Storage Bin Scenario in Warehouse

Hi,
How could be the scenario in warehouse for Bin ?
In What order it will contain Handling Unit, Quant, Materials.
Thanks ...

Hi,
hope this is what you have asked for.
Physical Warehouse Structure:
After Goods Receipt goods reach GR area-->Say High Rack Storage/Bulk Storage/Fix Bin Area, then after GI moved to GI area.
to elaborate more after GR-->  in GR area we have storage type say A, and respective Storage Types for High Rack Storage/Bulk Storage/Fix Bin Area can be D, E and F respectively.
Bin Types: High bins,  Lower Bins depending upon Fast Moving Items in the storage section.
WM in system hierarchy :-
WH Number>Storage Type>Storage Section/Picking area>Storage Bin>Quant
Quants are defined by --
- Material / Batch
- Stock Category
- Special Stock
- Plant / Storage Location
- Storage Unit Number
regards,
Prashant Rathore.

Similar Messages

  • Inspection lot creation on storage bin

    Hello all,
    I am wanting to learn how to create an inpection lot of stock within a storage bin.
    I ask because we have many storage bins in our warehouse location storing the same material.
    If I do a MIGO 322 transaction in inspection lot there is no where to specify bin location, it looks at the warehouse as 1 storage location.
    In the lower half of the migo screen there is a 'storage bin' section but it is blocked out and I cannot identify which storage bin I am wanting to inspect within that storage location.
    I know I can create a transfer through LT01 however this still doesn't appear in QA32 inspection lots.
    I want the bin location to stay in the same storage location but be flagged for quality inspection.
    Thanks,
    Chris
    Edited by: gmanwizo on May 7, 2011 5:58 AM

    Hi,
    It seems you have both MM and WM activated. You have to assign storage locations to warehouse numbers in customizing, definition of organization step. Then when you do a 322, transfer requirements will be created by the system and you can transfer the material to a storage bin by turning the requirement into a transfer order. Assignment of new storage locations to warehouses may be tricky, you better ask for consulting on this matter.

  • Need to enter the storage bin manually

    Hi Team,
    Currently while posting the IM movement type 311, storage type(FIFO) search strategy is configured for stock removal process.
    Now the requirement is for certain materials, while doing the transaction, we don't want to pick the bin automatically(by using the FIFO), we want to enter the Storage bin manually, please suggest.
    Advanced Thanks,
    AN Reddy.

    Hello A.N Reddy,
    There is a confusion here. Are you talking about WM or EWM.
    If it is WM, then, I would suggest you to enable, Manual Storage Bin Input for respective WM Movement Type in WM Movement Configuration. That will request you to enter Storage Bin Manually during TO Creation.
    If it is EWM, For your process type, Make Search Seq field as Blank and  keep your Putaway Rule as " No Putaway Rule ". This will request to you to enter the storage bin Manually during Warehouse Task Creation Process.
    In EWM Outbound Process, you have to empty your search criteria in your Pick Rule.
    Regards,
    Sathish

  • Specifying storage bin for quality inspection.

    Hello all,
    I am wanting to move a material, that is stored in multiple storage bins in our warehouse, into an inspection lot.
    I can create a 322 movement in MIGO however this doesn't specify storage bin location, it looks at the warehouse as a whole.
    So can you please help me to specify the storage bin that I am wanting to create a manual inspection lot on.
    Regards,
    Chris

    you cannot do quality inspections of bins, you can only do quality inspection of material stock .
    the quality inspection in QM module is carried out at inventory managment level.
    an inspection lot is created with QA01.
    This moves the stock into quality inspection.
    Along with the MM posting, a WM posting change notice (PCN) is created to move quantity from unrestricted use to Q-status in WM too. you then process this PCN with LU04 transaction. Here you allocate the quants that are effected.
    when the inspection is done, then a usage decision is made with QA11 transaction, which creates again a PCN in WM.

