ST-PI Components were deselected automatically

Dear all,
I am currently using Solution Manager 7.1 SP8 to generate the stack.xml for an application server, which will update from ERP6.0 EHP4 to EHP7 latest stack.
During the step "Select Stack-Dependent Files", I select all items of ST-PI and click "Continue". Afterwards, the following screen is shown and I can't continue.
Will there be any step to troubleshoot this scenario before I update the deselected patches manually?
Thanks,
Steven

Hi,
Try with the automatic selection instead of manual selection and under Log tab i think you're getting 10 log entries as well.
Confirm your SMSY or LMDB definitions for the system is complete or not,if possible share these errors also.
Regards,
Gaurav

Similar Messages

Oracle client and networking components were not found.

Hello, I've installed the oracle 9i Enterprise Edition, IIS, .NET framework 2.0 on a server, but when I want to open an aspx file i have this error:
Server Error in '/kinepolis' Application.
Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OleDbException (0x80004005): Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.]
System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection) +1054593
System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +53
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.OleDb.OleDbConnection.Open() +37
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
Do i really also need to install the client 6i on that server?
Can somebody help me?
thanks

Hi Guys,
I am wondering about this error as while I am using the same code to connect to the Oracle database server in my Windows program with Win Forms, the connection to the Oracle server is established and working fine.
But when I have tried to use it with Web Forms for my ASP.NET Application, it throws me out with these exceptions :
?ex.Message
"Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed."
?ex.StackTrace
" at System.Data.OleDb.OleDbConnection.ProcessResults(Int32 hr)
at System.Data.OleDb.OleDbConnection.InitializeProvider()
at System.Data.OleDb.OleDbConnection.Open()
at PMlitDocs_NET.checkMe.Button1_Click(Object sender, EventArgs e) in C:\Inetpub\wwwroot\PMlitDocs_NET\checkMe.aspx.vb:line 32"
Can anyone help?
Trush.

Oracle(tm) Client and Networking Components were not found..

I installed Oracle 9i Client tools on my machine (Win2000 Server), and successfully installed the Oracle ODBC Driver, however, upon using "Oracle in OraHome92" option in my Administrative Tools System DSN I receive the following error upon attempt to connect to the database with my ASP scripts:
"The Oracle(tm) client and networking components were not found. These components are supplied by Oracle Corporation and part of Oracle Version 7.3.."
I also receive the following error on my page:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
I have tried every trick I know and at this point am out of options. If anyone has a suggestion I'd really appreciate it.
Thanx
Phil

Hi,
I have been trying to setup Microsoft ODBC drivers on my Win7 64 bit laptop to work with my code.
Every time it gives me an error msg "Oracle(tm) client and networking components were not found"
ple help me in this. i have tried downloading and installing odbc driver from oracle site but none work.
Can someone guide me as which other software need to be install.
here is the connection string I am using, please help:
strDBConnString = "Driver={Microsoft ODBC for Oracle};" & _
"CONNECTSTRING=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST="&THostName&")(PORT="&TPort&"))" & _
"(CONNECT_DATA=(SID="&TSID&")));Uid="&TUserID&";Pwd="&TPassword&";"
Thanks

Common requirement_SSMA Runtime emulation components were not found on SQL Server, please check if Extension Pack is installed correctly

Greetings,
After the installation of the extension pack (local sql server and installed local) i get this warning:
Common requirement SSMA Runtime emulation components were not found on SQL Server, please check if Extension Pack is installed correctly
and
Common requirement SSMA Synchronization components were not found on SQL Server, please check if Extension Pack is installed correctly.
In the Program and Features Control panel the Feature "SSMA Extensionpack" (or similar) is installed and i see it in the startmenu.
what's wrong here, any hints?

