Status is reset on UCMON

Hi,
I have a situation on BCS tcode UCMON that all the tasks status were reset to intial stage,eventhough most of them are already completed. I am not really sure what's triggering this to happen as I cannot reproduce this error. However data calculated from the task process is still there, only status of UCMON is changed automatically. Pls help...Thanks in advance.
Regards

Denny,
we had a similar issue, but it was not on the top level of the UCMON, and it was Master Data related.
We have a time dependent hierarchy processing with company codes under it. Say, we ran through the monitor for processing for Jan - June and closed the period. We would have the following (with Status):
Processing   Green - Closed/Locked
- CC10       Green - Closed/Locked
       PC1      Green - Closed/Locked
       PC2      Green - Closed/Locked
       PC3      Green - Closed/Locked
       PC4      Green - Closed/Locked
After adding PC5 for January (by accident), the following status change occurred:
Processing   Yellow - Incomplete
- CC10       Yellow - Incomplete
       PC1      Green - Closed/Locked
       PC2      Green - Closed/Locked
       PC3      Green - Closed/Locked
       PC4      Green - Closed/Locked
       PC5      Gray - Not Started
So, all the results were there, but master data changes affected the monitor.

Similar Messages

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Maintenance Transaction - Status was reset by system

Hi,
I started the "Maintenance Transaction" under <Change Management - Maintenance Optimizer>
None others transaction was found. I did <Create New Maintenance Transaction>, then I gave the poroduct version and next with <continue>
II got a warning message Status was reset by system and There is already a transaction for the systems of this product version, after them the process stoped.
I checked with <SLG1>, but I detected no importing messages.
Regards
Richard

Hi,
check this [maintenance optimizer problem|maintenance optimizer problem]
Might be helpful.
Thanks,
Jansi

AP 1252 dot11radio interface status shows RESET

Hi,
This is regarding an issue with one of my access point. The access point 1252 is autonomous one running the IOS version
C1250 Software (C1250-K9W7-M), Version 12.4(10b)JDA3, RELEASE SOFTWARE (fc1)
The status of the dot11Radio 0 interface is showing as RESET. I have pasted the interface brief details below.
ap03#
ap03#
ap03#sh ip int brief
Interface                  IP-Address      OK? Method Status                Protocol
BVI1                       <ipaddress>       YES DHCP   up                    up
Dot11Radio0                unassigned      YES TFTP   reset                 down
Dot11Radio0.102            unassigned      YES unset reset                 down
Dot11Radio0.104            unassigned      YES unset reset                 down
Dot11Radio0.105            unassigned      YES unset reset                 down
Dot11Radio0.108            unassigned      YES unset reset                 down
Dot11Radio1                unassigned      YES TFTP   administratively down down
GigabitEthernet0           unassigned      YES TFTP   up                    up
GigabitEthernet0.102       unassigned      YES unset up                    up
GigabitEthernet0.104       unassigned      YES unset up                    up
GigabitEthernet0.105       unassigned      YES unset up                    up
GigabitEthernet0.106       unassigned      YES unset up                    up
GigabitEthernet0.108       unassigned      YES unset up                    up
ap03#
Due to this the clientsa re not getting associated.
I tried rebooting the AP; shut the dot11radio0 interface and unshut it; verified the switch end duplex speed settings. Looks good.
Can anyone suggest me how to proceed?
Thankyou.

