Step by step process to implement SSL

I am new to SSL implementation. I would like to know the step by step process to implement SSL for a webpage. I have gathered few information about SSL and I am not clear as what exactly to be done.
My requirement:
I have learned how to create a certificate using keytool and I am not clear what has to be done after that. Let me put what I understood so far.
1. I should create a certificate using keytool at server side.
2. When the client requires the page I am not clear what should be done such as certificate verification etc., and how. Can anyone please tell me the exact procedure to implement the SSL.
Thanks in advance.....

You need to read the JSSE Reference Guide.

Similar Messages

Step by step process to implement the SAP ITS Mobile application

Hello Experts ,
I need Information on the SAP ITS mobile (Internet tranasaction server ).
We are currently using the RF transaction through character based hand held devices through SAP Console , Now we would like to use the GUI Touch Screen based devices .
For this we need to convert from the existing SAP Console transactions to use the functionality of ITS mobile.
I am new for this , Can you please provide the detailed configuration with step by step process to implement the SAP ITS Mobile application to fulfilll above requirment .
Best Regards,
Rp

Hello,
Please refer to this documents:
[Implementation WM for Mobile Devices Using ITS|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/0026c5f5-0eca-2c10-25a3-c0ed87478812&overridelayout=true]
[ITSmobile wiki|http://wiki.sdn.sap.com/wiki/display/HOME/ITSmobile]

Step by step guide to implement SSL

Hi
Is there any PPT or PDF or BLOGS or any document that showing step by step procedure to implement SSL ?? Any links in this regard is highly appreciated
thanks
kumar

Kumar,
Check this document on how to configure this in J2EE engine:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/23894238-0701-0010-40b0-a0a6d5c4ad9f?prtmode=navigate
Regards,
---Satish

STEP BY STEP PROCESS TO IMPLEMENT BW IN A SAP - R3 ENVIRONMENT

Hai experts!!!,
An organisation is running on SAP for the past 3 years, it is planning to implement SAP-BW. what are all the steps for implementing this process.
Thanks in advance.
Regards,
Giri

Hi Giri
Your question seems very simple but to answer it here on the SDN requires tremendous energy and also just may not be possible.
Have a look at the sap help to have glimpse of SAP BW.
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/content.htm
Wish you all the best for yor SAP BIW implementation.
regards

Workflow-step processing the form doesnt work anymore

Hi,
i have an issue with all my forms on the SAP Portal.
As of late i can fill in a form, send it to be approved, they can be approved then send to the processor.
Now here is where it stops working. This step, process form, results in a ever spinning "wait" button.
Steps i took :
Downloaded latest version of the ZCI(js_container) and implemented that on the ADS. ( Was in a SAP Note 1077953)
Had an version of the form from a few months back, used that one, workflow worked again. Aftermaking one change on the form and activating it, problem was back. (Hardly a good option since they are a few months old but at least that proved it worked before)
Delete the form and recreate it, wich results in a working workflow again, however, when i do this the form "flickers". The flickering part goes away when i use the SFP_ZCI_UPDATE transaction, but then the workflow error comes back.
I know it got something to do with the version of js_container i use but i cant seem to solve this.
I hope i made sence
Thx in advance for any help!
Adobe version :
SAP BASIS: 701 level 0007
SAP_HR : 604 level 0032
SAP ECC 6.0
Adobe version : 8.01.3357.1.510605.510114
Edited by: R. v. d. Voorden on Jun 15, 2011 1:19 PM

You probably need to have your buttons' code at frame 180 instead of any earlier frame. If the 15 buttons end at frame 180, but the code for them is at frame 1, then when you move beyond frame 180 you essentially lose the buttons, and if you move back to frame 180, there is no code there to assign functionality to the buttons.