Hi A. Bloise,
Based on your description ,we need to verify that the type and version of SSMA Extension Pack. Assume that you install SSMA for Oracle Extension Pack, I recommend you check the following things.
1. Make sure that the setup file of SSMA for Oracle Extension Pack is not corrupted. You can download it from
Microsoft Download Center.
2. Make sure that your computer meets the following requirements for the SSMA for Oracle Extension Pack.
    •SQL Server 2005 or higher.
    •Microsoft Windows Installer 3.1 or a later version.
    •Oracle Client 9.0 or a later version, and connectivity to the Oracle databases that you want to migrate.
    •The SQL Server Browser service must be running during installation.
3. Make sure that the account used to install the extension pack, is a member of the sysadmin server role on the instance of SQL Server.
If this does not work, please contact with SSMA support team for further help:
[email protected]
Thanks,
Lydia Zhang

How to deselect "automatically set up account" in Mail?

I have a new Mac book Pro OS X v. 10.6.7 and I don't have the option to deselect "automatically set up account" when I set up a new account in Mail. I have therefore not the option to say which type of account I want: IMAP, POP, etc. On my old MacBook this option was available.
Does anyone have an idea how I can still deselect this option so I can choose the type of account I really wish to have?
Thank you for any tip

Storminator from Lint wrote:
hello,
Changing from PC to Mac is a tough cookie! ...pfft...
Anyhow, I also have the same issue as described above, only that the so called "option" button does not appear on my screen. Result: i don't seem to be able to select this IMAP.
Any advice would be welcome (...have googled for some time, but also there: no clear indication on how to get around this issue)
best regards,
The Option Key
Is right .............here, in between control and command

Cant send mms messages. I get the error message: "one or more of the message components have been delted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset". This only seems to be an issue to iphones.

I cant send pic messages to iphone users. I get the error message: "one or more of the message components have been delted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset". This only seems to be an issue to iphones. I like this phone but have had nothing but trouble since day one. I am so tired of being on the phone with verizon and still not getting all the problems corrected. Someone please help!

Hello christina267,
Help is right here, front and center! Let's get your mms working properly. May I ask are you using the original stock messaging app to send texts and mms? Also, are you using any special characters or emojis in your message? Since you state that the issue is to iPhones, did you happen to have used an iPhone on your mobile number just before you were using the Galasy S 5? As you share the details then we can investigate.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

HT1277 How do I deselect 'automatically setup account' I do not see this option when clicking "Add account'?

I am trying to manually set up my email accounts using mail app on my imac. Mail wont find my exchange account automatically and I want to add them manually. How do I deselect 'Automatically set up mail'? I do not see this option when I click "add account'?

try mail help, there are a number of links there, as well as info on account set up. I have to run, so that's all I can check now.
Good
luck

It isn't right that U2 songs were added automatically to my iPad, especially as one must work to get them off ("hidden"). I don't like it at all, and I hope apple never does this again.

It isn't right that U2 songs were added automatically to my iPad, especially as it is not so easy to remove ("hide") them. I don't like it at all, and I hope apple never does this again.

Of course there is - maybe you didn't scroll down far enough?
Cheers,
GB

Mails were deleted automatically from inbox and sent items, even in deleted items in Exchange 2013 CU2

Dear all:
I encountered a problem and needs to be solved.
We runs Exchange 2013 CU2, and some users told me that their mails in sent items and inbox were automatically delivered into "deleted items", especially in last two weeks or yesterday.
The users said they cannot delete so many mails at one time. And now I found one user's mails in "deleted items" were also deleted this morning.
I don't know whether it was bug or not in exchange 2013 cu2, and how to solve this problem? Thanks for any help.
koiso
Technet Microsoft

Hi koiso,
Are there any commons among problematic users or deleted emails? For example,
they are on the same database
they have delegate settings
they are using mobile phone to sync emails
At the same time, I'd recommend you enable Mailbox Audit Log for the problematic users. For your reference:
http://technet.microsoft.com/en-us/library/ff459237(v=exchg.150).aspx
Regards,
Rebecca Tu
TechNet Community Support

Components were not consumed while posting the goods receipt through VL32N

Hi Experts,
We are into technical upgrade. We are upgrading from 4.7 to ECC 6.0. We are facing one issue. The issue is while posting the goods receipt for the subcontracting shceduling agreement through VL32N (Inbound Delivery) component materials were not consumed. While displaying the material document for the GR, could not find any compponent materials consumed with movement type 543, where as if I use the MIGO transaction code for the same inbound delivery, I could see the component materials were consumed with movement type 543.
Could anybody tell us how to fix this issue if they come across.
Appreciate your reply.
Regards
Bala

