Status "log version" in message monitor
Hi,
In a proxy to JDBC scenario, i'm getting status "log version" in sxmb_moni.
I'm trying to insert some records in target JDBC file and recovery JDBC response in a synchronous message interface.
However, i never have ssen JDBC response .
Why?
What does "log version status" means?
Thanks ,
Carme Alentorn
Hi Carme,
The meaning of Log version is " When ever wrong entry field pass to the target end the problem will be raised.
(Spicial chacters or more fields extra)
I think it exatly data will be wrong.check ur data end.
and check the adapter status.
Regards,
Sateesh
Similar Messages
-
Messages in TBD status in RWB IE message monitoring
Hi
I have messages in TBD status in RWB message monoitoring and log version of messages displayed in SXMB_MONI.
I understand that restarting XI_AF_MESSAGING from NWA will flush out the queue , However would like to understand
1. Once flushed out, will the message be out into next level of processing or will it be in cancelled .
2. Is there any alternative apart from restarting the services. The issue mainly occured due to some slowness in PI and I would want these messages to be cancelled and should not be transferred to the receiver application .
Your advise is much appreciated
Thanks
Anushahi anusha,
please check whether Queue name is registered or not in SMQR. and moreover these will block further messages.
just check this note :
SAP Note 1623356
Regards,
Loordh. -
SXMB_MONI: Message status: Log Version ?
Hi,
We have a couple synchronous messages that have the "Log Version" status in the integration engine (ABAP stack tcode: sxmb_moni). It is a white circle icon. If we click on the legend (in sxmb_moni), we do not see this status (we see all the others green flag, race flag, etc)
If we click in theses messages, only the following 4 pipeline steps are done (Inbound message + Receiver message + Interface Determination + Message Branching) we do not see all the others (Request message mapping, call adapter).
What is the meaning of this status ?
Thanks !from help.sap.com
<i>This message version was generated by logging and does not have a particular status.</i>
since yours is a sync scenario most probbaly what happend is that the response system was locked at the time request was send hence no response was received.
we had the same problem and we re-send the message from sender system and it wen't through properly
Thanx
Aamir
Note:i m still unable to figure out if its possible to re-send this from sxmb_moni,may be its not possible,also m not sure why we didn't get timeout error but got this one,may be some expert can shed some light on it. -
Hi Guys,
i am getting synchronous messages status as " TO BE DELIVERD" in Runtime workbench-Integration engine monitoring, i tried to resend this to be deliverd message from Runtime work bench i'm getting error mesaage " Unable to schedule 1 of 1 messages for processing; update the status"
how i will update the status as per above message ?
when i checked with same message id in MONI, its showing as status "LOG VERSION ".
Can any one help me on this how to resolve this issue..
Thanks,
SivaHi,
Messages might got blocked in SMQ2.
If you found messages in Queue double click on the queue --> if there is any issue in the messages ---> double click on the messages which redirects you to moni try to rectify the error and reprocess again
Regards,
naveen -
Hello,
Can you please anybody tell me what is log version in SXI_Monitor. I have a HTTP to RFC synchronous scenario. For of my message i can message status as log version and i dodnt see any response in Moni. This is happending for few messages.
Please help me abt this.
Thanks,
Vishal> Can you please anybody tell me what is log version in SXI_Monitor. I have a HTTP to RFC synchronous scenario. For of my message i can message status as log version and i dodnt see any response in Moni. This is happending for few messages.
>
Hi,
The synchronous scenarios are not stored in XI database (they are not persisted). In order to see them in SXMB_MINI, you have to change the log level to 2. This can be done in SXMB_ADM - Integration Engine Configuration -RUNTIME - LOGGING SYNC to 1.
The status log version shows that the message got processed in IE.
VJ -
In Message Monitoring Message showing holding status
Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
<b>Holding</b>
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj RoyHi Debraj
HOLDING is a status which occurs normally for EOIO (Exactly Once In Order), so your message is set to Holding means some earlier message has not gone through. So until those messages are through this message will be in HOLDING state.
Have a look at this link which explains how to handle such scenarios.
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
cheers
Sameer
Assign points if it helped you -
How to Dal with Log Version in SXMB_MONI
DEAR EXPERTS,
sCENARIO:
FILE-----> PI -
> SAP ECC
Sender - File adapter
Recv - Proxy
Mode_ Sync.