Facing issues in single step processing

We are using single step processing, But facing issues while running GenData only.
We get the desired output if we run GenData and GenPrint.
And our Input file is XML
Below is our AFGJOB.JDT and FSIUSER.INI(what we are using)
AFGJOB
/* This base (this implementation) uses these rules. */
<Base Rules>
;RULStandardJobProc;1;Always the first job level rule;
;JobInit1;1;;
;BuildMasterFormList;1;4;
/*;InitSetRecipCache;5;used to set the cache the system will use to store recipient information in memory;*/
;InitPrint;;;required to execute gendata/genprint into single step
;CreateGlbVar;1;TblLstH,PVOID;
;LoadTblFiles;1;;
/* Every form set in this base uses these rules. */
<Base Form Set Rules>
;NoGenTrnTransactionProc;2;required to combin gentrn/gendata into single step;
;UseXMLExtract;2;;
/*;SetOutputFromExtrFile;2;!/global/lm/com,COM,128,PDFNAME;*/
;ResetOvFlw;2;;
/*;IfRecipUsed;2;BATCH1=Client;*/
/*;IfRecipUsed;2;BATCH2=Office;*/
;BuildFormList;2;;
;LoadRcpTbl;2;;
;RunSetRcpTbl;2;;
/*;WriteRCBFiles;;;*/
;PrintFormset;;;
;WriteOutput;;;
;WriteNAFile;;;
/*;BatchByPageCount;;;*/
/*;CreateRecordList;;;*/
/*;WriteRCBWithPageCount;;;*/
/*;BatchingByPageCountINI;;;*/
;PageBatchStage1InitTerm;;;
;PaginateAndPropagate;;
;ProcessQueue;;PostPaginationQueue;
;BatchingByRecipINI;;;
/* Every image in this base uses these rules. */
<Base Image Rules>
;RULStandardImageProc;3;Always the first image level rule;
;InsNAHdr;3;;
/* Every field in this base uses these rules. */
<Base Field Rules>
;StandardFieldProc;;Always the first field level rule;
FSIUSER.INI
< BATCH1 >
Printer = Printer1
< BATCH2 >
Printer = Printer2
<BatchingByRecip>
DefaultBatch = BATCH1
Batch_Recip_Def = true;"BATCH1";Client
Batch_Recip_Def = true;"BATCH2";Office
< GenData >
ClearMsgFile = Yes
< CONFIG:Computer >
ARCPath = Arc\
BaseDef = Computer
BDFFile = COMPUTER_DEV
BDFLib = BDFLib\
CARPATH = Arc\
DalFile = COMPUTER_DEV
DDTFile = COMPUTER_DEV
Deflib = DEFLIB\
DictionaryFile = XDB.DBF
EDLLIB = EDLLIB\
FieldBaseFile = FDB.DBF
FontLib = DEFLIB\
FORFile = COMPUTER_DEV
FORLib = FORLib\
FormDef = FORM.DAT
FormFile = COMPUTER_DEV
FormLib = FORMS\
FormsetTrigger = SETRCPTB.DAT
GRPFile = COMPUTER_DEV
GRPLib = GRPLib\
HELPLIB = HELP\
LBYLIB = DEFLIB\
LogoFile = COMPUTER_DEV
TABLELIB = TABLE\
WIPPATH = Wip\
XDDFile = COMPUTER_DEV
XRFFILE = rel113sm
< DALLibraries >
CompileWhenLoaded = N
< DBHandler:D2EA8199 >
Class = ODBC
CreateIndex = No
CreateTable = No
Debug = No
PassWd = ~ENCRYPTED 1hRFNZEw5ahYdlqi0LMu83Wa0
Server = DocumakerDSN
SubClass = MYSQL
UserID = documaker
< DBTable:COMPUTER_DEV >
DBHandler = D2EA8199
< DBTable:COMPUTER_DEV_USER >
DBHandler = D2EA8199
DefaultTag = UNIQUEIDTAG
UniqueIDTag = UNIQUEIDTAG
UniqueTag = IDTAG
< DBTable:COMPUTER_DEVC >
DBHandler = D2EA8199
UniqueTag = CATALOGID
< DBTable:COMPUTER_DEVD >
DBHandler = D2EA8199
DFD = DEFLIB\carfileblob.DFD
UniqueTag = ARCKEY+SEQ_NUM
< DBTable:COMPUTER_DEVL >
DBHandler = D2EA8199
UniqueTag = DATE+TIME
< Environment >
DO_LOGON = Yes
FSISYSINI = fsisys.ini
< Key1Table >
COM = COM
< Key2Table >
BU = LOB
< Library:COMPUTER_DEV >
CATALOG = COMPUTER_DEVC
DBTable = COMPUTER_DEVD
LBYLogFile = COMPUTER_DEVL
USERFile = COMPUTER_DEV_USER
< LibraryManager >
Class = GA;Georgia resource
