Still about domain alias and domain migration

Our company is under a domain name transition. Currently, our domain is lab.D.com, and we are moving to aaa.com.During the transition, we wish both domains could work for us for a long time.
I added a domain alias aaa.com for our domain lab.D.com, the ldif shows:
dn: dc=aaa, dc=com, o=internet
objectclass: alias
objectclass: inetDomainAlias
aliasedObjectName: dc=lab, dc=D, dc=com, o=internet
dc: aaa
after restarting msg server, I can send email to [email protected] which is acutually [email protected]
However, this is only half-way to my goal. I wish our emails at receivers' mailboxes were [email protected], not [email protected], if we send emails though loging in web mail typing [email protected] in the user ID box, or by creating [email protected] accounts in MS Outlook.
===> Is there any way to do it?
===> can [email protected] account be created in MS Outlook?
In another post about domain migration, you suggested:
If you want to stop using the old domain, and make the new domain your "default domain", that's a little harder. It involves several steps:
1. changing all the mail addresses.
2. changing the "default domain" settings everywhere.
===> I wonder, how to do it? is there any command? ldapmodify?
as an alternative approach, if we decide to change our email addresses to [email protected] first,
===> will emails sending to either [email protected] or [email protected] arrive at users who are still in the lab.D.com, if I only change all the mail addresses' domian part to aaa.com since I have added domain alias aaa.com?
and, I do not think sending emails from [email protected] to the internet would be a problem, right???
The iMS we use is iPlanet Messaging Server 5.2 (built Feb 21 2002), Directory Server is 4.16 which are very old versions :(
Thanks.

