Standard instead of ws_policy in url WSDL

Hi,
I would like to know if is there any way to get the wsdl with standard instead of ws_policy throug SOAMANAGER without do it manually.
I mean that I can get the WSDL standard if I change ws_policy by standard in the WSDL url. I would like to know if another way exist due to I have to do it for each WSDL file.
Thanks
Regars

Hi.
That's how we created wsdl files in XI 3.0.
Tried it in PI 7.11 and wont get the web service to work at all with that metod.
BR
Kalle

Similar Messages

How to make firefox remember the main web address of each website instead of it remembering URLs history?

Whenever you visit a website such as youtube.com and have searched for videos on the site, firefox remembers all these URLs the next time round you attempt to type youtube.com into the address bar. I find it frustrating because all I want to see is a neat list of websites beginning with the letter 'y' when I begin typing 'youtube' such as youtube.com or yahoo.com, etc. I don't want to see everything else otherwise it just looks messy - you end up having to click on one of the URLs to get to the site again or you end up retyping the main address out yourself (some main web addresses are long!).
Is there an option in firefox where you can have it only remember the main web address of the sites you have visited instead of all the URLs visited on those sites? I'm not talking about deleting the entire history, just for the address bar to remember a simple list of sites such as google.co.uk, yahoo.com, youtube.com, outlook.com, etc.
If something like this doesn't exist then I wish someone would give us the option to do that.

Pick a page you like for that site, then bookmark it. In the future,
just select the bookmark.

Create Resource from URL (WSDL) through corporate proxy?

In OSB I Create a Resource from a URL (WSDL) but I get a "No resource found".
Im using this service to test...
http://webservicex.net/stockquote.asmx?WSDL
I suspect its because it needs to route though our corporate proxy. Do I set this up in the OSB or the Weblogic Administration Console?
I setup the proxy in the OSB, but it appears I can only assign it to a business service at this point, but I cant create my business service till I load in the WSDL url.
This works fine for internal WSDL's inside our network. Does anyone know how to configure weblogic or osb to take traffic through a corporate proxy so it can find the test wsdl on an external network?
Thanks!

Hi Cory,
In SB Console go to System Administration > Global Resources > Proxy Servers... Add a new proxy server there...
In your Business Service you configure the proxy server under Advanced HTTP Transport Configuration...
You can create the WSDL on SB Console by copy and pasting the WSDL content...
Hope this helps...
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc

Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc.. Please Help!

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Firefox website shortcuts only open to my homepage instead of the correct URL

so i have a windows 8 laptop that i had installed firefox on. i have a few shortcuts to websites like youtube, facebook ect. However when ever i open them it just opens up to my homepage which is "google.com" instead of the correct URL.
The same issue occurs with any other browser like IE but im going to be using firefox that's why i asked on this forum.
the computer im asking the question on is not the computer that im having the issues on.

Does this only happen when Firefox isn't running or also when you already have a Firefox window open?
Make sure that Firefox is set correctly as the default browser.
*https://support.mozilla.org/kb/How+to+make+Firefox+the+default+browser
*https://support.mozilla.org/kb/Setting+Firefox+as+the+default+browser+does+not+work
*http://kb.mozillazine.org/Default_browser
You can check for problems with DDE.
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

Footer of printed page shows local drive path instead of the webpage url

When I print any webpage in IE10 in Windows 7, the footer contains a file path like file:///C:/Users/username/AppData/Local/Temp/Low/80S1TSTK.htm instead of the URL of the webpage I am printing. In the Page Setup settings of Print Preview I have chosen to
print the URL in the footer. This started happening after I reinstalled Windows when my computer got infected.
I have tried the following but I still have the problem.
In my registry I went to the path HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\PageSetup and made sure the footer value is &u&b&d.
When above action did not fix it, I reset Internet Explorer (http://support.microsoft.com/kb/923737). The problem remains. It is still there after IE automatically updated to IE11.
Any help will be appreciated.

Hi,
The issue may be caused by any add-ons. So I recommend you run IE with no add-ons firstly.
Click Start -> All Programs -> Accessories -> System Tools -> Internet Explorer (with no add-ons).
If back button works, please follow the steps to narrow down which add-on cause the issue.
Start IE>Press Alt to show the menu bar>On the Tools menu, click manage add-ons>under show, click All add-ons>disable half add-ons one time for quick narrow down>restart IE.
If it is not the case, try the following steps.
1. Delete your browser history.
Start IE>Press Alt to show the menu bar>On the Tools menu, click Internet options>Under Browsing history, click Delete>Select all the check boxes, and then click Delete>restart IE.
2. Try resetting IE settings and check the “delete personal files” settings.
Start IE>Press Alt to show the menu bar>On the Tools menu, click Internet options>Advance>Reset>restart IE.
3. Maybe your computer got infected with virus.
Go to the Microsoft Safety Scanner webpage to download the scanner and then follow the instructions on the screen.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

When I open a second Firefox browser window, the URL address window, instead of showing the URL, says "Go to a Web Site;" also, and more importantly, the "back" button is greyed out. This is a new problem, and the first Firefox window I open works fine.