Hi,
Yes the Access Point was working fine all these days and for the last one week, I am facing this problem. Please find the running configuration of the Access point as below..
Building configuration...
Current configuration : 8275 bytes
version 12.4
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname ap03
logging buffered 65536 notifications
enable secret 5 $1$.WG7$dvJpY1XHuixBk3wA4sfR3/
aaa new-model
aaa group server radius rad_eap
server auth-port 1812 acct-port 1813
aaa authentication login default group tacacs+ local enable
aaa authentication login eap_methods group rad_eap
aaa authorization exec default group tacacs+ local
aaa accounting exec default start-stop group tacacs+
aaa session-id common
clock timezone MST -7
clock summer-time MDT recurring
ip rcmd rsh-enable
ip rcmd remote-host datacom datacom enable
ip rcmd remote-host datacom datacom enable
ip rcmd remote-host datacom datacom enable
ip rcmd remote-host datacom datacom enable
ip rcmd remote-host datacom datacom enable
ip rcmd remote-host datacom datacom enable
ip rcmd remote-host datacom datacom enable
ip rcmd remote-host ncc ncc
ip rcmd remote-host ncc ncc
ip rcmd remote-host ncc ncc
ip rcmd remote-host ncc ncc
ip rcmd remote-host ncc ncc
ip rcmd remote-host ncc ncc
ip rcmd remote-host ncc ncc
ip rcmd remote-host datacom datacom enable
ip rcmd remote-host datacom datacom enable
ip rcmd remote-host datacom datacom enable
ip rcmd remote-host netsvcs netsvcs enable
ip rcmd remote-host netsvcs netsvcs enable
ip rcmd remote-host netsvcs netsvcs enable
ip rcmd remote-host netsvcs netsvcs enable
ip rcmd remote-host netsvcs netsvcs enable
ip rcmd remote-host netsvcs netsvcs enable
ip rcmd remote-host netsvcs netsvcs enable
ip rcmd remote-host netsvcs netsvcs enable
ip rcmd remote-host netsvcs netsvcs enable
ip rcmd remote-host datacom datacom enable
ip domain list u04129.albertsons.com
ip domain list albertsons.com
ip domain name u04129.albertsons.com
ip name-server
ip ssh time-out 90
dot11 activity-timeout unknown default 28800
dot11 ssid Courage-34idkeysNCswuZue3765#%@&
   vlan 102
   authentication open eap eap_methods
   authentication key-management wpa
dot11 ssid Freedom-jKb%&552en@546AsdfG65eD
   vlan 105
   authentication open eap eap_methods
   authentication network-eap eap_methods
   authentication key-management wpa
dot11 ssid Galaxy-73j4CA58fd66y3lKICK#%@&*
   vlan 104
   authentication open
dot11 ssid Quake-35f8d4q9e5@365%lFh&ju#ef2
   vlan 108
   authentication open eap eap_methods
   authentication key-management wpa
dot11 holdoff-time 60
dot11 arp-cache optional
power inline negotiation prestandard source
dot1x timeout reauth-period server
username Cisco password 7 02250D480809
username ggg privilege 15 secret 5 $1$E4Ms$78SOM7s3gZ8QxU.mlnEpj.
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 104 key 1 size 128bit 7 80B78765DD670039FE1557E4BFB4 transmit-key
encryption vlan 104 mode wep mandatory
encryption vlan 108 mode ciphers tkip
encryption vlan 102 mode ciphers tkip
encryption vlan 105 mode ciphers tkip
ssid Courage-34idkeysNCswuZue3765#%@&
ssid Freedom-jKb%&552en@546AsdfG65eD
ssid Galaxy-73j4CA58fd66y3lKICK#%@&*
ssid Quake-35f8d4q9e5@365%lFh&ju#ef2
power local 17
packet retries 64 drop-packet
no preamble-short
channel 2412
station-role root
beacon dtim-period 4
no dot11 extension aironet
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.102
encapsulation dot1Q 102
no ip route-cache
no cdp enable
bridge-group 102
bridge-group 102 subscriber-loop-control