I make no claim to be a programmer, nor am I expert
with ldap commands.
I know of no easy way to change all, other than
export to ldif, and use a global change with a text
editor, and then re-import.So, db2ldif -> change in text editor -> ldif2db, right?
Another question here is about Direct LDAP.
I enabled Direct LDAP.
aaa.com is the domain alias to lab.oldD.com (our old domain).
I also have changed user alas' email addresss from alas@ lab.oldD.com to [email protected] and added mailAlternateaddress for alas as [email protected], as you instructed in previous posts.
However, whenever I click "send" either to aaa.com or lab.oldD.com, it shows errors, for examples, - "Returning unknown or illegal alias: [email protected]", "Returning unknown or illegal alias: [email protected]"
The log shows:
19:17:27.62: mmc_address_to_tree: Parsing address.
19:17:27.62: Address: "user@[127.0.0.1]" 0x00000000
19:17:27.62: Right default: honey.lab.oldD.com
19:17:27.62: Parsing address with null fixup.
19:17:27.62: mmc_address_to_tree: Returning.
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "$*", literal = "", tag = ""
19:17:27.62: Rewrite: "$*", position 0, hash table -
19:17:27.62: Found: "$E$F$U%[email protected]"
// honey is our email server
19:17:27.62: Rewrite failed, not forward.
19:17:27.62: Rewrite: "$*", position 1, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "$*", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "[127.0.0.1]", literal = "", tag = ""
19:17:27.62: Rewrite: "[127.0.0.1]", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: "[127.0.0.1]", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "[127.0.0.1]", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "[127.0.0.]", literal = "1", tag = ""
19:17:27.62: Rewrite: "[127.0.0.*]", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: "[127.0.0.]", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "[127.0.0.]", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "[127.0.]", literal = "0.1", tag = ""
19:17:27.62: Rewrite: "[127.0.*.*]", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: "[127.0.]", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "[127.0.]", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "[127.]", literal = "0.0.1", tag = ""
19:17:27.62: Rewrite: "[127.*.*.*]", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: "[127.]", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "[127.]", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "[]", literal = "127.0.0.1", tag = ""
19:17:27.62: Rewrite: "[]", position 0, hash table -
19:17:27.62: Found: "$E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon"
19:17:27.62: Mapping: name = "INTERNAL_IP", input = "127.0.0.1".
19:17:27.62: Mapping 2 applied to 127.0.0.1
19:17:27.62: Entry #2 matched, pattern "127.0.0.1", template "$Y", match #0.
19:17:27.62: New target ""
19:17:27.62: Exiting...
19:17:27.62: Final result ""
19:17:27.62: Mapping result:
19:17:27.62: New mailbox: "user".
19:17:27.62: New host: "[127.0.0.1]".
19:17:27.62: New route: "tcp_intranet-daemon".
19:17:27.62: New channel system: "tcp_intranet-daemon".
19:17:27.62: Looking up host "tcp_intranet-daemon".
19:17:27.62: - found on channel tcp_intranet
19:17:27.62: mmc_winit('tcp_intranet','[email protected]','') called.
19:17:27.62: mmc_determine_url beginning with pattern , xadr , mbox , subaddress
19:17:27.62: Queue area size 18871794, temp area size 18871794
19:17:27.62: 4717948 blocks of effective free queue space available; setting d
isk limit accordingly.
19:17:27.62: mmc_address_to_tree: Parsing address.
19:17:27.62: Address: "[email protected]" 0x00000000
19:17:27.62: Right default: lab.oldD.com
19:17:27.62: Parsing address with local fixup.
19:17:27.62: mmc_address_to_tree: Returning.
19:17:27.62: Rewriting: Mbox = "alas", host = "newD.com", domain = "$*", literal
= "", tag = ""
19:17:27.62: Rewrite: "$*", position 0, hash table -
19:17:27.62: Found: "$E$F$U%[email protected]"
19:17:27.62: Rewrite failed, not forward.
19:17:27.62: Rewrite: "$*", position 1, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "$*", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "alas", host = "newD", domain = "newD.com", litera
l = "", tag = ""
19:17:27.62: Rewrite: "newD.com", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "newD.com", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "alas", host = "newD", domain = ".com", literal =
"", tag = ""
19:17:27.62: Rewrite: "*.com", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: ".com", position 0, hash table -
19:17:27.62: Found: "$U%$H$D@TCP-DAEMON"
19:17:27.62: New mailbox: "alas".
19:17:27.62: New host: "newD.com".
19:17:27.62: New route: "TCP-DAEMON".
19:17:27.62: New channel system: "TCP-DAEMON".
19:17:27.62: Looking up host "TCP-DAEMON".
19:17:27.62: - found on channel tcp_local
19:17:27.62: mmc_address_to_tree: Parsing address.
19:17:27.62: Address: "[email protected]" 0x00000000
19:17:27.62: Right default: lab.oldD.com
19:17:27.62: Parsing address with null fixup.
19:17:27.62: mmc_address_to_tree: Returning.
19:17:27.62: Rewriting: Mbox = "alas", host = "newD.com", domain = "$*", literal
= "", tag = ""
19:17:27.62: Rewrite: "$*", position 0, hash table -
19:17:27.62: Found: "$E$F$U%[email protected]"
19:17:27.62: Rewrite failed, not forward.
19:17:27.62: Rewrite: "$*", position 1, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "$*", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "alas", host = "newD", domain = "newD.com", litera
l = "", tag = ""
19:17:27.62: Rewrite: "newD.com", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "newD.com", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "alas", host = "newD", domain = ".com", literal =
"", tag = ""
19:17:27.62: Rewrite: "*.com", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: ".com", position 0, hash table -
19:17:27.62: Found: "$U%$H$D@TCP-DAEMON"
19:17:27.62: New mailbox: "alas".
19:17:27.62: New host: "newD.com".
19:17:27.62: New route: "TCP-DAEMON".
19:17:27.62: New channel system: "TCP-DAEMON".
19:17:27.62: Looking up host "TCP-DAEMON".
19:17:27.62: - found on channel tcp_local
19:17:27.62: Mapped return address: [email protected]
19:17:27.62: mmc_rrply: Return detailed status information.
19:17:27.62: mmc_rrply: Returning return address and channel OK
19:17:27.62: mmc_wadr(0x001abd40,'','[email protected]') called.
19:17:27.62: Copy estimate before address addition is 1
19:17:27.62: Parsing address [email protected]
19:17:27.62: mmc_address_to_tree: Parsing address.
19:17:27.62: Address: "[email protected]" 0x00000000
19:17:27.62: Right default: lab.oldD.com
19:17:27.62: Parsing address with local fixup.
19:17:27.62: mmc_address_to_tree: Returning.
19:17:27.62: Rewriting: Mbox = "alas", host = "lab.oldD.com", domain = "$*", l
iteral = "", tag = ""
19:17:27.62: Rewrite: "$*", position 0, hash table -
19:17:27.62: Found: "$E$F$U%[email protected]"
19:17:27.62: Match, pattern = "lab.oldD.com", current = "(*domaincheck*)"
19:17:27.62: old state = not checked.
19:17:27.62: Performing domainMap check on lab.oldD.com.
19:17:27.62: Added domainMap result 1 to cache for lab.oldD.com.
19:17:27.62: new state = succeeded.
19:17:27.62: New mailbox: "alas".
19:17:27.62: New host: "lab.oldD.com".
19:17:27.62: New route: "honey.lab.oldD.com".
19:17:27.62: New channel system: "honey.lab.oldD.com".
19:17:27.62: Looking up host "honey.lab.oldD.com".
19:17:27.62: - found on channel l
19:17:27.62: Routelocal flag set; scanning for % and !
19:17:27.62: Address [email protected] requires local processing.
19:17:27.62: Variant #1 = [email protected]
19:17:27.62: Variant #2 = *@lab.oldD.com
19:17:27.62: Checking for [email protected] in the system alias file
19:17:27.62: - not found
19:17:27.62: Checking for *@lab.oldD.com in the system alias file
19:17:27.62: - not found
19:17:27.62: - adding address [email protected] to headers.
19:17:27.62: Copy estimate after address addition is 1
19:17:27.63: mmc_rrply: Return detailed status information.
19:17:27.63: mmc_rrply: Returning unknown or illegal alias: [email protected]
I wonder why?
Thanks.