Class = TX;Texas resource
Class = MD;Maryland resource
DefaultPromoteSelectedOn = No
LBYLogFile = DEFLIB\lbylog.bdf
Library = COMPUTER_DEV
Mode = DEV;Development
Mode = TEST;Test
Mode = PROD;Production
Project = P001;Project 001
Project = P002;Project 002
Project = P003;Project 003
PromoteReqClass = No
PromoteReqDesc = No
PromoteReqMode = No
PromoteReqProject = No
PromoteReqStat = No
Status = TEST;Needs to be tested
Status = FAILED;Failed testing
Status = PASSED;Passed testing
Status = PROMOTED;Has been promoted
< MasterResource >
BaseDef = <Config:Computer> BaseDef =
BDFFile = <Config:Computer> BDFFile =
BDFLib = <Config:Computer> BDFLib =
CompLib = <Config:Computer> CompLib =
DalFile = <Config:Computer> DalFile =
DDTFile = <Config:Computer> DDTFile =
DDTLib = <Config:Computer> DDTLib =
Deflib = <Config:Computer> Deflib =
DictionaryFile = <Config:Computer> DictionaryFile =
EDLLIB = <Config:Computer> EDLLIB =
FieldBaseFile = <Config:Computer> FieldBaseFile =
FNTFILE = <Config:Computer> FNTFILE =
FontLib = <Config:Computer> FontLib =
FORFile = <Config:Computer> FORFile =
FORLib = <Config:Computer> FORLib =
Form7x = <Config:Computer> Form7x =
FormDef = <Config:Computer> FormDef =
FormFile = <Config:Computer> FormFile =
FormLib = <Config:Computer> FormLib =
FormsetTrigger = <Config:Computer> FormsetTrigger =
GRPFile = <Config:Computer> GRPFile =
GRPLib = <Config:Computer> GRPLib =
HELPLIB = <Config:Computer> HELPLIB =
LBYLIB = <Config:Computer> LBYLIB =
LbyScriptLib = <Config:Computer> LbyScriptLib =
LogoFile = <Config:Computer> LogoFile =
LogoLib = <Config:Computer> LogoLib =
TABLELIB = <Config:Computer> TABLELIB =
TablePath = <MASTERRESOURCE> TABLELIB =
XDDFile = <Config:Computer> XDDFile =
XRFFILE = <Config:Computer> XRFFILE =
< ODBC_FileConvert >
COMPUTER_DEV = COMPUTER_DEV
COMPUTER_DEV_USER = COMPUTER_DEV_USER
COMPUTER_DEVC = COMPUTER_DEV_LBYC
COMPUTER_DEVD = COMPUTER_DEV_LBYD
COMPUTER_DEVL = COMPUTER_DEV_LBYL
< PRINT_BATCHES >
BATCH1 = C:\FAP\DLL\Computer\DATA\Client.bch
BATCH2 = C:\FAP\DLL\Computer\DATA\Office.bch
< Printer >
EnableBatchBanner = No
EnableTransBanner = No
< Printers >
PrtType = PDF
< Printer1 >
Port = C:\FAP\DLL\Computer\DATA\Client.pdf
PrtType = PDF
< Printer2 >
Port = C:\FAP\DLL\Computer\DATA\Office.pdf
PrtType = PDF
< PrinterInfo >
Printer = Printer1
Printer = Printer2
< PrintFormset >
LogFile = C:\FAP\DLL\Computer\DATA\mf.log
LogFileType = XML
MultiFilePrint = Yes
< Print >
RCBDfdField =
CallbackFunc = MultiFilePrint
MultiFileLog = C:\FAP\DLL\Computer\DATA\MFP.LOG
< Recip_Names >
Client = 001,Client COPY
Office = 002,Office COPY\
< PrtType:EPT >
Class = Unknown
KeepFile = Yes
Message = This is a testing message sent automatically from Oracle Documaker.Attached the generated document.
MessageFile = C:\FAP\DLL\Computer\INPUT\ArumugamFormat.mhtml
PrtType = PDF
RecipFunc = CUSSetMailRecipGVM
Recipient = [email protected];
RecipMod = CSTW32
Subject = Oracle Documaker Auto Email Test by Cognizant
< RECIP_MAIL >
client = [email protected];
office = [email protected];
< Userinfo >
File = COMPUTER_DEV_USER
< PrtType:PDF >
BookMark = No
Class = PDF
DownloadFonts = Y
Module = PDFW32
PageNumbers = Yes
PrintFunc = PDFPrint
PrintViewOnly = Yes
SendColor = Y
SendOverlays = N
Regards,
Raja S

