How assign 7 cost centers to one cost element.

hi
how assign 7 cost centers to one cost element.
Ex: FUEL can use 10 departments.  how to assign this cost centers to one cost element.
Thank you.
Ashok kumar

Hi Anil,
At the time of posting fuel expenses you need to have 10 line items for each seperate cost center    or
You can post to a one cost center inturn you can use Distribution or Assessment for re allocating to other cost centers.
Regards,
Murali

Similar Messages

  • How to create cost element in controlling

    how to create cost element in controlling for Direct meterail.
    i have to create for each materail or on rm consumption is enough
    please give me replay
    thanks

    Hi Nagaraju,
    First you create the required account as cost element through FS00 and select your gl account and edit cost element and give 1 in cost element category.
    Afterwards in OKB9 You create the cost element whether it is required for Bus Area mandatory, profit centre mandatory and Valuation area is mandatory.  Based on your selection you have to assign 1, 2 or 3.  Ex. You have selected for consumption account profit centre is mandatory.  You give 3.  and you have to assign the cost centre against profit centre.  Then automatically your consumption will post to the cost centre.
    BSR

  • How to extend cost element to controlling area?

    Hello all,
    I created a new cost element via FSP0 and then created cost element via KA01.
    Now whwen I am trying to do cost center assignment in OKB9, it throws me error that cost center in controlling are not exit for today's date with error message KI217
    I made sure the cose center's validity date cover's today, so why does it show me that error?
    Do I need to extend the cost center for perticular controlling area? if yes than how acan I do it?
    Regards,

    Hi,
    if you want to extend validity period for Cost centre - KS02  & for Cost element KA02 and select particular Cost centre & Cost element - go to edit in main menu - select Analysis Period - press F6 - and change valid period as per your requirement
    but we can't change one controlling area to another controlling area ,
    if you do not want use cost centre , cost element whatever already created - just go and Block/lock for posting
    Thanking you
    Regards
    Mahesh

  • How to move Profit centers from one hierarchy to another.

    Hi All - In Standard hierarchy in our Profit center accounting, we have in KCH6N as below and doing posting to these successfully.
    1. C1470 - 000001470 Profit center
    2. C1472 - 000001472 Profit center
    Now for some Business reason, we need to temporarily move above said profit centers in their hierarchy to another one C1410. So Users could post a journal entry and then move the profit centers back to their current location.
    After we make the change, It should be
    C1410 - 000001470 Profit center
    C1410 - 000001472 Profit center
    Can you please suggest me how to move the Profit centers from one hierarchy to another. Can you please let me know how to make this change.
    Thanks

    Hi Hoysala,
    This is not the best practice, to change profit center hierarchy node to another node, just for the sake of JV.
    If you have to allocate a cost/revenue from one cost center/profit center to another, I would advise you to use manual allocation/distribution  process, as per your business reason (Profit Center Allocation/Cost Center Allocation), rather than changing hierarchy nodes.
    You can use 3KE5-Execute Actual Assessment and 4KE5-Execute Actual Distribution from Profit Center 1470/1472 to the profit center under node C1410, without moving profit center from one node to another.
    http://veritysolutions.com.au/2012/07/03/overhead-allocations-in-sap-new-gl/
    Regards
    Javed

  • Default account assignment in cost element creation

    hi,
    in the cost element creation transaction (KA01) I need the default account assignment to be the WBS element. but in the transaction only cost center and order is showing as dafault account assignment, how can I include the WBS as cost object?
    Thanks
    Edited by: gayani premawardena on Sep 3, 2010 12:24 PM

    Hi
    If you are aware of FI substitution or validation, it works the same way
    1. Go to OKC9 and click on New entries
    2. Enter your contr area and choose Event = Line Item and Save.. It would ask for a transport request
    3. Now click on the magnifying lens icon, then drill down on cost accounting > Line Item. Now click on Create Substitution icon and give it a name
    4. Now click on Create Step and write your substitution by choosing fields from the COBL structure
    It should like like, Prerequisites: IF COBL - BUKRS = XXXX and Cost Ele = YYYY,
    Action to be taken if Pre-req is met - Substitute WBS = ZZZZ
    Regards
    Ajay M