After I open the first Firefox browser window, any additional window I open does not open my homepage, but opens a blank page with "New Tab" showing on the tab. An orange "Firefox" tab with a drop down arrow shows at the upper left hand corner of the screen. All of the options (File, Edit, etc.) are greyed out, however they will work if you move your cursor over them.
The URL address window says "Go to a Web Site". After I've gone to a website, the back button remains greyed out and I am not able to go back to a previous page. My RoboForm and Netcraft toolbars only show up in an abbreviate form. The add-on bar doesn't show up at all.
Again, this is a recent problem, and only happens after I've opened one browser window (which works fine) and then open additional browser windows (as few as one additional).

I had this same problem. Seems to be caused by the web developer tool bar FF extension (this started happening after a recent update to that extension). After disabling it, my FF is back to normal :)

Using TEDS as storage for precision standards instead of transducers

My company makes and calibrates precision resistance, capacitance and inductance standards. These are not transducers, yet they posess calibration data that would benefit from 'internal storage'. Some data could event be represented as a polynomial or a table (capac vs. freq; resistance vs. temp)
Is there a standard like TEDS for 'source' components; or could TEDS be used to create a built-in datasheet? (Call it "SEEDS", Standards Equipped with Electronic Data Sheet ;-) .
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Hello,
As of now, if there is such a standard, I am unaware of it. However, there may be a way to do something like this using TEDS. The IEEE 1451.4 (TEDS) standard does include an optional calibration section where different types of calibration data can be stored. So you may be able to utilize TEDS to store information about the resistors/capacitors/inductors. However, National Instruments software does not currently read in the calibration information and automatically process it.
Something else that could be considered is that along with the calibration section there is a user data section in TEDS format that allows the placement of ASCII data.
Also, with NI-DAQ 7.2, you have the ability to read in a bitstream from a TEDS sensor. So it is also possibl
e to develop your own format and read in the binary information and process it using LabVIEW. However, you would have to understand IEEE 1451.4, and how to write in the proper checksums, and then create your own TEDS sensor, but I do believe it is possible.
Interesting Idea! Keep them coming!
Justin T.
National Instruments

Partner Link URL/WSDL or Dynamic Partner link

We are using a service similar to CreditRatingService in orderBooking Tutorial as a partner link.
The partner has different test vs production service.
I was wondering during deplyment on production is it possible to specify the URL in config file or do I have to change the designtime location in jdev and then deploy it in prod.
Can experienced folks here point me to deployment best practices ?
Part2 : Where does dynamic partner link fit in ?

JDeveloper is using ANT and is using a properties file during the compilation. You can change the properties when you want to deploy.
http://orasoa.blogspot.com/2006/08/using-ant-in-bpel-environment.html
Dyn PL are usefully when you want to call multiple/various web services that all take the same payload, but are using different end-points and operation. This reduces the code to make for every interface an PL.

Form open through IP Address instead of Servername in URL !

Hi all,
We have forms 11gr2 64-bit with JDK 7 update 9 on server and JRE 7 update 25 on clients PC.
I m facing problem in one of my client's PC. Please note following;
http://svr:9001/forms/frmservlet?form=new, it doesn't open my form and shows error.
http://192.0.0.1:9001/forms/frmservlet?form=new, it open my form successfully without any error.
i.e. when we enter Name of server in URL, it doesn't open my form. But when we enter IP Address of server, its ok.
We have to use Name of Server, as it is defined in global variable, which is used to open Reports. As such, if we use
IP Address in URL, it doesn't open reports at all.
This problem occurs in one of my client PC, other client PCs are OK.
Please guide !
Thanks/Regards,
Dass.

Hi
as Sham has explained, but in the "hosts" file on the local pc not the server and also the other way round
ie
srv 192.0.0.1
It's the local file which will be used to translate the name "srv" into the IP address of "192.0.0.1" for the local pc network software to be able to "look out" to that address.
So that when you request "srv" the "hosts" file can be inspected and the IP address of "192.0.0.1" returned as the translation
Rod

WSDL 'portType' can not have child 'wsp:Policy' of

hi experts,
I get this error message. What is wrong can you give me pls. an advice
to solve this problem.
Cannot download WSDL from http://treman:8000/sap/bc/srt/
wsdl/bndg_DDBAF5E4EC01D5F193F7000C29210034/wsdl11/allinone/ws_policy/document?sap-client=100:
WSDL 'portType' can not have child 'wsp:Policy' of namespace 'http://schemas.xmlsoap.org/ws/2004/09/policy' !

Dear SAP User and Developer,
are you saying there is no other possibility to change the the port type besides
the way with using "standard" instead of "ws_policy" in the URL.
I think there must be existing another solution.

Web Service Client Generation on 7.10 SP3 - No WSDL URL is specified....