Similar Messages

About Version compatibility and Forms Migration

Hello,
Like to know ...
1> whether i can use Forms 10g/Reports 10g with Oracle 9i rel.2
2> will there be any problem with any application.i want to migrate my application in Forms 6i to Forms 10g.My application was running in client-server mode with no web related features. any good doc on migrating from forms 6i to Forms10g.
regards,
Sidhant

Hi there
Firstly read this link:
http://www.irf-dv.de/oracle_produkte/info/f9i_obs.pdf
title: Oracle forms:Features Obsolescence fo Release 9i.
This will give you an idea of potential problem ereas in your application.
Form 10G comes with a migration assistance that can be run in GUI mode or batch mode (command prompt) the executable is called ifplsqlconv90.bat. Your 10G forms help will give you loads of info on both modes.
Oracle have also has an "Oracle forms Upgrade Center", which can be found at:
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html. there are some demos(including for ), config hints etc
All the best
Q

Email workflow showing domain and alias and not the name in the email

I created an email workflow for a specific user field value to receive an email on a trigger event.
However, the email received shows the DOMAIN/Alias and not the "Name" in the email content.
How to correct this error? Not sure where is the issue is.
Sample:
Hello [%Current Item: Reviewer%] is the greeting line.
If Reviewer is say Domain A/v-abcd and Name is Abcd.
The email reads
"Hello Domain A/v-abcd" and not "Hello Abcd"

Hi,
Just select "Display Name" instead of "Login Name" in the "Return field as" field of Lookup dialog.
It should help.
Regards Michael (http://sp2013-blog.com)
Please, don't forget to upvote and mark as an answer if appropriate

Is that possible to do the cross domain migration for AD RMS Services?

