Stor.e Slim for Mac after password no acced

Hi,
I have a Toshibe 1TB Stor-e Slim for Mac.
I backed up all my data on the drive and created a password with the password tool.
I had to reinstall my Macbook Pro but unfortunately after that the device is not accessible.
I tried to search for the password tool but i haven't fond it.
Maybe I need this password tool to reinstall on my macbook.
All help in appreciated because all my data is on the device.
Thanks in advance!
G.

The STOR.E SLIM FOR MAC 2.5" 1 TB SILBER USB 3.0 was delivered with the password protection software.
If you used this software to protect the files then you need to install and to use this software again in order to get the access to the protected files.

Similar Messages

Bluetooth keyboard and Word 2008 for Mac after Yosemite

Bluetooth keyboard (apple) on 27 " iMac (mid 2010) won't work in Microsoft Word 2008 for Mac after Yosemite. It is paired and recognized and works normally otherwise. Mouse works fine, too.

Follow up: After trying a number of different approaches I finally shut off the iMac and let it stay off for several minutes and then restarted it. This is something I had read that another user had tried and had worked for him. To my surprise, the keyboard now works in Word 2008. I have no idea if this will continue to work, or if it might work for any of you, but I would give it a try.
Process:
Shut Down your Mac
Let it stay off for several minutes
Power up and check to see if your bluetooth keyboard works in Word 2008.
Good luck!
chuck

I have a FreeAgent Goflex drive (for Mac) after a while the icon disappears from the desktop and can only be restored by reconnecting

I have a FreeAgent GoFlex backup drive (for Mac) after a while the icon disappears from the desktop and can only be restored by reconnecting the firewire. This also happens when I use the USB connection as well. Thanks

Did you use any of the "sleep" drivers supplied? I have found it best to just totally reformat/erase the drives and let the OS handle them.

Duplicate emails on outlook for mac after upgrading to mavericks

I was getting duplicate emails on my outlook for mac after upgrading to mavericks
After reading several websites, I realise this is a common problem.
some people suggesting checking " prevent app nap"
this seemed to work for a while, but is now back again
it is very difficult to handle, with hundreds of emails downloading each time i log in
regards
seema

Try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

In my newly purchased MacBook Air, Dropbox does not function properly. It asks for Mac OS Password for my computer which I do not have.

In my newly purchased MacBook Air, Dropbox does not function properly (it shows MS Word, Excell and Power Point docs but not pictures). It asks for Mac OS Password for my computer which I do not have. How should I get this password ?

If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

Problems with Office 2011 for mac after upgrading to Mountain Lion

Office 2011 for mac worked fine with Lion on my MacBook Air. I had been having some problems with my computer freezing and crashing, so the folks at the Genius Bar wiped my computer clean and installed Mountain Lion for me.
I have full backups (Time Machine) from before the wipe on my external hard drive, but I was told not to restore from the backup, that I should drag and drop files instead. I was also told to re-install any program for which I had the disk. I reinstalled Office 2011 via the disk.
Two major problems followed:
1.     I lost all my old emails (I use Mail). Even rebuilding the library or trying to restore them from Time Machine don't get them back.
2.     Word and Excel don't seem to recognize me anymore. I can pull up and modify an old document or workbook, but I cannot "save" my changes. I have to hit "save as." That's a pain, but there's a worse problem.
I have no trouble saving these "save as" versions to my desktop or to my Documents file. But I cannot save them anywhere else — even to the folder where I found the original document. I get a message that I don't have the necessary permissions to access or modify the folders. I'm asked to authenticate, and I do, but that doesn't seem to do anything.
I tried Get Info on the workbooks and documents, and I'm clearly granted Read and Write permission.
I've done a permissions repair via Disk Utility. There were some things to repair, but it didn't solve my problem.
I know I can move all documents to an external hard drive and then recreate all the folders, saving all the documents and workbooks "as" but it seems a huge amount of work. Can anybody suggest an easier route or how to get my email history?