Hi,
Try checking below SAP notes
Note 645119 - Problems with subcontracting using delivery
338119 - Goods receipt in inbound delivery for SC order
Hope this helps
Reg
Dheeraj

Scheduled MRP run were cancelled automatically

hi guys!
i have scheduled MRP run in MDBT with variant MRP1,then when i run it,it was released but others have been cancelled automatically by the system.why?
kindly advise.
thanks,
crimson

http://www.sap-basis-abap.com/pp/mrp-run-exception-description.htm
http://www.sap-basis-abap.com/pp/problem-in-the-mrp-run.htm
Check this links may be helpful.
Regards
Ravi

Scheduled MRP run were cancelled automatically after released a new one

hi guys,
I've scheduled MRP run but when i realeased it, the previous schedule has been canceled automatically. Why is this happen?
Kindly advise.
thanks,
crimson.

http://www.sap-basis-abap.com/pp/mrp-run-exception-description.htm
http://www.sap-basis-abap.com/pp/problem-in-the-mrp-run.htm
Check this links may be helpful.
Regards
Ravi

How were the automatically playing animations in Apples The yellow submarine made?

Can anyone tell me what tools were used to build the animations for the yellow submarine book apple produced? I've looked around and people say it's JS but how do they get the JS into the book. And if it's not JS then what? I like the Hype app and the way in impliments widgets but I don't want the user to have to click on the animations before it begins to play.
PLEASE HELP.

Yellow Submarine (published by Subafilms Ltd.) uses Fixed Layout ePub which were introduced in December 2010 with iBooks 1.2. Fixed Layout books appear in the store with a minimum requirement of iBooks 1.x
iBooks Author books create a different file format and do not support the fixed layout ePub Read aloud narration features. iBA files appear in the store with a minimum requirement of iBooks 2.x
Books on creating Fixed Layout ePub: http://www.elizabethcastro.com/epub/
More reading:
http://authoradventures.blogspot.co.uk/2012/01/how-to-create-fixed-layout-ibooks -part.html
http://ebookarchitects.com/conversions/fixedlayout.php

Max Number Errors Reached but all components were successful

Hello All,<o:p></o:p>
I have a package in which I have an Execute Package Task that in turn controls a bunch of other packages. I have one (I have disabled all but
a couple others) where the entirety of the package appears to run successfully (all green) but the Execute Package Task itself is failing with the error "Warning:
SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure.
This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors." <o:p></o:p>
I increased the Max number of errors on the Execute Project Task "Load ARZ Demographics to Stage" to 100 but I still get the same error
-- Apparently, the max number it's seeing (1) is not on this task but I also changed the numbers of the package that this task calls. I am flummoxed as to where SSIS is seeing that the limit of 1 is set.
Thanks kindly,
Mike

Hello All,<o:p></o:p>
I have a package in which I have an Execute Package Task that in turn controls a bunch of other packages. I have one (I have disabled all but
a couple others) where the entirety of the package appears to run successfully (all green) but the Execute Package Task itself is failing with the error "Warning:
SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure.
This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors." <o:p></o:p>
I increased the Max number of errors on the Execute Project Task "Load ARZ Demographics to Stage" to 100 but I still get the same error -- Apparently,
the max number it's seeing (1) is not on this task but I also changed the numbers of the package that this task calls. I am flummoxed as to where SSIS is seeing that the limit of 1 is set.
Thanks kindly,
Mike
before this error there might be some warning messages posted in execution results page. Please post that. or else message with red mark (error msg) will be posted.
- please mark correct answers

All the songs in my iPod touch were deleted automatically. What should I do? Does my ipod have a problem?

Please help! I'm freaking out. This is like my third one and I'm not planning on buying another one. :(

You are being very sparse with information.
What was the iPod doing when it occurred?
Are apps you purchased still on the iPod?

ST-PI Components were deselected automatically

Similar Messages

Maybe you are looking for