Speakerphone bug identified in 1.1.2

While on a call using speakerphone, adjust volume while you talk. Your voice will completely drop out to the listener on the other end. Drop outs seem to last about 3-4 seconds, enough to drop 4-5 words or so each time you press the volume (in either direction).
I'm told this is a mic gain problem, software in nature, and was worsened by 1.1.2. Even though the speaker and mic are so close together, they apparently can be adjusted to work together - Motorola has done it for years.

(I assume with the recently added/edited articles link ;D)
i eventually realised that trying to conduct the conversation using edits in my previous post wasn't tremendously helpful. yep ... that one showed up buried underneath all the KB docs related to Mac OS 10.4.6. we may yet see a few more explicit reports of bug-fixes coming through over the next few days via that link:
Articles modified in last 7 days
... although i don't have as good a feel for that as i do for patterns of bug-fix reports after new itunes versions come out. (less practice.)
love, b

Similar Messages

Jawbone Bluetooth / Speakerphone Bug

I have the Jawbone hooked up to my iPhone. When I answer a call and pick speaker phone, the iPhone initially connects to the speakerphone and then, after a word, jumps the audio selection back to the Jawbone. Can anyone with an iPhone and Jawbone duplicate this bug?

Actually, I have a similiar bug. My husband and I both have iPhones and JawBone headsets. We both have the following problems:
1. If the headset and phone are paired, then if I make a call NOT using the headset, the following call (incoming or outgoing) will not be picked up by my jawbone headset -- even though the Bluetooth option says it is paired and when I make/receive that call, I do not get any audio source options. I have to unpair and repair every time this happens -- annoying!
2. If I want to use the phone and not the ear piece, and I click the audio source as iPhone, it will still send it to my headset. I then have to click the iPhone audio source a second time. This is hard to manage since I'm expecting the call on the iPhone and have it up to my ear (and the screen turns off, of course).
I hope this gets fixed!!

CS3 bug identified. Will it be fixed?

I am excited to upgrade to CS3, but I am experiencing an issue that is not present in the previous version. The program crashes when trying to render the audio previews of a nested timeline. The error looks like this:
Premiere Pro Debug Event
"[..\..\Src\AudioRender\StackAudioBuffer.cpp-58]"
This is not a problem in version 2.0. I simply cannot upgrade to CS3 until this has been fixed......Will a patch be released? I found a user forum where someone else had the same problem. This is what he wrote:
"I can continually reproduce this audio bug. Whenever I use a "constant power" audio transition on a stereo clip with a "fill left" filter applied that is at the end of one of the adjoining clips, I get an error about a audio stack problem. I can reproduce this all day and night. Simply remove the audio transition and it works until I hit the next transition that does not have any overlap on one side"
The timeline I am trying to render has many occurrences of what he is explaining, so it could certainly point to the problem.

>There is no guarantee that anyone from Adobe is here
I have seen the teams of other apps here on the Forum but never for Premiere!
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=7
That is the bug report page.
>So its a godo idea to document it here and have others duplicate it to confirm it is indeed a >big and not an local environment problem.
That is a good point but keep in mind that the environmental issue might be one that many users will encounter and may be determined not by the condition of the environment but by the configuration. This might not be confirmed here on the forum if the users here have a different configuration. Unless it is clearly determine that is corruption, conflict or lack of resources.
To that regard the what is your configuration? And are all your plug ins up to date?
BTW it is also possible that both users have a corruption that is identical so it can still go either way!