We have a mysterious problem here.
In out ABAP system we had a WebService created. With "New - Web Service Client" we created a web service client on the java side for that one and we were able to invoke it.
We had to recreate this Web service due to wrong naming conventions. And now the problem starts.
In the Main service class we had before something generated by NWDS:
private static java.net.URL SERVICES_SERVICE_WSDL_LOCATION = null;
static {
    java.net.URL url = null;
    try {
          java.net.URL tmpUrl = Thread.currentThread().getContextClassLoader().getResource("wsdl/com/sap/document/sap/soap/functions/mc_style/sap/bc/srt/wsdl/bndg_001279D063121DECA58AC5F7200DC55D/wsdl11/allinone/ws_policy/document/rootwsdl_SERVICES.wsdl");
          url = new java.net.URL(tmpUrl.getProtocol(), tmpUrl.getHost(), tmpUrl.getPort(), tmpUrl.getFile());
    } catch (java.net.MalformedURLException e) {
      e.printStackTrace();
    SERVICES_SERVICE_WSDL_LOCATION = url;
After the new creation with the new Web Service this static initializer is gone an we see:
private final static java.net.URL SERVICE_WSDL_LOCATION = null;
This code is ridiculous, to make something static final and set it to Null. And as expected at runtime it results in WebServioceException telling us:
No WSDL URL is specified for service [class com.sap.document.sap.soap.functions.mc_style.Service] on service creation.
Anyone knows what is going wrong here??
Best regards,
Frank

Same problem here.
From Netweaver dev studio, I'm generating a deployable proxy for a Session Bean that is supposed to access a webservice but I keep getting the exception:
"Caused by: javax.xml.ws.WebServiceException: No WSDL URL is specified for service [class eu.socrades.sap.ServiceMonitorBeanTESTService] on service creation.
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.<init>(SAPServiceDelegate.java:108)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createDelegate(CTSProvider.java:170)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createServiceDelegate(CTSProvider.java:151)
at javax.xml.ws.Service.<init>(Service.java:57)
at eu.socrades.sap.ServiceMonitorBeanTESTService.<init>(ServiceMonitorBeanTESTService.java:14)"
I'm injecting the reference to the service with:
@WebServiceRef(wsdlLocation = "rootwsdl_ServiceMonitorBeanTESTService.wsdl")
private ServiceMonitorBeanTESTService service;
I tried changing the location to a URL (where the wsdl can be downloaded from) or to "META-INF/wsdl/eu/socrades/sap/rootwsdl_ServiceMonitorBeanTESTService/rootwsdl_ServiceMonitorBeanTESTService.wsdl" but that did not help.
Any clue?
Thanks a lot,
Dom

When accessed from Firewall, the OSB WSDL is inserting schemalocation with HTTP port instead of HTTPS

We have OSB service and we are able to access over firewall. Also the WSDL, Schemas etc., But when we external users access the WSDL, they are not able to get complete content i.e schemas are not imported.
Reason is WSDL has http (<import schemaLocation="http://test.com:80/xxxxxx/Proxy/schema") with port no 80 instead of https (<import schemaLocation="https://test.com/xxxxxx/Proxy/schema") .
Since we don't specify the complete schema location in WSDL, how does WSDL include the complete schema path? And how to change it https path instead of http?

Namaste,
Sorry for the delayed response.
Yet, my one query is not answered.
Q:Are you ABLE to get the Desired path in Endpoint URL(https) as well?
Explanation:
What I mean is, When the external users access the WSDL (I am assuming External Users are able to access WSDL through Firewall),
As you have mentioned that XSD imports have HTTP instead of HTTPS, but how about the soap:address location? Even this points to HTTP instead of HTTPS?
(Ex:
<wsdl:service name="CaduceusSiteService">
    <wsdl:port name="site_pt" binding="tns:site_pttBinding">
        <soap:address location="https://www.test.com/test123"/>    ---> is this HTTP or HTTPS?
    </wsdl:port>
</wsdl:service>
BTW, did you set, HTTP Transport Configuration --> HTTPS required parameter to "YES"? (This is a prerequisite).
We had a similar issue, where we had HTTP instead of HTTPS when WSDL accessed from Firewall.
However, after lot of struggle, we got it worked after changing Firewall (MS TMG) settings to support for "text/xml".
I think, it could be the same settings needed to done in your case too. Please do check the firewall settings.
Thanks,
Nagaraj Ganapa

How can I be able to add url link in the standard text

Hi expert,
I want to add a url link in the standard text.Please guide me how can i be able to do that.

Hi experts,
I findout that there is no option in the standard text to add a url link and i findout the solution also we can create text module sepreatly ,here we can add a url link and then add in the smartfrom.In this way the user only can edit the text contents of the samrtfrom without seeing ht settings.
Thanks everyone for help.

Images print URL instead of image

I have developed crystal report which shows multiple images(stored as URL pointing to Unix box location where images are placed). Same is publised to Infoview where i can see the images properly.When i am printing the images,its not printing the image instead just showing the URL.
Please help how to resolve this.

--Which viewer you are using to Print ? ( DHTML, ActiveX, Java ?? )
--Whatever viewer you were using, can you change it in 'preferences' and see if you get same error in toher viewers?
--Are you flexible in using Printing the report after it get exported to PDF ? If yes, you can use this setting from CMC ?
--If you export the report to PDF and print from Infoview, does the images print fine?

Standard instead of ws_policy in url WSDL

Similar Messages

Maybe you are looking for