Spare Parts withdrawal at specific counter reading report

Dear Sirs,
My client needs to know which spare sparts parts are withdrawn on a certain vehicle at which exact counter reading so i want to find a link between material withdrawn and measurement documents,
i appreciate any help
thanks in advance

Hi,
This report may be a challenge because you need to find the date when the material was issued and maybe the measurement document was created a few days before; how often you have reading on your system?
You can use following tables to create your custom report:
IMRG      measurement document
AUFM      Goods movement for order
AFIH     Maintenance order header and equipment
IMPTT      Measurement point and equipment number
Regards
Carlos

Similar Messages

  • Advice to create a material type (Semi finished, finished or spare parts)

    Hello all!
    I am facing a big problem to how to create a material type ?
    In my case, this material (engine) is finished good in one plant (let's say 100) and in the same time it's considered as Semi finished good in another plant (200 for example) and we can also sell it as spare parts (plant 200).
    So, i don't know if i will created as finished good or semi finished or spare parts in MM01 transaction? What do you think?

    Lamine,
    Creating an material with type as Semifinsihed and Extending sales view to the article will solve your problem.. Also according to your scenario, i hope you are using SPK for transfer of SEMI FInished Goods from  Plant 100 to Plant 200. If this is there in the MRP view. you will not have any problem in this scenario. You can directly sale from Plant 100 and During MRP run for Plant 200 the material will be used in Plant 200 as Semifinished. Also as Sales view is extended in Plant 200 you can also sell it as Spare parts.
    Regards,
    Vinod Kapote.

  • Report for Order and spare parts

    Hello every one, i am looking for a report which can tell me order number wise use of spare parts. It can be either in order or some seprate report. I have not find any such report till yet. Kindly help me in this.
    Regards
    Abhishek

    Baed on the requiremtns given, IW13 can also be auseful report for you.
    SM

  • Costing spare parts in reporting point

    Hi,
        during back flush how can we track the price for spare parts like washers , while the situation is like this .. ie in one reporting point 5 washer used and in another reporting point 10 washers were used .
        How the quantity can be mentioned during backflush
    Regards
    s.kanna

    Hi Anand,
                 here the situation is we got aroung 1000 components in abom.in that we got washers  with certain qty as per standard,
                 But in shop floor during manufacturing according to free space extra washers were added to tighten the assemply.here washer qty get changed .
                 while running cost estimation as per BOM cost is getting calculated but our client says hw will u estimate the extra washer used in certain assembly.
                 More over they require each assembly should be costed according to exact usage of washers to that particular assembly.
                 here scenario is REM....period end closing....
                 we are following cost estimation with washer qty as per BOM.
    Regards
    s.suresh kanna

  • Report for outgoing service spare parts

    Hi,
    My client wants to have a report (gate pass or any proof for outgoing) for outgoing service spare parts for repair
    Is there any provision to have a returnable gate pass for service orders where goods are taken away for repair and to be delivered back to the plant.
    Pls suggest ur comments.

    Hi,
    You can do the Subcontracting scenraio for this service orders.
    So while sending the spare parts to vendor create the Subcontracting PO with item category L
    Send the parts in 541 mvt type to vendor.
    In MBLB you will get the report with respect to vendor how many parts you have sent to the vendor with value if you maintained for that part in the material master.
    rgds
    Chidanand

  • READ REPORT for specific version

    I'm using function module RPY_PROGRAM_READ that calls READ REPORT.
    However I'd like to get the code for a previous version. The READ REPORT is very limited with it's options and I can't find a function module (RFC enabled) that does this. Any suggestions?
    Thank you and best regards!

