Split signals between front and rear ports?

just wondering if it is possible to split two different feeds between the front and rear ports on an Xfi.
for example game sound through the speakers and then Ventrilo/Teamspeak via the front audio jacks on my case(as the Xfi has the header for front audio).

Sorry to bump an old post, but this is exactly what I have been looking for.
Does anyone know if this is attainable on the Pci-e X-fi Titanium card with an Intel HD audio front panel connected to the card?
Thanks!

Similar Messages

How can I tell if fan between front and rear bay is working?

hi all
How can I tell if fan between front and rear bays is working? I put my hand behind G4 MDD to feel for air flow and it seems minimal. I hear a wind tunnel sound but I feel more heat than air flow. Please help as I don't want my Mac to overheat
Thanks, Web dude

You can run your mac with the side "door" open - down flat to the right of the computer. You should be able to see the fan do (or not do) its thing.
I have done this (run the mac with the side open) many times. For safety, I turn the mac off before opening / closing the door.

I cannot toggle between front and rear cameras on my iPad 4; any ideas?

I cannot toggle between front and rear cameras on my iPad 4; Any ideas?

Make sure IOS is updated to latest version
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

How to change the capture resolution of CaptureDevice and toggle between front and rear camera

Hi. I'm using Visual Studio 2013, and the Windows Phone App template. I'm using the Microsoft.Devices / CaptureVideo API to capture video. I now want to set the resolution to capture the video in a specific(available) resolution. How do I do that?
Code snippet reference to API:
CaptureVideo vcDevice = CaptureDeviceConfiguration.GetDefaultVideoCaptureDevice();
and I also want to put a button there to toggle between front and rear camera. If I click the button, and the rear camera is currently active, the front camera must become active and vice versa. How do I do that with this API?
Thank you.

visit this page to know how.
http://stackoverflow.com/questions/25466088/how-to-switch-to-front-camera-in-windows-phone-8-1-winrt-jupiter

Toggle between front and rear video capture device

Hi.
First of all, is this where I can ask questions about wp c#?
second, How do I programmatically toggle front and rear video camera? I what to put a menu item option to switch between front(if available) and rear camera. Can you provide me with c# code to do this?
notes: I'm using directive Microsoft.Devices and the following Classes to capture videos:
// Viewfinder for capturing video.
privateVideoBrushvideoRecorderBrush;
// Source and device for capturing video.
privateCaptureSourcecaptureSource;
privateVideoCaptureDevicevideoCaptureDevice;
doublew, h;
// File details for storing the recording.
privateIsolatedStorageFileStreamisoVideoFile;
privateFileSinkfileSink;
privatestringisoVideoFileName
= "CameraMovie.mp4";
// For managing button and application state.
privateenumButtonState{
Initialized, Ready, Recording, Playback, Paused, NoChange, CameraNotSupported };
privateButtonStatecurrentAppState;

Hello,
I will help you moving this thread into windows phone forum.
For you question, we can use DeviceInformaiton class to find all webcams and then get the front or back webcam.
Code looks like the following.
var devices = await Windows.Devices.Enumeration.DeviceInformation.FindAllAsync(Windows.Devices.Enumeration.DeviceClass.VideoCapture);
Windows.Devices.Enumeration.DeviceInformation backCameraDeviceInformation =
devices.FirstOrDefault(x => x.EnclosureLocation != null &&
x.EnclosureLocation.Panel == Windows.Devices.Enumeration.Panel.Back);
You can see more about camera programming in this code sample. Get it from
https://code.msdn.microsoft.com/windowsapps/AdvancedCamera-ba47da27.
Feel free to let me know if you have any concerns.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

Difference between front and rear FW 400 ports

Hello:
I have a lab of 7 PowerMac G5's (1.8 MHz, single cpu, 512 MB RAM) We have a problem with one of them. Basically, an iSight camera does not work properly with the front firewire port. The problem is repeatable. Different iSight cameras show the same problem. The problem does NOT appear on the other six G5 computers.
Apple can not fix the problem. Now, they are telling me that this is normal behavior. I am being told that the iSight camera transmits a lot of data and the rear firewire port should be used.
This does not seem right to me.
So, my questions are:
1) Has anyone else had a similar problem with the front firewire port? Is the front firewire port limited in some way?
2) Apple's documentation seems to state that the front and one of the rear firewire ports are FW400. Is this correct?
3) If the iSight works on the rear FW port then why shouldn't it work on the front port?
4) If an iSight not working on the front port is "normal behavior", then why does it work on the other 6 computers.
All in all, I have a hard time believing this is normal behavior. I feels like I am being fed a "line".
I would appreciate any comments or insight that anyone might have.

