 20090422202940
SAPKB70010 ACC.ALL A 0004 20090422204239 SAPUSER BASIS oiam 20090422202940
ALL ACC.ALL S 0000 20090422204255 BASIS oiam 20090422202940
ALL ACC.ALL 6 0000 20090422204402 BASIS oiam 20090422202940
SAPKB70010 ACC.ALL I 0004 20090422212459 SAPUSER BASIS oiam 20090422202940
SAPKA70010 ACC.ALL I 0004 20090422213312 SAPUSER BASIS oiam 20090422202940
ALL ACC.ALL n 0012 20090422213510 BASIS oiam 20090422202940
ALL ACC.ALL n 0000 20090422213522 BASIS oiam 20090422202940
ALL ACC.ALL Q 0000 20090422213523 BASIS oiam 20090422202940
SAPKB70010 ACC.ALL m 0000 20090422215948 SAPUSER BASIS oiam
SAPKA70010 ACC.ALL m 0000 20090422220101 SAPUSER BASIS oiam
ALL ACC.ALL t 0000 20090422220209 BASIS oiam
ALL ACC.ALL t 0000 20090422232136 TMSADM oiam
thanks for support
Keshava*Slog:*
START CMDIMPORT ACC L 20090422153436 DDIC oiam 20090422153435
STOP CMDIMPORT ACC L 20090422153500 DDIC oiam 20090422153435
START DD IMPORT ACC H 20090422153915 DDIC oiam 20090422153914
STOP DD IMPORT ACC H 20090422154143 DDIC oiam 20090422153914
START DD ACTIVATION ACC A 20090422154805 DDIC oiam
START tp_getprots ACC J 20090422154805 DDIC oiam
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP tp_getprots ACC J 20090422155952 DDIC oiam
STOP DD ACTIVATION ACC A 20090422155952 DDIC oiam
START imp all ACC 20090422170815 BASIS oiam 20090422170815
INFO: event SAP_IMPORT_START triggered successfully
START SET STOPMARK ACC 20090422170815 BASIS oiam 20090422170815
INFO: Buffer saved as
oiam\sapmnt\trans\buffer\ACCSAV.
STOP SET STOPMARK ACC 20090422170816 BASIS oiam 20090422170815
START DISTRIBUTION OF DD-O ACC S 20090422170816 BASIS oiam 20090422170815
START tp_getprots ACC S 20090422170817 BASIS oiam 20090422170815
STOP tp_getprots ACC S 20090422170912 BASIS oiam 20090422170815
STOP DISTRIBUTION OF DD-O ACC S 20090422170912 BASIS oiam 20090422170815
START TBATG CONVERSION OF ACC N 20090422170912 BASIS oiam 20090422170815
START tp_getprots ACC N 20090422170912 BASIS oiam 20090422170815
STOP tp_getprots ACC N 20090422170958 BASIS oiam 20090422170815
STOP TBATG CONVERSION OF ACC N 20090422170958 BASIS oiam 20090422170815
START MOVE NAMETABS ACC 6 20090422170958 BASIS oiam 20090422170815
START tp_getprots ACC P 20090422170958 BASIS oiam 20090422170815
STOP tp_getprots ACC P 20090422171623 BASIS oiam 20090422170815
STOP MOVE NAMETABS ACC 6 20090422171623 BASIS oiam 20090422170815
START TBATG CREATION OF EN ACC n 20090422171624 BASIS oiam 20090422170815
START tp_getprots ACC Y 20090422171624 BASIS oiam 20090422170815
WARNING: System ACC. Warning. 20090422175239 :
ERROR: The following call returned with exit code -100:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=ACC
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System ACC. Warning. 20090422175648 :
ERROR: The following call returned with exit code -100:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=ACC
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
WARNING: (This warning is harmless if no further warnings follow.)
