Stacked Bar Navigation/Drill Down

Within my stacked bar graph, there are ~6 smaller bars that make up one full bar. How do I click on one segment of the bar and filter out requests only pertaining to that segment of the bar?
I'm counting the number of actions at specific stages within a process and I wanted to drill down into specific stages of the process to see which actions are currently at that stage?

Create a new request - Stage Info - set a filter to look for a prompt on stage
set that as the navigate to for the column that you are using for the stage bars in your chart.
clicking the bar will navigate you over to the other request sending along values that your new request is looking for.
Be careful when asking questions about navigation versus drill. Look at your column setting to see that there are different interactions a user can have with the data.

Similar Messages

Stacked Column Chart drill down

I have a stacked column chart. Data is dynamic. Sometimes one column will have 0 as value.
I need to do a drill down on the ones which has value. In order to do a drill down everytime, I don't want my drill down to be tied to a specific serie...
How can I do that?
Thanks,
Wen

Hi Wen:
Let me do a quick demo to you so you can learn how drill down for stacked column chart works
1. Create a new stacked column chart.
2. Choose data binding "By Range" and "Data In Columns" binds to range "A1~C2", which has range data as following:
a, 1, 2
b, 3, 4
3. After finishing step 2, there will be two series created (Series 1, and Series 2)
4. Open drill down tab and check "Enable Drill Down".
5. Choose "Insert Type" as "Row".
6. Click "Series 1".
7. Bind "Source Data" to range "D1~E2" which contains value as following:
11,12
13,14
(these are the drill down value you want to insert)
8. Bind "Destination" to "D3~D4" (empty cells)
9. Create another component "Grid" under "Other" folder.
10. Bind grid data to "D3~D4" to present the drill down data.
11. Preview the xlf file, can click values in series 1, you will see the drill down result. (Grid will be refreshed with new drill down data)
Hope the demo above can help you in your practice, also you can refer to help documents for more information. Let me know if you have any other questions!
Thanks!
Bill

Bar Chart Drill down getting "Insert in range overlaps with other series" # Error

Hi friends,
I am trying to drill down for Bar chart to Combination chart dashboard.
I have bar chart in region wise values are Revenue ,Net contribution,Total cost ,
So when i was binding for those values for one destination column could be same
in spreadsheet then its getting below error.
I tried formula for one destination to other columns
in spreadsheet also but that's not allowing to formula for binding destination .
Please kindly anybody help me out
Thank you
Sudhakar M

Hi Runali,
Sorry for late reply,the issue was not solved .
Got another issue in BI launch pad .
one Webi report migrated from R2 environment to BO 4.1.when open that report in BI launch pad
working perfect but when report was edit in the query level and run the all queries its asking context selection
If i selected all the context and run all the queries then again getting another issue.
Why its asking Query Context in Query prompt level?
Thank you
Sudhakar M

Alert with Query does not have orange navigation / drill down arrows

Hi Experts!
My Alert which uses a Query doesn't allow me to drill down into the document (Sales Order) . The Query for this alert is:
SELECT T0.[DocNum], T0.[CardName], T0.[DocDueDate] 'Due Date', T2.[TrnspName], T0.[U_PostCode], T1.[SlpName] FROM ORDR T0 INNER JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode INNER JOIN OSHP T2 ON T0.TrnspCode = T2.TrnspCode INNER JOIN RDR1 T3 ON T0.DocEntry = T3.DocEntry WHERE T0.[CANCELED] = 'n' and T1.[SlpCode] IN ('3', '4', '5', '6', '7', '8', '9', '17', '21', '29', '39') and T0.Address2 NOT LIKE '%'T0.U_Postcode'%' and T3.[LineStatus] = 'o' and T2.[TrnspName] Like '%%del%%' GROUP BY T0.[DocNum], T0.[CardName], T0.[DocDueDate] , T2.[TrnspName], T0.[U_PostCode], T1.[SlpName] for browse
Please can you help me on this?
Many thanks,
Caroline