QVPN / QuickVPN - Showstopper bugs identified

I've been struggling with Client VPN on WRVS4400Nv2 (fw. V1.00.09-ETSI) and the QuickVPN 1.2.11 software. These problms are still present with QVPN / Quick VPN client version 1.3.0.3.
The problem was, that I couldn't connect to the router with QuickVPN (the classic "Remote gateway not responding" error). I found a way to debug from the command line from experts-exchange.com (I think it was this link). So here goes...
This is what I found:
If I used the 123456789.dnsalias.net (number represent the lenght not the real hostname) the client didn't work, but once I changed to using the IP address it worked. The reason seem to be, that the server address in ipsec is LIMITED TO 16 CHARACTERS or it should be an IP address.
The command string with problems when running "c:\Program Files\Linksys\Linksys VPN Client>ipsec -debug":
NetshCommandStr = netsh advfirewall consec add rule name="IPsec_Tunnel"endpoint1=192.168.0.100 endpoint2=10.0.0.0/24
action=requireinrequireout description="IPsec Tunnel" mode=tunnel enable=yes profile=any type=static localtunnel=192.168.0.100
remotetunnel=123456789.dnsalirequireinrequireout auth1=computerpsk auth1psk=kNF7askq2ghhkFDbcp5h
qmsecmethods=esp:md5-3des+60min+50000kb,esp:sha1-3des+60min+50000kb,esp:md5-aes128+60min+50000kb,esp:sha1-aes128+60min+50000kb
qmpfs=mainmode
As you can see the server address is truncated to just "123456789.dnsali". The generated ipsec.conf-file has the whole address. The QuickVPN FRONTEND for the console program should do it's job correctly. Latest version also has the bug. Got my VPN working today by using IP-address instead of remote.verylongdomain.com.
THE BUGS - SUMMARY:
1. QVPN doesn't handle long hostnames - MUST USE IP address (sadly this is not a joke - ).
2. Client doesn't give ANY errors from that part of the execution, but only later when the ping doesn't work.
3. Client doesn't give spesific errors (example. It should say if the problem was the password, or the gateway, etc., not combine them all)
4. Client doest run on Windows 7 without compatibility mode (in the Vista SP2 compatibility mode it works as well as in native Vista)
4.b Error message is flawed "This only works in Windos 2000 / XP" - It does work on vista....
The Real problem IMHO:
If Cisco decides to create a quickly ductaped piece of software that is a combination of OpenSSL, GNU Wget and Marcus Muellers IPSEC-tool, you should give them credit, distribute the source code (Don't know really if open source principles apply here), or maybe hire them to do the job correctly
This is basically the same info as my old post here.
PS. Who got the great idea of minimum 9 character usernames and the n+1 step software download process

Speakerphone Bug? Can't Replicate

Interesting thing happened today,
Was at work, and tried to make a phone call. Phone was stuck on speakerphone whether I hit the Speakerphone icon or not. Took the call anyway.
Tried to replicate this issue and now it works properly. Did not have to do anything. Made a test call and it worked.
Any idea what could have caused this?
iPhone 4 (CDMA), iOS 5.0.1.

This problem is fixed in the latest software (14.1.G.1.534) which is currently being rolled out.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

TO EVERYONE HAVING NETWORK ISSUES: Possible Bug Identified. Need Testers.

Please do the following and report back if it solves your issue.
sudo ifconfig en1 mtu 1400
... or if you're on Ethernet (en0), go to System Preferences / Network / Ethernet / Advanced / Ethernet and set the configuration on Manual. Set the MTU to 1400.
This isn't the most optimal value, but it's low enough to account for the issues I've tested.
What seems to be happening is that the MSS value being sent by OS X is not accounting for the additional bytes required for the TCP optimizations that were added (timestamps in particular). So servers are probably trying to send larger packets than they should back to the client (You most likely).
Message was edited by: mreckhof

It doesn't matter what you're using (Ethernet or Airport). They both default to an MTU of 1500 and therefore an MSS of 1460, which is too large for PPPoE users with timestamps enabled.
So reducing the MTU (temporarily - again, this is not a fix, it's a setting to prove that this is the issue) to 1400 now reduces the MSS to 1360 which is plenty small unless you've got a lot of tunnels in path which most people won't.
If we can confirm this is related to the problem that most people are having then we'll have a very solid case for what the bug is.

CS4 Rectangular Marqee & Guides Bugs Identified

One of the first things I noticed upoin upgrading was that any rectangular marquee selection appears 1 pixel to the right of the pixel snap point. Interestingly, guides brought in with snap-to-pixel appear just to the left (x-plane) or above (y-plane). See below for some screen captures I refer to in my analysis:
http://cstashuk.aristotle.net/cs4/
GUIDES:
When bringing in guides I was snapping-to-pixel and I even watched the Info dialog window showing I was snapped to the pixel location of 100, only to let go of the mouse button and see the guides "shifted slightly". The grey line that appears while you are moving/establishing the guide does however click to pixels as I am moving the mouse. See "ps_cs4_guides.gif" to make the point. These are guides brought in at 100 pixels on both the x and y axis. It shows the red guides shifted slightly which I suppose is not such a big deal, but why has this changed from ALL earlier versions. For someone who is trying to use guides to insure exact crpping, this is disappointing.
RECTANGULAR MARQUEE:
The other samples I posted show how snap-to-pixel rectangular marquee selections are off on the left side only (see samples 1-3). Note however that sample "ps_cs4_marquee_circular" which shows that the circular marquee successfully represents it left "x=0" location.
I would love to know if anyone has solved these issues. Thanks in advance!!
Christopher

Ann,
Check your Photoshop 11 Preferences > Performance > GPU Settings > Advanced Settings > GL Settings >
Advanced Drawing
This last box should be grayed out because you're running a PPC machine. It's certainly grayed out on my machine.
Folks with Mac-Intel boxes have full access to all Advanced Drawing options, including a box for
Use for Image Display.
If they have that enabled, I can see it making some pretty heavy demands on the graphics card. Those of us running G4 and G5 boxes don't have to worry about that. ;)

Is there a breakdown for Cisco bug ids?