bridge-group 102 input-type-list 201
bridge-group 102 output-type-list 201
bridge-group 102 port-protected
bridge-group 102 block-unknown-source
no bridge-group 102 source-learning
no bridge-group 102 unicast-flooding
bridge-group 102 spanning-disabled
interface Dot11Radio0.104
encapsulation dot1Q 104
no ip route-cache
no cdp enable
bridge-group 104
bridge-group 104 subscriber-loop-control
bridge-group 104 input-type-list 201
bridge-group 104 output-type-list 201
bridge-group 104 port-protected
bridge-group 104 block-unknown-source
no bridge-group 104 source-learning
no bridge-group 104 unicast-flooding
bridge-group 104 spanning-disabled
interface Dot11Radio0.105
encapsulation dot1Q 105
no ip route-cache
no cdp enable
bridge-group 105
bridge-group 105 subscriber-loop-control
bridge-group 105 input-type-list 201
bridge-group 105 output-type-list 201
bridge-group 105 port-protected
bridge-group 105 block-unknown-source
no bridge-group 105 source-learning
no bridge-group 105 unicast-flooding
bridge-group 105 spanning-disabled
interface Dot11Radio0.108
encapsulation dot1Q 108
no ip route-cache
no cdp enable
bridge-group 108
bridge-group 108 subscriber-loop-control
bridge-group 108 input-type-list 201
bridge-group 108 output-type-list 201
bridge-group 108 port-protected
bridge-group 108 block-unknown-source
no bridge-group 108 source-learning
no bridge-group 108 unicast-flooding
bridge-group 108 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
dfs band 3 block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface GigabitEthernet0.102
encapsulation dot1Q 102
no ip route-cache
bridge-group 102
no bridge-group 102 source-learning
bridge-group 102 spanning-disabled
interface GigabitEthernet0.104
encapsulation dot1Q 104
no ip route-cache
bridge-group 104
no bridge-group 104 source-learning
bridge-group 104 spanning-disabled
interface GigabitEthernet0.105
encapsulation dot1Q 105
no ip route-cache
no cdp enable
bridge-group 105
no bridge-group 105 source-learning
bridge-group 105 spanning-disabled
interface GigabitEthernet0.106
encapsulation dot1Q 106 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.108
encapsulation dot1Q 108
no ip route-cache
no cdp enable
bridge-group 108
no bridge-group 108 source-learning
bridge-group 108 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
no logging trap
access-list 1421 permit
access-list 1421 permit
access-list 1421 permit 0.0.0.255
access-list 1421 permit 0.0.0.255
access-list 1421 permit 0.0.255.255
access-list 1421 permit 0.0.255.255
access-list 1421 permit 0.0.255.255
access-list 1421 permit 0.0.255.255
access-list 1421 deny   any
access-list 201 permit 0x0800 0x0000
access-list 201 permit 0x0806 0x0000
access-list 201 deny   0x0000 0xFFFF
snmp-server view NCC mib-2 included
snmp-server community TROUbleIStrouBLE view NCC RO
snmp-server community CHECKtheMAIL RO
snmp-server community HAVocREEk RW
snmp-server community 1aPe3nLnmDt4yVYmbgWoUVjJYz1 view NCC RO 1421
snmp-server community 1aUQ5DAIH2bTBlvJg6RFS5qfsr RO 1421
snmp-server community 1OGgsN21DI4q01QeeIhJGF961 RW 1421
snmp-server enable traps tty
tacacs-server host
tacacs-server host
tacacs-server directed-request
tacacs-server key 7 110A1D5347415C5B53737F7D2E26
radius-server attribute 32 include-in-access-req format %h
radius-server host auth-port 1812 acct-port 1813 key 7 10190C4A533C07185D50721569013D3C3638022F4E0E42400102773D0D481A5E0E
radius-server vsa send accounting
bridge 1 route ip
line con 0
line vty 5 15
sntp server
end