The front port is FW400 and should work with the
iSight. Do you have any other FireWire devices to
try, such as a DV camcorder? If you have no other
FireWire devices, you could use one of your other G5s
in target mode as a test device to see if the port
works. If the port works with a camcorder or
computer in target mode, but not with the iSight, the
problem is probably with the power power connections
on the port. It is a six pin port but target mode
and camcorders only need four pins. The iSight has
to get power from the other two pins. In any case,
Apple should fix it.
Thank you for the tips. I agree that Apple should fix it. I have been informed, however, that since this is "normal behavior" that there is nothing to fix.

*** Front and Rear Firewire 400 Ports Share Same Bus? ***

I am wondering if the front and rear Firewire 400 ports are just linked together on the same bus, or do they connect to the CPU on separate channels.
- thanks for any wisdom.
Ted.

You are assuming that the FireWire controller is capable of something I've never seen confirmed, that there is 240MB/sec. And there isn't. I've created RAIDs on multiple FW PCI cards. I've used ATTO SCSI adapters.
And one thing I know about the old G4 was there is a maximum of 240MB/sec for ALL PCI slots that gets shared, not for each PCI slot, though there are adapters like FirmTek's Serial ATA SeriTek controllers which tend to "hog" all the bandwidth and limits the performance of or number of other controllers.
PCI-X was suppose to get past that by providing two buses, one @ 100MHz and the other @ 133MHz that keep them from 'stealing' the others.
PCI Express is an improvement (PCIe 2.0 is beginning to show up) but rarely do buses perform as well as they are suppose to on paper.
That can mean front side bus, memory bus, as well. The G5 memory bus never lived up to its expectations or white paper potential. The Mac Pro seems to have its own memory bandwidth limitations.
And I am not trying to cover up anything. Shed a little light, if not sunshine. More from testing and having talked to developers rather than an engineering background.

No sound from Front and Rear Center Speakers

Hi all,
I have a Creative 6.1 6700 speaker set + Creative Sound blaster Audigy 2 ZS.
Recently I have noticed that I am not getting any sound from my Front and Rear center speakers. The sound is being diverted to the sub woofer. Wehn i run checks the sound comes from the sub woofer rather then the speaker. I have checked all connection and checked all wiring. All Speaker are working fine and none is dead.
I have uninstalled and reinstalled the drivers and then application but still no good. I am unable to figure out why this might be happening. Any help is greatly appreciated.
Also any idea why does the creative driver keep on crashing. It is one of the most unstable driver that I have seen. I have the latest driver and usually keep it up to date but still it does keeps on giving problems regularly.
I have to say that till now the creative product has been a headache for me but I would have to make do with what I have. So all help needed here really.
Regards,
Amit

Hi Guys,
I would really appreciate if somebody could reply to my query. Its been very frustating here.
In the meanwhile I have done the following troubleshooting more :
1) Took a head set and connected to all ports at the back of the sound card. Sound is coming from there.
2) Went ahead and removed the creative drive and the application.
3) did a search in the registry with the keyword as "Creative". Removed all entries that were found.
4) Reinstaled the latest drivers and the application.
5) Tried he card ina different PCI slot.
But everything has been to no avail. There is still no sound from the rear and front center speakers. Its really driving me nuts.
It seems as if the souncard is passing the signal to the sub woofer but it is not directing it to both these channels.
Any help would be deeply appreciated.
Regards,
Amit

Front and Rear Audio Through only one Socket - Sound Blaster Live! 24

<p class="MsoNormal">PLEASE HELP ?
<p class="MsoNormal">I'm getting Front and Rear Audio through the front speakers (Front Socket), and nothing out of the back.
All cables are set up correctly; I have reinstalled drivers, updated drivers etc. and the software.
What?s going on ? :S

