STM-1 configuration
what does KLM means?...does PA-MC-STM-1SMI card has KLM configuration?...actually i have 7606 router and it has PA-MC-STM-1SMIand i have configured this STM-1 on E1 unframed , and had given loopback network for testing.now the engineer at the far end has nortel equipment and he is telling that he is not getting loop on klm 1 1 2. now what does that mean?about which interface on my router is he talking abt?...i am confused...plzz help me out
Hi
The KLM values are related to Transmission equipments and no way related to your router configs.
you will be extending the STM1 from the transmission equipment to your 7600 router.
so the points in the transmission equipment from where ur sourcing the link mostly refered as the KLM values or KLM points..
you can very well cross check or verify the same with the SP whos providing the link to u or to the tranmission person whos invovled out there basically we call it as (ITMC or NLD team)here ..
regds
Similar Messages
-
STMS Route configuration in Three system Landscape with DEV,QA and PRD
Hi
We have Three system landscape.i.e DEV,Quality and PRD
Before Somebody configured the STMS by selecting standard two system land scape ( Dev and QAS)
We Have Installed Production Server And Added into Existing STMS Configuration
Now Three Systems Showing, In Import Overviw Screen
How Can I Create Route Between Three systems
What I am Asking Is Without Delet Old Roots
Can i Create it are Not
regards
NSNRefer these links:
http://help.sap.com/saphelp_erp2005/helpdata/en/1c/2ddc0901db11d284870000e8a57770/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
Regards,
Ravi -
STMS Configuration - Change Virtual System with Real System
Dear all,
My system, if I go in the transaction STMS in DEV system, was configureted in the following way:
DEV => QA => PROD (Virtual System)
Now, I want to change the PROD Virtual System in PROD Real System.
How Can procede?
Can you explain step-by-step the process?
Because the system was configureted from other people, and I'm new to using the STMS.
Thanks in advanced for your help.
Best Regards,
GiulioHi,
After the planned system is physically installed it is time to replace the Virtual System with the realized system.
The procedure for the same is as under:
1) Delete the Virtual System from the transport domain
. Login into Transport Domain system client 000
· Using STMS got to Overview=> Systems
· Chose SAP Virtual System=> Delete (confirm)
· Distribute configuration change.
As soon as the configuration change is distributed, the virtual system is deleted. The import queue for this system in TMS disappears but it is available as import buffer at the operating systems level.
Now add the new (physical system) to the transport domain:
If STMS is configured as standalone system then first delete STMS configuration on PRD system
login into PRD system client 000. (delete STMS configuration if present.)
run stms -> it's ask for set up STMS -> click on other configurition (F6)
Target Host -> host name of domain controller ( host name of transport domain system)
System number -> Instance number of domain controller ( instance number of transport domain system)
Now,
Go to the Transport Domain Controller and accept the system. (As the import buffer is available at the operating system level, no change requests will be lost)
Distribute the configuration changes.
regards,
kaushal -
TMS Configuration Needed Pls Help
Hi,
I have configured already a three system configuration in TMS.
Dev>qua>pro.
Now I want to include a Preproduction System in between qua and Pro.
How to configure as i have already configured as 3 system configuration..
Regards,
Saravanan.Saravanan,
(Preprod system ) --> STMS -- Other Configuration -- Enter Domain Controller server name for Target Host.
Give the system number.
Now , Enter in to Domain Controller --- STMS --- System Overview -- Click on waiting to be included --- Hit activate icon (approve)
Then you will see a system screen successfully added..
Double click on newly system added and in the screen enter Transport screen group "Name" and hit save.
Hope this will help you.
Thanks
Kalyan -
Difficulty configuring transport for 7.0.3 trial
I realize that there have been posts on this issue before, but I spent several hours yesterday searching the boards and never arrived at a complete solution.
I have installed the Netweaver 7.03 SP04 trial.
I have logged in as DDIC user and have executed the post-installation actions on SE06.
When I go to set up transport, however, I keep getting the error "TMS must be configured for 000". All the documentation I have found seems to suggest that I should get a popup window on first connect to STMS to configure the transport domain - this popup is never shown. I have tried Extras -> Delete TMS Configuration, but receive the error "TMS not configured for system NSP".
From reading some previous posts, I have confirmed that there is a "sapmnt" share available, and added the SYSTEM user with full permission roles to the share. This did not seem to have any effect - I still receive both errors as described above.
What are the next steps I should pursue to get the transport working?
Thanks for your help!Hi Manu,
I foolishly was not logged into 000.
I've now done the following:
I've logged into 000 as DDIC
I ran txn SE06 successfully.
I ran txn STMS and received the popup. After entering the values I received the error "Errors during distribution of tp configuration."
I went to txn SECSTORE, highlighted the two erroring values and then deleted them.