Hi,
We did this above steps.
Below is our PDFNAME.dal
file_name = getdata("!/global/detail/name 1,99");
file_name= file_name & ".pdf"
return (file_name);
Below is our FSIUSER.INI
< BATCH1 >
Printer = Printer1
< BATCH2 >
Printer = Printer2
< BatchingByRecip >
Batch_Recip_Def = true;"BATCH1";Client
Batch_Recip_Def = true;"BATCH2";Office
DefaultBatch = BATCH1
< CONFIG:Computer >
ARCPath = Arc\
BaseDef = Computer
BDFFile = COMPUTER_DEV
BDFLib = BDFLib\
CARPATH = Arc\
DalFile = COMPUTER_DEV
DDTFile = COMPUTER_DEV
Deflib = DEFLIB\
DictionaryFile = XDB.DBF
EDLLIB = EDLLIB\
FieldBaseFile = FDB.DBF
FontLib = DEFLIB\
FORFile = COMPUTER_DEV
FORLib = FORLib\
FormDef = FORM.DAT
FormFile = COMPUTER_DEV
FormLib = FORMS\
FormsetTrigger = SETRCPTB.DAT
GRPFile = COMPUTER_DEV
GRPLib = GRPLib\
HELPLIB = HELP\
LBYLIB = DEFLIB\
LogoFile = COMPUTER_DEV
TABLELIB = TABLE\
WIPPATH = Wip\
XDDFile = COMPUTER_DEV
XRFFILE = rel113sm
< DALLibraries >
CompileWhenLoaded = N
< DBHandler:D2EA8199 >
Class = ODBC
CreateIndex = No
CreateTable = No
Debug = No
PassWd = ~ENCRYPTED 1hRFNZEw5ahYdlqi0LMu83Wa0
Server = DocumakerDSN
SubClass = MYSQL
UserID = documaker
< DBTable:COMPUTER_DEV >
DBHandler = D2EA8199
< DBTable:COMPUTER_DEV_USER >
DBHandler = D2EA8199
DefaultTag = UNIQUEIDTAG
UniqueIDTag = UNIQUEIDTAG
UniqueTag = IDTAG
< DBTable:COMPUTER_DEVC >
DBHandler = D2EA8199
UniqueTag = CATALOGID
< DBTable:COMPUTER_DEVD >
DBHandler = D2EA8199
DFD = DEFLIB\carfileblob.DFD
UniqueTag = ARCKEY+SEQ_NUM
< DBTable:COMPUTER_DEVL >
DBHandler = D2EA8199
UniqueTag = DATE+TIME
< Environment >
DO_LOGON = Yes
FSISYSINI = fsisys.ini
< GenData >
ClearMsgFile = Yes
< Key1Table >
COM = COM
< Key2Table >
BU = LOB
< Library:COMPUTER_DEV >
CATALOG = COMPUTER_DEVC
DBTable = COMPUTER_DEVD
LBYLogFile = COMPUTER_DEVL
USERFile = COMPUTER_DEV_USER
< LibraryManager >
Class = GA;Georgia resource
Class = TX;Texas resource
Class = MD;Maryland resource
DefaultPromoteSelectedOn = No
LBYLogFile = DEFLIB\lbylog.bdf
Library = COMPUTER_DEV
Mode = DEV;Development
Mode = TEST;Test
Mode = PROD;Production
Project = P001;Project 001
Project = P002;Project 002
Project = P003;Project 003
PromoteReqClass = No
PromoteReqDesc = No
PromoteReqMode = No
PromoteReqProject = No
PromoteReqStat = No
Status = TEST;Needs to be tested
Status = FAILED;Failed testing
Status = PASSED;Passed testing
Status = PROMOTED;Has been promoted
< MasterResource >
BaseDef = <Config:Computer> BaseDef =
BDFFile = <Config:Computer> BDFFile =
BDFLib = <Config:Computer> BDFLib =
CompLib = <Config:Computer> CompLib =
DalFile = <Config:Computer> DalFile =
DDTFile = <Config:Computer> DDTFile =
DDTLib = <Config:Computer> DDTLib =
Deflib = <Config:Computer> Deflib =
DictionaryFile = <Config:Computer> DictionaryFile =