  • Generate Interim Storage Bins

    Hi,
    a SAP standard system in SPRO, Logistics Execution, Warehouse Management, Interfaces, Generate Interim Storage Bins contains any storage bin ?
    Best regards

    Hi,
    Goods transfers in the WM system are processed by means of movement types. In the definition of the
    movement types, it is possible to have interim storage bins addressed. you can have these bins generated automatically
    Example:
      According to the definition of the WM movement type 501 (GR without Purchase order), the material is posted to the material storage bin automatically.
    If you do not want to use this option, you have to create the storage bins maually using
    WM-Master Data-Storage Bin-Create-Manually
    Activities: Generate the interim storage bins for your warehouse numbers
    Thanks,
    DV

  • CO27 is showing blank values in Warehouse,Storage Type and Storage Bin

    Hi Gurus,
    I am using CO27 to generate pick-list for a production order. The pick-list is being used by Warehouse team to Goods Issue for the Production Order.
    However, the problem that I am facing is that in the pick-list generated from CO27 is showing blank values in Warehouse,Storage type and Storage bin.
    So, it is becoming difficult for the Warehouse to do the picking based on this pick-list.
    Could you please advice how the fields Warehouse,Storage Type and Storage bin can be populated in the Production Order pcik-list.
    Is these values are fetched from Material Master data or any other place?
    Thanks & Regards
    Subhasis

    Hello
    You should implement the following note:
    384427 - CO27/COIK: Storage bin is not displayed
    BR
    Caetano

  • Transferring of Storage Bins & Stock in newly Implemented Warehouse

    Dear all,
    I want to Transfer Storage Bins & Stock in newly Implemented Warehouse.
    Here IM is already there i.e there is stock in a IM.
    So please suggest.
    Regards,
    Rock

    Hi,
    Since you already have stock at IM level follow these steps:
    1. Create a dummy SLOC or use existing empty SLOC.
    2. Move stock to this SLOC using mvnt type 311
    3. Activate WM for current storage location,Deactivate TR creation for 311 mvt type in WM, uncheck negative stock for intrem storage type (922 or 921)
    4. Move stock back to WHS and create TOs using mvnt type 999 and transfer stock to respective storage bins. Since the storage bins are huge in number use LSMW tool to upload. Refer below link for better clarity.If the stock is in interim storage type transfer the stock to destination bins with 999 movement type. Thanking you.
    http://www.sap-img.com/warehouse/how-to-transfer-stock-to-storage-bin.htm
    Edited by: Padmasri Garapati on Oct 11, 2011 1:14 PM

  • Print of Storage Bin details in GR slip

    We have done goods receipt (GR) in a Storage location with is Warehouse managed.
    We have setting where the Transfer order is created and confirmed automatically as soon as GR is posted.
    We print the GR slip and we need the Storage bin to be printed for every line item. We need the destination Storage bin detail from the Transfer order created.
    Now is it possible to have this scenario?
    Which program is called first? Printing of GR or Creation of Transfer order?
    Please help me with the logic to get the Storage bin information in the Goods receipt slip.

    done

  • Stock transfer from storage bin to another storage bin.

    Hi,
    i would like to know the method to be followed in order to transfer the materials from one storage bin to another within the warehouse and also within a storage type.
    Also i would like to know how to transfer the material from one storage type to another.

    As everyone has mentioned above, to manually create TOs to transfer stock, use LT01 w/ movement type 999. However, this method is limited to a single material at a time.
    Depending on your scenario, you may want to set up storage type replenishment - where you regularly restock a smaller warehouse location from a larger one:
    Example: Small warehouse section with customer counter service & larger warehouse where bulk items and bulk quantities are stored
    Not sure if this is your scenario or not, but here goes:
    Requirement is to use the "Large, small" picking strategy for the receiving storage type.
    Material master records in that storage type need minimum and control quantities maintained on the WH2 tab
    Run (or schedule) program RLLNACH1 to automatically create transfer requirements to transfer stock from bulk storage to the smaller storage type - and then, depending on your config, either stop as TR or automatically post os TOs.
    Good luck

  • Creating dynamic storage bins

    When you define a movement type, you can set up the system to create dynamic storage bins in the assigned interim storage area. In this case, the system uses the document number which triggered the stock movement as the coordinates for the interim storage bin.
    For example, for a goods receipt, you can set up the system to use the purchase order number as the storage bin coordinates in the interim storage area for goods receipts.
    These coordinates only exist as long as the quant is in the interim storage bin; afterwards, they are deleted.
    Where do I do the config for the above scenario..
    I tried creating bins for interim storage typees in LX20....after creating an interim storage area through referencing standard ones in IMG... I cant understand how the system creates dynamic bins for the movement type. Please help