STOP imp all ACC 7006 20090422175812 BASIS oiam 20090422170815
START imp all ACC 20090422202941 BASIS oiam 20090422202940
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT ACC H 20090422202941 BASIS oiam 20090422202940
STOP DD IMPORT ACC H 20090422203224 BASIS oiam 20090422202940
START DD ACTIVATION ACC A 20090422203225 BASIS oiam 20090422202940
START tp_getprots ACC J 20090422203225 BASIS oiam 20090422202940
STOP tp_getprots ACC J 20090422204242 BASIS oiam 20090422202940
STOP DD ACTIVATION ACC A 20090422204242 BASIS oiam 20090422202940
START DISTRIBUTION OF DD-O ACC S 20090422204242 BASIS oiam 20090422202940
START tp_getprots ACC S 20090422204242 BASIS oiam 20090422202940
STOP tp_getprots ACC S 20090422204257 BASIS oiam 20090422202940
STOP DISTRIBUTION OF DD-O ACC S 20090422204257 BASIS oiam 20090422202940
INFO TBATG CONVERSION OF ACC N not needed BASIS oiam 20090422202940
START MOVE NAMETABS ACC 6 20090422204258 BASIS oiam 20090422202940
START tp_getprots ACC P 20090422204258 BASIS oiam 20090422202940
STOP tp_getprots ACC P 20090422204403 BASIS oiam 20090422202940
STOP MOVE NAMETABS ACC 6 20090422204403 BASIS oiam 20090422202940
START MAIN IMPORT ACC I 20090422204403 BASIS oiam 20090422202940
STOP MAIN IMPORT ACC I 20090422213315 BASIS oiam 20090422202940
START tp_getprots ACC Y 20090422213315 BASIS oiam 20090422202940
ERROR ALL ACC n 0012 20090422213510 BASIS oiam 20090422202940
STOP tp_getprots ACC Y 20090422213521 BASIS oiam 20090422202940
START TBATG CREATION OF EN ACC n 20090422213521 BASIS oiam 20090422202940
START tp_getprots ACC Y 20090422213521 BASIS oiam 20090422202940
STOP tp_getprots ACC Y 20090422213522 BASIS oiam 20090422202940
STOP TBATG CREATION OF EN ACC n 20090422213523 BASIS oiam 20090422202940
ERROR: stopping on error 12 during TBATG CREATION OF ENQUEUE OBJECTS
START INFORM SAP-SYSTEM OF ACC Q 20090422213523 BASIS oiam 20090422202940
START tp_getprots ACC Q 20090422213523 BASIS oiam 20090422202940
STOP tp_getprots ACC Q 20090422213524 BASIS oiam 20090422202940
STOP INFORM SAP-SYSTEM OF ACC Q 20090422213524 BASIS oiam 20090422202940
STOP imp all ACC 0012 20090422213524 BASIS oiam 20090422202940
Maybe you are looking for
-
Sharing libraries between different user accounts on same Mac
I am having difficulty sharing the same library between two different user accounts. I thought it would be simple matter of allowing the second user account access to the itunes folder in the first user's home folder and then changing location of sec
-
How can I export artboard color in SVG?
Hi Expert, My question is if I apply any background color in artboard then I'm not able to convert this in SVG format even If I close and reopen same file then background color makes white. So Is there any way I can convert illustrator file in SVG (
-
QR Codes Why does adobe not include a State area to fill in.
QR Codes Creation: Why does adobe indesign not include a State area to fill in.
-
RoboHelp 11 .mdb files unhandled in SharePoint version control
Since RoboHelp 11, .mdb files don't seem to be recognized with SharePoint version control. Note that we have ensured the file type is allowed in SharePoint. Lauching RoboHelp in Admin mode does not help. Note that this was working under RoboHelp 10.
-
Hi, I'm very new to MW and user guide is helping me in setting up the tool. I wanted to understand that , during Defining Node, we have to provide detail of 11i instance and R12 instance. I can understand that we have APPL_TOP, iAS Home, 806 HOME, Co