EDLLIB = <Config:Computer> EDLLIB =
FieldBaseFile = <Config:Computer> FieldBaseFile =
FNTFILE = <Config:Computer> FNTFILE =
FontLib = <Config:Computer> FontLib =
FORFile = <Config:Computer> FORFile =
FORLib = <Config:Computer> FORLib =
Form7x = <Config:Computer> Form7x =
FormDef = <Config:Computer> FormDef =
FormFile = <Config:Computer> FormFile =
FormLib = <Config:Computer> FormLib =
FormsetTrigger = <Config:Computer> FormsetTrigger =
GRPFile = <Config:Computer> GRPFile =
GRPLib = <Config:Computer> GRPLib =
HELPLIB = <Config:Computer> HELPLIB =
LBYLIB = <Config:Computer> LBYLIB =
LbyScriptLib = <Config:Computer> LbyScriptLib =
LogoFile = <Config:Computer> LogoFile =
LogoLib = <Config:Computer> LogoLib =
TABLELIB = <Config:Computer> TABLELIB =
TablePath = <MASTERRESOURCE> TABLELIB =
XDDFile = <Config:Computer> XDDFile =
XRFFILE = <Config:Computer> XRFFILE =
< ODBC_FileConvert >
COMPUTER_DEV = COMPUTER_DEV
COMPUTER_DEV_USER = COMPUTER_DEV_USER
COMPUTER_DEVC = COMPUTER_DEV_LBYC
COMPUTER_DEVD = COMPUTER_DEV_LBYD
COMPUTER_DEVL = COMPUTER_DEV_LBYL
< PRINT_BATCHES >
BATCH1 = C:\FAP\DLL\Computer\DATA\Client.bch
BATCH2 = C:\FAP\DLL\Computer\DATA\Office.bch
< Printer >
EnableBatchBanner = No
EnableTransBanner = No
< Printer1 >
Port = C:\FAP\DLL\Computer\DATA\~DALRUN PDFNAME
PrtType = PDF
< Printer2 >
Port = C:\FAP\DLL\Computer\DATA\Office.pdf
PrtType = PDF
< PrinterInfo >
Printer = Printer1
Printer = Printer2
< Printers >
PrtType = PDF
< PrintFormset >
LogFile = C:\FAP\DLL\Computer\DATA\LOG.LOG
LogFileType = XML
MultiFilePrint = Yes
RCBDfdField =
< PrtType:EPT >
KeepFile = Yes
Message = This is a testing message sent automatically from Oracle Documaker.Attached the generated document.
MessageFile = C:\FAP\DLL\Computer\INPUT\ArumugamFormat.mhtml
PageNumbers = No
PrintViewOnly = No
PrtType = PDF
RecipFunc = CUSSetMailRecip
RecipMod = CUSW32
Subject = Oracle Documaker Auto Email Test by Cognizant
< PrtType:PDF >
     Device = C:\FAP\DLL\Computer\DATA\TEST.PDF
     Bookmark = Yes,Page
     DownloadFonts = No,Enabled
     Module = PDFW32
     PageNumbers = Yes
     PrintFunc = PDFPrint
     SendOverlays = No,Enabled
     SendColor = Yes,Enabled
     Class = PDF
     DisplayMode = UseOutlines
     PaperSize = 0
     Linearize = Yes
     SubsetAllEmbeddedFonts = Yes
     ForceColorBitmaps= No
     FontCompression = 2
< RECIP_MAIL >
Client = ~DALRUN pass1.dal;
Office = [email protected];
< Userinfo >
File = COMPUTER_DEV_USER
<PDF_Encryption>
KeyLength = 40
OwnerKey = c07f9e259f8307d71dd5f903dbe9c9edde208b9a36d973588b738bff7f304b08
UserKey = ~DALRUN pass.dal
Still we are getting the file name with *088hMknUyYSFoquAWsxDxwTNtpgIy7Bhy-1p3_UCFVqXW.pdf(like)*
Regards,
Balaji R