Some of the messages are going to STATUS - *Log Version IN SXMB_MONI. This is happening Intermitently.
How to avoid log version in sxmb_moni..Any SAP Note available.....
Take care,
PoojaThis probelm occurs randomly... There are no data related isues.
there may not be a solution to this problem...may be just a precaution......just check with the end system developers and verify what was the status of the application when they processed the Req from XI (for which you got Log Version).....
Other way to deal with this problem is resend the message.....AFAIK there seems to be no other way out.....if you find any then please let me know
Regards,
Abhishek. -
Log version in SXMB_MONI
what is the meaning of this particular message ?? If this error occurs where and what should we check ?? How to sort out the problem ??
Log version
This message version was generated by logging and does not have a particular status.
thanks
kumarHi Palnati
refer the below links
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5
http://help.sap.com/saphelp_nw04/helpdata/en/44/f5c3de84056c30e10000000a114a6b/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e01e9400-9e81-2910-20a5-a862945a5e98
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6a90d6aa-0b01-0010-8a83-cf0e6c70dcce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Hope this will solve ur issue related to SXMB_MONI
<b>Pls reward if useful</b> -
In Message Monitoring Message showing Error:Message
Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
<b>Holding</b>
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj Royhi debraj..
is ur mesage ie sxmb_moni in red staus or scheduled status...??
if in scheduled cud be errors with queues ...delete ur queues with tcodes : smq1 and smq2...
and also hopefully u must have configured ur idoc correctly..
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
regards..
vishal -
Log version status for message in PI message monitoring
Hi All,
we send IDocs from ECC to PI and then external systems. It's working fine all the time But third party system did not recieve only one message out of many. This missing message showing in PI is like LOG version when I look at in monitoring.It was happend long back and its still showing as scheduled.
And also there were no pending messages in the queue.
any idea what happend for this message exactly ?
Thanks .Hello
Check the notes below:
#1471001 PI monitor: Synchronous response is displayed as log version
#1256891 Logging errors in synchronous communication
These may help explain/fix the error.
Regards
Mark -
MONI Message Status as Log Version
Hi Guys,
In MONI few of messages getting status as Log Version..Could any one plesae let me know why ? and what is best way of solution for this...
Thanks,
Siva...It is the processing instance of the mesg. If you restart the mesg for failure reason, it will version until execute successfully with version numbers.
Refer this link if you have problem in the proxy side
Log version in sxmb_moni in recever system (soap to proxy scenario) -
Stuck in To Be Delivered Status in Message Monitoring - Adapter Engine
Hi,
I have messages stuck in To Be Delivered status in Messages Monitoring. When i checked the Audito Logs, there are NO LOGS. I resent the message and now the logs indicated in the Audit Logs is:
2014-03-26 08:39:10
Information
The message was successfully received by the messaging system. Protocol: XI URL: http://<host>:<port>/MessagingSystem/receive/AFW/XI Credential (User): PIIXXXX
2014-03-26 08:39:10
Information
Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2014-03-26 08:39:10
Information
Message successfully put into the queue.
2014-03-26 08:52:48
Information
Admin action: Trying to redeliver message.
The connection between the receiver is ok, does this have something to do with the Communication Channels?
Please help.
thank you.Hi Eng Swee,
there are messages that were cancelled yesterday and the status is 'Terminated With Errors'
this is what is indicated in the Audit Logs
2014-03-26 02:38:47
Information
Admin action: Trying to fail message.
2014-03-26 02:38:47
Error
The message status was set to FAIL.
2014-03-26 02:38:47
Information
Admin action: The message was successfully set to status failed.
2014-03-26 02:38:47
Error
Asynchronous error detected: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Message failed by admin.. Trying to report it.
2014-03-26 02:38:47
Error
Asynchronous error reported.
Is this the reason why the messages are stuck?
thank you! -
SOAP error in audit log of message monitor
Hi,
I am using RPC wsdl file for idoc-xi-soap services. When I am doing the testing for the scenario in the message monitor I am getting the following audit log:
2008-02-29 15:21:48 Success Message successfully received by messaging system. Profile: XI URL: http://EMHBSSAP05.bekaertcorp.local:56600/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2008-02-29 15:21:48 Success Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2008-02-29 15:21:48 Success The message status set to DLNG.
