SSL error black screen when using siri random volume when master is set on high iphone 5

my phone keeps saying SSL error and wont work on wifi or on the network i also cant send picture messages i really cant do any thing on the phone and the master vol is set on high and it randomly picks what ever leavl to go off on some times its loud and some times it dont ring at all i have also noticed that when i use siri my screen goes black i have resotred my phone using itunes and i have also exchanged my iphone5 for a different iphone 5 and am having the same problems any tips

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If you make an appointment with an Apple store for a consultation this is the first thing they will tell you to do. Hopefully it gets your phone working correctly again.

Similar Messages

BLACK SCREEN startup with 3 beeps, FREEZES when unplugged, Splash screen freeze, HEAT-UP TO BOOT

BLACK SCREEN startup with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-powe
Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears, and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling, so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B. I ended up changing a setting in BIOS from AHCI to Compatibility Mode, and I passed everything without the BSOD again. I have always had it on AHCI.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
BIOS:
Also, the time was set to 1988 or something in the BIOS.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the driver wasnt made for the system, or that it wasnt compatible or something, which was wrong. I made it work somehow, but it was still sluggish after install. I rolled it back to an earlier driver, and now it works fine oddly. No sluggish performance / slight freeze window thing going on. No problem at all.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1

T61-Elwood wrote:
Laptops of all Brands using Nvidia GPUsmade from 2007-2008 are faulty.
You wont get good Nvidia ones on Ebay/forumes anywhere.
I'd beg to differ on both accounts.
*61 series nVidia-based ThinkPads from late January through July of 2008 are a 50/50 shot, since the old chips were mixed with the new ones. Any machine built in August and later can be deemed "safe".
As for the forums (I don't do feebay) there are people who sell genuine, properly-tested planars. However, these do not come at bargain basement prices, and with a good reason if I may add.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

F.E.A.R. 2 black screen while using Soundblaster X-Fi

This is my second attempt to get some support for a problem that is plaguing many trying to play F.E.A.R 2 with a Soundblaster X-Fi. We have been on the official forums for WBGames now for the past two weeks asking for help. Many were able to find solutions by updating their codecs however there are many of us that still cannot get into the game. WBGames official response it as follows...
Dear, xxx
Regarding your sound acceleration error and the sound cards you have used, we apologize for the inconvenience you have experienced.
At the moment, we have been noticed that certain Creative sound cards (X-Fi, Sound Blaster and Audigy) and Realtek are presenting incompatibility issues with the F.E.A.R. 2 application. Unfortunately, Creative Labs have not yet released a patch to solve this situation, as other companies like Nvidia have worked on.
F.E.A.R. 2 is designed to function with Windows XP/Vista compatible graphics and sound cards. Drivers for these devices are provided by Windows itself or the respecti've card manufacturers and may occasionally result in incompatibility problems beyond our control.
If there is anything else we can do to assist you, please do not hesitate to contact us by email at [url=mailto:[email protected]">[email protected] m[/url] or by phone 080-0664-9456 (in Germany) during the hours of EST :00 pm - 0:00 pm, PST: 0am- 8pm MON-FRI.
Thank you for contacting Warner Brothers and have a great day.
Refund option
If you are not satisfied with the performance of this product on your PC, you may return it with the receipt of purchase to the store from which it was purchased within 90 days from the original purchase date for a refund.
If you purchased this product as an electronic download, please visit the following site for refund details:
[url="https://support.steampowered.com/kb_article.php?ref=4938-WTDF-9465">https://support.steampowered.com/kb_...4938-WTDF-9465[/url]
I thought that someone with creative labs would be interested in either responding or releasing some kind of a statement in regards to this.
The current problem for us is when we try to launch the game a small animated orb runs at the bottom right of the screen while the game loads. At the end of the animation we hear a small chime and the screen goes black as though it is about to load the intro videos. But we get nothing. The screen remains black. I have exhausted all of their solutions, I have updated drivers and tried the latest beta drivers from Creative. I have removed, replaced, and updated codecs. Video card drivers are updated, etc.
Basically we are faced with the following dilema. We can disable the sound card in Windows and the game plays however with no sound. We can run the game in safe mode which manually disables the sound card and the game plays but with no sound. Leave the sound card enabled and run the game in normal mode and we get a black screen.
PLEASE, can someone with Creative Labs respond to this? We are looking for answers and would very much like to play this game.Message Edited by djdouglas on 02-20-2009 09:39 [email protected]