ChaRM Status being reset to Created

In partner determination I have setup Message Processor as a required field. In my ChaRM document, if the MP is not maintained and the document is saved, the status will be set all the way back to Created.
Any ideas?

Hey Solmaniac,
could you please check table TSOCM_COND_MAPP in SM30.
If you find an entry for your specific status "FS in Progress" where you have a condition status transition = "NO_BUSINESS_PARTNER"
=> make sure that
1 - in column MT you have 'Error' and not 'Cancel'
2 - that column 'UsrSt' is empty
3 - save change
Redo your test (relaunch transaction crmd_order first) with only a normal correction AT YOUR SPECIFIC Status. If that works; don t forget to redo the same operations on all entries SDMJ OR ZDMJ - "NO_BUSINESS_PARTNER"
Hope it helps
Regards,
Khalil

3750 Integrated WirelessLAN Controller: Operational Status:resetting

Hi there!
A customer has a WS-C3750G-24WS-S50 WLC-Controller with exactly 50 APs. But those 50 Accesspoints are never completely registered to the WLC. Mostly there are 48-49 accesspoints registered but never 50.
The WLC is losing them randomly. It is never losing the same Ap. When looking via GUI it says "All APs 50" , "Total 49".
First of all I thought that I have the following problem:
The 4402-50 controller supports a maximum of 50 access points and has two ports. To support the maximum number of access points, you would need to create two AP-manager interfaces (see Figure 3-15) because a 4400 series controller can support only 48 access points on one port.
But this is not for the 3750 Integrated WirelessLAN Controller, because you have LAG enabled by default and you cannot change this. Therfore you are not able to create a second AP-Manager interface.
So let´s forget about this.
Then I tried some things on CLI an I noticed the following:
sw-mr-01-01#sh platform wireless-controller 6
Wireless Controller in Switch 6
Operational Status of the Controller : resetting
Service VLAN                         : 4095
Service Port Mac Address             : 0025.8420.8e8f
Service IP Address                   : 127.0.1.6
Management IP Address                : 192.168.150.220
Management VLAN                      : 0
Software Version                     : 5.2.193.0
Keepalive Version(controller/switch) : 1/1
Keepalives Missed                    : 16
Controller accepts http/https        : 0/1
Controller's Status Line             : up
Watchdog resets of Controller        : 1
Controller resets total              : 0
Unacknowledged control messages      : 27
I guess it is not normal that the status is "resetting" although the WLC is running. I can work on GUI and CLI, so it is not really "resetting"
According to the Config Guide status should be "operational".
Is this maybe my problem? The customer is not able to do a good WIPT because the WLC is maybe resetting somehow internaly or something like this.
In traps I got every minute "Lost heartbeat with supervisor" which normaly should be solved in earlier releases. I have 6.0.199.4
HELP!!!
Thanks in advance.

Ok.
1) Assing an IP address for a subnet you are sure you don´t use. for example 192.168.200.5 /24; GW 192.168.200.1 (via WLC GUI).
2) I suppose (because I have not configured any 3750 WLC) that the service port uses the vlan ID 4095 (This is I saw in any capture). then you have to create a int vlan 4095 in the Switch and assing the GW ip address of your WLC service-port.
3) Ping to verify conectivity between devices.
I´m suppose you have the service port via DHCP (it could be the reason you have an IP 0.0.0.0), this is not a best practice; Cisco recommends that assing an IP to this interface and never let to DHCP, specially if you don´t have any dhcp server in this VLAN.
Good Luck and sorry for my english.
Best Regards.

System status LKD REL for operation & phases in Process order

Hi Gurus,
We have a process order in which system status for operations & phases is LKD REL due to which user is not able to confirm the process order. The status of process order is REL PRC APNG APRS BASC BCRQ GMPS MACM RESA SETC. One of the user from planning has set the status to LKD due to some artwork changes. Now another user set the status to unlock. Locked status from order status was reset but at operation & phases level the status is still LKD REL & hence order confirmation is not allowed.
I try to again set the status to lock but i am getting message system status LKD is active (ACT 40547870 0010) which is similar to one which we get during order confirmation.Pls. suggest.
Regards
Amit

Hello Amit
If the status LKD is not set for the order header, this is possibly an inconsistency.
Please open an OSS incident to SAP for further analysis.
BR
Caetano

Appraisal Objects created in 'Approved' Planning status

Good day,
When creating Appraisal Template objects, they are created in 'Approved' Planning Status. We want them created in 'Active' Planning Status. We suspect this is the reason why we can't configure/define the process configuration for our template under IMG path: Personnel Management > Personnel Development > Objective Setting and Appraisals > Define Tabs and Process Configuration for Template. The system gives the following error message: "No process defined for form <template name>"
We've tried using program RHAKTI00 to make these objects (VA VB VC) active but are facing a further issue that it makes appraisal template unreleased. Vice versa when i released the template, it makes objects planning status to reset to approved from active. A similar issue has been posted in the below thread but an answer was not provided.
Objects created in 'Approved' Planning status
Kindly assist.
Best regards
Hardus

