Steps to activate Embargo for a country
Hi Experts
Please let me know how to activate embargo for a country.
How do I change the validity period of country specific information .
Thsnkd & Regards
Amit
Hello Amit,
You should be able to maintain Embargo block for a country in transaction /n/SAPSLL/CNTRY. You can also set the validity period of the embargo in the transaction.
The customising steps and processes are outlined in the GTS configuration guide and also in the IMG documentation specifically under the Embargo customising: SPRO > IMG>SAP Global Trade Services > SAP Compliance Management "Embargo Check" Service ...
Hope this helps,
Kind Regards
Ann Marie
Similar Messages
-
Activate WF for incoming post item Records Management
Hi.
Could anyone tell me the steps to activate Workflow for incoming post item (Records Managemet).
I'm traying with this Standard Task
TS78800015
TS78800013
Regardshi Virgilo,
WF activation has two main steps for initial setup:
go to swu3 & use the automatic workflow generation to do the initial setup of workflow in system
u will need to ensure that the mail traffic to & fro works from the system. This is also one of the setting in SWU3.
Once this is done, u shud be able to see the mails arriving in r/3 inbox, in scaseps inbox plugin.
Further customizing like automatic workflow for processors etc can be found in RMPS_CUSTOMIZING.
thanks & regards,
Pragya -
Steps to setup duplex for a pdf
Hi,
I have tried to make LC Output create a pdf with duplex active, but I cannot make it work. I hope you can help me, as it is a demand by the customer.
My Process:
LC Output create pdf, watermark can be put on with Assembler, will be printed to a PS printer (use OutputService > sendToPrinter)
I have tried:
- set up in LC designer under PDF Print option => I then check pdf in Acrobat > properties but says simplex
- set up an XCI with
<pagination>duplexLongEdge</pagination>
<paginationOverride>none</paginationOverride>
=> I then check pdf in Acrobat > properties but says simplex
- I have read about XDC files, but want to know for sure before I go that way because time is limited and seem complex. We use Lexmark printer c782.
I hope you clever LC user og Adobe specialist can give me help to the steps to solve this hurdle. I want my customer to be happy and to save trees
Look forward hearing you ideas for an solution
/Thomas GroenbaekHello Amit,
You should be able to maintain Embargo block for a country in transaction /n/SAPSLL/CNTRY. You can also set the validity period of the embargo in the transaction.
The customising steps and processes are outlined in the GTS configuration guide and also in the IMG documentation specifically under the Embargo customising: SPRO > IMG>SAP Global Trade Services > SAP Compliance Management "Embargo Check" Service ...
Hope this helps,
Kind Regards
Ann Marie -
Fusion drive solution to activate Office for Mac 2011
Activating Office 2011 is a known issue for Fusion Drive Macs.
Activation is tied to the drive. According to Microsoft the solid state part of the Fusion Drive generates a new disk id every time the Mac is started. So Mac Office thinks it a new system at each startup and will require activation.
This solution was suggested by Microsoft Support. Please let us know if this works for you.
Follow the steps below to remove the “Thunderbolt bridge”:
1. Click on the Apple icon and click on “System Preferences”
2. Click on “Network”
3. Look for “Thunderbolt Bridge” on the left side.
4. Highlight the Bridge and click on the “-” sign to remove it.
5. Restart the computer and enter the Product key for Microsoft Office. Restart again.
You can also leave comments here:
Fusion drive solution to activate Office for Mac 2011I don't normally advocate users re-install Office to fix an issue but in your case I think it's worth a try. The Mavericks update seems to have fixed the issue for most users. I would suggest the complete removal rather than the simple removal of dragging the Office folder in Applications to the trash.
Office for Mac 2011: Remove Office
http://www.officeformachelp.com/2012/12/office-for-mac-2011-remove-office/ -
How to stop/deactivate CLC (Credit Limit Check) functionalities for specific country
Dear Experts,
We are working in TM 8.1 which is integrated with ERP system. Currently we do not have any restriction at TM system level to stop processing the order if CLC limit is exceeding. But we are in process of adapting the same with TM 9.1 version.