I'll answer you here, as I believe it may be helpful to other users as well... You will need to download the latest drivers for Li've! 24-bit under Vista, which are available [url="http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+Vista+32-bit&region=&Product_Name=Li've%2+24-bit&Product_ID=035&modelnumber=&driverlang=033&OS= 26&drivertype=0&x=29&y=0">here[/url]. These add AudioConsole, which allows you to select CMSS options for your soundcard.
amm44 wrote:
On Windows XP this was never the case, for surround sound I would leave it in Dolby mode.
This is indeed strange... In ProLogic mode, as I already said, it'sproduces?surround sound from the 2 front channels but this is not the same as discrete sound, which is eventually 6-channel analog or Dolby Digital. It really all depends on the content you are playing. Also note, that a lot of the Dolby movies available on the web, may use AC-3 format, but may still be stereo only. On this content ProLogig will produce nice surround sound. (Media Player Classic states clearly how many channels are actually available)?If you however playback a true 6-channel AC-3 movie and you have ProLogic enabled, you will most probably not hear any dialogue, or just its echoe... (Assuming that you leave the AC-3 decoding to happen on the soundcard, which will then send the signal through the 6 analog channels)?How is your soundcard connected to the receiver? SPDIF/Optical or only analog??

Front and Rear Artwork

Is there any way of displaying both the front and rear album covers in iTunes and can it be used with the cover flow application?
Thanks

AndEvs wrote:
If you can add both, is there a way of switching between them?
Not on the fly. But you can swap around artwork when you do a get info.
For example, if you have a song with two pieces of artwork attached, the first one is shown in coverflow. If you do a Get Info on the track, go to the artwork window, you can grab artwork #2 and drag and drop it into the #1 position and now that will show up in cover flow.
Other things you can do is the artwork that is first for the first track will represent the full album in coverflow. But, you can add alternative artwork to the other tracks or arrange them so different tracks have a different first artwork. When the song plays it will show which ever art work is first.
So for front and back artwork, you could arrange so that half the songs show the back and the other half show the front. And the first one will dictate what is shown for the group.
Patrick

S750 with interference on front and rear channels

I bought my Gigaworks S750 speakers with my X-Fi Elite Pro almost 2 years ago now, and up until about a month ago have been having no problems. Recently however there has been this really irritating interference coming through on the front and rear channels. It only seems to be occurring after the system warms up a bit (the sound is good when the system starts up), and it also doesn't seem to occur when using volumes under 50% (in windows). At first I figured that it was related to a new X-Fi driver that I had installed a week or so before the problem developed, and for a while was just trying different software things to fix it. Eventually I began to have a suspicion that it was the speakers. After checking the Creative knowledge-base, I unplugged the speakers from my PC, and used the Green, Black, and Yellow plugs in the headphone jack of my iPod to attempt to rule out the sound-card. Well, even when plugging the speakers directly into my iPod (so it definitely isn't the PC) the interference is still there, I have also tried swapping speakers around (to make sure it wasn't problems with the individual satellites) and it appears to definitely be an issue somewhere between the Front, and Rear channel inputs on the sub, and the front and rear channel outputs, where the satellites are plugged in. Seeing as it's been 2 years, my unit is out of warranty, so if I can possibly avoid shipping it to Creative for repairs, I would, but I'm not particularly good with electronics work (I understand capacitors, inductors, speakers, circuit-boards, and soldering, but am not confident working with any of that stuff). So if there is anyone out there with more experience than me, who has any suggestions as to what the cause might be, so I can somehow attempt to get it fixed without sending it away, I would be extremely grateful... not that I'm expecting much, but almost anything would be preferable than having to send them all away.