  • How to make cost element field appear when create network activity service

    Hi All,
    Please help. We create a project ,wbs and network activity using external service. How can we make appear the cost element when the service master appear. The system require cost element but we cannot see the cost element field.
    Steps :
    *. CJ20n.
    *. Create WBS and network header
    *. Then network activity for external service.
    *. Then it appears service specifications : ext specs Task List Maintain
    *. I Put Service no, and the error message appears :
    Please enter a cost element
    Message no. SE121
    *. But we can find where the cost element is. It seems the field disappear.
    PLease help.
    Thank you.
    Nies

    Hi,
    Yes. It is already blank. But the cost element field still not appears when we create activity service. It shows :
    Please specify a valid account assignment
    Message no. SE181
    Diagnosis
    You have entered an account assignment category in the document item for which an account assignment is mandatory.
    All account assignment lines in the service specifications either have been deleted or are inactive (e.g. account assignment lines of a contingency item).
    Procedure
    Please enter an account assignment for the services or value limits.
    The entry of an account assignment is unnecessary if you choose "unknown account assignment" in the document item.

  • URGENT - HOW TO TRANSPORT COST ELEMENTS

    How do we transport cost elements from one client to another. I went on OBY9, and transported them but cost elements did not get transported. Please help me.
    Urgent

    hi Lakshmi,
    you can do in transaction OKE6.
    ec

  • How to get Cost element for a component in co03 cost analysis report

    Hi,
    I'm using table COSP to find the quantity for a production order component.  However, I need to identify the cost element first to get the unique data.  In CO03 cost analysis report, there is cost element for the component.  Does anyone know how to get it ?
    Thanks.

    CSKA stores the basic info about the cost element
    There is no data in CSKB.
    I'm trying to use different tables to get the cost element.
    AUFK, AFKO, AFPO, RESB, ...but no luck...

  • Down payment problems Customer/Vendor - Assign default cost elements

    Helo Gurus,
    ive tried to execute TC: F-29 Customer and F-48 Vendor down payments.
    I enter all the data needed and additionaly Internal Order.
    Then i get a message saying:
    Maintain default revenue element in controlling area 5000
    Message no. FI661
    Diagnosis
    CO down payment update is active in controlling area 5000.  You must therefore maintain a default cost element and a default revenue element for down payments.
    Procedure
    Maintain the default cost elements for down payments for controlling area 5000 in the Project System implementation guide.
    The maintenance is done in TC: OKEP (project system)
    I created two revenue Cost elements and tried to assign them there, but it says CE are nore primary CE.
    I changed it from revenue to primary, then it says that CE isnt revenue...
    weird stuff
    What could be the problem?
    Regards
    Laurynas

    Hi,
    Please refer to SAP Note 388843.
    Regards,
    Srinu

  • Changing assignment of cost elements to cost components

    Hello,
    I want to assign a cost component to another cost element. Message no. KQ312 Maintenance after deactivating 10 makes cost estimates incomparable appears.
    After the change, isn't it possible to compare the cost estimate anymore at all or just the changed cost components?
    Regards, Jan

    If you change the cost element grouping in your cost component - the standars SAP gives the message that previous cost estimate cost component will not be comparable.. It has got logic because once you do the Actvity price calculation system stores the value as per cost component strcuture in KEPH table . The 40 cost feils in KEPH get dynamically linked as per your cost component.
    So if you want to change it  , you can change it but makesure you run the KSPI again . If you are moving your existing cost element to another group , the previous saves cost component will not display correctly , although all the future cost estimate will show you as per revised strcuture.
    If you not bother about previous cost compoent display then you can change it.
    Regards
    Ranjan