Hi guys, recently i am doing a cross domain migration, when i listing out the server, i found the server have AD RMS services which is still active.
but after my migration is complete, it is planned to do the decommission on all the old server
After my checking, i believe the AD RMS have trust establish with a cross site domain already. What i am planning to do is try to do a migration on it.
i have do some research on it an i found "Cross forest Migration of AD RMS document"
what i found in the document, it have mention about
In the event when one cluster running AD RMS is to be discontinued, users may still want to access
previously protected content that was issued a publishing license by that computer. Servers in other clusters can then add the to-be-discontinued server as a trusted publishing domain.
So i was wondering if there is an option for Ad RMS services to select a server or host to discontinued?
The scenario in my head now,
1.Build trust between in my new domain AD RMS with the existing AD RMS. update the certificate between the trusted domain as i mention above with my new domain AD RMS.
but i was wondering if i power down or decommission the server what will happen?
2. the worst case scenario will be decommission the old AD RMS service, and publish the new AD RMS services in new domain, simply build trust with the cross site domain.
any suggestion on this? which case is more workable?
Thanks
Dave

Hi,
I think you may ask in AD RMS forums:
http://social.technet.microsoft.com/Forums/en-US/home?category=rms&filter=alltypes&sort=lastpostdesc
Regards.
Vivian Wang

Question about Domain file size...

I have a dot Mac account, and my iDisk capacity is 1 Gb.
As I regularly back-up my Domain file from my G5 iMac to a FW external drive that sits on my desk, I have just noticed that the file size is now just over 1 Gb.
Can someone please explain to me why I still have almost 700Mb left on my iDisk, yet my Domain file size is over 1 Gb?? Obviously, there must be 'internal' files that aren't copied to the iDisk.
Thanks,
Rachel.

Wow, that's quite a discrepancy. 1gb Domain vs. 300mb site? Well suffice it to say that the Domain file contains all the information that is needed to generate your site. But it makes me curious too why you have such a large discrepancy. Do you have a lot of video on your site?
My site is only about 50-60mb and my Domain is roughly the same size. When I first started using iWeb, I used to poke around inside the Domain file quite a bit more than I do now. You can open up your Domain file by Control-clicking it and selecting "Show Package Contents." At one point early on when I was blithely dragging and dropping stuff into iWeb and publishing just for experimentation, I noticed that even after I deleted images or EVEN WHOLE PAGES, that sometimes the Domain file would still contain images and quicktime movies left over from the deleted pages. I didn't know what was going on and actually tried to delete the "old" items from the Domain file, but I ended up with a non-functional Domain file...lots of error messages saying it was missing this and that. So I started over completely with a new Domain file. I also noticed at the time that my Domain file was several megabytes larger than my site.
Since then, I have been very careful only to drag items to iWeb that will actually be used. The Domain-to-site size ratio has stayed pretty much 1:1. So I chalked up my earlier experience as a fluke. I don't know. Maybe there is an inconsistency somewhere. In fact, do a search here on "Domain file optimizing" or "Domain file bloat" and you may be able to find my questions about the issue. I never did get any responses, though.

Weblogic 10.0mp1 domain migration over windows to weblogic12c

Need to know the migration steps while migrating the weblogic domain 10.0 mp1 hosted over windows server 2008 to another windows machine and the weblogic should be 12.2 .
The admin server is running with 3 managed server in prodcution.Can anyone suggest the possible ways?Can i use the domain migration utility GUI as provided over 12C ?

Hello.
The "server restart needed" is handle by wlst like this: http://edocs.bea.com/wls/docs100/config_scripting/config_WLS.html#wp1029452
Furthermore: http://download-llnw.oracle.com/docs/cd/E13222_01/wls/docs92/config_scripting/reference.html#wp1153965 but I still don"t know if a MBean is modified with this attribute, anyway, it could suffice for you script I think.
Regards.
Aurélien.
Edited by: Aurelien DEHAY on 30 juil. 2009 09:25

Domain Migration :from single domain to multiple domain.