3 step process in posting parked documents. Is this possible?

Good day to everyone,
Our client requires a 3 step process when posting documents. The step should be as follows:
1. Creating a Parked Document. (can be a balanced or one-legged document)
2. Completing a Parked Document.
3. Posting a complete document.
Currently in our setting, the users can bypass step # 2 and immediately proceed to step # 3 which is to post a parked document. There would be no problem for a one-legged or unbalanced document since posting would not be possible for documents which are not balanced. But for a complete and balanced document, the user can right away post it using FBV0.
Is there a way we can implement a 3 step process wherein we will assign a new document status (Complete) before it gets posted in FBV0? Thanks and any help or comment would be greatly appreciated.

Thanks for the reply. The suggestion you posted is brilliant, however, it would make things a bit more complicated for our client. I am looking towards a simpler solution, probably a validation of some sort.
I was thinking of utilizing the Parked-Complete-Posted document status in F-65. If somebody knows how I can restrict direct posting of "Parked" document status without going thru the "Complete" status via FBV0, then I would greatly appreciate the help.

Any step-by-step guide for implementing intermediate event?

Hi All,
I am trying to implement intermediate event in my BPM and so far I have created:
1) An intermediate event
2) WSDL file
3) A message trigger
But I am not getting how to proceed further. In the following document I found that a context DO needs to be used: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0369539-e876-2d10-ef93-8f30e112ee6d?quicklink=index&overridelayout=true
But I am not sure which context it is referring to?
Is there any step-by-step guide to implement this? or any wiki link?
Ameya

Hi Ameya,
Follow below steps:
1. Create WSDL file
2. Create an intermediate event in process modeling screen
3. Click on Intermediate event> Properties>Event Trigger
4. TRIGGER Drop Down> New
5. Give Name to your Message Trigger>Next
6. SERVICE dropdown>Select the WSDL created> Finish.
And I suppose they have mentioned Data Object for using it in coorelation condition.
Correlation condition is a boolean test which should be True(default) for the ntermediate message to be triggered.
As there will be mutliple process instances, when PI (in your case) trigger the intermediate event (consume WS) we can give a correlation conditon to check whether it is for the right process instance.
In you case you can store the Request ID in BPM DO, and also request it from PI while consuming WS and validate it in correlation condition.
Regards,
Unni
Edited by: UnnikrishnanSreekumar on Oct 13, 2011 12:51 PM
Edited by: UnnikrishnanSreekumar on Oct 13, 2011 1:00 PM

I have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application

i have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application was not found in the location /Applications." can anyone give me step by step instructions? i would hate to call the geek squad!!!LOL

and what's a firewire port? how do i know if i have one?