Now, we are in process of upgrading our ERP system and going pilot live for one country initially. We no more want to process the orders/invoices for which CLC limit is exceeding in the latest ERP system for live country for some time. Therefore our business wanted to deactivate or stop the CLC functionalities for specific country or sales organization within TM system, so that statistical record (Internal order) can not be created in ERP. Thus further processing can not be done in ERP.
Could you please provide some important insights how to achieve the expected?
Thanks,
Bharath.Dear Dawson,
Thanks for your reply.
I have done the required analysis and arrive at below solution.
Prior to that answering to your question, we are sending CLC to ERP upon activation of FWO. We have a customer specific button 'ACTIVATE' on every FWO UI. Entering CLC amount in Business partner tab is pre-requisite for successful activation of FWO.
Coming to my solution which I have proposed: For sending the CLC to ERP, we have configured a PPF action definition with schedule condition and processing method call. Currently this PPF action definition is executed successfully upon activation of FWO for all.
Here we will put a IF condition on sales organization / country for which we do not want to trigger this action, then if it is satisfied with our expected values we will stop further execution. This way we can avoid action triggering. ( I had already checked in debugging and confirmed the behavior).
I believe, my solution is correct.
Please advice if any other better way of doing it.
Thanks,
Bharath. -
I bought a used galaxy prevail. i'd like to activate it for my verizon account.
i bought a used galaxy prevail. i'd like to activate it for my verizon account.
The Prevail is a Boost mobile phone, and likely won't work on Verizon's network. Although both use the CDMA technology, Boost uses different "bands" - you can enter the device ESN or IMEI here: http://www.verizonwireless.com/b2c/nso/enterDeviceId.do in step 2 to see if it can be activated on Verizon.
-
Steps to activate Business Content
Hi,
Plese tell me the steps to activate BI content in SAP NetWeaver 7.0Hello,
Please search the forum before posting the thread, kindly go through the following document for detailed steps....
http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Thanks,
Pavan. -
ESS/MSS for International Country grouping
Hi all,
Scenario: We are implementing Portal ESS/MSS on ECC6 and have loaded the Best Practices with the below components.
SAP NetWeaver Portal 7.0 SP12 with the following additional software components
BP ERP05 Common Parts 1.0 SP08 (BP_ERP5COM)
BP ERP05 ESS 1.0 SP08 (BP_ERP5ESS))
BP ERP05 MSS 1.0 SP08 (BP_ERP5MSS)
SAP ESS 600 SP08 (SAP_ESS)
SAP MSS 600 SP08 (SAP_MSS)
SAP PCUI_GP 600 SP08 (SAPPCUI_GP)
Now, the ESS and MSS is to be implemented for a Country Grouping 99 - International and not any specific country.
Problem: The iViews are not loading for International, when the R/3 config setting is for 99. While it seems to be calling the right iViews for 10 - USA or 12 - Belgium.
Can you please assist on how to link up the Users to the roles and correct iViews.
Thank you.
SandeepHi Anil,
Steps in brief:
0. Once you have implemented the Busin. Packages from SAP you will get all the Portal Content which is country specific. This is the same content being called from R/3 using country specific resources.
1. Go to R/3 -> Pers Admin -> ESS -> General Settings -> Home Page for SS -> Services -> Define Country Srvcs.
Go into Define Country specific srvcs and you will see the view V_T7XSSSERSRVCG
2. This table contains all the country specific implementations offerred by SAP. You can use some of these and copy/create for CGrpng 99 as below. This should be based on what services you want to use on ESS.
EMPLOYEE_PERSINFO_ADDRESS 99 EMPLOYEE_ADDRESS_BE_SERVICE
EMPLOYEE_PERSINFO_ADDRESS05 99 EMPLOYEE_ADDRESS_BE_SERVICE05
EMPLOYEE_PERSINFO_BANK 99 EMPLOYEE_BANK_BE_SERVICE
EMPLOYEE_PERSINFO_BANK05 99 EMPLOYEE_BANK_BE_SERVICE05
EMPLOYEE_PERSINFO_FAMMEMBER 99 EMPLOYEE_FAMMEMBER_BE_SERVICE
EMPLOYEE_PERSINFO_FAMMEMBER05 99 EMPLOYEE_FAMMEMBER_BE_SERVICE05
3. Also make sure your CGrpng in Pers Area/ PSA is set to 99, basically Employee shold belong to 99.
Hope this helps in figuring out a few more things !!
