Stop all Oracle Services

I am upgrading/patching my test 10g database. While upgrading it ask you stop all oracle services in order to continue the upgrade. I did that but it is still asking to stop all oracle services. Now what do I do, anybody have experience with that.

First, make sure you don't have any thing automatically started, and don't use even sqlplus, as a client it will load several dll's and when the upgrade process starts it will mark several dll's as being used.
I've been working with win2003 several upgrade processes, I don't know exactly why, but several dll's are still marked as being used, even if the host was restarted with the service set to manual start. The exact list of dlls that are in this situation correspond to those used by an oracle client.
The workaround I found for my specific case was to rename the dll's and let OUI to write the new version.

Similar Messages

  • How to Close all Oracle services on Win XP?

    While I was trying to install Dev/2k on Win XP, I got a message to close all Oracle services before I proceed with the installation. In Windows NT, I simply open Services folder from the control panel and shut down the desired srvice, but there is no such a thing on Win XP...
    Any input would be helpful.
    Thank you much in advance.

    Go to Control Panel --> Administrative Tools --> Services and find all the service names starting with Oracle and right click to manually stop each one.

  • Stop all Ciscoworks Services

    Is there a way to stop all Ciscoworks services using one command, then restarting themagain with this command?
    To prevent database corruption when rebooting.

    Hi!
    You can use the following command...
    Windows:
    net stop crmdmgtd
    net start crmdmgtd
    Solaris:
    /etc/init.d/dmgtd stop
    /etc/init.d/dmgtd start
    Takes just a while.

  • Start/Stop remote oracle service

    Is there anyway I could start/stop a remote oracle service? Please provide source code. Thanks!

    HI,
    Suppose ur Database resides on X machine
    and u want to do remote login from y or z ,
    follow the conditions and steps below
    1) You need to install servermanager utility in ur remote machine
    2)then u need to run orapwd.exe utility on ur remote machine with following command
    "orapwd file=<full path name where u want to keep ur password file > password=<password> entries=<no of DBAs u want that password file to be accessed by>"
    after this u need to change Parameter in initialisation file , u will find one entry called "REMOTE_LOGIN_PASSWORDFILE=NONE" u have to change it to " REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE" u can also control multiple dabases from this same password file for that u will have to change above entry to REMOTE_LOGIN_PASSWORDFILE=SHARED,after this
    u need to pass following command "ALTER USER SYS IDENTIFIED BY <PASSWORD U LIKE > "
    this will change the password of both INTERNAL and SYS, now if u want to give multiple user access to this file then simply u grant two roles to them "ALTER SYSTEM GRANT SYSOPER,SYSDBA TO <USERNAME>" (INTERNAL AND SYS have these roles by default) this will add that user to that file now that user can also go to servermanager.Now u can Connect with any of the user which u have added in passwordfile in ur machine, and can remotely start or stop database with following Commands "STARTUP" "SHUTDOWN" respectively
    *Note -
    1)Location of password file is OS specific
    2)if ur using windows then u need to remove one entry in registry "DBA_AUTHORISATION =''
    Have Fun

  • How to stop oracle services using Net8

    Hi
    each time I try to install oracle report 6i in myy machine (of course in the same developer home on which form installed ).
    a message with title Stop oracle application
    saying the following
    you must stop all  oracle services and application using Net8 for the Net8
    installation to be successfull
    press ok to continue the installation once the services and applications
    have been stopped or press ok to abort this installation.
    can any one help me?
    oracle database 10g
    windows xp
    developer 6i

    You can stop any service either
    a) using the services applet in the control panel window
    b) start a cmd box and issue
    net stop <servicename>
    Hth
    Sybrand Bakker
    Senior Oracle DBA

  • Oracle Services still running preventing install - Urgent please help!!!

    I'm trying to install Oracle reports on Windows XP and keep getting message:
    "You must stop all Oracle services and applications using Net8 for the Net8
    installation to be successfull" It thinks sql*net is running but as far as I know
    it's not. How do I fix this problem?
    Mark
    Message was edited by:
    mwats
    Message was edited by:
    mwats

    ok, what are the service names for sql*net and net8 client?
    del srv (delete server) software is there.
    it is free at internet.
    install that software and run thru command prompt
    like:
    in command prompt
    go to delsrv folder in command prompt and give
    command like
    delsrv <service name>
    then that service will be deleted from services.

  • How to stop Oracle services?

    I'm new to Oracle. I have installed Oracle 10g and I'm trying to apply patch 10.2.0.5. I'm getting the error that ORASLAX10.DLL is being used by another process. I have found out that SNMP is using that dll. I have restarted SNMP but it will use the dll right away.
    This is exactly what I have done before I start installing the patch:
    Installed Oracle 10g 10.2.0.4
    Restarted the server
    I think that I probably need to shutdown Oracle services and/or database. I have checked the Services in Administrative Tools and I don't see any services with name starting with Oracle. I have ran lsnrctl status and there is no listener. What other commands should I run to check/stop any Oracles services/database?

