Stopping the Users from Postings Transactions in a Currency

Hi Now that Slovakia currency has switched over to EURO, we want to stop our users from posting the transactions in SKK currency accidentally. Is there some config settings that can be done for this purpose..

Hi Pete,
You can create a validation in the transaction OB28.
example:
Prerequisite BKPF-USNAM <> " "
Check BKPF-BKPF-HWAER
check bkpf-BKPF-WAERS
You should create a message error in the transaction SE91 to be displayed:
Example:
Z1 001 You are not allowed to use this currency anymore, obsolete !!
After that run the program RGUGBR00 with just the last 2 flags not selected.
I hope it helps.
Best Regards,
Bruno Wiener

Similar Messages

How to stop the users from changing the Decimal in SAP

How to stop the users from changing User Profile

Hai,
It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
Hope this helps.
Regards,
Yoganand.V

Restrict the Users from doing Transactions from transactional Iview.

Dear all,
We are having some transactional iviews in EP7.0 and ECC 6.0. We want to restrict the enduser from doing transactions by entering the transaction codes.
1.Can we remove the command line
2.Can we restrict the user
We are using transactional iviews using connectors.
Reply asap
Thanks
Ravi.S

1) There is an its parameter you add in transaction SICF in the webgui service. It is something like ~noheaderokcode.
See here:
http://help.sap.com/saphelp_webas620/helpdata/en/96/c09788c65b11d480c100c04f99fbf0/content.htm
2) Backend authorisations define which transaction codes you have access to.
Paul

How to stop the users from saving the PO when there is error message

Hi Guru,
The error message had appeared but the user still can choose to hold the PO even though there is an error.
They do not want to let the user to have a choice to save the PO once there is an error.
Please advice where i can out this checking in.

Dear Sally,
As per OSS: Note 606728 - Hold Functionality of the PR & PO - Gaps.
The only way you can stop the hold functionality is by implementing the BADI: ME_PROCESS_PO_CUST.
I am copying the OSS text for your reference.
Summary
Symptom
It is possible in the system to create/hold a purchase order (PO) referencing a held purchase requisition (PR), but your business process requires that this not be possible in your installation.
Other terms
Hold, ME21N, ME52N, Parking, Save without Check, Held PR, PO referencing a held PR, Commitments, reduction of PR by a held PO
Reason and Prerequisites
Cause: The functionality is not provided in EA-PS 110.
Prerequisites : You must be on EA-PS 110 to implement this note
Solution
You can implement some customer BAdI's provided by SAP to get this functionality. Note that customer implementations of the BAdI's provided by SAP are upwardly compatible. The text that follows gives details of how to implement the customer BAdI's to accomplish this functionality.
This functionality might be provided in future releases. However, we cannot make any binding statements at this time in regard to the scope of this development and when it will become available.
The following are the steps required to implement the customer BAdI to give an error message when a user tries to create a PO referencing a held PR.
1. Go to transaction SE18. Enter the definition name as ME_PROCESS_PO_CUST. Select the push button display.
a) Choose Implementation -> Create.
b) Enter an implementation name. Choose Enter.
c) Enter a short text to describe the purpose of the implementation, then save the implementation.
d) Select the tab interface, then double-click the method "process_item".
e) Create a message to issue a message that the PR is on hold.
f) Enter the following code in the method:
                    DATA: LS_MEPOITEM TYPE MEPOITEM.
                    DATA : MEMORY     TYPE EBAN-MEMORY.
get current data from business object
                    LS_MEPOITEM = IM_ITEM->GET_DATA( ).
Check if the PO references a PR and check if the PR is not on hold
If the PR is on hold give an error message
                      IF NOT LS_MEPOITEM-BANFN IS INITIAL.
                        SELECT SINGLE MEMORY INTO MEMORY
                        FROM EBAN WHERE BANFN = LS_MEPOITEM-BANFN
                                    AND BNFPO = LS_MEPOITEM-BNFPO.
                        IF MEMORY = 'X'.
                           MESSAGE E900(ZM). "The message that you have created in step 6
                        ENDIF.
                    ENDIF.
g) Activate the implementation.
2. If you do not want to let the user put the PO referencing a held PR on hold, you have to also implement the BAdI ME_HOLD_PO. The following are the steps to implement the BAdI.
a) Go to transaction SE18.Enter the definition name as ME_HOLD_PO and click on the 'DISPLAY' button.
b) Go to Implementation -> Create.
c) Enter an implementation name, then choose Enter.
d) Give some short text to describe the purpose of the implementation, then save the implementation.
e) Select the tab interface. Double-click the method IS_ALLOWED.
f) Enter the following code in the method:
                    DATA : IM_BEKPO_WA TYPE BEKPO.
                    DATA : MEMORY TYPE EBAN-MEMORY.
                    *-Look if the PO refers to a Held PR
                    LOOP AT IM_BEKPO INTO IM_BEKPO_WA
                           WHERE NOT BANFN IS INITIAL.
                             SELECT SINGLE MEMORY INTO MEMORY
                             FROM EBAN WHERE BANFN = IM_BEKPO_WA-BANFN
                                        AND BNFPO = IM_BEKPO_WA-BNFPO.
                             IF MEMORY = 'X'.
                    *-Do not allow the PO to be kept on hold
                    *-if the PO is refering a held PR
                               CH_ALLOWED = ' '.
                              ENDIF.
                    ENDLOOP.
g) Activate the implementation.
I hope it helps.
Kind Regards,
Prakash