Good luck
~ Sandeep -
Webdynpro ABAP application for specific Country
Hello Consultants
We have developed a custom Webdynpro ABAP application and the service is working alright.
The probelm is that this service is to be enabled only for one Country i.e. India and this should not be visible for other country users.
I have created resource, service and country-specific service for this application and linked the country-specific service to India. Even after doing this am not able to stop the availability of this service other countries.
Shall be thankful for an immediate response.
S. ChandrasekaranDear Bharath,
I am no expert on the topic but i can definitely answer your last question.
Yes, Webdynpro ABAP applications are available in the latest versions.I have seen this in ECC Enhancement Package 3 (ECC 603).
I can't really tell you much abt PCRs but the Requisition forms(SRQ3) in 603 are based on WDA application.If interested you can check the Recruitment work center in MSS.
Also, please ensure that the relevant Business Function/Services are activated when using the enhancement packages to see the relevant functionalities.
I think you need to activate the HCM administrative services BF available as of 602 . This definitely uses webdynpro ABAP applications in the portal.
Regards,
Sowmya
Edited by: Sowmya Kadambi on Dec 23, 2008 3:23 PM -
Life and work event for any country other than US.
Hello,
I have to implement ESS for UAE.
In ESS we did all country specific settings and thus our "Address" application in Personal Information section is working fine now.
Now we have to implement the life work event section "My first days".
There we are getting "Address" application in left panel.
Now when I am clicking in this application it shows me error :
Country/Structure do not match application country
So which means it requires some settings in guided procedure end in portal.
I am assuming ....Because our address application is already working fine in Personal Information section so same should also work in My first days section using existing configuration settings of R/3.
So I went through below wiki page :
http://wiki.sdn.sap.com/wiki/display/profile/LifeandWorkEvents(LWE)-Other+Countries
In the above page there is a section to update parameters in guided procedure process for address.
GP Context = X
PT Family Service = EMPLOYEEPERSINFO_FAMMEMBER_PT_05 - this parameter is going to be created in the backend (transaction PTARQ)._
I am making changes to existing Life and Work events - US only. (for testing purposes)
In my case I only updated the Address service :
sap_xss_service
sap_xss_menusrv
With the address service from R/3 which is in my case running under personal information section.
But still I have been receiving the same error under My First Days address section.
In the above wiki page there is a line as below :
VERY IMPORTANT: the parameters need to give in action, after in the block, after in the main block, and after in the process (THIS IS CRUCIAL).
I feel this is where I am missing something.
What does this line mean...
Can anybody help me out with the same...if you have implemented life and work event for any country other than US.
Edited by: Saurabh Agarwal on Apr 10, 2011 3:03 PMHello,
In continuation of my question I have also been following below sap Note :
929447 - Adopting Life and work events for countries other than US
In the above note there us a section which confuses me :
Page 3 - Home and Area page customizing
Step2 - In this step they say that we have to make an entry in
IMG node access: Cross-applicaiton components -> Homepage framework ->Services -> Define Country-Specific Services (Add Entries) - (Table:V_T7XSSSERSRVCG)
as
Service Key:EMPLOYEE_LIFEWORK_FIRSTDAYS
Country grouping: 01
Link Resource:EMPLOYEE_LIFEWORK_FIRSTDAYS_DE_SERVICE
I believe it should not be for FIRSTDAYS....it should be about service which is actually throeing the error "Countr/structure does not match"
i.e. in this note case it should be :
EMPLOYEE_PERSINFO_ADDRESS05 -
I purchased Adobe Acrobat Professional and have been trying to activate it for some time. I also had this same program on my previous computer. How do I de-activate it from that computer so that I can activate it on my new computer?
Hi larrygoynes,
To transfer the license from one pc to another the step you have to follow is to 'Deactivate' the license first from the older machine.
To accomplish this you need to Launch Acrobat, go to the 'Help' menu and select 'Deactivate'
On the new machine you can install Acrobat and then use the serial number to 'Activate' the software and this will complete the license transfer.