    Thanks for all the helps.
    Even though the Universal Installer windows was not responding at 100%, the patch installation seems to be completed successfully according to the log file.
    Where can I find a list of non-Oracle services used by Oracle? I still have not figured out which product of Oracle I installed is using the SNMP service.
    Edited by: 881656 on Sep 3, 2011 5:16 PM

  • Start/stop Grid Control services

    What are the service associated with Grid Control and what are the commands to start/stop them?

    Hi
    To start the grid control you need to start the agent
    and the web components in the oms home along with the agent.
    # Start ALL
    /oracle/product/10.1.0/oms/bin/emctl start agent
    /oracle/product/10.1.0/oms/opmn/bin/opmnctl startall
    /oracle/product/10.1.0/agent/bin/emctl start agent
    # Stop ALL
    /oracle/product/10.1.0/agent/bin/emctl stop agent
    /oracle/product/10.1.0/oms/opmn/bin/opmnctl stopall
    /oracle/product/10.1.0/oms/bin/emctl stop agent
    With best regards
    Shan

  • The email I've been using for years has terminated all its services.  I was using it for my icloud id.  Now my ipad keeps popping up asking for its password.  How do I delete this icloud id and change to a new one?

    The email which I used for my icloud id has stopped all its services.  I cannot gain access to this email anymore.  I am able to change my Apple ID but unable to change iCloud ID. My ipad 2 keeps popping up asking for the icloud password.  Can anyone help me on this issue?  Thanks...

    Hello, luciawong. 
    Thank you for visiting Apple Support Communities. 
    You may find this article helpful with the issue you are experiencing.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    Regards,
    Jason H.

  • Win2k cannot start oracle services

    Hi,
    Usually, our oracle servers can start up autometically
    when the machine start up.
    Just now, oracle services cannot start. I try use
    start->control panel->administrator tool-> services to
    start oracle service, it gets errors as following:
    could not start the OracleOraHome90TNSListener service on
    local computer.
    Error 5: Access is denied.
    Then I try to use "lsnrctl start listener"
    I got following errors:
    Failed to start service, error 5.
    TNS-12536: TNS:operation would block
    TNS-12560: TNS:protocol adapter error
    TNS-00506: Operation would block
    32-bit Windows Error: 997: Unknown error
    I check listener log file, no new message is add to it.
    My OS is window 2000 professional.
    Oracle server version: 9.0.1.1.1
    Thank you for some advice.
    Julie

    Hi,
    I try to fix it by change log on setting by
    setting the oracle service as 'this account' and
    fill in account and password with system administrator
    account information. Then all oracle services can work
    properly. But with this setting the web application which
    connect oracle database cannot login to database.
    It may be the registry database of the machine get
    corrupted.
    How can I delete all oracle services and recreate the
    them again, then will re-register the service information?
    By the way, all other services in system are log on as
    localsystem account, only oracle services does not allow
    me set up as localsystem account, if I did that way, oracle service will not start and complain "error 5:
    access is denied"
    Thank you for give me some guide lines.
    Julie

  • Stop all processes

    Hi
    10.2.0.1.0 / AIX
    Upgrate to 10.2.0.3.0
    How to stop all Oracle processes?
    -Shut down the db
    -isql
    -db console
    There are still warnings about running processes that interfere with the OUI.
    What else and how to stop?
    Should I kill manually one by one all listed processes?
    Thx,

    did you stop the listener?
    close SQL*Plus?
    When all else fails going to the operating system in a terminal window and running the AIX equivalent to:
    ps -ef | grep orashould point you in the right direction

  • Unable to install patchset 10.2.0.3 on XP - wants me to stop ALL services

    Hi,
    I am unable to install patchset 10.2.0.3 on our existing OWB installations (patchset 10.2.0.2) already installed.
    I get an error message saying that certain files are in use and that I should stop the "following services". It then proceeds to list every running service!!
    I have tried installing OWB with the 10.2.0.2 patchset and then I am able to install the 10.2.0.3 one but that is not a viable solution as I already have several users with OWB 10.2.0.2 installed on their machines and they need to patched to 10.2.0.3 ASAP. I really don't want to have to uninstall OWB from their machines and reinstall it.
    So, what's going on? Why does the OUI say it wants every Windows service to be stopped?