How do I stop the user from saving information onto my original?

Hello everyone,
I created a form that I plan to put on a website but, I have one problem. The user is allowed to fill-in the form and save the new data onto the original. How can I set up the form so that the user cannot save over the original but, still be able to save a copy and use the "Submit by Email" button? Any help would be appreciated.
Thank you,

Use these steps to remove saved (form) data from a drop down list:
#Click the (empty) input field on the web page to open the drop down list
#Highlight an entry in the drop down list
#Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
You can remove saved Password(s) here:
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
*http://kb.mozillazine.org/Password_Manager
Websites remembering you and automatically log you on is stored in a cookie. 
So you need to remove the cookies from that site to reset this choice.
*Tools > Options > Privacy > Cookies: "Show Cookies"

Stop the report from firing until the user clicks the Go button?

Hi All,
Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
Thanks

Thanks for the replies,
In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
Thanks

How to tranport the users from SAP R/3 to portal ?

Hi All,
I had connected to SAP R/3 system from portal. I am trying to tranport the users from SAP development server . So that everyuser can enter through the portal only and work on SAP.
Please guide me the procudure how can i tranport the users from SAP system to portal.
Please urgent replies are appreciated .

Hi Abhishek,
Thanks for your information.
please let me tell you the detailed information. My basis guy had configured the system for me as i didnt have any idea on installation procedure. So i am facing th e fallowing problems.
 First Problem
I am not able to create the user from portal directly. Its showing the fallowing error.
An error occurred in the persistence; contact your system administrator.
so i had created the users in WAS by SU01.
Second
We have some users at production server ( Assume 5 users ). and those users need to be mapped at portal. So that those users can directly enter into portal and operate on SAP system .
If u dont mine Please provide with me the steps to fallow
Third
i had created some transactional Iviews that are working fine when i am log in with Administrator( super administrator role). The problem is that the reports are not showing when i am log in with general user ( with out super administrator role ) .
Its showing the error
Could not able to look up the system.
And the problem with user mapping also .
For aministrator its working fine .and for a general end user ( created on WAS )
i am not able to provide user mapping. Its showing
There are no systems available for user mapping for the selected principal
wat could be the problem ?
Your solutions will be appreciated .please urgent

How do I stop the Finder from seeing SMB (Windows) shares on the network?

I have the OPPOSITE problem most people have -- Windows Sharing works TOO WELL.
I've donated a refurbished eMac to the local homeless shelter. I figured I'd made the system secure, and prevented any monkey business. Turns out the windows machines on the network are COMPLETELY insecure (guest access to everything is enabled). The problem is that the Mac is TOO friendly -- it automatically connects to the server as a guest, and happily presents everything to the user.
I've tried a dozen different things (I've removed the 'Shared' section from the sidebar in the Finder windows (Go->Network is still there, Doh.), tried to turn off File Sharing, and even disabled the mount_smbfs command in the /sbin directory with "chmod 0 mount_smbfs".)
I've asked the folks there to call in a PC tech and fix their security problem -- but it's a good question to which I've found no suitable answer... How to I stop the Mac from connecting to SMB Shares on the local network?
Thanks.
-JD.