Hi ,
We have an urgent requirement for the domain migration
The scenario is currently we are using MS AD as LDAP server to store portal users and thier credentials.
Lets say we have current domain name as : ad.abc.com
we are planning to migrate from this domain to number of domains.our requirement is to move the portal users into thier specific domain in batches.eg out of 5 users 2 has been moved to new domain and other 3 are still in ad.abc.com.
But after domain migration ,all the 5 users <b>should</b> be able to access all the applications and functionality of portals.
What should we do to achieve the same?
How portal applications will be affected by this?Can all the users access all applications without fail?
What exactly the LDAP does in portals?
Any help will be greatly appreciated
Thanks in Advance
Amit

Hi,
Yes, you need to prepare Active Directory and domains.
What's more, you need to upgrade existing Exchange 2007 servers to Exchange 2007 Service Pack 2 at least.
Here is an article for your reference.
Exchange 2007 - Planning Roadmap for Upgrade and Coexistence
http://technet.microsoft.com/en-us/library/dd638158(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Domain migration: From single domain to Multiple

Hi ,
We have an urgent requirement for the domain migration
The scenario is currently we are using MS AD as LDAP server to store portal users and thier credentials.
Lets say we have current domain name as : ad.abc.com
we are planning to migrate from this domain to number of domains.our requirement is to move the portal users into thier specific domain in batches.eg out of 5 users 2 has been moved to new domain and other 3 are still in ad.abc.com.
But after domain migration ,all the 5 users should be able to access all the applications and functionality of portals.
What should we do to achieve the same?
How portal applications will be affected by this?Can all the users access all applications without fail?
What exactly the LDAP does in portals?
Any help will be greatly appreciated
Thanks in Advance
Amit

Hi,
Yes, you need to prepare Active Directory and domains.
What's more, you need to upgrade existing Exchange 2007 servers to Exchange 2007 Service Pack 2 at least.
Here is an article for your reference.
Exchange 2007 - Planning Roadmap for Upgrade and Coexistence
http://technet.microsoft.com/en-us/library/dd638158(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Post domain migration Outlook needs Flush dns intermittently

We have office in two cities X & Y, Y city is HO. Our entire DNS Server, Exchange server is in Z i.e. Head Quarters. Y city has file server, DC, Firewall. X & Y are connected via VPN tunnel. After our domain migration from abc.com to xyz.com only
X city few laptop users on wi-fi started getting issue of 'Outlook freeze- connection store/restore error' emails are stuck in outbox and not received. Only when we do ipconfig/release, renew, flushdns...it resolves the issue temporarily.
We found that issue might be on Wi-fi (Cisco SOHO - 3) we have changed the DNS setting of the WI-fi, pushed the DNS in host file, pushed in laptop settings, reduced the voltage of the wi-fi. Restarted the servers in Y city. Not sure if it is DNS or Wi-FI
issue. Still the problem persists. Please advice.

there is no easy way to find out the issue if it is related to client side configuration. as you already mentioned that it works after making DNS changes so the issue is somewhere at the Wi-Fi. it also depends how big is the mailbox, and if the outlook is
setup to cache mode or not.
For further troubleshooting I will use that same laptop on the wired network.
also if that Wi-Fi has Ethernet port I will connect a Hub/switch to it and then connect the laptop to the Ethernet. This is tell me if the issue with Wi-Fi on the laptop or the Wi-Fi Access Point.
Plus this thread should be moved to Outlook Forum
Where Technology Meets Talent

Active Directory Cross Forest Domain Migration

Dear All,
We are in the process to rebuild new Active Directory infrastructure. Multiple single forest domains in organization which needs to be consolidated/migrated on single Active Directory Domain. For this consolidation, have some queries to be addressed before
going to start consolidation.
What is the best practices and what tool should we use for domain migration/consolidation
Active directory is on Windows 2003, forest and domain level is on Windows 2003, this will support to Windows 2012 R2 forest and domain functional level, will be migrated
directly from windows 2003 to windows 2012?
When move users to new domain, how will they access the other resources on the network. For e.g. Printer, File server, local web base application
After moving some computers to new domain would be possible to access remaining computers on old domain?
How the file server data will be moved? Best practices with NTFS folder permissions and users rights?
Is there any policy to register network printers on new Active Directory domain?
How users would be access web base application on new domain as their FQDN would be define with old domain name? Any option to change old domain FQDN with new domain that would be describe with any URL link?
Kindly give your valuable input to meet the desire result.
Thanks in Advance.