I returned to txn STMS and selected extra -> Delete TMS Configuration.
I saved and then reentered the password. My STMS is now reporting that it's the domain controller.
Thank you for your help! -
Question about transport system configure
I have two system dev & prd, the prd is domain controller, the router is from dev to prd.
I want to delete all transport configure and reconfigure it. Now I login to prd 000, and delete dev from transport system, and use se06 to initial the stms, then I go to stms, the configure has been initialized.
But when I login dev000, the two systems configuration and the transport router is still exist in stms and I can not use se06 to inital it. I am sure that in prd 000, the configuration has been deleted succussfully.
the configuration is still exists in dev000, and I can not do any operation from dev000 which is not domain controller, and the real control prd000 has been delete by me.
I try to use se06 , but after reinstall cts, I can still see the configuration in stms.
Could you give some solutions , Is there any problem with my operation?
thanks a lot.
Edited by: victor on Jan 11, 2009 9:17 AM
Edited by: victor on Jan 11, 2009 11:07 AMHello Victor,
you said PRD is the domain controller and successfully you
deleted previous configuration in PRD ,now login into DEV and
in the same delete the cofiguration in DEV too.when everything
is cleared you start from the first and start adding DEV to the
domain PRD.hope this helps.
regards,
Manjula. -
Adding one more system in existing stms landscape
Hi Gurus,
I am trying to add one sandbox system to my present landscape
configure TMS for four systems, out of which two systems (DEV1 and DEV2) are with same SID (DEV). As recommended by SAP, I understand that there can not be two systems with same SID in a transport domain.
and also my domain controller is DEV system,
please suggest how can i add DEV sand box in this landscape
RegardsHi,
Yes, you can do that. Once cofiles and data files are generated after transport request is released in Quality system, you can import them into Sandbox system by manually adding them into import buffer.
If Sandbox system does not have common /usr/sap/trans, you have to manually copy those cofiles and data files from Quality to Sandbox /usr/sap/trans/cofiles and .../data and add the request to import buffer of Sandbox system from either STMS or OS level using tp addtobuffer command.
Please make sure STMS is configured in Sandbox system as local domain before you perform above said steps.
Hope it helps. Please let me know if you need any further info.
Thanks,
Siva Kumar
Edited by: Siva Kumar Arivinti on Nov 5, 2011 1:55 PM -
Error in BI Content 7.03 Import
Hi, i have installed BW 7.0 in unix machine.
I am getting the follwoing error during BI content 7.03 import.
Pls let me know whether , i have to import BI-content 7.01 before or i can import BI 7.03 directly
I am facing error in XTA_put execution
<b>
The installation was stopped, since an error occurred during the phase
XPRA_EXECUTION, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0012
- Error message: OCS Package SAPKIBIII1, tp step R, return code
0012
Notes on phase XPRA_EXECUTION
The XPRAs and after-import methods are executed in this phase. This
phase can terminate due to the following reasons:
o TP_INTERFACE_FAILURE: The system was unable to call the tp
interface.
o TP_FAILURE: The system was unable to execute the tp program. For
more information, see the SLOG or ALOG log file.
o TP_STEP_FAILURE: The system was unable to perform the XPRA_EXECUTION
tp step. To see the cause of the error in the method execution log,
choose Goto -> Log -> Queue.
o CANNOT_READ_BUFFER: The tp program was unable to open the relevant
buffer file. For more information, see the SLOG log file.
o CANNOT_MODIFY_BUFFER: The tp program was unable to modify the
relevant buffer file. For more information, see the SLOG log file.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.</b>
Message was edited by:
Balaji RHi Balaji,
Seems like the problem is that you haven't configure the TMS "The Add-On Installation Tool requires that the Change and Transport System (CTS) be configured correctly"
Logon to client 000 and go to transaction STMS, then configure the transport domain and save also check that you have a logical system assigned to your BI client.. you can check on SCC4 and if necesary create and assign the logical system using transaction SALE..
Once this is done try it again.
" have to import BI-content 7.01 before or i can import BI 7.03 directly"
Each patch have a prerequisites listed in either the note attached to the patch or before the import in SPAM/SAINT..
Regards
Juan
Please reward with points if helpful -
Error in phase: ADD_TO_BUFFER in SPAM during import of SAPKB70017 and 18
Hello
What is problem in this case? During import of SAPKB70017 and SAPKB70018 I get following error(there is no SLOG file in /usr/sap/trans/log):
The import was stopped, since an error occurred during the phase
ADD_TO_BUFFER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: ADD_TO_BUFFER
- Reason for error:
- Return code: 0211
- Error message:
Notes on phase ADD_TO_BUFFER
In this phase the queue is placed in the transport buffer of your
system. This phases can terminate due to the following reasons:
o TP_INTERFACE_FAILURE: The tp interface could not be called. There is
an RFC error.
o CANNOT_ADD_PATCH_TO_BUFFER: A Support Package could not be included
in the transport buffer. The program tp is trying to open a file in
the file system. For more information, refer to the SLOG log file in
the directory /usr/sap/trans/log.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.Hi Jan,
First, check whether your STMS is configured properly. Next check the transport directory and the transport tool from within STMS (system -> check in menu options).