Same problem, keep getting a pop up with connection failed you do not have permission to access the server. The server is a windows 7 box, Starting happening after an up grade to windows 7. Nowhere can I find how to stop trying to connect. I am sure its at the unix level of samba but what to do is another question

How to find the user-exit for transaction fpp2

Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.

Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar.

How to restrict the user from making any changes in Sales order- item level

Hi to all
How to restrict the users from making any changes in sales order at item level if the same sales order is released by senior user through status profile.
Regards
Anish Parikh
Edited by: anish parikh on Jan 24, 2008 5:16 AM

Hi Anish,
This can be achieved through the roles and authorization.
This can be done through the basis team. they can create user profiles and roles.
For the roles they assign some transaction codes so that they can view the only assigned tr. codes.
Like that ur requirement can be done.
Also u can prevent the user to change any fields in the sales order screen (VA02). for that please modify the authorisations.
Hope i answers.
Reward points if useful.
Edited by: kaleeswaran bhoopathy on Jan 24, 2008 9:57 AM

How to prevent users from creating transactional problems?

Dear Sirs...
Using JDeveloper 10.1.2 and ADF UIX technology. If i created a web application that contains many pages. Assume the application contains pages A,B,C,D.
The end user should access the pages A then B then C then D to get the transaction executed and commited correctly.
the problem is:
1- if a user navigates from A to B to C then he press the Back button to A then he commits the transaction, the data would be stored in correctly.
2- if page C requires some preparations in page B (initalization of session variables) and the user enters page A then he changes the URL to C, then this would cause inproper execution of application and so the data would be stored incorrectly.
so how can i prevent the user from pressing the back button of the browser (which i do not think is possible) or how can i prevent him from making any errors by inproper page navigation?
thanks for any help in advance and best regards

I really don't know if this is the correct way of doing it, but we prevent navigation directly to any page within our application if the HTTP Referer header is null. If it's null, we redirect to a page that says the user should use the navigation buttons provided and not enter the page via bookmarks, history, or direct navigation via a typed in URL.

How to stop the Calendar from editing your input?

How to stop the Calendar from editing your input?

I am constantly finding that Calendar Version 8.0 thinks it knows what I want to type but it incorrectly takes numbers and days and times out of my input and changes my appointments. I hate this new supposedly "smart" feature. Even when I edit my event correctly a second or third time it rewrites my input incorrectly again. I have to use my iPhone to override the annoying editing on my mac. I am ready to find a new calendar program unless Apple allows users to input what they want without their information being incorrectly edited.

To differentiate in the user-exits what transaction has executed first

Hi,
I have a problem,
For transactions Iw32 y iw34 EXIT_SAPLCOIH_006 user-exit are called up when a maintenance order is updated
from any of two transactions.
I want to differentiate in the user-exits what transaction has executed first (origin) because sy-tcode in both cases contains iw32 ' because IW38 transaction calls UP always to the transaction iw32 for update of a maintenance order.
thank´s
Regards.

If that is the case, and the IW32 is begin called from IW38 via some batch input mechanism, then maybe this code will work. You can wrap your code in this IF statement. Here we are saying that we only want to do this when the tcode is IW32 and it is not being called in batch input(call transaction) or called by another program.
if sy-tcode = 'IW32'
and sy-binpt = space
and sy-calld = space.
endif.
Regard,
Rich Heilman