Dear Lucky,
Ya you can Migrate contents from multiple forest domain. Using ADMT (Active Directory Migration Tool)is the best way to migrate AD content. But you can't migrate from Windows Server 2003 to Windows Server 2012 R2, cause in Windwos Server 2012 R2 don't
have the supportebility of Windows Sever 2003.And not only users you can also migrate all others info (i.e. Computer object info, groups info, Exchange mailbox info, security info).You can migrate users face by face, means which peoples are in old domain they
can access old domain and new users are in new domain.For more info please follow the given link:
http://technet.microsoft.com/en-us/library/cc974332(v=WS.10).aspx
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

Help with domain migration of a HyperV ( csv ) CLUSTER on Windows 2008R2

Hello everyone ,
In our environment we have 3 physical machines running Windows 2008 R2, under the " domain.local ";
Server1 -> Primary Domain Controller
Server2 -> Node 1 of cluster Hyper V
Server 3 -> Node 2 Cluster Hyper V
Server 2 and Server 3 share CSV storage mode , and contain multiple virtual machines
We need to migrate all machines to a new domain , but I'm very lost on how to do and not lose the cluster. Can anyone help me and tell me please the steps to migrate this environment from the old domain to the new domain ?
do i have mount a parallel cluster in the new domain and then, migrate one by one all the virtual machines?
Thank you very much , any help is welcome

Hi Sir,
If you have only 3 physical machines and can not re-build the hyper-v cluster into new domain, I would suggest you to maintain two domain one for hyper-v cluster one for the new domain (as for new domain , you can create a VM in hyper-v cluster and
promote it to be a new DC ).
If you have more physical machines you can try to create a new domain and cluster then move these VMs into the new cluster to achieve migration .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Hey iphone an iphone 3g and i only have about 13 apps and the yellow bar on itunes for my phone is way to big i deleted all my photos all my music every thing i ryed restoring ans all it still takes up space for sum reason ?? please someone help me

hey iphone an iphone 3g and i only have about 13 apps and the yellow bar on itunes for my phone is way to big i deleted all my photos all my music every thing i ryed restoring ans all it still takes up space for sum reason ?? please someone help me

If Other (the yellow bar) is too big something is corrupted. The only solution (that I know of) is to restore from your most recent backup using iTunes (see http://support.apple.com/kb/ht1766).

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the syst

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the system off, for a period of time, and then turning it back on, when I click on Aperture, it comes up and locks in the thumbnail mode. I can view my stored pictures, even modify them, but it still says thumbnails.
I got in this mode by trying to import "one jpeg photo", from a scanned slide using a Nikon Scan4 IS5000ED scanner. I had saved the scan to my desktop before I tried to import it.
Please Help, Maurice A Bird at [email protected]
Thanks

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

I want to set-up a network with our current two laptops for a family of 4 w/unique 4 profiles. I'd like everyone to be agnostic about which computer to log into and use but still have private docs and apps (i.e.mail/facebook). How best can I do this?

I want to set-up a network with our current two laptops for a family of 4 with unique 4 profiles. I'd like everyone to be agnostic about which computer to log into and use but still have private docs and apps (i.e. mail/facebook). How best can I do this?

iCloud Photo Sharing FAQ - Apple Support
http://www.fatcatsoftware.com/iplm/Help/accessing%20an%20iphoto%20library%20on%2 0another%20mac.html

HT201250 My backup external hard drive hasn't work since I insalled Snow Leopard. Bad:( I am still learning about my MAC and would just like to re-format the hard dive and set everything up again. I want to upgrade to Lion but can't untill I backup what

My backup external hard drive hasn't work since I insalled Snow Leopard. Bad:( I am still learning about my MAC and would just like to re-format the hard dive and set everything up again. I want to upgrade to Lion but can't untill I backup what I.

Read through the links here, calm down and take your time.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Still about domain alias and domain migration

Similar Messages

Maybe you are looking for