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: 'resetpassword' (without the 's) and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

Cannot Interact with Microsoft Word 2008 for Mac after Opening

After I open Microsoft Word 2008 for Mac, either by opening a .docx file or opening Word from the Applications folder, I am not able to interact with the application whatsoever. Selecting its icon in the dock does not bring any of its windows to the front, nor does it show the Word menu at the top; instead, it still shows the menu of whatever application was previously selected. But the windows do exist if I move other windows out of the way. If I do get to a Word window, I cannot click on anything, select anything, resize it, close it, or scroll.
Other info: If I click and hold the Word icon in the doc, the menu displays as if the application were functioning normally; it does not show a Force Quit option, as it would if Word were frozen. I do not see any dialogue boxes or anything that would take the focus away from the other windows.
Background: I was able to successfully use Word without any problems before today, using the same installation of the application, same computer, and same operating system. I also never had this problem before Mavericks, though, as I said before, I didn't always have this problem in Mavericks.
How do I get Word to function normally again? Thanks for any help you can provide!

After letting Word run for quite a while, a popup window told me there was an issue with the database. I opened the Microsoft Database Utility and rebuilt the database. It seems to be working fine now.

How do i download all the information onto a seagate go flex slim for mac

how do i download all the information onto a seagate go flex slim for mac

Sailordog wrote:
Any suggestions on how to properly format and drag into this lttle guy would be great.
1. go into FINDER at top then PREFERENCES then GENERAL tab
then check "hard disks" and "external disks"
THIS WILL PUT A HD ICON ON YOUR DESKTOP YOU CAN OPEN AND DRAG AND DROP FILES TO
Your new HD needs to be formatted for use on your Mac, so:
2. TO FORMAT THE HD:
Applications > utilities > disk utility
go to DISK UTILITY and verify what it says your HD is formatted as under the "ERASE" tab
see from mine below, HD on left selected, .......ERASE tab highlighted.... and middle right roughly, it says "MAC OSX EXTENDED JOURNALED"
thats the format, but yours may be different of course
bottom right ERASE tab lets you erase/ FORMAT your external (remember this erases all data ON THE HD!)
Format/erase it as: "MAC OSX EXTENDED JOURNALED"
highlighted in RED Erase.......format (middle) ...........erase ACTION to Erase/Format (bottom)
Now you can drag and drop files

Installed MS Office for Mac, after uninstalling test drive, still reg to TD

I installed MS Office for Mac 2004 this morning, after being very careful to uninstall the test drive version, after reading about problems it causes not to do so. I followed the instructions to uninstall, emptied the trash after, did the installation, updates, etc. But when I look at the "about" section of word, etc, it shows that the product is licensed to "Office 2004 Test Drive User". I did fill in the info on name, address, etc, and the "test version" watermarks that I was seeing on excel spreadsheets pre-installation are gone now. I have rebooted the machine. Do I need to register each application separately? Did I miss something in the uninstall?
Also, after installing the new Office, I had problems accessing the internet from accounts other than the one from which I'd done the installation. I asked about that in the internet related subforum here, thought I had it fixed, but it's been inconsistent, seems to work on-and-off in the different accounts. Did the accessing of the net during the course of the install knock something out of place?

I installed office after deleting test drive. Registration is fine. Microsoft creates a user pref folder for each user account. This will be activated with your individual pref. the first time you open one of the office programs. It will be different/reset for each user on the computer. So it is possible that different users would experience different problems connecting to the internet. I copied my users pref and library folder over from my powerbook to the imac and all of my settings seem to work just fine on the new imac.
My suggestion would be to uninstall all versions of office on your imac and then reinstall office 2004. Be sure to do this in an administrator account and to repair permissions before and after install.
Good luck!

Can't connect remote PC with Microsoft Remote Desktop for Mac after using a new router

I'm using a Windows 8.1 computer as a HTPC to download files and I set it logins automatically and I just need to press the power button then use RD for Mac to control the HTPC without extra monitor, keyboard...
Here is the problem: After I took my Mac and HTPC to another place, I can't connect it with new router now. (I change the PC name to new local IP, nothing else changed)
It shows on screen that:
Unable to connect to remote PC. Please verify Remote Desktop is enabled, the remote PC is turned on and available on the network, and then try again.
I can use shared disk drive of the HTPC on my Mac so I know the connection works.
Thanks!

Hi,
Thank you for posting in Windows Server Forum.
Generally, if it is a home network environment, please use IP address of the target computer as the PC name.
Remote Desktop Client
http://technet.microsoft.com/en-US/windowsserver/dn463762
Above one quoted from below thread.
Microsoft Remote Desktop
Hope it helps!
Thanks.
Dharmesh Solanki

HT204655 My photos won't import into Word for Mac after OS X upgrade

After upgrading to the new OS X Yosemite does anyone know how to import photos into Word or Excel for Mac? That library is now grayed out for me and I am in mid-project on Word. I used to be able to copy and paste right into my document, now it seems I must exclusively work within the Photos program.