2008-02-29 15:21:48 Success Delivering to channel: ZCC_Material_SOAP
2008-02-29 15:21:48 Success MP: Entering module processor
2008-02-29 15:21:48 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
2008-02-29 15:21:48 Success Message successfully put into the queue.
2008-02-29 15:21:48 Success The message was successfully retrieved from the receive queue.
2008-02-29 15:21:48 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-02-29 15:21:48 Success SOAP: completed the processing
2008-02-29 15:21:48 Success SOAP: continuing to response message a9ea9a30-e6d1-11dc-c8bd-001a4b0658c1
2008-02-29 15:21:48 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success SOAP: sending a delivery error ack ...
2008-02-29 15:21:48 Success SOAP: sent a delivery error ack
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: SystemErrorAck
2008-02-29 15:21:48 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: AckNotSupported
2008-02-29 15:21:48 Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:.
2008-02-29 15:21:48 Success The message status set to WAIT.
Can anybody suggest what is the meaning and root cause for the error:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
Thanks & Regards
Prabhatgo to sxi_monitor and get the inbound message, later go to IR an do a TEST mapping.
any error occur?if yes, paste it here
generally soap fault o soap exception relate to an error from WS side,but before say nothing check you have all data and transformation OK.
hope it helps -
Message Monitoring with status delivering
Hello,
I have an scenario R/3 (Proxy) -> XI -> File.
Alls is successful in sxmb_moni, and there is nothing in SMQ1 and SMQ2, but in message monitoring ( adapter engine ) the message appears in status delivering.
The quality of service is exactly once. I checked the adapter and is in green status and the in the log the last message is Success The message status set to DLNG.
I've been searching for old messages, but for the same interface all the messages are with status delivering.
I can't cancel or resend the messages. Then I do the update but after that when I try to resend I obtain the same message "Update the status".
The adapter is an FTP connection with Connect Mode "Permanently".
Do you know what could be the problem and how to solve it? All the messages we send are in delivering status.
Many thanks in advance.
Regards,
Xavier.Hi Xavier Carbonell ,
i also faced same problem. In my case some other Communication channels were in error state so all messages are struct in Messaging System, all my messages status went "To be Delivering". Please check all ur Communication channels are in green.
For futher information check the below link.
Flat file with two separators
If it is still not solved then restart J2EE engine.
Thanks,
Venkatesh
Edited by: venkatesh bs on Apr 14, 2008 12:09 PM -
Message Version option in Message Monitoring(integration engine)??
Hi All
While Message Monitoring in Integration engine, when i was checking the message contents in audit log i found a small drop down at the top saying "message version" which has version 0, version 1......
Not all messages were having the same versions, some were having 2 some 8.
What is this Message version option???
Any information on this will be appreciated.
Regards
Jabbshi,
>>>What is this Message version option???
have a look here
http://help.sap.com/saphelp_NW04/helpdata/en/c9/775b3b82646c3ae10000000a114084/frameset.htm
basically it lets you compare xml message after each pipeline step
Regards,
Michal Krawczyk
Maybe you are looking for
-
Cannot Open Camera Raw Images in PS CR3
Even though I've been a professional photographer for over 25 years, I finally decided it was time to go digital. Little did I know how overwhelming and frustrating the learning process would be, especially for an old timer like me. Well, the 10 day
-
How I find my iPod touch 4g without Internet acces.because my iPod lost on a trip so how I find that?
-
IPad 2 hdmi mirroring doesn't work for videos
Ok, am I the only one who can't get the display mirroring to work on iPad 2? I plugged the hdmi adapter in to the iPad and got the Home screen to mirror, but when I played a video using the 'Videos' app the video displayed on my tv, but not on the iP
-
See this article in the Sydney Morning Herald. I've seen nothing in the UK press about this weakness. Why weren't we told of this by Apple? I fear the overwhelming rush for profits is blurring the Apply/Customer relationship. Maybe its time to move o
-
Hi, I am having trouble fixing my CSS so that my primaryContent does not scroll in IE7. This page works fine in Firefox and IE6. http://67.199.64.241/test.asp I use 2 stylesheets which are attached. main2col.css is where I think I need some sort of h