Hi Caroline,
Try not to "group by" a query for alert with drill down.
Cheers

Report Navigation / Drill Down

I am anticipating building an OBI report based on the following scenario:
I have a database table with 15 columns. Column 1 is a product number. Column 2 is a unique lot number. Column 3 is a period name. Columns 4 - 15 are months JAN - DEC. This will be populated with a stock count figure. Only one of the columns, 4 - 15, will be populated. The rest will be null. (The months represent the period into which a lot has been graded). The period name given in column 3 will be correspond with whichever of columns 4 -15 is populated.
I intended to build 2 reports:
1. A summary report using column 1, then columns 4 - 15. Columns 4 - 15 will need to allow naviation into report 2.
2. A detail report using column 1 and column 2 (and maybe which ever of columns 4 - 15 is populated. i.e. COALESCE). So three columns in total.
The expection behaviour therefore, is that by clicking on one of the months in the 1st report - gives me the actual detail behind that figure, in report 2.
Both reports will be TABLE reports - not pivot.
Any suggestion on how I can do this - I don't think navigation will work?
Edited by: 934462 on 27-Feb-2013 05:15
Edited by: 934462 on 27-Feb-2013 05:15
Edited by: 934462 on 27-Feb-2013 05:16

Not really I thought,
My summary report has 14 columns. I need to show the monthyly bucketing for each product.
i.e
Product Name, Month1, Month2, Month3, Month4, Month5, Month6, Month7, Month8, Month9, Month10, Month11, Month12
Product 1 10 20 null 45 null 67 null 89 null 17 null 54
Product 2 23 34 null 57 null 69 null 12 null 34 null 36
So, I want to be able to click on say "89" - and see what lots make up that 89.
It appears to me this TABLE report doesn't have time as a dimension?
Edited by: 934462 on 27-Feb-2013 06:32
Edited by: 934462 on 27-Feb-2013 06:32
Edited by: 934462 on 27-Feb-2013 06:34

Each cell Navigation/drill down

INPUT METHODS-------- REJECTED---------------ACCEPTED
A--------------------------------- 12-------------------------34
B--------------------------------- 16-------------------------21
C--------------------------------- 10-------------------------4
D--------------------------------- 1--------------------------18
Each cell has to provide drilldown option. These Rejected/Accepted values are dynamically counted from database.IF the user clicks on a particular Rejected value (eg. 12 or 16), I need to list those 12 or 16 records breakup for each cell .
Thanks
chandra

hi
Create an Hierarchy where the Input method value be the parent level set the dimensional value as the logical level key and then set the Rejected and accepted as the child level in the same level and define accepted and rejected both as logical key in the same level
Check the drilldown box
Regards
Debo

Master detail view with drill down

I am trying to develop a simple app for my Ipad. This app is supposed to have a Master/details look and should behave similar to the native Mail app (2x levels of navigation and the last level updates the details view).
My problem is that I am not familiar to Apple IOS development so tend to get stuck all the time so I prefer to follow a tutorial or start with a sample project. I have searched for hours but I always either get a pure navigation drill down project without the details view or a pure master/details project with only a single level of navigation. I tried to take these projects and modify them but my knowledge sadly is very limited and I did not succeed.
So can anybody direct me to a tutorial or a sample project where a Mail like app is being built with more than 1 level of navigation ?

I have a GridBagLayout panel with a jtable and some jtextfield Well, we don't know exactly what constraints you have set up to its hard to say exactly why its happening.
In general, you should create your JTextField using new JTextField(int) and I think the problem will go away.
An easier solution would also be to use different LayoutManagers to achieve the desired layout.

Parellel Drill down

I have hierarchy like Vice president-> Area VP(AVP)->Area Manager(AM)->Community.
I have applied navigation drill down.I have created following reports
Ist report has VP column.(It navigates to 2,3, and 4 report)
2nd report has VP and AVP column.(It navigates to 1,3, and 4 report)
3rd report VP AVP and AM column.(It navigates to 1,2, and 4 report)
4th has Vp,AVP,AM and Communit coloum.(It navigates to 1,2,3 report)
The report is working fine. But I have requirement like
when I am on Ist report and chose 3rd report then it should give me all V
P with all AM's . Actually it should not show AVP column. Currently it is showing all VP's ,AVP's and AM's
Similar
if I am on 2nd report and if I chose 4th report then it should show me all VP's ,AVP's and all communities. It should hide my Am's columns. Currently it is showing me all VP's ,AVP's, AM's,communities.
Please how to archive this.
Thanks