Oracle report 'XML Report Publisher' error 2 step process

We're getting error 'Invalid UTF8 encoding' when running the above report. This is a second step of the two step process when creating XML output in Oracle Apps. The first step is report 'PO Output for Communication'. This one error out with the following warning:
Beginning post-processing of request 4487540 on node TYBU093047 at 07-OCT-2008 12:49:17.
Post-processing of request 4487540 failed at 07-OCT-2008 12:49:17 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Any information on this is greatly appreciated.
Edited by: user1733606 on Oct 7, 2008 11:27 AM

review this
http://solutionbeacon.blogspot.com/2007/07/simple-tutorial-for-publishing-fsg.html

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

After you change the account settings as I described below hold your finger on any app until they all wriggle, then tap the "-" on each purchased with her Apple ID. Press the HOME button when done. Then go to the App Store and buy or download the apps you want.

Step-by-step process of grouping Items in Category Sets and more accurately into the correct Category

Honestly, I have never had a customer ask me 'how' do I identify which Items go together in a specific category. I am thinking I start with the Functional Area (Inv, PO, OM, WM, etc..) attributes, and start the grouping there. The customer is asking for "best practices" - any input would be appreciated.
I have a fresh install of Oracle Inventory, Purchasing, Order Management, Service - We have 2,000,000 part numbers.
How have you instructed your customers/clients (both Internal and External) in the PROCESS of categorizing all of their Items?
What is the Step-by-step process of grouping those 2MM items into accurate Category Sets and more accurately into the most correct Category.
I would 'assume' it would start with some analysis with all the Items listed with all the item attributes, and start with ECCN (for example) or Item Type grouping. Then...(?)
Thanks!
rd

No answer to No.1 but I really want to find it out too.
No.2
If you already know list of the categories & ID you can manually create a list of checkboxes
<input type="checkbox" name="CAT_Category" value="89081" />
<input type="checkbox" name="CAT_Category" value="89082" />
<input type="checkbox" name="CAT_Category" value="89083" />
something like that should work

I have a box of dvds, and i would like to transfer them onto my computer on itunes and then onto my iPad. Does any know how to do this in a step by step process?

I have a box of dvds, which I would like to transfer to my intunes account on my laptop. I then what to transfer the dvds to my ipad. Does anyone know how to do this in a step by step process?

If you have an iPod Touch running iOS 4.3.3 or later, you can download the songs in the purchased tab of iTunes on the iPod.
http://support.apple.com/kb/ht2519

Step by step process to upgrade EP 6.0 to EP 7.0

Hi all,
Can any one plz tell me the process of EP7.0 Upgradation?
EP7.0 is newly installed on the Other System.
=> I need information regarding the initial System Configuration settings.
=> can we transport the users/groups from EP 6.0 System to EP7.0 System?
=> Step By Step process of the integration of portal content into EP 7.0.
Thanks and Regards,
Visweswar

Hi,
All the upgrade information is available at http://service.sap.com/instguides -> Upgrade.
Also check the Upgrade Master Guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a1a0eb43-0b01-0010-23aa-908cc4eaabcd
Regards,
Praveen Gudapati

I have followed your 5 step process to load elements 13 and it does not work. It bears no relationsip to what comes up on my computer. I have probably spet 10 hours trying to make elements 13 operational. I have down loaded win64 7z and win64exe three

I have spent over 10 hours trying to upgrade elements 11 to elements 13. The 5 step process you sent me last night bears no relationship to what comes up on the computer screen. I have downloaded win 64 7z and win exe to no avail--nothing happens. What do I do??? How do I do it. I am an old man an do not understand computer talk. I need basic English. I really need someone to call me at 972-403-1515 and walk me through the process.
In addition you are now charging me for two programs---I only need one. How do we correct that?

This is a community forum, not Adobe. Volunteers can often help but as you have a number of problems I would recommend you contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

Step by step process to implement SSL

Similar Messages

Maybe you are looking for