I'm curious about what the values in the bug id represent. For example. All bug ids start with CSC followed by two letters and a series of numbers. Do the two letters represent anything beyond random unique values? I was hoping that by looking at the release notes for a new code release, that I could easily identify what type of bugs were fixed. More specifically in my case, I want to easily identify if security vulnerabilities were fixed in a particular code release without having to maintain a comprehensive list of all the security bugs.

Short answer: No special meaning, just a sequential counting identifier.
Longer answer:
DDTS (Distributed Defect Tracking System from Rational Software was the original bug tracking system that Cisco installed in the early 1990s for the software that would eventually come to be known as Cisco IOS. The bugid format enforced by the software at the time was XXXxxNNNNN. Remember, 1990 was pre-web - this was all 80x24 terminal screen and character based. Pre-Y2K bugs. A long time ago in a galaxy far, far away.
At the time the lettering was selected:
CSC was for "Cisco Systems Corporation"
di was for "Defect Identifier"
and then the number was just a sequential defect number.
So the earliest bugs were of the form CSCdi12345.
This went well until the 100,000th bug!
At that time, it was decided to increment the letter, to dj, dk, dl, etc etc. as it it were just a counting digit. CSCekXXXXX is the highest set I see in the 12.4 release notes.
Don't be alarmed that the number is so high - defect identifiers are assigned for ALL defects and also a lot of administrative testing events, including ones in internal testing and very early development. A small fraction of identifiers apply to released code.
At some point, the IOS "S" family of releases picked new two-letter baseline for some classes of bugs. "sa" formed the baseline defect identifier for a revised code base, and I see bug identifiers in the CSCtcXXXXXX range at this point. It seems that the 15.0 release now uses that "sa-and-higher" counting index, as does the ASA. I'm not sure what event moved people to start using the "sa" baseline.
I think some other Business Units may have picked other baselines, but it is most appropriate to think of the two-letters-and-five-numbers at the end of a bugid as just a 7 digit number with base-26 as the high order bits.
There is no specific signifigance to the lettering, just a lot of history.
Athough DDTS was replaced some time ago, so many tools orbiting the system expect the CSCxxXXXXX bugid form that its use persists to this day.

IOS7 slows down iphone

I am the biggest fan for Apple. I love using Apple gadgets and my iPhone 4S. I am pretty knowledgable in technical aspects of OSX and iOS and its basic functionality. After i updated my 4S to iOS7, my device has bcome dead slow though d free space is 4GB+. Its pretty annoying and disappointing. There are several apps like "Google Places" crashes though i try to reinstall it. I personally feel iOS7 has attracted many disappointed clients like me.
It takes time to call back when i access a missed call on my locked screen.
It takes time to access any app when i access it on my locked screen
Camera doesn't let me click as easily as i was able to to do it on iOS6 and many more..
I tried reinstalling the OS and have done all possible troubleshooting by myself and also by taking help from my Pals who are apple certified technicians and the situation remains the same.
This article is for iOS developers to rework ASAP on the bugs identified to ensure they dont drop the value of their product.

This article is for iOS developers to rework ASAP on the bugs identified to ensure they dont drop the value of their product.
This is a user-to-user tech support forum and Apple and their developers do not routinely read posts. If you have something to say to Apple, post it here:
Apple - iPhone - Feedback

Medical Images not displaying properly with Microsoft Terminal Services

Virtually all scaled images that are displayed in Internet Explorer when in Microsoft Terminal Services are displayed with no smoothing. This has been tested with IE8, Server 2003, Server 2008.
Here is the original issue thread from 2009 (5 years ago) that states that this issue is a bug from microsoft. Is there a Bug identifier that can be used to track where it is fixed?
Original forum topic:
internet-explorer-image-file-ts-bad-image
I need this fixed ASAP, as medical images need to be of the highest quality, and this service reduces that quality. Can anyone speak to me about what the status is for a fix for this?