You can refer the KB Doc: Activation & Deactivation Help
Regards,
Rave -
Activate Monitoring for System
Hi,
when I try to Setup System Monitoring, in the step Activate Monitoring for System can see only the production system, while in the smsy I setup all my development systems too.
How can I do to setup a development system in the Monitoring Setup ?
Thank's in advanced
FrancescHello Francesc,
Go to DSWP-> your solution-> solution landscape maintenance.
right click on the development system and click on the option "put in solution". this will activate your development system also for system monitoring.
please revert back if solved.
Regards
Tripti -
Can't activate iMessage for my phone number.
Can't even activate iMessage for my phone number but it constantly charging me every time am trying to activate it. Same with Facetime but can use with Apple id
Help Please!!!Hello,
For iMessage activation issues, please follow these steps via this link : http://support.apple.com/kb/TS4268
If your issue still happen after that, you will need to contact the Apple Support in order for them to investigate further. -
Activate Workflwo for document parking
Dear Experts,
Can anyone tell me the step by step procedure to activate workflow for document parking .
The scenario is as under :
I want message to be sent to the concerned authority once an invoice document is saved as complete. The user should then be able 2 check /change & post an invoice .
Regards
anisDear Experts,
Can anyone tell me the step by step procedure to activate workflow for document parking .
The scenario is as under :
I want message to be sent to the concerned authority once an invoice document is saved as complete. The user should then be able 2 check /change & post an invoice .
Regards
anis
Hi, Anis,
You can use work flow template WS20001003. In customizing for material management--> Logistics Invoice Verification-> Document Parking----> Activate Workflow Template for document completion.
Regards,
Tushar Patankar -
Activate EWA for satellite system in 3.2
Hello,
We have solution manager 3.2 with all the latest patches, and have included the satellite system in the landscape and generated the RFC's. Need to activate EWA for the system. Have defined a Solution. Need to how do you include a system in the solution because when i click on Solution directory --> setup EWA, it gives a message,
"NO system found in landscape"
Any suggestions / inputs are appreciated.
Thanks and cheers,
ChetanHI ,
Kindly follow the below steps for the EWA activation:
1)go to transaction SMSY enter your system details and check the system data is updating with the SLD (check this option in SMSY_SETUP)
2)then define logical component fo rthis system then define this logical component under solution
3)you will be having a option under that EWA configuration click on EWA active (check )
and check the Send to SAP if you want the EWA repor thas to reach SAP once the Report is Red after analysis done in Solman by the Job SMS*
4)then go to SDCCN in the solman then trigger the activation of session data for the particular sysytem if the RFC SM_SIDCLNT<CLNT>_back exists then task created in the satelite system for the session data to Solamn
5)then check the EWA report and do processing in the operation for that solution
Best Regards,
Srekantha Reddy.M
Maybe you are looking for
-
Help!! ipod touch 2nd gen (8gb) is running by itself!
I just got a ipod touch 2nd gen (8gb) from a friend. This ipod has some problem.. it is running by itself! When I on it, and for example go to Settings, it will just randomly go to a next selection as if responding to my selection but I never touch a
-
Can my computer boot Mac Os 8.6 at all?
My USED SECONDHAND Imac G3 400MHZ blueberry did not come with any disks at all. I have a copy of Mac Os 8.6 for an older IMAC. I got the CD for free which won't boot on it. Because I don't have any cds for it, I would like to know if there is a way I
-
I would like to have 2 iCloud accounts on my Appleid account. While I would like to share apps and music with my husband, we need to maintain separate contacts and calendars. How do I set up the second iCloud account?
-
Images not Displaying (Showing as a black box) in Excel 2011 for Mac
I'm using Office 2011 for Mac, on a 2013 iMac with Mavericks (10.9.4). I have a .jpg image I'm trying to insert in the footer, and it is only showing as a black box. I even tried saving as a .pdf, and it still shows as a black box. How can I fix so t
-
On the ipad2, can I access itunes library without first opening the Itunes store
I commute with an IPad2 and there are times I cannot pick up an Internet connection. Is there a desktop shortct that would let me get into the Itunes Library without going through the Store, which will not open when there is not Internet connection?