    I think this problem is caused by one or several MS Windows services (maybe MSDTC?). OUI cannot identify exact service name which locks Oracle file(s) and show all services in list.
    There are several notes on Metalink about this problem:
    Note:356181.1 "Errors about files being in use, when applying a patch."
    Note:402546.1 "How To Specify Which OCI.DLL The MS DTC PROCESS Uses"
    Note:198699.1 "Access denied on OCIW32.DLL when removing 9iAS Release 1 (1.0.2) installation"
    Note:232827.1 "Universal Installer can not replace the oci.dll Error when install/deinstall Oracle Products"
    Note:294350.1 "Write Errors, or Files In Use, or NoServicesForProcessException During Patch Installation"
    Try to change registry value HKLM/SOFTWARE/Microsoft/MSDTC/MTxOCI/OracleOciLib to nonexistent file name (for example xxx.dll), restart Windows and try to install patch again. Please give a feedback to this recommendation, I think it would be interesting to all.
    Regards,
    Oleg
    Message was edited by:
    oleg

  • Reg: Oracle service is stopping when i am running a query

    Hi...
    I wrote a query with a cast function and a simple inner join on user defined tables,
    and when i am executing the query i am getting the error message ORA-12500.
    when i checked in the services ,my oracle service got stopped.
    Can anyone tell me why this is happening???
    Version : Oracle 10g
    Message was edited by:
    user642904

    12500, 00000, "TNS:listener failed to start a dedicated server process"
    // *Cause:  The process of starting up a dedicated server process failed.
    // The executable could not be found or the environment may be set up
    // incorrectly.
    // *Action: Turn on tracing at the ADMIN level and reexecute the operation.
    // Verify that the ORACLE Server executable is present and has execute
    // permissions enabled. Ensure that the ORACLE environment is specified
    // correctly in LISTENER.ORA. The Oracle Protocol Adapter that is being
    // called may not be installed on the local hard drive.  Please check that
    // the correct Protocol Adapter are successfully linked.
    // If error persists, contact Oracle Customer Support.The listener only starts a dedicated server process when servicing a client request. So I fail to see how your SQL ("with simple inner joins") will somehow reconnect to the listener. Unless you are use loopback database links?
    Also, do not confuse symptoms as all relating to the same problem.
    Exactly what are the sequence of events that results in the error? What client are you using? How does it connect (TCP or IPC)? If TCP, does it use a dedicated or shared server? Are there any related errors in the alert log? Is there a trace file created for your session? What is the exact o/s and Oracle versions you are using?

  • Is "shutdown" = "stop Oracle services"?

    When I perform a "shutdown" command from sydba:
    Is this the same as if I do no shutdown but stop all the Oracle services e.g. (for XE):
    XETNSListener
    and
    XEService
    If it is more: What more?
    Peter

    No it is not the same. The listener and other Oracle processes like the agent are controlled differently than the database service. Please see your documentation.
    Sorry forgot the link
    http://download.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/toc.htm
    Regards
    Tim
    Edited by: Tim Boles on Apr 22, 2009 8:00 AM

  • Oracle service wont stop properly via net stop

    Hi all,
    A bit of advice required please!
    We have 2 Oracle instances running on the same server, and every night the services are meant to shut down via a scheduled task from a batch file using net stop.
    Most of the time, one of the services fails to stop. The command line says oracle service could not be stopped. Sometimes, this seems to crash the service, ie: it appears started but doesn't work and needs re starting.
    To combat this, i am in early every morning to restart the services before people arrive! if someone could point me in the right direction as to what co6uld be causing this i would be gratefull!
    Thanks in advance.
    Edited by: user10873866 on 30-Jan-2009 00:06

    Well, for me the best way seems to contact with third party who installed everything and ask for their help.
    If You don't have knowledge regarding what is running and how it's running, then probably don't touch it.
    And by the way explanation for net stop failure could be this:
    When you do a "net stop" windows tries to stop the service. The default behaviour is to shutdown the related instance in immediate mode. But, there's a timeout defined by the ORA_SID_SHUTDOWN_TIMEOUT registry value. Till 9i it was 30 seconds. On 10g it's 90sec default. This means that when Windows tries to shutdown the service, in mode immediate, if in 30/90sec the instance isn't stopped it'll be shutdown abort.
    And fo rproduction database shutdown abort is probably not the best what You can perform each night.
    In alert.log You could see what exactly happens during net stop. alert.log is under bdump directory, if You can do sqlplus "/as sysdba" to the database and execute
    show parameter background
    then You will see there bdump is located on Your system.
    Edited by: Laura Gaigala on Jan 30, 2009 11:07 AM

Maybe you are looking for

  • Problem in passing vector from an applet to servlet

    Hi, I m facing problem in reading an object in the servlet (that i send from an applet). I have used BufferedInputStream ... The servlet reads the object but it takes about 30 seconds to do this ... If i don't use BufferedInputStream, it gives an "er

  • Phones on contract

    I am wanting to put my Verizon phone on a contract but don't want to go into the store to do it. can I do this online.

  • Scroll bars turn white and don't move until mouse hovers over.

    I recently started using Photoshop on my surface pro 3 and when I scroll (using the track pad) side to side and up and down the scroll bars will turn a white color and just freeze. The bars don't go back to normal until I take my mouse and hover over

  • Change of scedule finish date

    Hi Gurus, I have items of two operations on a routing with different work centers and control keys. Now, my production order is calculating the finish date as per the sceduling as of operation one.I need the production orders to work out the finish d

  • Can I replace media within a project

    Hello, I am on entry level status when it comes to flash and need to set up a flash intro for an Html site I'm designing. I was thinking of purchasing a template on monstertemplates.com but wanted to know how hard would it be to say swap out text tha