Stop the Frame from being able to be dragged

Hi all
I was hoping that someone could tell me how to stop the frame from being dragged
while a dialog is showing.
I am using this code to call the dialog.
When is is visible I can still click and drag the frame behind it.
I want to set it so you can not drag it until the dialog has be closed.
 public void runStartup() {
 Login dlg = new Login(this, "Login", true);
 Dimension dlgSize = dlg.getPreferredSize();
 Dimension frmSize = getSize();
 Point loc = getLocation();
 dlg.setLocation((frmSize.width - dlgSize.width) / 2 + loc.x,
 (loc.y + 22));
 dlg.setModal(true);
 dlg.pack();
 dlg.show();
 }

here is the Login Class
package build0_0_1.dialogs;
import java.awt.BorderLayout;
import java.awt.Frame;
import javax.swing.JDialog;
import javax.swing.JPanel;
import java.awt.*;
import com.borland.jbcl.layout.XYLayout;
import com.borland.jbcl.layout.*;
import javax.swing.JLabel;
import javax.swing.JComboBox;
import javax.swing.JPasswordField;
import javax.swing.JButton;
import javax.swing.ImageIcon;
import build0_0_1.images.image_pics;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.MouseEvent;
import java.awt.event.MouseAdapter;
import java.awt.event.FocusEvent;
import java.awt.event.FocusAdapter;
import build0_0_1.mysql.MYSQLDAO;
import build0_0_1.Command;
import javax.swing.*;
import java.sql.SQLException;
* Title: 
* Description: 
* Copyright: Copyright (c) 2005
* Company: 
* @author not attributable
* @version 1.0
public class Login extends JDialog {
 ImageIcon back;
 MYSQLDAO mysqlDAO;
 Command command;
 JPanel panel1 = new JPanel();
 XYLayout xYLayout1 = new XYLayout();
 JLabel loginLabel = new JLabel();
 JLabel nameLabel = new JLabel();
 JLabel passwordLabel = new JLabel();
 JComboBox jComboBox1 = new JComboBox();
 JPasswordField passwordField = new JPasswordField();
 JButton loginButton = new JButton();
 JButton cancelButton = new JButton();
 JLabel backLabel = new JLabel();
 JLabel logoLabel = new JLabel();
 JComboBox locationComboBox = new JComboBox();
 JLabel locationLabel = new JLabel();
 public Login(Frame frame, String string, boolean _boolean) {
 super(frame, string, _boolean);
 try {
 setDefaultCloseOperation(DISPOSE_ON_CLOSE);
 jbInit();
 pack();
 } catch (Exception exception) {
 exception.printStackTrace();
 public Login() {
 this(new Frame(), "Login", false);
 private void jbInit() throws Exception {
 this.setResizable(false);
 this.setUndecorated(true);
 this.setSize(new Dimension(450, 220));
 back = new ImageIcon(image_pics.LOGIN_BACK);
 logoLabel.setIcon(new ImageIcon(image_pics.SMALL_LOGO));
 panel1.setLayout(xYLayout1);
 panel1.setMinimumSize(new Dimension(450, 220));
 panel1.setPreferredSize(new Dimension(450, 220));
 loginLabel.setText("Login");
 nameLabel.setFont(new java.awt.Font("Lucida Grande", Font.PLAIN, 11));
 nameLabel.setText("User Name");
 passwordLabel.setFont(new java.awt.Font("Lucida Grande", Font.PLAIN, 11));
 passwordLabel.setText("Password");
 backLabel.setIcon(back);
 passwordField.setFont(new java.awt.Font("Lucida Grande", Font.PLAIN, 11));
 passwordField.setText("Enter Password");
 passwordField.addFocusListener(new
 Login_passwordField_focusAdapter(this));
 loginButton.setBackground(new Color(231, 231, 231));
 loginButton.setFont(new java.awt.Font("Lucida Grande", Font.PLAIN, 11));
 loginButton.setText("Login");
 loginButton.addActionListener(new Login_loginButton_actionAdapter(this));
 cancelButton.setBackground(new Color(231, 231, 231));
 cancelButton.setFont(new java.awt.Font("Lucida Grande", Font.PLAIN, 11));
 cancelButton.setActionCommand("cancelButton");
 cancelButton.setSelected(true);
 cancelButton.setText("Cancel");
 cancelButton.addActionListener(new Login_cancelButton_actionAdapter(this));