    Check the Standard Program RSVRSRS1
    OBJNAME = <Program Name>
    OBJTYPE = REPS
    VERSNO = <Version Number>
    Kanagaraja L

  • CRM Service - ECC Logisitcs Integration (Spare Parts in a Service Order)

    Hi Experts,
    We have been trying to configure a scenario for CRM Service Orders with SAP ECC logistics integration in CRM 7.0 EHP1.
    We are aware of the standard configuration wherein we assign one logistics scenario ( Purchase Requisition or Purchase Order or Reservation) for a specific service organization & Item Category for spare parts in service order.
    Our first query : Is it standard that the spare part will be automatically reserved if it is in stock (after ECC availability check from service order) and purchase requisition or purchase order is created only if it is not in stock?
    We also understand that while a reservation happens during Service order creation, the goods issue or material withdrawal happens only on service confirmation. If this the case, how will the physical delivery happen to customer? This is our second query.
    Please note that we are raising this query only for spare part items in service order and not for sales item in service order.
    It would be great if you could help us with this issue.
    Responses will be suitably rewarded.
    Thanks,
    Prish

    Hi Pritesh,
    Thank you for your prompt reply and help, appreciate the same, we would be going for the scenario where the service order in sap crm has saleable parts, the service order would get replicated to ecc as a sales order and the costs would get booked when the post goods issue is performed after creating the delivery in SAP ECC.
    Following are the configurations done
    1) Service Order type ZRVW is created in SAP CRM
    2) The same service order ZRVW is mapped in SAP ECC
    3) The service order in SAP CRM has the following number range and the same is kept internal
    4) The same number range is marked as external in SAP ECC in vn01 tcode
    5) The number range is assigned to the document type ZRVW in SAP ECC
    6) Item category determinations are done in SAP CRM, standard SRVS(Sales items are copied to YRVS)
    7) The same item category determination is also set in SAP ECC for Item category group NORM
    8) Item category determination is also set for ERLA as item category group in ECC
    9) The item category YRVS is set to delivery relevant in SAP ECC
    10) The standard schedule line is determined which is CP is relevant for delivery
    11) The sales area is also assigned to the document type ZRVW.
    12) In SAP CRM, the status profile YCONT is assigned, having the business transaction to be distributed, the status of the same is set to allowed for completed status
    13) The status profile has been assigned to the transaction type ZRVW
    14) Pricing configurations are also done in sap crm and sap ecc
    15) Now I am creating the service order ZRVW in SAP CRM, having saleable parts, customer's and material's exist in both systems having the same sales area, the status is set to completed at item and header level
    16) The system is throwing an error when I click on edit
    17) When checked In sap ecc the system says that the document does not exist
    18 I did open the error in SAP CRM and it says that there are some settings required for billing
    Since there is no billing relevance to this scenario in the item category the billing relevance is set to no billing
    Please advice further
    Kind Regards
    Atul

  • MRP design for Service Spare Parts

    Hello,
    I am in process of designing the MRP run for service spare parts for construction and mining equipments business. There is a central warehouse and small depots.
    Help me out to design following MRP requirements.
    1.     MRP process is expected to consider stocks at all these locations i.e central ware house and depots. Optimization across locations and stock transfers to be considered.
    2.     MRP process is expected to consider open PO requirements.
    3.     MRP process is expected to consider in-house service orders reservations requirements.
    4.     MRP process is expected to consider open sales spare parts order demand from dealers.
    5.     Certain formula base forecast requirements for specific spare part
    If SAP standard solution is there or any work around is expected.
    Regards
    Sanjeev Dhavan

    1. MRP process is expected to consider stocks at all these locations i.e central ware house and depots. Optimization across locations and stock transfers to be considered.
    - MRP can be run for a whole plant or single material or MRP area(group together some storage location). I hope your warehouse is a plant so you can run the MRP at your plant(ware house) level.
    2. MRP process is expected to consider open PO requirements.
    - You should use consumption based planning but you need to identify what type of MRP you want to use.
        - reorder point planning     - forecast based planning      - time phased planning
        - in general all the above MRP will consider the open PO / PRs
    3. MRP process is expected to consider in-house service orders reservations requirements.
    -  this is possible by selecting proper MRP type, for ex. if you want to use reorder point planning, then you should use V1(Reorder point planning with external requirements) which includes sales order and manual reservation in net req calculation.
    4. MRP process is expected to consider open sales spare parts order demand from dealers.
    - Refer point 3
    5. Certain formula base forecast requirements for specific spare part
    - do you want to use forecast based MRP? what formula you want to use?