Re: F.E.A.R. 2 black screen while using Soundblaster X-Fi?
solace wrote:
Pardon me but i'm looking your Quad SLI setup a potential culprit to your problems. Have you tried disabling SLI mode to see if the problem can be resolved?
That was my first thought when I encountered this problem. I took the steps troubleshooting video. Disabled SLI, Physically removed one video card. Updated drivers, etc. I am currently running the 82.06WHQL drivers which are suppose to be enhanced for F.E.A.R.2 and other games.
My next step was to try uninstalling codecs as their support team had suggested for people running into issues with the demo version (which btw worked perfectly for me). There were tons of reponses by the devs and community managers before the release of the game in response to people having issues (these same issues) on the demo. So they released a patch the day before the release of the game and when everyone installed the game the patch automatically installed. So for me and many others that enjoyed a smooth gameplay in the demo our rigs are now not working with the official release.
Since release we have yet to see a response or fix or suggestion from a dev. There have been many others in the community that have helped each other out by posting their solutions. For most updating their codecs using Klite or Ace Mega codec pack has fixed their problem but for a select few of us these solutions have not worked.
Basically I can launch the game successfully in safemode which disables sound. I can also disable the sound card and launch the game successfully although without sound. The codec that has seemed to be effecti've when replaced by others is the Microsoft IMA ADHCP codec. However for me I can disable that codec and get a hardware accelration error but still get a black screen. Re enable it and get black screen with no error. So I do not believe this to be the issue plaguing me. Ultimately it is coming down to a conflict with my sound board and the game.

The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.

The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video. When I open the app the screen is just blank. As it is a default app I can't delete and reinstall. Anybody else experience this?

Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
If that doesn't work then try closing the Videos app via the taskbar : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My iPad downloaded ios 8 and all I get is an unresponsive black screen with the logo. And when I reset it it goes to the page where it says hello in a bunch of languages then I try to configure it and my screen once again goes black. HELP!

My iPad downloaded ios 8 and all I get is an unresponsive black screen with the logo. And when I reset it it goes to the page where it says hello in a bunch of languages then I try to configure it and my screen once again goes black. HELP!

Hello Lesliegrande,
Thanks for using Apple Support Communities.
Please follow the troubleshooting in the article below to help resolve this issue where you are unable to update your iOS device.
If you can't update or restore your iPhone, iPad, or iPod touch
Take care,
Alex H.

How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

I have an iphone 4s why does it have a black screen instead of my background picture when I get a text message?

I have an iphone 4S why does it have a black screen instead of my background picture when I get a text message?

When you see the old number come up in the suggested choices look for a blue arrow to the right of the Contact. Tap the blue arrow and then tap Remove from Recents.

HT4623 Anyone have trouble with iPhone 5c when using Siri?

Anyone having with iPhone 5c when using Siri?

I have a problem when I am using the SIRI and have # contacto, for example mark with siri #995012607.

Having a connectivity issue with bluetooth in car only when using siri

Does anyone know of a fix for connectivity issues when using siri to dial a number when using bluetooth in a car? If the number is inputted manually then the call goes through. When asking siri to make the call, it starts to go through but then quickly disconnects. I noticed the problem soon after downloading IOS 8.

Apple has no fix for this. I have been in contact with Apple customer service, engineering, etc. for over 2 months now. Very disappointing, as it worked fine prior to iOS 8.0.

Firefox throws "This Connection is Untrusted" when using hostname, but not when using IP address

I am remotely accessing a website which has iFrame in it. The website uses https, but iFrame tag has "src" pointing to a site using http only. However, when I remotely go to the site, iFrame shows the message below although the ''src" url is http only (there is no SSL certificate) when I use IP address (https://10.10.101.156:8006/apprecovery/admin/Core/Storage) in address bar instead of hostname (https://hostname:8006/apprecovery/admin):
===
This Connection is Untrusted
You have asked Firefox to connect
securely to d37t50w1, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
d37t50w1 uses an invalid security certificate.
The certificate is not trusted because it is self-signed.
(Error code: sec_error_ca_cert_invalid)
===
Why is it giving this when using hostname but not when IP address is using?