If these 2 are ok, then you might check from within the OS layer by manually adding to buffer (tp add to buffer <Request No> <SID>).
Also, I am assuming you are doing this from client 000 with a non-standard user having proper authorizations.
I believe this to be an issue of permissions at the OS layer.
Regards
Siva -
Could not start transport control program tp while releasing the TR
Hello experts,
i have a problem if any one phase this kind of problem & if u know the solution please share to me its urgent
problem in Development system ,for this i had updated kernel , TP patch level , R3trans patch level in development and quality system , but still the problem is occurring in development system . while releasing the Transport Request this error is coming that too not in frequently some times it is happening some times it not happening ( some times its working fine )
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An
error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway
Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then
execute the command again.
please suggest me what can i do for better , how can i resolve this issue
Thanks & Regards,
NarasimhaHello experts ,
Last one and half month on-words we are phasing some problems on STMS
while releasing the Transport Request getting this error messages on
status-bar
1. "could not start transport control program tp"
2. while importing the TR into quality system getting this error message" RFC Error :timeout during allocate/CPIC-CALL "
3.while forwarding the TR from QAS to PRD : " RFC Error :timeout during
allocate/CPIC-CALL "
after continues refreshing,we are able to release the request and importthe request into quality system. But after some time again same problem
coming
for this we did the kernel upgrade , tp , & R3trans update and STMS RE-
Configuration etc...But no use with this we got the same problem after
finishing all these workaround , but don't know what happened after 2-3
days STMS starts working fine DEV-QAS-PRD ,
Now we are in the same problem after continues refreshing,we are able torelease the request and import the request into quality system. But after
some time again same problem coming
please suggest us what could be the reason behind this & what we can do
for better -
Production and Development in Different Networks.
Hi Experts,
I have installed SAP ECC 6.0 DEV with EHP5 and Solution Manager in one Network Landscape i.e under one live ip. PRD is not yet installed. My SAP Router is running on Solution manager. Now i have a situation here. The client now wants " only the PRD server installed and shifted to a datacenter" where he will buy a new live ip with a specifed bandwidth. Now my query is if this is the case how do i connect DEV and PRD servers which will be geographically apart. And how do i configure SAP OSS connection to PRD as my router is in defferent landscape. How will the stms be configured for the developments and customizations to move to PRD. Please let me know what kind of Network activity I have to take care of.
P.S
Any information on installation of servers on VMware please let me as we are considering evern that as an option.
Regards,Rahul
I am not sure what you mean Geographically apart
If you mean they are in different domain there is an option to create domain link
STMS --> Overview --> System --> System --> Create --> Domain Link
If they are not connected by network i am not sure if you can do much
Cheers !
Manish -
SAPXPG_DBDEST_DBTAP error
Hi,
while runnning any job from db13 getting error:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000009, user ID TTLBASIS)
Execute logical command BRCONNECT On host dbTAP
Parameters: -u / -jid STATS20110721201943 -c -f stats -t ALL
SXPG_STEP_XPG_START: is_local_host: rc = 403
SXPG_STEP_XPG_START: host = dbTAP
SXPG_STEP_XPG_START: is_local_r3_host: rc = 802
SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN: rc = 1003
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
SXPG_COMMAND_EXECUTE(LONG)
<timestamp> = 20110721202044
COMMANDNAME = BRCONNECT
ADDITIONAL_PARAMETERS = -u / -jid STATS20110721201943 -c -f stats -t ALL
LONG_PARAMS
OPERATINGSYSTEM = ANYOS
TARGETSYSTEM = dbTAP
DESTINATION
SY-SUBRC = 1003
SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error: For More Information, See SYS
Job cancelled after system exception ERROR_MESSAGE
Also tcp/ip connection vis Sm59 for job" SAPXPG_DBDEST_DBTAP" shows below message:
Connection Error
Error when opening an RFC connection
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host tasltapci / sapgw01
DETAIL: no connect of TP sapxpg from host dbTAP after 20 sec
COMPONENT: SAP-Gateway
COUNTER: 986
MODULE: gwr3cpic.c
LINE: 2066
RETURN CODE: 242
SUBRC: 0
RELEASE: 701
TIME: Fri Jul 22 11:28:25 2011
VERSION: 2
Also i have made entry in .rhosts fine in CI and DB but error still comming. pls suggest.
Iam using ecc6.0 with oracle+hp-ux
Edited by: Tarun verma on Jul 22, 2011 8:22 AMHi Varma
Is STMS is configured in u r system?
is this system is new system?
if it so have u done the post steps (st06 ..etc)
And also check the RFC connection too.