  • Moving average price for in-house produced spare parts

    Hi all:
    We use moving average price V for spare parts which are produced in-house - production order deployed for such business.
    During goods receipt, I can post the material document, but no material is posted into inventory, and no financial document is created either.
    Can anyone tell me the reason. It quite urgent. Thanks.
    Andy

    Hi,
    Check whether your material type is marked for Quantity and Value updates for that Valuation Area. This can be checked in Logistics General->Material Master->Basic Settings->Material Types->Attributes to Material Types and in that Quantity and Value Updation.
    Also Check OBYC settings for material account determination specific to BSX and WRX transaction keys for that valuation area.
    Thanks
    Krishna.

  • Spare Parts / Screen Goes Black

    Hi guys,
    Anybody know a trustable source of getting spare parts of iMac in Europe? (better in Spain, but the UK will be fine)
    A couple of days ago my iMac just died. The screen turned off but i could hear the iMac running. I restarted in safe mode to check if that could be a Software problem and the it lasted on for a couple of minutes and it turned off completely. It never turned on again.
    I talked to the repair service and they said the most common cause could be
    1 - The Internal Power Source (around 200 euros of repair cost)
    2 - The Inverter (around 500 euros of repair cost)
    For a 3 years old iMac, paying 500 euros y NOT an option. I am a bit **** out about the reliability of Mac now.
    Anyhow, i have to resolve the problem or use it as a fairly big paper holder. I might buy the piece and ask a friend of mine who is an electronic engineer to help me out. I checked the iFix guides and also parts in the US and the cost of the Power Source or Inverter in never more than 100 euros.
    By the way, by reading on the Internet about this turn off monitor problem most of the people say the the usual causes are the Display Power Source or the Inverter, but it could be that the memory went bad too.
    Thanks for any help,
    S

    HI,
    It sure wouldn't hurt to try and boot from your install disc.
    Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    *(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 10% to 15% free disk space
    Try Resetting the SMC
    Try Resetting the PRAM
    Carolyn
    Message was edited by: Carolyn Samit

  • Need field and table for spare part material and price for a given material

    Hi,
          In need to create a report with following fields:-
           Customer           Material          spare part material            spare part description             price                   currency.
    From which table and field I can get all this information.Please guide me.
    Hint.  cl30n transaction for material managemant.
             vk13 transaction for price maintenace.
    Regards.

    CL30N is a general transaction that can be used for any classification, but material master maintenance is usually MM01/MM02 or MM41/MM42
    Material description can be taken from table MAKT
    customer from table KNA1
    The question is what you are going to analyse? where do material and customer tie together? do you do the analysis on sales orders VBAK and VBAP ? or invoices  VBRK and VBRP? or customer material info record KNMT? 
    or do you capture this info in classification? then you get the values from AUSP
    Edited by: Jürgen L. on Aug 3, 2010 9:42 AM

  • How do I search on a specific alert in reporting

    Hello. I want to run a report for a specific alert that will show me all the servers and date/times that have experienced this alert. Can anyone help me with how to do this please? i know how to run a report on alerts by server, but I want to do one by
    alert. Thanks.

    Hi Zaransvan,
    You can only get this level of detail from your Operations manager Database. By default the Operations manager keeps 7 or 14 days worth of detailed alert data before its groomed out(unless you have changed it). Its then stored in the Operations Managers
    DW BUT the Operations Manager DW only stores the groomed alert data so you wont get the detail for every alert rather a summary with repeat count.
    So I suggest you create an alerts view and either target one specific rule to report on so you can see the recent alerts in detail. You can then run the below query can be run against the DW to get the data
    your after (within the specified time range) you can then export it to CSV for review. 
    use OperationsManagerDW
    SELECT
    vAlert.RaisedDateTime,
    vAlert.AlertName,
    vAlert.Severity,
    vAlert.Priority,
    vAlert.Category,
    vManagedEntity.Path,
    vAlert.RepeatCount
    FROM Alert.vAlert AS vAlert
    INNER JOIN vManagedEntity ON vAlert.ManagedEntityRowId = vManagedEntity.ManagedEntityRowId
    WHERE
    vAlert.RaisedDateTime >= '2014-06-01 00:00:00.000'
    AND vAlert.RaisedDateTime < '2014-06-24 23:59:00.000'
    ORDER BY vAlert.RaisedDateTime DESC
    Thanks Martin
    sustaslog.wordpress.com