Corrected first para above:
I am remotely accessing a website which has iFrame in it. The website uses https, but iFrame tag has "src" pointing to a site using http only. However, when I remotely go to the site, iFrame shows the message below although the "src" url is http only (there is no SSL certificate) when I use hostname address (https://<hostname>:8006/apprecovery/admin) in address bar. But I dont see the message in iFrame when I instead use IP Address (https://<IP Address>:8006/apprecovery/admin) to go to main website.

When using my MAC desktop, when I try to play a video on the Apple Homepage I just get a spinning wheel and it says "missing plug-in". What's the issue?

When using my MAC desktop, when I try to play a video on the Apple Homepage I just get a spinning wheel and it says "missing plug-in". What's the issue?

Yep. I installed Lion this morning. Open Mail. All is good. Went to video on the Apple's homepage and my whole computer froze up. I couldn't even shut down the computer properly. I just had to shut it off and restart. :|
Although, no "missing plug in" prompts were coming up for me. Just a frozen (brand new) iMac.

I am using outlook express for my mail. When using internet explorer on PC I could set it up so I could simultaneously see all my inboxes, the mail details and a message preview. Can I do this on my Mac?

I am using outlook express for my mail. When using internet explorer on PC I could set it up so I could simultaneously see all my inboxes, the mail details and a message preview. Can I do this on my Mac?

About accessing using a browser: I can get in using Firefox or Safari, butI cant set the page up to see all my inboxes at the same time (so I can file emails appropriately) or get a preview to save opening every mail

TS2771 on i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

On i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

The user guide says:
Movies viewed in Videos and YouTube appear only in landscape orientation. Street views in Maps
also appear only in landscape orientation.
Do you have the scree orientation lock turned on? If on there is a circular arrow icon with a padlock inside next to the battery charge icon in the upper right.

There was an error opening the database for the library "/Volumes/Aperture Master/Unknown/Aperture Pictures/Aperture Library.aplibrary". what do I do now?

There was an error opening the database for the library “/Volumes/Aperture Master/Unknown/Aperture Pictures/Aperture Library.aplibrary”.
What do I do now. I cant access the photos on the drive. The only option is Quit? what ??????????
Please help ready to throw computer and drive out the window. I have a deadline of next Tuesdaythe 11th.

Start Aperture while holding down the option and command keys. You'll get a Photo Library First Aid dialog as below.
Try Repair Database first. If that doesn't work, then redo the startup with option-command and try Rebuild Database. These repair processes can take a long time with a larger library.
If all that fails, you can try creating a new library from scratch and then try importing the old library into the new. This sometimes can fix problems that can't be repaired the First Aid way.
Also make sure the drive where the Aperture library is located is working properly. You can check it with Disk Utility app.

Random black screen while using

Hello!
I'm having some issues with my laptop. It is an Hp Pavilion DV7-1135nr. I understand this laptop in particular has been know to have a lot of issues, but I still wonder if anyone has a solution for this. Just recently my laptops hard drive died so we bought a new one, along with a new fan because that one was dying. We installed the new parts and everything worked fine for a while and then while I was using it it froze up and the screen turned black. I turned off the laptop for a while and tried it again about an hour and a half later. It worked for a while but it did the exact same thing. It was also doing this before we replaced the parts so we just thought it was over hearing from the cruddy fan. Apparently not, because it's still doing the same thing. If anyone has any suggestions on how to fix this, it would be greatly appreciated.
Thank you for your time.

Hi @Sycho56 ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Pavilion dv7-1135nr Notebook and getting a blank or black screen on startup. Try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
Here is a link to computer won't start for Windows 7. Windows 8 here.
Here is a document, for when it gets running, it shows you how to do a hardware test.
I recommend to restore the BIOS defaults with this document selecting the reloading the BIOS default settings.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

SSL error black screen when using siri random volume when master is set on high iphone 5

Similar Messages

Maybe you are looking for