Why not have another Report with just the columns you want? You add an icon or small message to each row which navigates the that other report.
Adrian
majendi

How to use drill down

Post Author: omaha
CA Forum: Charts and Graphs
How do you get a bar chart to function as a drill down chart? I've tried creating groups, but apparently there's more or something else necessary. I have 3 formulas, each summed at the group level, and I would like for the bar chart that is currently shown to function as a drill down, thereby I hope to make the report simply show the chart ... and if desired, the user can click on the bar of interest to them and see that particular detail.
Again, the values I'm summing are formulas, not actual values in the table.
Thanks for any help

Post Author: matthewh
CA Forum: Charts and Graphs
New to Crystal but I have a report that groups production jobs for the last 7 days by day, and then I have group summaries for them for a number of the fields some of which are formuas, and build 6 bar charts from them, with 'OnChangeOf' set to to the date group (GH1). Now when someone clicks on a bar it drills down and display's that day's jobs, which then have a drill-down to a detail on each individual job. Didn't design it like that - found it by accident this morning!
Hope this helps.

Double Drill Down

Hi
I have created a chart and when u click on the bars (about 15 bars) it drill downs to more information which is given on a pie chart. Now i want to make a drill down from the pie to give more info. I have done it using formulas in the xcel which is based on the two drill down selectors, however some information isnt being picked up for some reason.
Any Ideas?
Thanks

Hi:
What kind of formulas do you use?
I think the problem may be caused by the formula you are using, not all excel formulas xcelsius supports. For detail information you can refer to release notes.

Drill Down chart using a selector

Hi ,
Is it possible to use the drill down option with a selector? I have figured out dirll down and it's quite simple but I can't seem to get it to work when a selector is in use
Here is my requirement
At the top layer it should show the region data when I click on any one region it should provide me the Bar chart (drill down chart)without Industries data in that particular region
and also I have 2 filters as selector
one filter is labeled as forecast and contains the values Current , Past & the other should be the Year contains the values 2007, 2008, 2009
I have a Region Pie chart which should default show the values Forecast = All and Year = All
if I select the values from the forecast = Current & select the values from year = 2006 the pie chart should display the values according to the selection and even the bar chart(drill down chart) should display the values according to the selection
Please any one let me know how can I do this

Sirisha,
Emailed you the xlf file as per your requirement...
Sirisha's Requirement:
Ultimately what we want is to have a selector (combo box) which will have the choices: person A, person B and person C. Then when a person is chosen, say person A, a pie chart will display amounts for info X, Y and Z that pertain to person A. Likewise, if we chose person B with the selector (combo box), the chart would change to the corresponding info X,Y and Z for person B. Once we have a particular person's data up we would like to then drill down on a slice of the X,Y,Z pie and display the subcategories of information on a neighboring column chart. So, we have person A up, we then see their pie of X,Y and Z, now we click on the Z slice and we would like to see a chart with the detailed info for Z: Zsub1, Zsub2 and Zsub3.
-Anil

Drill down in query when structure is in use (in query designer)

Hi Guys,
I have a structure in a report. This report was created with a characteristics structure.
Now I have a problem like this for example:
Three company codes 1000, 1100.
Turn over 100000.
Now the report shows only the turn over for all company codes.
Company codes 100000
I thought the navigation / drill down for company codes will be automatically available.
I expected
Company code 1000 80000
Company code 1100 20000
Result 100000
Is there something what should be activated extra?
I a hierarchy mandatory for structures?
Edited by: saplaz on May 23, 2011 3:22 PM

Hi,
Either make use of hierarchy or make use of selection in structure.
create selections for all the compay code which you want to display in your query output.
Like make a new selection inside that drag and drop company code and select the value after that restrict it whith your desired key figure.
By following the above steps you will get the repective turnover of comapny codes against each other.
Hope it helps.
Regards,
AL

Drill Down between 2 stacked column chart with multiple rows.