  • How to get unique ID'd count in report

    HI ,
    I have following data in ods.
    ID  Degree  Field Counter
    12    Grad       Computers   1
    12    PG          Computers      1
    13   Grad       Electronics    1
    14   PG       Computers      1
    I need a report to display the number of ID's with computers field.
    In the above example Id 12 has two records so the count is coming as 3.(12 ID two times and 14 ID).
    But I have to display only unique ID's.I have to have count 2(12ID and 14 ID).
    How can I achieve unique ID's count in report.
    Edited by: SAP Consultant on Aug 6, 2011 7:24 AM

    Hi,
    Create a RKF and restrict it with Field "Computer" and key figure as count, after that in properties of RKF you can set "Calculate result as" option to "Count of all values".
    And if you want to get it across ID's then create an exception aggregation on this RKF and set reference characteristics as "ID".
    Regards,
    Durgesh.

  • Decimal conversion of Sales Tax in 'SPARE PARTS SALE INVOICE' ( smart form)

    Hello,
    I am displaying a the value of the Sales Taxc in 'SPARE PARTS SALE INVOICE'. (in Smart Form)
    The field(which holds the Sales Tax value is 'KWERT' -LBBIL_INVOICE-IT_KOND ), with datatype 'CURR', reference table 'KOMK' and reference field 'WAERK'.
    In my smart form,i have declared a variable 'SALES_VALUE' of datatype 'KWERT' and reference field 'IT_PRICE-WAERK' (LBBIL_INVOICE-IT_PRICE), where 'WAERK' is the SD document currency.
    Now when i display the field 'SALES_VALUE' i get 735.00 , whereas the original value in the field is 73.5
    how to correct this and where am i wrong ?
    Thankyou for yur time and really appreciate the help.
    Shehryar

    You are using currency fields that reference a currency code. Most currencies in SAP have two decimal places. Dividing by 100 will work in most cases. Ideally you should get the CURRDEC value in table TCURX for the currency you are working with... then divide by 10 that number of times.
    example-
    USD, 2 decimals, divide by 10 twice.
    There is a function module that will do this for you. Can't think of the name...???

  • What is best practice for dealing with Engineering Spare Parts?

    Hello All,
    I am after some advice regarding the process for handling engineering spare parts in PM. (We run ECC 5)
    Our current process is as follows:
    All materials are set up as HIBE's
    Each material is batch managed
    The Batch field is used for the Bin location
    We are now looking to role out PM to a site that has in excess of 50,000 spare parts and want to make sure we use best practice for handling the spare parts. We are now considering using a basic WM setup to handle the movement of parts.
    Please can you provide me with some feedback on what you feel the best practice is for dealing with these parts?
    We are looking to set up a solution that will us to generate pick lists etc and implment a scanning solution to move parts in and out of stores.
    Regards
    Chris

    Hi,
    I hope all the 50000 spare parts are maintained as stock items.
    1. Based on the usage of those spare parts, try to define safety stock & define MRP as "Reorder Point Planning". By this, you can avoid petty cash purchase.
    2. By keeping the spare parts (atleast critical components) in stock, Planned Maintenance as well as unplanned maintenance will not get delayed.
    3. By doing GI based on reservation, qty can be tracked against the order & equipment.
    As this question is MM & WM related, they can give better clarity on this.
    Regards,
    Maheswaran.

Maybe you are looking for