>
Chris Thomas wrote:
> Michael - thanks as always for your insight and willingness to help out.
>
> Let me explain further. Duke currently has a third party performance management system that allows the users to manage their Expected Job Results (EJR) in a catalog (translate to Qualifications catalog in R3). In a separate step, the manager can select a single EJR and on the other side of the screen select all , or a subset of their employees to assign the EJR to.
>
> Extrapolate this to SAP PM. We have created a Criteria group in our template and have experimented with adding qualifications via the BADI and this works fine EXCEPT that the manager would have to do this in each employee's appraisal, individually. We are developing the tool to build and maintain the qualification catalog and assign to the employee via Manager Self Service, we are hoping to be able to facilitate the assignment of the EJR/Qualification into the employee's appraisal template. The EJR's (Q objects) will be associated to a quadrant in their catalog: QK's - Clinical Quality, Customer Service, Finance and Work Culture
>
> The criteria group, Expected Job Results, has for criteria groups nested under it: VB objects for four quadrants, Clinical Quality, Customer Service, Finance and Work Culture. SO, we get to the crux of the matter. Since we know the employee, we can get to the appraisal document and associated data in the tables. The decision of which VB to go to is what we are trying to facilitate. The textual names will be the same for the quadrants in the QK's and VB's BUT thats a bad way to try to make a decision, thus the thought to create a relationship between the QK and the associated, logically equivalent VB.
>
> The issue comes up with some of our managers who have large (60+) direct reports so the thought of creating qualifications from the appraisal side, individually per employee does not work. This is why we are thrashing around with trying to start outside and work our way in. Make sense ?
>
> Chris Thomas
Hi Chris,
This is what I was trying to explain between free vs fixed enhancement.
Free enhancement - user selects from a list to add something to the template
Fixed ehahcement - preloads data into the template
If your application that you build in MSS assigns the qualifications to the employees, you have a number of options to make this work as fixed enhancement.
First use the following fixed enhancement as your basis:
HRHAP00_ENHANCE_FIX1 - Fixed Enhancement - Add Position Requirements
Now in your MSS application if you assigned the qualifications to the position and wanted all qualifications to show up in 1 criteria group, you can use this enhancement with no development.
qualifications assigned to positions or jobs are called requirements
qualifications assigned to employees are called qualifications
if you have like 10 qualifications assigned to the position and 4 need to go to clinical quality VB, 3 need to go to finance vb criteria groups, you will create a BADI for each one of those, each criteria group wiill have its own unique badi. in the badi you will apply the filter after all "requirements are selected from position" so that only the 4 belonging to the qualification block for finance are loaded into that VB.
if your mss application MUST assign it the employee for business reason, you use the same logic except swap out position lookup with employee lookup.
are we closer?

Exchange Server 2013 Management Pack in SCOM 2012, can not update healthset status automatically

Hi, all
I have Exchange Server 2013 and SCOM 2012 installed. I have imported Exchange Server 2013 Management Pack to SCOM 2012. Now I have a question that when there is a service not healthy, I can find the red alert in my alert view with the Exchange 2013 server,
but after the service is healthy automatically, the red alert is still there. I can only make it become green healthy status after reseting the healthset status in the healthset explorer.
Does anyone know how to make the server become green healthy status automatically after the monitor is healthy?
Thank you.
Nile

Hi,
How many Exchange Servers do you have? Does this issue only occur on one Exchange Server?
Please check the application log on the problematic Exchange server and see whether there are any related event error.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Every time I open Firefox I get an error msg "Sync encountered an error while syncing:Incorrect account name or password. I need to reset my password and update

Operating System: Windows XP
Firefox Desktop version: 17.0.1
My Privacy settings for Clearing History:
When I quit Firefox, it should automatically clear all:
History - all boxes checked
Data - No boxes check
Here is my sync-log file:
<pre><nowiki>1354415554470 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1354415644475 Sync.Service DEBUG User-Agent: Firefox/17.0.1 FxSync/1.19.0.20121128204232.
1354415644475 Sync.Service INFO Starting sync at 2012-12-01 21:34:04
1354415644476 Sync.SyncScheduler DEBUG Clearing sync triggers and the global score.
1354415644476 Sync.Service INFO In sync().
1354415644476 Sync.Status INFO Resetting Status.
1354415644476 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1354415646726 Sync.Resource DEBUG Channel redirect: https://phx-sync553.services.mozilla.com/1.1/cqvxgzgzfgob76uyg5uyrs6zc36optje/info/collections, https://phx-sync553.services.mozilla.com/1.1/cqvxgzgzfgob76uyg5uyrs6zc36optje/info/collections, 4
1354415646992 Sync.Resource DEBUG mesg: GET fail 401 https://phx-sync553.services.mozilla.com/1.1/cqvxgzgzfgob76uyg5uyrs6zc36optje/info/collections
1354415646992 Sync.Resource DEBUG GET fail 401 https://phx-sync553.services.mozilla.com/1.1/cqvxgzgzfgob76uyg5uyrs6zc36optje/info/collections
1354415646992 Sync.Service INFO Logging out
1354415646992 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1354415646993 Sync.SyncScheduler DEBUG Next sync in 90000 ms.
1354415646993 Sync.ErrorHandler INFO Got 401 response; resetting clusterURL.
1354415646993 Sync.ErrorHandler DEBUG New mid-sync 401 failure. Making a note.
1354415646993 Sync.ErrorHandler INFO Attempting to schedule another sync.
1354415646994 Sync.SyncScheduler DEBUG Next sync in 600000 ms.</nowiki></pre>