    LX20 is for static bins.
    The dynamic ones are created automatically by the system when the stock is moved to the area. 
    In the movement type configuration in the WM:
    (LE -> WM -> Activities -> Define movement types)
    Select your movement type and warehouse and make sure the SCR box is checked
    Also check that the field is mapped correctly for the dynamic bin in
    LE-> WM -> Activities -> Define Requirements
    Field Name is what is grabbed

  • Stop IM posting from interim storage bin

    Hi,
    We have a WM activated where the Transfer order is created and posted automatically when any material movement is posted.
    Now when the stock in WM is already allocated to delivery still its possible to post the IM.
    For e.g.
    1 peice of  material 'ABC'  is available in IM and also in warehouse. A outbound delivery is created which has trigered a transfer order. Now the stock is lying in 916 interim storage type.
    other user does a transfer posting movement (311 movement) of same material. Since the material is not available in the normal storage type, the transfer order is not created automatically.
    Now the stock lies in 921 interim storage type.
    I want to avoid such scenario. Is it possible to stop any posting in IM if the stock is not available in the normal storage type?
    Regards

    Hi Frenchy,
    Thanks for your valuable input. This was something new for me.
    I checked the settings in OMM8, the 'No stringent FIFO setting' is there for all the Interim storage type.
    I think this will not help because when the IM posting is done, since there is no stock in normal storage type, system is not creating a transfer order (as per customization which is to created TO automatically). It only creates a open transfer requirement without finding a source storage bin.
    However we have found another way to stop the posting. we have set a availability check rule to the transaction and movement type in IM which check the available stock during the posting and sets a waring/error message.
    However this is at IM level.
    Is it possible to stop the posting at IM via some setting in WM?
    Regards

  • Available stock shortfall of & in interim storage bin

    Hi gurus,
    I am doing the movement type 261 in MIGO with reference to a reservation.
    I am working with Warehouse Management and I want to know why the system is defined in automatic the storage type 100?
    When I am doing the movement 261, I know that I have stock in the storage type 007 and I am putting this, but, the system is showing the following error message:
    100000000026; Available stock shortfall of         10.000 M2 in interim storage bin
    Message no. L9040
    Diagnosis
    In Customizing, the setting is such that no negative stock is allowed in storage type 100.  However, this posting will cause negative stock to exist in storage bin HE01 of storage type 100.
    For my storage type 100 I do not have defined any strategy in the customising.
    Could you help me with this, please?
    Kind regards.
    SP

    Searching on the forum you can find threads about WM/PP interface settings.
    (Re: WM Staging - Supply area to Production prder)
    Whether WM/PP interface is active it depends on your config and master data as well.
    You should check:
    - config: SPRO > LE > WM > Interfaces > Define Production
    - master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
    In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
    In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
    100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

  • Report for Material - Storage Location - Storage Bin

    All SAP Gurus,
    Is there any standard report available in which we can find out the storage bins for list of materials?
    (We have not implimented Warehouse MAnagement)
    Regards,

    HI,
    You need to have Warehouse management in place in order to view the storage bins for materials,
    MMBE of MM cannot give you the idea of storage bins.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful.

  • T.code for viewing stock at storage bin

    Hi all,
    What is the t. code used for viewing the stock at storge bin?I know this is WM question but your help is appreciated.
    Regards,
    Shailendra

    Hi,
    Following are the T-Codes:
    LS26   Warehouse stocks per material
    LI05    Inventory History for Storage Bin
    LX02   Stock List
    LX03   Bin Status Report
    MB52  List fo warehouse stocks on hand
    Regards,
    Suresh' D.

  • Error while creating storage bin structure.....

    Hi,
    When I try to create bin structure for newly created warehouse and storage type, the systerm is giving the error message as below,
    "*Entry WH1 ST1 001 does not exist in T302 (check entry)"
    Can anyone tell what is the issue and how to solve?
    Thanks in advance,
    Abi

    Hi,
    Table T302 is storage section table. In below issue you have not created storage section 001 in storage type ST1 in warehouse WH1. Follow path SPRO>LE>WM>Master data>Define storage section.
    This'll resolve it.
    Reg,
    Sudhir

Maybe you are looking for