  • PSG- Assign Setlement Cost Element

    We have service and sales order that have settlement rule PSG.  At settlement an  FI posting is made, which are defined in OKG8.
    PA uses the Cost elements (890963) assigned in OKG4 as the source. The PA transfer structure is complete - assigning values to Value Fields (VVC10)
    When this settlement is complete - a Secondary Cost element is assigned to the settlement transaction (870200) and I see it in the Cost Analysis of the Orders
    Where is this  secondary cost element (870200) assigned?
    thanks in advance for help
    Althea

    Found the answer - Allocation Structure which is under Cost object controlling > Period End > Settlement

  • How to delete cost element name from group after deleting the cost element

    Hi,
    Please let me know how to delete the cost element number  from the Cost element group hierarchy.I have deleted cost element but still showing only the CE number---no valid master record.If I d not want this to be visible within hierarchy let me know what should I do.
    Thanks

    Hi
    Go to change cost element group select the cost element click on select tab (3rd Tab from Left) it will take u to new screen in that screen select remove tab (1st tab from left)
    Regards
    Sandesh

  • Functional Area assigned to Cost Elements

    Hi All,
    Where can i see the list of cost elements assigned to different functional areas.
    Thanks in advance.

    Use tr. KA23 for collective processing of cost elements.
    You can use the radio button to display all cost elements, or you want to filter the cost element list for only certain functional areas you can use the option for a Selection Variant.  Just click on the Create icon and input your functional area(s) and save the variant and give it a name and description.  Then return to the KA23 screen and use F4 help or input the variant you saved. 
    After you execute the report and the list is returned, you may not see functional area immediately by default.  Simply use the icon to change the layout and send the functional area field from the column set on the right to the displayed columns on the left.
    If you have access to tr. SE16 or SE17 you can also simply look at the table contents of table CSKA to see the assignments of functional area to cost elements.
    Best regards,
    Jeffrey Holdeman

  • How to find cost element group linked to account number

    Hi all,
    I have following scenario.
    I have account number and i want to find out it's cost element group.
    In t-code KAH3 when i enter cost element group i get all the account number in that group.
    But the problem is that i have account number and i want to find out in which cost element group this
    account number belongs.
    Is there is any fuction module from which i can get cost element group from account number or from which table i can fetch cost element group depending upon the account number.
    Thanks in advance.
    sachin

    hi,
    check this function module.
    BAPI_COSTCENTERGROUP_GETDETAIL
    table - SETLEAF.

  • How to create cost element in mass

    Hi All
    I want to create cost element in mass. i created to new GLs . and now i want to create there cost elements in more than 60 company codes . is there any way to create it in mass . please suggest with t.code
    Thanks in Advance
    Nikhil

    Yes you can create cost elements in a batch session automatically.
    Please use tcode OKB2 for default settings. 
    Define batch input session - OKb3
    Execute batch session : SM35
    Regards

Maybe you are looking for

  • T420i screen brightness issue

    This one is a little hard to explain. I should note that this only happens when I am not plugged in with an AC adapter. On my brand new Thinkpad, my screen's backlight will brighten when there is a lighter image on the screen and dim when there is a

  • WLC Applying cached RADIUS Override values for mobile

    Hello! We have a WiSM2 (version 7.4.110.0) with approx 200 APs. We are doing RADIUS authentication via a PacketFence backend. Everything usually works fine, but we are having an intermittent issue... The WiSM2 gets its VLAN assignment for a client fr

  • ABAP program for BAPI and convert DB into XML

    ABAP program for BAPI and convert DB into XML Thank you, Regards, Jagrut BharatKumar Shukla

  • Why  there is a blank PERSNUMBER record in ADR6 For some ADDRNUMBER

    I am fixing a bug and get the key point ,if i delete the select condition PERSNUMBER  = SPACE, My problem will be solved , Code as follow: select single  * from  ADR6          where ADDRNUMBER  = ADRNR_SP          and    PERSNUMBER  = SPACE         

  • What is the use of maestro tool &unix in BW (production system)

    Hi SAPBW guru's, I have one query regarding .in what is the use of maestro tool &unix in BW (production system) - my ponit is i schedule the query in SQ02 in back ground after wards i want to schedule in UNIX &Maestro tool .. PLZZZZZZZZ,help me regar