I had the same problem and I fixed it as following (See if it's the same case for you) :
1. Goto Tools > Options.
2. Under Advanced, select the Network Tab.
3. Click on Settings in the "Connection" box (open connection settings).
4. Check if "Automatic Proxy Configuration URL" is selected. If it is so, select "No proxy" instead or manually enter your proxy if you are using one.
The option "Automatic Proxy Configuration URL" was the culprit for me and some others as well and selecting "No proxy" instead cured our problems. It is a bug and has already been reported on Bugzilla as you can see here :
https://bugzilla.mozilla.org/show_bug.cgi?id=734828

Appraisal Template Release but in Approve Planning status?

Hello friends,
I am facing problem that when i change all VA VB VC objects status to active using RE_RHAKTI00 then it makes appraisal template un released. Vice versa when i released template, it makes objects planning status to reset to approved from active. This is why i am not been able to find template in prepare or appcreate transactions. We need to keep objects active and template released to be able to make it usable in prepare or create. How to keep template released and VA VB VC elements in active state.
Please guide us.
Regards,
Vinod.
Edited by: vinod naik on Jun 14, 2009 10:21 PM

Closed

Movement Type 122 and Equipment Master status

Using Movement type 102 (Reversal Goods Receipt) the Equipment master status is reset to
AVLB and the stock batch is deleted.
However movement type 122 (Return Delivery to Vendor) does not do this.
Is there anyway to modify movement type 122 so that it works like 102 ?
Regards.
Phil.

If it is a Return to vendor - 122 movement type transaction, the reason for the movement is that the equipment is defective or some issues are there and that is the reason it has been returned. Given 122 movement type is designed to reflect such a business scenario, how you are expecting that this should result in Equipment status to become AVLB.
So the question is why are you posting 122 if it is not real return due some defect ?

Software Update Deployment - Compliance Status = Unknown - Client Check passed/active

Hi,
First I want to say, that I found many Forum-Posts which describes a similar issue, but it is not exactly my issue...
I have a ADR (Auto Deployment Rule) which creates every Month a Windows Update Package, and deploys it. The Deployment starts from a custom day, and ends 14 days later (Deadline). Now I have the issue, that the compliance chek in the deployment status is
"reseted" every day (at 0:00) - (at least after the Deadline!)... The Compliance Check starts every day at 0:00 and then tries to reach every Computer again! So if the Computer-object is powered on and responding, it turns over to compliant (because
it is already compliant - the Windows Update Installation works fine...). But if the Computer is not powered on / not responding the next day, it turns over to "Unknown - Client check passed/active" instead of staying in the Status "compliant"
until it is powered on / respinding again, then it changes over to compliant again... Why is that?
Is there a issue with the Client Settings?:
- Software Update Scan (every day)
- Software Update Re-Evaluation (every day)
- Compliance Settings (every day at 0:00) -> but is this not for the Configuration Baselines?
any other ideas?
Patrik

As soon as the computer get the Software Update configuration items, it will start compliance checking, then send the compliance check result to MP.
From your description, the powered on computers sent the state message to the MP when they got the deployment policy. And the frequency of Status Summarizers of updates deployment for a deployment that was modified in the last
30 days is 60 minutes. Because the site server had not recieved the state message from the powered off computers so that the compliance state was changed to Unknown.
Juke Chou
TechNet Community Support

System status NMAT is active (NTW 4000297)

Hi,
I am trying to confirm a "Primary Cost activity" but while doing so i get a message "System status NMAT is active (NTW 4000297)".
I want to understand how is this system status (NMAT) getting activated? and what is the purpose of this status?
Warm Regards,
Jatinder Bansal

Hi,
Generally system sets the NMAT status at Order header level when you create an Order without any material assignment.
Try adding a material component and see if the status gets reset.
Else you can check the settings in tcode OPJK. Tick the "No Check" check box and run your process again. You should not get this status now.
Regards,
Gokul

FAQ: What features use the GPU and how do I troubleshoot GPU issues?