Hi,
Can anyone please help me.
1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
to achieve this,
i'm using 2 stacked column charts and 1 lebel baseb menu.
from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
Becoz my data is multiple row for each quarter.
please suggest me to achieve the drill down between 2 stacked column charts.
assume that my data like below.:
coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
Region                Q2                Q3               Q4
Other              3658              3497               497
NA - North
America                3               3               1101
APJK     1     4     597
UK               324
EMEA North     1     1     288
CORPORATE     1     5     215
LA -
Latin America1     2     208
EMEA     1          199
EMEA South     1     1     169
Coulmns for 2nd coumn chart: Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
Region     Priority     Q2     Q3     Q4
Other     D: End of Next Day     1568     1613     239
Other     C: End of Day     983     893     119
Other     A: 2 Hour     631     610     70
Other     B: 4 Hour     396     318     56
NA -
North AmericaD: End of Next Day     2     2     514
APJK     D: End of Next Day          3     297
NA -
North AmericaC: End of Day               284
NA -
North AmericaA: 2 Hour     1          170
UK     D: End of Next Day               157
APJK     C: End of Day     1     1     152
Other     E: 3 - 5 Business Days     68     58     13
EMEA North     D: End of Next Day          1     136
CORPORATE     D: End of Next Day          4     107
NA - North America     B: 4 Hour          1     104
LA - Latin America     D: End of Next Day     1     1     86
EMEA     D: End of Next Day               86
UK     C: End of Day               85
APJK     A: 2 Hour               79
EMEA South     D: End of Next Day               72
EMEA North     A: 2 Hour               69
EMEA North     C: End of Day               56
APJK     B: 4 Hour               55
EMEA     C: End of Day     1          53
LA - Latin America     C: End of Day               54
UK     A: 2 Hour               49
EMEA South     C: End of Day     1          44
CORPORATE     A: 2 Hour          1     43
CORPORATE     C: End of Day               44
LA - Latin America     A: 2 Hour          1     42
EMEA South     A: 2 Hour          1     32
EMEA     B: 4 Hour               30
UK     B: 4 Hour               30
EMEA     A: 2 Hour               27
EMEA North     B: 4 Hour     1          26
NA -
North AmericaE: 3 - 5 Business Days               25
LA - Latin America     B: 4 Hour               23
EMEA South     B: 4 Hour               20
CORPORATE     B: 4 Hour               17
APJK     E: 3 - 5 Business Days               13
Other     F: 6 - 10 Business Days     6     4
Other     G: 11 - 20 Business Days     6     1

Hi Srinivas,
I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
for mor details:
1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept.

Bar Chart with Drill Down

Hello,
I have BI Publisher 11 and BI Desktop version installed.
I created a Bar chart thriugh RTF template and uploaded, its working fine.
I want to create a drill down on each bar in the chart, which will allow me to pass respective value and open a detail report for that Bar value.
Has anyone tried it?
Any pointers would be highly appreciated.
regards
Nikhil

Hi Runali,
Sorry for late reply,the issue was not solved .
Got another issue in BI launch pad .
one Webi report migrated from R2 environment to BO 4.1.when open that report in BI launch pad
working perfect but when report was edit in the query level and run the all queries its asking context selection
If i selected all the context and run all the queries then again getting another issue.
Why its asking Query Context in Query prompt level?
Thank you
Sudhakar M

Is their any tutorials on how to make a navigation bar with drop downs in Dreamweaver CC now ?

Is their any tutorials on how to make a navigation bar with drop downs in Dreamweaver CC now that they do not have the spry option?

bbull2005 wrote:
Preran, why wouldn't Dreamweaver include it's own menu/navigation bar widget?
I can't answer on Preran's or Adobe's behalf, but I think you'll find at least part of the answer here: http://wiki.jqueryui.com/w/page/38666403/Menubar
Adobe decided to discontinue development of Spry in August last year, and Dreamweaver CC made the switch to using jQuery UI widgets and effects. One reason for dropping Spry was that it failed to work correctly in some browsers. Judging from the fact that the jQuery UI menubar is now "on ice", creating a flyout menu that works reliably across all devices is proving more difficult than originally envisaged.
Because all other widgets in Dreamweaver CC use jQuery UI, it's a reasonable assumption that Adobe hoped the jQuery UI menubar would be ready in time, but it wasn't.

Stacked Bar Navigation/Drill Down

Similar Messages

Maybe you are looking for