Static while recording

I am having problems with GB when recording with either USB or a regular mic. It happens at the start of the program or while recording a voice-over. Any ideas?

You'll have to tell us more about your setup.

Similar Messages

Static when recording through usb

I've been using line 6 gearbox to record a line 6 pod xt live directly into the usb port of my macbook. however, while recording in garageband '08 i will get this short period of static that lasts for about a few seconds and seems to come and go every minute or two. I've tried using a different usb cable and trying the two different ports as well. I'm think my pod xt live is ok, so i'm not sure if the problem is a hardware issue with my macbook's usb ports, or if it's a software issue with garageband. Has anyone encountered anything like this? Any help woul dbe appreciated. thanks!

I have the same microphone and am experiencing the same problem, though the frequency varies. Sometimes I can record for more than an hour with no static, and at other times, within minutes of rebooting the driver. I am still running Tiger. I've taken to unplugging my microphone when not in use. That seems to cut down on the frequency a bit.

Screen freezes while recording video.

Screen freezes while recording. I'm recording a video from Safari 7.1 using Quick Time Player 10.3 in OS10.9.5. The picture freezes after about an hour and a quarter. I'm using SoundFlower to capture the audio; the audio continues to flow and record while the picture remains static.

Hi again, I have found a solution for this! Go to the video in your iTunes library, and right click. Go to "Options" and then uncheck "Remember playback position". Once I did this the videos all played fine on my iPod.. they just won't keep track of where you left off. Hope this helps you both as well!

How can I use zoom while recording on my iPhone 4S?

How can I use zoom while recording on my iPhone 4S?

Christina_319 wrote:
How can I use zoom while recording on my iPhone 4S?
You can't change the zoom while recording.

Split Tracks While Recording w/MediaSource Play

I'm converting some cassettes using MediaSource Player. Can I split tracks while recording, i.e. record the whole cassette and then split that into individual tracks? I've done that with Microsoft Plus!, but can't seem to find that functionality with MediaSource. Also--if I want the absolute best quality recording of the cassettes, am I right in thinking I'd select WAV stereo, w/96.00 kHZ and 24 bits? The cassettes are li've recordings that I'd like to?have professionally mixed in a studio and then released as CD's, so I need the optimal "starting point" as far as the digital files are concerned. Thanks for any advice.

Yes, recording at 24/96 wave is the best that you can go with.
If you have one of the Creative sound cards, check whether you have the Creative Smart Recorder application. It has a split track function.

Error message while recording a vocal track

While recording a vocal track through a mic attached to a MOTU interface it will record a little then an error message comes up saying "Error while trying to sync audio and midi" I've tried changing buffer size anything else?

Hi Anamika,
If you are running your query in Web Portal, it seems your web portal is not defined in RFC connection with system. Ask BASIS to connect it.
Also, You can run your report in RSRT with ABAP Web option and check if it is working on ABAP engine.
Regards,
Harpal
Edited by: Harpalsinh Gohil on Aug 17, 2009 2:53 PM

Error while recording bdc for F-02...........

Hi,
     I m doin BDC recording for tcode F-02, i m getting a pop-up screen stating as, Coding Block ...asking Transaction type....
      This pop-up apperas only while recording, if i extend G/L without recording i m not getting this pop-up and the G/? will extending directly...
      With this my flatfile getting mismatched and getting error while uploading....
Give me any slovable solution for this.....
Thanks,
BDK....

Wrong question, Solved by recording....

Callers say my voice turns to static while on a call. LTE related? iPhone 6-AT&T

Callers often tell me my voice turns to unrecognizable static while on a call. This is an iPhone 6 on AT&T. This usually happens anywhere from a few seconds to a minute into a call, and is very frequent, upwards of 40-50% of calls. Happened on the last 3 calls I just got today, hanging up and calling back clears the problem. This is not acceptable when you run a business and get 30-50 calls per day.
When this happens I continue to hear the other party fine, however they typically say, "I can tell you're talking but I can't understand anything you're saying". Signal strength is fine, I'm 800 feet to the nearest tower. Went to Apple store, guy said there was an unusual amount of S/W errors on the phone, they had me do a complete software reinstall. This did not fix it.
Called AT&T, they analyzed the nearest tower for errors and found a possible issue with LTE at that location, but they were not sure. Coincidentally the guy at the Apple store told me to try turning off LTE. This might be a cure because it (so far) hasn't happened while LTE is off.
Anyone else had this? Suggestions?