Photoshop CS6 GPU FAQ
Introduction
This document provides a quick reference guide to video card usage in Photoshop. Some features require a compatible video card to work; if the video card or its driver is defective or unsupported, those features will not work at all. Other features use the video card for acceleration and if the card or driver is defective those features will run more slowly.
Mercury Graphics Engine
The Mercury Graphics Engine (MGE) represents features that use video card, or GPU, acceleration. In Photoshop CS6, this new engine delivers near-instant results when editing with key tools such as Liquify, Warp, Lighting Effects and the Oil Paint filter. The new MGE delivers unprecedented responsiveness for a fluid feel as you work.
MGE is new to Photoshop CS6, and uses both the OpenGL and OpenCL frameworks. It does not use the proprietary CUDA framework from nVidia.
In order to use MGE, you must have a supported video card and updated driver. If you do not have a supported card, performance will be degraded. In most cases the acceleration is lost and the feature runs in the normal CPU mode. However, there are some features that will not work without a supported video card.
GPU features added in Photoshop CS6
Adaptive Wide Angle Filter (compatible video card required)
Liquify (accelerated by compatible video card with 512MB VRAM, GPU mode unavailable on Windows XP)
Oil Paint (compatible video card required)
Warp and Puppet Warp (accelerated by compatible video card, GPU mode unavailable on Windows XP)
Field Blur, Iris Blur, and Tilt/Shift (accelerated by compatible video
card supporting OpenCL, GPU mode unavailable on Windows XP)
Lighting Effects Gallery (compatible video card required with 512MB
VRAM, unavailable on Windows XP)
New 3D enhancements (3D features in Photoshop require a compatible video card with 512MB VRAM, unavailable on Windows XP):
Draggable Shadows
Ground plane reflections
Roughness
On-canvas UI controls
Ground plane
Liqht widgets on edge of canvas
IBL (image based light) controller
* Note that all 3D features are unavailable on Windows XP in Photoshop CS6
GPU features added in previous versions of Photoshop
Scrubby Zoom. See Zoom continuously
Heads Up Display (HUD) color picker. See Choose a color while painting
Color sampling ring. Choose colors with the Eyedropper tool
Brush dynamic resize and hardness control. See Resize or change hardness of cursors by dragging
Bristle Brush tip previews. Bristle tip shape options
Rule of thirds crop grid overlay. Crop images
Zoom enhancements. Smooth display at all zoom levels and temporary zoom. See Zoom continuouslyTemporarily zoom an image
Animated transitions for one-stop zoom.
Flick-panning.
Rotate the canvas. Use the Rotate View tool
View nonsquare pixel images. Adjust pixel aspect ratio
Pixel grid. Hide the pixel grid
Adobe Color Engine (ACE).
Draw Brush tip cursors. Resize or change hardness of cursors by dragging
Adobe Bridge GPU features
Preview panel
Full-screen preview
Review mode
See Preview and compare images in Adobe Bridge CS6 Help for information on all of these features.
GPU/OpenGL preferences in Photoshop CS6
The advantages of using a compatible video card (GPU) with Photoshop are that you can experience better performance and more features. Problems can occur if you have an older video card with limited VRAM or if you use other programs at the same time as Photoshop that use the GPU.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS).
In the Performance panel, make sure Use Graphics Processor is selected in GPU Settings.
Click Advanced Settings and specify the following options:
Mode > Basic
Mode > Normal
Mode > Advanced Provides the benefits of Normal mode as well as newer OpenGL advances that can result in improved performance.
Use Graphics Processor to Accelerate Computation
Use OpenCL Uses the GPU to accelerate the new blur filters (Field Blur, Iris Blur, and Tilt-Shift) – OpenCL will only be available on newer GPUs that support OpenCL v1.1 or higher
Anti-Alias Guides And Paths Allows the GPU hardware to smooth the edges of drawn guides and paths.
30 Bit Display (Windows only) Allows Photoshop to display 30 bit data directly to screen on video cards that support it
Quick GPU Troubleshooting Steps
You can experience problems such as artifacts, errors, and crashes if there are incompatibilities between Photoshop and the display components that access the GPU.
If you experience crashes, incorrectly rendered windows or objects, redraw issues, or performance issues while running Photoshop, first determine whether OpenGL is causing the problem.
Turn off OpenGL.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS).