 jComboBox1.setFont(new java.awt.Font("Lucida Grande", Font.PLAIN, 11));
 jComboBox1.setEditable(true);
 logoLabel.setBorder(null);
 logoLabel.setHorizontalAlignment(SwingConstants.CENTER);
 logoLabel.setHorizontalTextPosition(SwingConstants.CENTER);
 logoLabel.setText("");
 locationLabel.setFont(new java.awt.Font("Lucida Grande", Font.PLAIN, 11));
 locationLabel.setText("Location");
 locationComboBox.setFont(new java.awt.Font("Lucida Grande", Font.PLAIN,
 11));
 panel1.add(cancelButton, new XYConstraints(337, 170, -1, -1));
 panel1.add(loginButton, new XYConstraints(245, 170, -1, -1));
 panel1.add(loginLabel, new XYConstraints(208, 21, -1, -1));
 panel1.add(logoLabel, new XYConstraints(21, 20, 57, 54));
 panel1.add(passwordLabel, new XYConstraints(99, 141, -1, -1));
 panel1.add(locationLabel, new XYConstraints(104, 72, -1, -1));
 panel1.add(nameLabel, new XYConstraints(90, 106, -1, -1));
 panel1.add(passwordField, new XYConstraints(185, 138, 219, -1));
 panel1.add(jComboBox1, new XYConstraints(183, 103, 219, -1));
 panel1.add(locationComboBox, new XYConstraints(183, 67, 219, -1));
 panel1.add(backLabel, new XYConstraints(0, 0, 451, 223));
 getContentPane().add(panel1);
 panel1.grabFocus();
 * Exit action performed.
 * @param actionEvent ActionEvent
 public void cancelButton_actionPerformed(ActionEvent actionEvent) {
 System.exit(0);
 * Login to MySQL Server. Using User ame and Password
 * This pass into MYSQLDAO user Name and Password
 * @param actionEvent ActionEvent
 //This pass into MYSQLDAO user Name and Password
 public void loginButton_actionPerformed(ActionEvent actionEvent) {
 String pass = new String(passwordField.getPassword());
 if (!pass.equals("Enter Password")) {
 System.out.println("This the username " +
 (String) jComboBox1.getSelectedItem() + "\n" +
 "Password is " + pass);
 try {
 mysqlDAO = new MYSQLDAO();
 mysqlDAO.setUserName((String) jComboBox1.getSelectedItem().
 toString().
 trim());
 mysqlDAO.setPassword(new String(passwordField.getPassword()));
 } catch (SQLException ex) {
 // handle the error
 System.out.println("SQLException: " + ex.getMessage());
 System.out.println("SQLState: " + ex.getSQLState());
 System.out.println("VendorError: " + ex.getErrorCode());
 } catch (Exception ex) {
 // handle the error
 System.out.println("Erro no registro do Driver Mysql!!!!");
 hide();
 * Password field select all.
 * Feild is select. The user can just start typing
 * and overright the password feild
 * @param focusGained FocusEvent
 public void passwordField_focusGained(FocusEvent focusEvent) {
 passwordField.selectAll();
class Login_loginButton_actionAdapter implements ActionListener {
 private Login adaptee;
 Login_loginButton_actionAdapter(Login adaptee) {
 this.adaptee = adaptee;
 public void actionPerformed(ActionEvent actionEvent) {
 adaptee.loginButton_actionPerformed(actionEvent);
class Login_passwordField_focusAdapter extends FocusAdapter {
 private Login adaptee;
 Login_passwordField_focusAdapter(Login adaptee) {
 this.adaptee = adaptee;
 public void focusGained(FocusEvent focusEvent) {
 adaptee.passwordField_focusGained(focusEvent);
class Login_cancelButton_actionAdapter implements ActionListener {
 private Login adaptee;
 Login_cancelButton_actionAdapter(Login adaptee) {
 this.adaptee = adaptee;
 public void actionPerformed(ActionEvent actionEvent) {
 adaptee.cancelButton_actionPerformed(actionEvent);
}

Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

If you are printing via a Windows shared printer and it is the Windows user account that you are being prompted for then you can save this in the Keychain, as shown below.

Stopping the Users from Postings Transactions in a Currency

Similar Messages

Maybe you are looking for