Hey guys, Andy, I looked around the top amp board like you said, found a few spots where the rubber stuff had been heat affected, and might have been causing short circuits. I carefully scraped it off, catching all the stuff I scraped off, and then tried to test it. Still no good. Just for the record, my capacitors are not the yellow ones, rather they are the large blue ones like in the picture. I bought these speakers to listen to music, not to learn how to fault-find on complex electronic circuitry. If there was a repair service offered by Creative for a price that is within reason, I would have used it with no second thoughts, but there isn't, and I feel that their customer support system overall is severely lacking. On the topic of the rubber vibration dampening material, I cannot believe that Creative has (and continues to) sell a product with a fault such as this! Surely a problem like their products developing short circuits due to materials chosen is something that they would have considered during the designing of the system, and once it became aparrant, they should have found an alternative material (if one exists) that would eliminate the issue. As is, I have a feeling that them selling this speaker system either breaks Australian Law, or comes extremely close depending on how you interpret the following:
As a consumer, goods that you purchase must:
be of merchantable quality goods have to meet a basic level of quality and performance given the price and description of the goods
Quote taken from: http://www.accc.gov.au/content/index.phtml/itemId/3863[/i]
Under the Trade Practices Act 974 you may seek a refund if goods:
are or become faulty through no fault of your own
Quote taken from: http://www.accc.gov.au/content/item.phtml?itemId=772827&nodeId=92efbf084ec5937343 f7965c5bab8f&fn=NFB_Warranties and refunds_desk sign.pdf
For a product they sell to develop short circuits (under conditions in which the system is supposed to function correctly, because a sub is going to heat up every time it's used) doesn't really meet a "basic level of quality" especially given the price of the goods! If you can classify leaving the speakers on for a period of a few days at a time, then sure, they became faulty through fault of my own. I however was under the impression that speakers were to be used, and that to use them they had to be turned on at some point, and that they should continue to function (within reason... like 5 or 7 years...) no matter how long they were left on.
I really am extremely tempted to follow this up, not because $600 means so much to me, but more because Creative has been selling this product with it's faults for a long time, and I really don't believe it is acceptable for them to do that, only offer a year warranty, and then expect us to pay almost the price of a new unit to get it repaired after that year.
Sorry to put you through a?rant. I didn't post this in your "successful repair of s750 with blown fuse" thread because it isn't relevant to anyone outside of Australia (athough similar laws may exist within your countries), and it would have been rude of me to spam in your very useful thread. However, if you do think it is relevant, and would like to to post it in the other thread, I can do that too.
As I said, I may, or may not follow this up, but I'm going to look into it, and I just hope Creative get the message that even though their product has great sound quality, the actually quality of the manufacture isn't acceptable
Andy, thanks for all your suggestions, I really appreciate your help.
Regards,
Tim
Message Edited by Energiser on 01-15-2008 05:31 AM

Front and rear cameras not working since i reformatted ipad mini. updated version. checked settings could not find how to activate camera. no icon appears.

i've searched and searched but could not find any answer why front and rear camera's aren't working.
i did a reformat because my id would not accept the password that i've been using. then after the reformat i could not see the icon anymore.
went to settings under photos and camera and could not find a button for the camera.
i do not have facetime. it's gone as well. what do i do?

Look under settings, general, restrictions and see if facetime and the camera have been turned off.

S750 Front and Rear Channels failed

My new (3weeks) Gigaworks S750 System's front and rear channels have failed. Only the side/center/sub channels play back sound.
For the reference the sub still plays the LFE on those channels.
If there is a fix, I will do it. If this is a defect, I am going to Logitech. Buying a $500 speaker system implies it should work perfectly.

Hi,
I hav got the same problem with my system. Check if you have put the Speaker Setup in 7.1 mode or not. To do this,
Control Panel > Sounds and Audio Devices > Click Audio Tab > Click Advanced button under Sound Playback to open Advance Audio Properties window.
Click Speakers tab > In Speaker Setup, select the type of speakers. In your case, select "7.1 Surround Sound Speakers". Try this and let me know if your problem got solved.
Rahul

Anyway to swap front and rear speake

Not sure if this should be here or in the speaker section.
I have an Audigy 2005, and Inspire 6. speakers.
The way I have my room set up, I have my computer on one side of the room, and my TV on the exact other.
I want to be able to have it so that the sound is coming from the front no matter what device I use.
ie When using the computer; speakers on that side of the room are treated as front, and when watching TV, I want to somehow switch it so the speakers on that side are treated as the front speakers.
i.e front left <-> rear right, front right <-> rear left, front centre <-> rear centre
Hope that you can understand this, I almost confused myself..
Thank you
Craig

I _think_ that you can set it up in one of the consoles so that it will switch it around, for further details though you'd need someone who has used the consoles
other than that all I can suggest is swapping either the speaker cables in the sub or the front and rear minijacks in the soundcard itself

Splitting Mini VGA signal between monitor and video projector??

Hello there,
I'm trying to develop an inexpensive tech setup for a classroom/lecture environment involving a mac mini. However, since the mini has only 1 DVI/VGA port, I am wondering how possible it is to split the VGA output and send it to both a VGA monitor (so the teacher can see what they're doing) and a video projector (so the students can see it) simultaneously.
In other words, the same screen content is sent to both display sources.
Can anyone recommend a reliable solution? I've researched 3rd-party VGA splitters to some extent, but am looking for some actual 'on the ground' experience doing this successfully.
Many thanks,
Richard

Thank you for your suggestion. I will look in to this.
I should haven mentioned that the video projector is ceiling-mounted at the back of the room while the Mini and monitor are positioned at the front of the classroom, so I am also concerned about lengthy cable-runs.
Thanks
Richard

Split signals between front and rear ports?

Similar Messages

Maybe you are looking for