In the Performance panel, uncheck Use Graphics Processor. Click OK.
Restart Photoshop, and perform the same function.
If the problem recurs while OpenGL Drawing is disabled, OpenGL is not the cause. For additional troubleshooting, see Troubleshoot system errors and freezes | Adobe software on Windows (cpsid_82252) or Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x (cpsid_82414).
If the problem resolves, proceed with the rest of the troubleshooting steps to fix OpenGL.
Make sure that you're using the latest update of Photoshop.Updates fix bugs and issues.
Update the display driver.Updated display drivers can fix many issues, such as crashing, incorrectly rendered objects, and performance problems. Determine what video card you have and go directly to the manufacturer's website (nVidia or ATI/AMD) and download the latest driver. (Note: Simply doing a Windows Update is does not guarantee you are using the latest driver. You must go directly to the nVideo or ATI/AMD websites to get the absolute latest driver.) After you update your driver, turn on Use Graphics Processor in Photoshop preferences.
Reset preferences.
Resetting preferences returns OpenGL settings to their default status. Reset Photoshop preferences by pressing and holding Shift+Ctrl+Alt (Windows) or Shift+Option+Command (Mac OS) immediately after you start Photoshop.
Click Yes when asked if you want to delete the Adobe Photoshop Settings File.
Retry the function that caused the problem.
Change the OpenGL mode to Basic.
Setting the OpenGL mode to Basic uses the least amount of GPU memory and the most basic GPU feature set.
Close all documents.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS)
In the Performance panel, click the GPU Settings Advanced Settings button.
Choose Mode > Basic
Restart Photoshop.
If this solution resolves the problem, switch to Normal mode. See if the issue recurs. If the issue recurs, return to Basic mode.
Note: If you’re changing GPU preferences to troubleshoot a problem, re-launch Photoshop after each change.
If you are using more than one video adapter, remove the additional cards.
Multiple video adapters can cause problems with GPU accelerated or enabled features in Photoshop. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Otherwise, crashes and other problems can occur in Photoshop.
Note: Using two video adapters does not enhance Photoshop's performance.
Check your Cache Levels setting.
If you've set your Cache Levels to 1 in Photoshop preferences, you can experience performance issues with GPU features. Reset Cache Levels to the default setting, which is 4.
Choose Edit > Preferences > Performance (Windows) or Photoshop > Preferences (Mac OS)
In the Performance panel, choose Cache Levels > 4.
The GPU Sniffer
To help guard against Photoshop crashes related to bad GPU hardware or drivers, Photoshop employs a small program called the GPU Sniffer. Every time Photoshop is launched, Photoshop launches the sniffer. The sniffer runs rudimentary tests of the GPU and reports the results to Photoshop. If the sniffer crashes or reports a failure status to Photoshop, Photoshop will not use the GPU. The Use Graphics Hardware checkbox in the Performance panel of the Preferences will be unchecked and disabled.
The first time the sniffer fails, Photoshop will display a dialog indicating that it has detected a problem with the GPU. On subsequent launches the dialog will not appear unless the Photoshop preferences are reset.
If the user corrects the problem, either by replacing the video card or by updating the driver, then the sniffer will pass on the next launch and the Use Graphics Hardware checkbox will be enabled and returned to its previous state (enabled or disabled).
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. While the minimum amount of VRAM supported on video cards for Photoshop CS6 is 256MB, some features require 512MB of VRAM to be enabled.
Note: Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000
AMD/ATI Radeon 2000, 3000, 4000, 5000, 6000, 7000 series
AMD/ATI FirePro 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900
Intel Intel HD Graphics, Intel HD Graphics P3000, Intel HD Graphics P4000
Note: ATI X1000 series and nVidia 7000 series cards are no longer being tested and are not officially supported in CS6 – some basic GL functionality may be available for both these cards.
Note: 3Dand some Open GL features are disabled on Windows XP, as stated on : http://labs.adobe.com/technologies/photoshopcs6/

I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.

Status is reset on UCMON

Similar Messages

Maybe you are looking for