I actually found that the issue started for me after the MS Office update last week. It was originally working fine with the new Photos for Mac App until the MS Office update. Now Word can't find the photo browser, it only shows Photo Booth. I also can't drag drop photos from the Mac App into Word, like I used to be able to. At the moment I export the photos to a directory then I can input from file in Word. That works, but it's a bit untidy.
I'm thinking off trying the Office 2016 for Mac, which are available now as demos. Unfortunately Microsoft don't reply to questions that are raised, so I'm not sure what the underlying issue is with photo's not working.

Itunes store not working for Mac

I have just downloaded the new itunes 10.5 and the itunes store won't open. I connect my iphone4s, and that won't connect to the itunes store either and won't update apps, or do much of anything. I've done all the software updates. Any help out there?
For Mac OS X 10.5

iTunes uses the back-side code in Safari for all its rendering of the Store, so no, there's no way around it. If you don't have the ca. forty megabytes Safari takes, then you're going to have problems with your computer - Mac OS X needs much more free space than that - so you really need to clear off some space on the drive. Then you'll be able to install the new version of Safari.
Regards.

How to reinstall Microsoft Office for Mac after new hard drive?

Recently I had a problem with my Macbook Pro, and unfortunately had to purchase a new hard drive and have it installed. This also led to the loss of data and other things, such as Microsoft Office for Mac. I know this is an Apple community, but I get better answers here than at the Microsoft communities so I'm hoping someone can help find out how to reinstall Microsoft Office 2013. I logged onto my Microsft account and it says that there is no record of me purchasing Microsoft Office on that account but I know thats the account that it was purchased on, so i cannot get my product key to reinstall it as directed. Someone please help!!!!

Try calling MS support and explaining the situation, maybe they will issue a new key.
1 (800) 642-7676 (Consumer)
Microsoft Corporation, Customer service
24/7 Microsoft Support - Microsoft.MyPhoneSupport.com
Admicrosoft.myphonesupport.com/
1 (855) 698 3249
Phone Our Tech Support Experts 24/7 For Microsoft Support. Call Now...
Support for Microsoft? - Call Toll Free Now
Adwww.supportdeskwiz.com/Microsoft
1 (855) 760 8099
24x7 Tech Support for Microsoft by SDW.
Microsoft Windows Support - Call US Toll Free
Admicrosoft-os-support.itechline.com/
1 (855) 281 4201
Tech Support for Microsoft Windows.
Live Tech Support - Windows 7 Support - Outlook Support

HT1199 Why do I have to re-purchase MS Office for mac after OS 10.7 upgrade?

I upgraded to OS 10.7.4 and now I have to re-purchase Microsoft Office for Mac? What's up with that?

If you use Office 2004, you need to update to Office 2008 or 2011 because 2004 isn't compatible with Lion (PowerPC). Also, you can buy iWork

Cannot launch PSE 6 for Mac after installation - HELP!!!

I just installed PSE 6.0 for Mac on my new iMac (I'm using OS X 10.5.8), and it installed successfully (at least it appeared to). My first problem was that it did not allow me to register the serial number. That's probably no big deal, but then when I went to start the application, the main window came up, but it did not let me do anything, not even EXIT (it was grayed-out). I shutdown and restarted, but this didn't change anything. I thought PSE 6.0 for Mac would work with OS X 10.5.8? Not sure what's going on here. And why aren't there any error messages telling me what's wrong??? I'm on hold right now to Adobe, but nobody is answering. Very frustrating ...

I just did a 'verify permissions' and it returned 117 messages that said "permissions differ on ... ". Then I did a 'permissions repair', but it did not seem to repair anything because the same "permissions differ on ... " messages came back. It also said "Permissions repair complete", so I don't really know what that means (successful or not??). Below are two examples of the 'error' messages:
1) Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2) Permissions differ on "System/Library/PrivateFrameworks/DotMacSyncManager.framework/Versions/A/Resources/DotMac SyncHelper.app/Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
What does the permission "l" mean in #1?
Most of the returned messages are similar to #2 ( ... should be ? ---- ...). Not sure if this is okay.

Stor.e Slim for Mac after password no acced

Similar Messages

Maybe you are looking for