Regards
Gunreddy
Edited by: vgunreddy on Jul 26, 2011 1:25 PM
Edited by: vgunreddy on Jul 27, 2011 8:11 AM -
In ECC 6.0, can I link a CTS project id to a transport target group?
In ECC 6.0, can I link a CTS project id to a specific transport target group?
I configured two IMG projects, namely, Phase1 and Phase2. In SPRO, I tied them to CTS project ids, DEV_P00001 and DEV_P00002, respectively. In STMS, I configured two transport target groups called /PHASE1/ and /PHASE2/ that I want to link with the corresponding project ids. The intention is that Phase1 transports will go to the clients specified in the /PHASE1/ target group and that Phase2 transports will go to the clients specified in the /PHASE2/ target group
I want to link the CTS project ids to the respective transport target groups so that (e.g.) if a team member creates a transport in SE01/SE09/SE10 and chooses the DEV_P00001 project id from the Project dropdown, then /PHASE1/ will appear as the default transport target. Likewise, if the team member instead chooses the CTS project id DEV_P00002, then /PHASE2/ will appear as the default transport target.
Right now, the user has to remember to choose the correct combination of CTS project id/transport target group.
Solution Manager is NOT involved in this scenario.
Does anyone know of a way to do this in ECC 6.0?Hi,
Try this it worked for me though,
1. Goto SPRO_ADMIN
2. Select the Project
3. Choose Change
4. Go To Transport Requests TAB
5. Activate CTS Functionality
6. Save it after the Pop Up
7. Go to Se10 and check if the Project Field is getting Populated with the Desired Project or not.
Regards,
Nitin -
Dev and Qty import queue is empty
Hi All,
We are having three system landscape Dev, Qty and Prd. In STMS we configured PRD as a virtual system. We have released some requests in Dev 15 days back & we are not imported and we are able see the requests in STMS_IMPORT of Qty. But suddenly when we are checking now there are no requests in QTY stms_import and DEV stms_import as well.
We have checked all the checks STMS and we manually checked wether trans directory of Domain controller also accessing from QTY.
Please suggest on the issue.
Thanks & Regards,
SreekanthHi All,
I have reconfigured STMS. Still when i am adding released request with tp command to the buffer of QTY its not showing in import queue. While when i added to the DEV buffer the request is showing in queue but not to QTY.
When i checked consistency check for DEV it showing 4KB of datafile and 1KB of cofile, but when checked for QTY it showing 0 KB for data and cofile. But all folders in trans of domain controller are accessible from QTY, even all checks are showing the same trans directory of domain controller.
Please suggest.
Best Regards,
Sreekanth -
Need help for DB backup through OEM 11g grid
I need to know how to schedule the hot backup of whole DB using OEM 11g grid.
In our system there is a backup running for DB (10gr2). It is not scheduled through jobs.
I am not able to find this scheduled db backup information from OEM.
Can anyone guide me how to check the current backup schedules and backup script ?
Is there any good document for this ?Hi Dhaval,
You may look out option for restore backup from production and restore the same on QAS.
Refer SAP note
683447
SAP Tools for MS SQL Server
Which shall help you with post restore steps on the database.
Once DB and SAP is up you may perform generic post restore steps like
- STMS re-configuration
- Adjusting profiles
- Executing BDLS
- Importing RFCs and user master ( if exported before the restore)
- Adjusting Partner profiles
- Configuring backup
- Apply SAP license
Above are just a few of them to name. There could be many more as per customer landscape.
Regards,
Deepak Kori
Maybe you are looking for
-
Fed up - BT termination charges.
Singed up with BT last April. had an absolute nightmare which I won't bother going into, other than to say after several months, god knows how many phone calls, promises of call backs not materialising and being asked repeatedly to unscrew my plug so
-
I tried to download the new update to OS10, but the software update feature stalled. So I made it force quite. Then, next time I turned on the machine, it would not get to the Mac OS - screen turned grey and told me to turn off the machine and restar
-
Problem with database schema objects in the entity object wizard
Hi All, When creating a new entity object, I am facing a problem with database schema objects in the entity object wizard, database schema objects (check boxes for tables,synonyms...) are disabled. Actually I am using a synonym but I am not able to s
-
Noise Analysis - 1overf and id variables (Active Devices)
The Noise Analysis option provides an output variable "xxN_1overf" (xxN is the device name, like qq1) for active devices (diodes, transistors). In a circuit I am simulating the 1overf variable is the dominant noise source, but I don't understand/kno
-
Auto email to vendor after GRN
Hi All, Our client requirement is to have an email to be generated after every GRN and send to vendor automatically. Let me know is there any standerd process available or we need to go for development. Regards, RB