Hi Paul,
Thank you for posting in Windows Server Forum.
What’s the client RDP version you are using? I will suggest you to update the RDP to RDP 7.0 and IE version to IE9-10 and then check the result. Use the Manage Add-ons dialog in Internet Explorer to enable the Terminal Services ActiveX Control. Apart from these,
suggest you to perform below steps.
Firstly install, MS12-037: Cumulative Security Update for Internet Explorer: June 12, 2012
You many need to restart the server to take effect. Also Please check that you have “Mshtml.dll & Wmshtml.dll” file.
Hope it helps!
Thanks.
Dharmesh Solanki

DRM-21003 error for database connection

Hi,
I installed DRM 11.1.2 for win32 on my laptop and when I tried to set up database connection (to 11g XE), I am getting error message:
Connection Failed: DRM-21003: The Oracle.DataAccess client is not the expected version.
I installed Oracle XE 11.2.0.2 on my laptop. I also tried to connect to 10g server(10.2.0.4), but still has the same error.
Thanks.
-Rong

Hi,
Apparently,this is a bug in version 11.2.1.0.I had the same issue.I believe this is an bug identified internally.BUG # 9911822.I uninstalled 11.2.1.0 and installed 11.2.1.102 version of the DRM software and this error no longer appears.
-Sireesha.

DATE issue in UIX page

Dear All,
I am having a weird date related issue while loading a date value. We show date values in Uix pages, all the Oracle.sql.Date (which in turn convered to java.sql.Data)are displayed a day less in the UIX. The dates are shown in <textInput> or <messageTextInput> or <formattedText> fields. For ex: if the DB date is 05/11/2004, it is shown as 04/11/2004 in the screens. The dates stored and the retreived in the java middle tier are same, but the value printed in the UIX is a day less. The server time maintained is EST and this application is used by the clients in US.
The things work fine when run on the local machines pointing to the same database. But, when a server is accessed from the same client machine the problem is simulated.
This is a production issue which needs to be addressed immediately.
Please send your inputs on this.
Thanking in advance.
Girish S C

There were a couple of bugs related to the date lag problem that you reported. These should have been fixed in latest releases of UIX (The last such bug identified has been fixed in version 2.2.12, the latest as of date being 2.2.16). You would have to wait until this is publicly available and upgrade to this version.

Elements 8 editing raw file in CS4

I recently upgraded Elements (to Elements 8) and photoshop to CS4. I use elements to organize my photos but I like to edit in CS4. When I select a raw image in elements and select Edit in Photoshop, Photoshop CS4 does not open the raw image in ACR, rather it is opened directly in the CS4 editor. If I try to open the file directly from CS4, it is opened up in ACR. Any clues as to how I can get it to work from elements? Editing the file in elements does open in the file in ACR. Adobe elements is using the ACR plugin version 5.5.0.97. CS4 is using ACR plugin version 5.6.0.148.
Thanks.

When I select a raw image in elements and select Edit in Photoshop, Photoshop CS4 does not open the raw image in ACR, rather it is opened directly in the CS4 editor. If I try to open the file directly from CS4, it is opened up in ACR.
This is a bug identified in PSE 7 that Adobe chose not to fix in PSE 8, evidently. See this tech note for a clunky workaround:
http://kb2.adobe.com/cps/408/kb408150.html
Editing the file in elements does open in the file in ACR. Adobe elements is using the ACR plugin version 5.5.0.97. CS4 is using ACR plugin version 5.6.0.148.
You can update your PSE 8 to have the latest ACR 5.6:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Problems_opening_raw

How to play next audio book file/chapter?

Trying to setup an ipad2 for my mother and load some of her audio books on it. The audio books are mostly in mp3 format with some being in m4a. Books are marked as audio book format.
Problem is that when placed on the ipad and accessed by going through music -> more -> audio books, the books appear, selecting one shows all files/parts of the book, but when playing, it does not advance to next file. Particular problem in which some books are split into 3 minute chunks per file.
Taking the same files and placing them on my ipod 5.5, they play fine and auto-advance fine.
Any ideas?
Ipad 2 w/ iOS 5

iOs 5 Bug identified...
After selecting an audio book, if you select a file/chapter directly, it will play only that file/chapter and NOT continue to the next one. Also, no icon (speaker) is shown for the files/chapter being played.
If instead you press the play button at top left (not main focus on screen), then the book starts playing from beginning, an icon is present next to file/chapter, and the files/chapter are played sequentially automatically.

Unable to View Dashboard (QWAAS) in IPad(SAP BO 4.1 SP2)

Hi,
I Have published Dashboard with Qwaas Connections in BO 4.1 SP2 Server. But i am unable to see the Data in IPad. Its coming with following Error.

Hi,
can you let us know the following:
version of ipad you are using
SAP BI app ios version 5.1.x?
iOS 7?
this seems to be a BUG identified by SAP. Will be fixed soon, however no target date is specified yet
Regards,
Atul B

Speakerphone bug identified in 1.1.2

Similar Messages

Maybe you are looking for