I did try setting LTE to Enabled and Data Only but I still had the problem. Seems so far that LTE needs to be completely off or else the phone's outgoing audio often becomes badly corrupted. I'm still trying different settings but it's hard to do when you run a business.

Some fields are missing while recording through shdb

Dear Abapers,
I am doing bdc for F-27 t.code.Some fields,cobl-gsber(business area),cobl-kostl(Cost center) are missing while recording through SHDB.But when do it manualy the fields are displaying.Also i have ddded those fields manualy in the program,stll the fields are not getting captured.May anyone pls help me,why this problem is happening?What is the solution for this.
Thanks in Advance.

hi
i can tell u that few transactions wont suffice us with BDC,so for such transactions we do bdc with similar kind of transactions.
ie., The transactions FB60 and f-63 both are meant for Parking.
But we cant do bdc for FB60 Parking. So we do bdc for f-63.
similarly when we do bdc for vendor few fields wont appear...in that case, we use bapi for it....
So try to find an appropriate bapi or similar tcode which will suffice ur need
hope its clear.
Regards
Sajid

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

Can we take photos still while recording videos on iphone 4s on ios 6??

Can we take photos while recording videos on iphone 4s using ios 6??

1. Open the camera app.
2. Move the slider from in the bottom right from photo to video.
3. Begin recording your video.
4. While your video is recording, tap the camera icon in the upper right to take a photo.
5. You'll see the shutter close on your screen each time you snap a photo.
6. Your photos will be saved to your camera roll.
Edit:
Just noticed you have a 4S...iPhone 5 only, sorry.

Battery problem while recording videos.

I got my ipod touch 5 1 month ago. I got a problem while recording videos. The battery was around 40 percent, but after I recorded a video for about 1-2 minutes. The 20% was popup, then it turned off automatically. While I turn on it, the battery will be about 30 percent. It happened several times. Is this normal?
Does anyone have the same problem?
Thanks!

Hi,
Please refer the below link...
http://www.sapfans.com/forums/viewtopic.php?f=27&t=20842
Kuber

While recording videos in iPhone 5, I am not getting sound playback.

While recording videos in iPhone 5, I am not getting sound while playing it. How to resolve this issue? Please help. Thank you.

Hi manu1982,
Welcome to Apple Support Communities.
It sounds like your iPhone has a no sound from the speaker issue. The article linked below provides a lot of great troubleshooting tips that may be able to resolve the issue.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
I hope this helps.
-Jason

Stereo Audio Record problem (While recording video as well)

Hi,
I just just bought Sony Xperia C3 dual yesterday. I'm having problem with audio recording. I installed the Sony audio recorder from Google play store but while recording in stereo mode with it the gain suddenly drops after 1/2 second(s). Same problem while recording a video with stock camera app as well, video quality is fine but the audio with it is,just worst. Tried third party app like regorge pro but faced the same problem. Tried disabling the AGC with it, but no good. Recording in mono mode just works fine and I get clear record.
Any solution?
Thanks.

@uliwooly This one i recorded today morning. The audio starts good & clear at the begining but just after one second it drops & then you can hear the bus engine sounds like waterfall. Here is the youtube link https://www.youtube.com/watch?v=5H1jNxyYMlw Here's another video uploaded by a review site with the same problem https://www.youtube.com/watch?v=z3vKwydfN6U & more from youtube https://www.youtube.com/watch?v=-GLLj2ommP4 then i used a third party audio recorder with mic switch option https://www.youtube.com/watch?v=D6d4uAEZFRE as usual with the rear mic the gain suddenly drops after second & you can hear some weird sounds like a "movie bomb" sound at 00:04, "rattle snake" sound at 00:05 & 00:12 & with the front mic starts at 00:17 you can hear the difference. It's mono but so clear & sharp. Finally, as i dont have the mic swith option while recording video, all videos i record will have the same problem. This is definitely not the typical "sony" thing to carry on.

Is there a way to place markers while recording?

Is there any way to add markers to a GarageBand project while recording it? If there is not, is there a way to ask Apple to add that feature? On another note is there another Apple product that has that feature (such as Logic Express or Logic Studio)?

victoriafromsioux falls wrote:
I realized from your reply that I had to actually use a podcast recording rathar than just a voice recording
it actually doesn't matter what type of project you create, as long as you "show" the podcast track

Static while recording

Similar Messages

Maybe you are looking for